Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop ididit Products At Speedway Motors

ididit, inc. has been manufacturing quality 100% American Made steering columns & accessories since 1986. Their product line extends from Street Rods, Customs, Retrofits for Chevy, Ford, Jeep and Mopar. ididit also offers specialty columns for a multitude of applications such as your prized golf cart! When it's time to put a column in your vehicle make it the best... make it an ididit!

Featured Products
Ididit 1120160010 Shorty Tilt Steering Column, 16 Inch, Plain
Ididit 1120160010 Shorty Tilt Steering Column, 16 Inch, Plain
x
            When space under the dash or around your feet is at a premium, these columns will save you a bunch of grief! These columns have the same dimensions and features as the other Ididit columns, but are about half the length.  

The unpainted finish allows you to customize them in the color of your choice. The columns have the common 3/4" double "D" shaft and accept the '69-up GM steering wheels, adaptors and wiring harnesses and also use the "Swinger" drops on this website.

Use with the under dash mount listed, or design your own mount. Normal installation is two drops at the dash, attached to an adjustable under dash mount. U-joints, shaft and rod end bearings to be determined by the builder.

Ididit 1120280020 Tilt Wheel Steering Column, 28 Inch, Chrome
Ididit 1120280020 Tilt Wheel Steering Column, 28 Inch, Chrome
x
            Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
  • Self-canceling turn signals
  • 4-way flashers
  • Horn circuit
  • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
  • Chrome steel finish

Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

446-1228C Instructions (PDF)

Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
x
            Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
  • Self-canceling turn signals
  • 4-way flashers
  • Horn circuit
  • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
  • Chrome plated steel finish

Measures 32" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

446-1232C Instructions (PDF)

Ididit 2302470040 2.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
Ididit 2302470040 2.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
x
            

Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

  • For tilt column
  • 2 Inch diameter hole
  • 2-1/2 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

"Ididit" Page 1 of 4

  • Ididit 2503000040 Universal Billet Aluminum Knob, 3/16 Inch Bore
    Ididit 2503000040 Universal Billet Aluminum Knob, 3/16 Inch Bore
    x
                

    Universal billet aluminum switch knobs work great as a headlight switch knob, dash knob, door knobs, lock knob, wiper knob, or a radio knob. These 3/16" versions are retained with a set screw.

  • Ididit 1955-1968 Horn Adapter Kit
    Ididit 1955-1968 Horn Adapter Kit
    x
                
    • Horn adapter kit for 1955-68 stock/original equipment steering wheel to a '69-up GM/IDIDIT column

    Instructions (PDF)

  • Ididit 2802000010 2-1/4 Inch Column Mount Cable Shift Kit
    Ididit 2802000010 2-1/4 Inch Column Mount Cable Shift Kit
    x
                This is the slickest way to connect your column shifter to your tranny. If you are using the Ididit shorty column, this is a must. Includes column bracket to mount cable to Ididit columns, 6 foot cable and GM tranny brackets.
            
  • Ididit 2400020010 1962-67 Nova Floor Mount Steering Column Plate
    Ididit 2400020010 1962-67 Nova Floor Mount Steering Column Plate
    x
                This floor mount column plate works in conjunction with the 1962-66 & 1967 Nova Ididit steering columns.  These plates are made out of steel and come with all necessary hardware.
    • Painted steel finish
    • Hardware included
    • For 2" diameter steering columns
    • Lower floor mounting plate for 62-67 Nova
    • Works with Ididit columns (446-6266 & 446-6767)
  • Ididit 2302470040 2.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
    Ididit 2302470040 2.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

    • For tilt column
    • 2 Inch diameter hole
    • 2-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 2401800010 Adjustable Steering Column Floor Mount, 2 Inch
    Ididit 2401800010 Adjustable Steering Column Floor Mount, 2 Inch
    x
                

    This kit from Ididit offers security and a handsome appearance as well. Floor mount portion includes an adjustable mount with a polished aluminum trim ring with hardware. Then choose what color boot, part # 4462405-color you want and you have everything you need to complete the look. Black, Bone, Brown or Grey boots available. 

