Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

If you're looking for a set of headers to really boost performance, look no further than Hooker Headers! Whether it's for your classic or a daily driver, you can trust 4 decades of proven performance. Made from mild steel with mandrel bends for optimal flow and machined flanges with MIG welds for strength and performance.

"Hooker Headers" Page 1 of 1

  • Hooker Headers 8501HKR LS Cast Iron Exhaust Manifolds
    Hooker Headers 8501HKR LS Cast Iron Exhaust Manifolds
    x
                Please view the product's page for more information
            
  • Hooker Headers 12624HKR LS Swap Engine Mount Adapter, 1/2 Inch Forward
    Hooker Headers 12624HKR LS Swap Engine Mount Adapter, 1/2 Inch Forward
    x
                

    Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount. 

    • Constructed of sturdy 3/8” thick hot rolled steel
    • Designed for lightweight, rigidity and a clean appearance
    • Precision machined for perfect alignment
    • Zinc plated for durability and corrosion resistance
    • Come complete with counter sink machine screws and instructions
    • Work with all small-block Chevy mounts and frame towers
    • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

    916-18020 Instructions (PDF)

  • Block Hugger Tight-Fit Headers for ZZ4 Crate Motor, AHC Coated
    Block Hugger Tight-Fit Headers for ZZ4 Crate Motor, AHC Coated
    x
                

    If you are lucky enough to have a GM small block crate motor with D-port heads (FastBurn, ZZ4, etc.) you will find that regular headers just don't work. These shorty headers were specifically designed for these heads. These tight-fit headers are ceramic coated headers that feature 1-5/8" primary tubes and 2-1/2" collectors with 2" reducers. Includes bolts and gaskets. The block hugger headers are designed to make difficult installations easy.

    • Collector exits parallel with the oil pan rail for maximum ground clearance
    • Made from lightweight & sturdy 18 gauge tubing
    • Tight-tuck design for narrow frame rails

    Header Dimensions (GIF)

  • Hooker Headers 12622HKR LS Swap Engine Mount Adapter, 3 Inch Forward
    Hooker Headers 12622HKR LS Swap Engine Mount Adapter, 3 Inch Forward
    x
                

    Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount.

    • Constructed of sturdy 3/8” thick hot rolled steel
    • Designed for lightweight, rigidity and a clean appearance
    • Precision machined for perfect alignment
    • Zinc plated for durability and corrosion resistance
    • Come complete with counter sink machine screws and instructions
    • Work with all small-block Chevy mounts and frame towers
    • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

    916-18018 Instructions (PDF)

  • Hooker Headers 12623HKR LS Swap Engine Mount Adapter, 1-1/4 In Forward
    Hooker Headers 12623HKR LS Swap Engine Mount Adapter, 1-1/4 In Forward
    x
                

    Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount.

    • Constructed of sturdy 3/8” thick hot rolled steel
    • Designed for lightweight, rigidity and a clean appearance
    • Precision machined for perfect alignment
    • Zinc plated for durability and corrosion resistance
    • Come complete with counter sink machine screws and instructions
    • Work with all small-block Chevy mounts and frame towers
    • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

    916-18019 Instructions (PDF)

  • Hooker Headers 12621HKR LS Swap Engine Mount Adapter 1.25 In-Clamshell
    Hooker Headers 12621HKR LS Swap Engine Mount Adapter 1.25 In-Clamshell
    x
                

    Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount.

    • Moves engine forward 1.25" and up 1/2" from original early style V8 position
    • Designed for applications that use the clamshell type mount such as a G–body
    • Constructed of sturdy 3/8” thick hot rolled steel
    • Designed for lightweight, rigidity and a clean appearance
    • Precision machined for perfect alignment
    • Zinc plated for durability and corrosion resistance
    • Come complete with counter sink machine screws and instructions
    • Work with all S/B Chevy clamshell mounts & frame towers
    • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

    LS Swap Engine Mount Adapter Instructions (PDF)

  • Hooker Headers Tin Signs
    $19.99
    $29.99
    Hooker Headers Tin Signs
    x
                Tin Signs show support for your favorite performance parts companies. These large, high-quality embossed metal signs feature bold, stylish designs and the Hooker Headers company logo.  
            
  • Block Hugger Tight-Fit Headers for ZZ4 Crate Motor, Plain
    Block Hugger Tight-Fit Headers for ZZ4 Crate Motor, Plain
    x
                

    If you are lucky enough to have a GM small block crate motor with D-port heads (FastBurn, ZZ4, etc.) you will find that regular headers just don't work. These block hugger headers were specifically designed for these heads. Features 1-5/8" primary tubes and 2-1/2" collectors with 2" reducers. Includes bolts and gaskets. These shorty headers have a tight-tuck design for narrow frame rails to make difficult installations easy.

    • Collector exits parallel with the oil pan rail for maximum ground clearance
    • Made from lightweight & sturdy 18 gauge tubing
    • Tight-tuck design for narrow frame rails

    Header Dimensions (GIF)

  • Hooker Headers 12611HKR LS Swap Engine Mount Adapter, Stock Location
    Hooker Headers 12611HKR LS Swap Engine Mount Adapter, Stock Location
    x
                

    Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount. 

    • Constructed of sturdy 3/8” thick hot rolled steel
    • Designed for lightweight, rigidity and a clean appearance
    • Precision machined for perfect alignment
    • Zinc plated for durability and corrosion resistance
    • Come complete with counter sink machine screws and instructions
    • Work with all small-block Chevy mounts and frame towers
    • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

    916-18021 Instructions (PDF)

  • Garage Sale - Block Hugger Tight-Fit Headers for ZZ4 Crate Motor, AHC Coated
    Garage Sale
    Garage Sale - Block Hugger Tight-Fit Headers for ZZ4 Crate Motor, AHC Coated
    x
                Please view the product's page for more information