    1. Select (1) column mount diameter needed.
    2. Select (1) boot color needed, part # 4462405-color.
    446-2401 Instructions (PDF)
  • Ididit 2305480040 1932 Ford 5 Inch Steering Column Drop Mount 2 Inch
    Ididit 2305480040 1932 Ford 5 Inch Steering Column Drop Mount 2 Inch
    x
                

    These column drops are angle cut to fit the 1932 Ford dash. Fits tilt steering columns without column shift (2" O.D. tube). For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

    • For tilt column without column shift, 1932 Ford dash
    • 2 Inch diameter hole
    • 5 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

     

  • Ididit 1120160010 Shorty Tilt Steering Column, 16 Inch, Plain
    Ididit 1120160010 Shorty Tilt Steering Column, 16 Inch, Plain
    x
                When space under the dash or around your feet is at a premium, these columns will save you a bunch of grief! These columns have the same dimensions and features as the other Ididit columns, but are about half the length.  

    The unpainted finish allows you to customize them in the color of your choice. The columns have the common 3/4" double "D" shaft and accept the '69-up GM steering wheels, adaptors and wiring harnesses and also use the "Swinger" drops on this website.

    Use with the under dash mount listed, or design your own mount. Normal installation is two drops at the dash, attached to an adjustable under dash mount. U-joints, shaft and rod end bearings to be determined by the builder.

  • Ididit 2400800010 Adjustable Steering Column Floor Mount, 1-3/4 Inch
    Ididit 2400800010 Adjustable Steering Column Floor Mount, 1-3/4 Inch
    x
                

    This kit from Ididit offers security and a handsome appearance as well. Floor mount portion includes an adjustable mount with a polished aluminum trim ring with hardware. Then choose what color boot, part # 4462405-color you want and you have everything you need to complete the look. Black, Bone, Brown or Grey boots available. 

    1. Select (1) column mount diameter needed.
    2. Select (1) boot color needed, part # 4462405-color.
    446-2400 Instructions (PDF)
  • Ididit 2402300010 Steering Column Band Swivel Lower Mount, 2-1/4 Inch
    Ididit 2402300010 Steering Column Band Swivel Lower Mount, 2-1/4 Inch
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's steel band swivels are an easy and inexpensive solution.

    446-4030 Instructions (PDF)

  • Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
    Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 32" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1232C Instructions (PDF)

  • Ididit 1520690051 Plain Black Tilt Steering Column, 1969-72 Chevelle
    Ididit 1520690051 Plain Black Tilt Steering Column, 1969-72 Chevelle
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • For '69-'72 Chevelle
    • Bolt-In
    • Black powdercoated
    • 8 position tilt
    • With key
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • 3-7/8 wiring plug
    • 1" - 48 lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • Ididit 2402500040 Steering Column Ball Swivel Lower Mount, 2-1/4 Inch
    Ididit 2402500040 Steering Column Ball Swivel Lower Mount, 2-1/4 Inch
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's billet aluminum ball swivel style mounts make this task much easier.

    Note: This mount may require slight modification to the I.D. of the ball or O.D. of the column end due to variation between manufacturers. It is not for chrome columns.

    446-4250 Instructions (PDF)

  • Ididit 1250280010 28 In Pln Floor Shift Collapsible RH Drive Tilt Steering Column
    Ididit 1250280010 28 In Pln Floor Shift Collapsible RH Drive Tilt Steering Column
    x
                For the dedicated hobbyist overseas, the Ididit Collapsible Series RH Drive floor shift tilt columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Right Hand Drive Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available in paintable steel.
    • RH Drive
    • Paintable steel
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 1120300010 Tilt Wheel Steering Column, 30 Inch, Plain
    Ididit 1120300010 Tilt Wheel Steering Column, 30 Inch, Plain
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 30" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1230D Instructions (PDF)

  • Ididit 1120280010 Tilt Wheel Steering Column, 28 Inch, Plain
    Ididit 1120280010 Tilt Wheel Steering Column, 28 Inch, Plain
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1228D Instructions (PDF)

  • Ididit 1620860051 Black Tilt Steering Column, 1970-75 Camaro
    Ididit 1620860051 Black Tilt Steering Column, 1970-75 Camaro
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • For '70-'75 Camaro
    • Bolt-In
    • Black powdercoated
    • 8 position tilt
    • With key
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • Collapsible
    • 1970 -74  use 3-7/8" wiring plug
    • 1975 uses a 4-1/4" wiring plug
    • 1" - 48 spline lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • Ididit 1130330020 Tilt Wheel Steering Column w/ Shift, 33 Inch, Chrome
    Ididit 1130330020 Tilt Wheel Steering Column w/ Shift, 33 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 33" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1333C Instructions (PDF)

  • Ididit 1120642020 1964-66 Mustang Tilt Steering Column, Chrome
    Ididit 1120642020 1964-66 Mustang Tilt Steering Column, Chrome
    x
                

    Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount. The wiring is also easy to hook-up. Requires you to modify the original input shaft on the steering box and you will need coupler 446-3449 that is sold separately.

    • Chrome plated steel finish 
    • Accepts stock steering wheels 
    • Self-Canceling Turn Signals
    • 8-Position Tilt
    • 4-Way Flashers
    • Knobs and Handles
    • Ford Turn Signal Switch
    • Ford Top Shaft
    • Floor Mount included
    • 3/4"-36 Lower Shaft

    446-6466C Instructions (PDF)

  • Ididit 1963-65 Chevy II/Nova Steering Column Wiring Harness 4-Way Adapter Kit
    Ididit 1963-65 Chevy II/Nova Steering Column Wiring Harness 4-Way Adapter Kit
    x
                This wiring harness kit is used to easily adapt your vehicles stock wiring to your Ididit steering column. This harness also adds the convenience of a 4-way flasher that was not available back in the day, in case you ever need it.
    • 1963-1965 Chevy-II/Nova
    • 1963-1966 Chevy Pickup
    • 1963-1966 Bel-Air/Impala/Biscayne/Caprice Wiring Harness Adapter & 4-Way Flasher Kit
    • Made in America
  • Ididit 3000313449 Steering Coupler, 3/4 Inch-36 Spline to 3/4 Inch DD
    Ididit 3000313449 Steering Coupler, 3/4 Inch-36 Spline to 3/4 Inch DD
    x
                

    No-shift columns use 1" DD u-joints, while shift columns use 3/4"-36 spline u-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

    Steering U-Joints and Couplers Application Chart (GIF)

    Steering Box/Rack/Spline Chart (Link)

    Spline Size (Link)

     

  • IDIDIT 1250280020 Chrome Right Hand Drive Collapsible Steering Column, 28 Inch
    IDIDIT 1250280020 Chrome Right Hand Drive Collapsible Steering Column, 28 Inch
    x
                

    The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the tandard dress-up kit.

    • RIGHT HAND DRIVE
    • Chrome steel
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 1130651020 1947-54 GM Pickup Tilt Column with Shifter, Chrome
    Ididit 1130651020 1947-54 GM Pickup Tilt Column with Shifter, Chrome
    x
                Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our coupler 446-5249.
            
  • Ididit 1130280020 Tilt Wheel Steering Column w/ Shift, 28 Inch, Chrome
    Ididit 1130280020 Tilt Wheel Steering Column w/ Shift, 28 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1328C Instructions (PDF)

  • Ididit 1300644020 1968 Mustang Tilt Steering Column, Chrome
    Ididit 1300644020 1968 Mustang Tilt Steering Column, Chrome
    x
                

    Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount. The wiring is also easy to hook-up. Column is a straight bolt-in when used with the new rag joint (also sold separately). 

    • Accepts stock steering wheels 
    • Self-Canceling Turn Signals
    • 8-Position Tilt
    • 4-Way Flashers
    • Knobs and Handles
    • Ford Turn Signal Switch
    • Ford Top Shaft
    • Floor Mount included
    • 3/4" 36 Lower Shaft
    • Collapsible
    • Chrome plated steel finish

    446-6869C Instructions (PDF)

  • Ididit 1300280010 28 Inch Plain Floor Shift Collapsible Tilt Steering Column
    Ididit 1300280010 28 Inch Plain Floor Shift Collapsible Tilt Steering Column
    x
                
    The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit.
    • Paintable steel
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 1300320020 32 Inch Chrome Floor Shift Collapsable Tilt Steering Column
    Ididit 1300320020 32 Inch Chrome Floor Shift Collapsable Tilt Steering Column
    x
                The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available a chrome plated finish.
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 2301000010 Adjustable Under Dash Mount
    Ididit 2301000010 Adjustable Under Dash Mount
    x
                

    Adjustable Under Dash Mount. 

    NOTE: This item will not work with Speedway column drops.

  • Ididit 1120652010 1955-59 GM Pickup Tilt Steering Column, Plain
    Ididit 1120652010 1955-59 GM Pickup Tilt Steering Column, Plain
    x
                Original equipment steering columns are loaded with unsightly brackets,  tabs and switches. These columns are much cleaner in appearance and  eliminate the column-mounted key switch. These non-shift versions  feature a 2" O.D. column tube. 

    Each has a standard GM 3-7/8" wire harness, 8-position tilt, and accept stock 1955-59 GM pickup steering wheels or our custom wheels with an adapter (sold separately).

    • 8 position tilt
    • Self canceling turn signal
    • 4 way flashers
    • Knobs & Levers
    • 3-7/8" wiring plugs
    • 1" DD lower shaft
    • Includes: floor mount plate with gasket,delrin cover, with under dash column drop for easy installation
  • Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 3-1/2 Inch drop
    • Mount hole spacing is 2-7/8".
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 2305470040 5.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
    Ididit 2305470040 5.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

    • For tilt column
    • 2 Inch diameter hole
    • 5-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 1250320020 32 In Chrm Floor Shift Collapsible RH Drive Tilt Steering Column
    Ididit 1250320020 32 In Chrm Floor Shift Collapsible RH Drive Tilt Steering Column
    x
                
    For the dedicated hobbyist overseas, the Ididit Collapsible Series RH Drive floor shift tilt columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Right Hand Drive Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit.
    • RH Drive
    • Chrome finish
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 2401010010 2 Inch Floor Mount For Collapsible Column
    Ididit 2401010010 2 Inch Floor Mount For Collapsible Column
    x
                

    This 2 inch floor mount is designed to mount a steering column to the floor or firewall.  Allows the floor/firewall to move independently of the column in the event of impact.  It can be installed on either side of the firewall.  Installation of this mount is required when utlizing an Ididit collapsible steering column

    • Floor Mount
    • Used in conjunction with 2" collapsible steering columns

     

  • Ididit 1130280010 Tilt Wheel Steering Column w/ Shift, 28 Inch, Plain
    Ididit 1130280010 Tilt Wheel Steering Column w/ Shift, 28 Inch, Plain
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1328D Instructions (PDF)

  • Ididit 1120550020 1955-56 Chevy Tilt Steering Column, Chrome
    Ididit 1120550020 1955-56 Chevy Tilt Steering Column, Chrome
    x
                Make your 1955-1956 Chevy more comfortable to drive by installing a new ididit steering column. These tilt, non-shift columns move the steering wheel back 2" while the non-tilt leaves it in the stock location. 

    Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. No-shift columns use 1" DD U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

    446-1255C Instructions (PDF)

  • Ididit 1300300020 30 Inch Chrome Floor Shift Collapsable Tilt Steering Column
    Ididit 1300300020 30 Inch Chrome Floor Shift Collapsable Tilt Steering Column
    x
                The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available in a chrome plated finish.
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
Goto Previous PagePrevious Page
1 2 3 4