Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Holley Products At Speedway Motors

Holley Carb products have been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR, Sprint Cup team, and every NHRA Pro Stock champion for four decades. Holley's carb products include performance fuel pumps, fuel injection, intake manifolds, cylinder heads & engine dress-up products for street performance, race and marine applications.

Featured Products
Holley 12-801-1 97 GPH Red Electric Fuel Pump
Holley 12-801-1 97 GPH Red Electric Fuel Pump
SKU-42512801
x
            

Holley's Red Electric fuel pump is a standard pressure street pump for gas only.  It has a pressure preset of 7 psi and a free flow capacity of 97 gph. It flows 67 gph while maintaining 5 psi. No regulator required. Has a 3/8" NPT inlet and outlet.

  • Tumble polished billet look
  • Improved design for street/strip applications
  • Distinctive "Red" logo
  • Flows 97 GPH (free flow)
  • Flows 71 GPH at 4 PSI
  • Regulator is not required
  • Motor draws only 2 amps current
  • 7-1/2 Amp fuse recommended
  • Provides constant fuel flow with no pulsation
  • Has externally accessible pressure relief valve (max 7 PSI)
  • Rotor/Vane pump design is more tolerant of contaminated fuels
  • New lower housing casting for enhanced fuel flow and quieter operation
  • Weighs only 2.88 lbs.
  • Includes mounting bracket
  • Repair kits are readily available
  • NOT compatible with alcohol or methanol fuels
  • Use of safety shut-off switch strongly recommended
  • Not designed or recommended for use with fuel injection systems
  • 3/8 NPT inlet/outlet

425-12801 Instruction Sheet (PDF)

Fuel Pump Tech Info (PDF) 

Holley 0-80583-1 Keith Dorton Racing 2 Barrel Carburetor, 500 CFM
Holley 0-80583-1 Keith Dorton Racing 2 Barrel Carburetor, 500 CFM
SKU-42580583
x
            Carb guru Keith Dorton designed this two barrel carb for maximum performance.  Purpose built for short-track racing means this two barrel carb has a welded throttle lever and shaft.  The lack of choke provisions provides smoother airflow.  Throttle shaft hole is plugged to eliminate leaks and its stainless stell bypass holes make for a smooth idle.  All bore, throttle plate, venturi and critical sizes are within factory specifications.
  • No vacuum or PCV holes
  • 30cc accel pump for smoother off the corner performance
  • Power valve blowout protection
  • Button head throttle plate screws with thread locker
  • Screw-in air bleeds for precise tuning
  • HP metering block for strnght
  • Maximum fuel flow factory flowed to ensure quality
  • Reusable fuel bowl screw gaskets
Holley 0-1850SA 4160 Aluminum 600 CFM 4 Barrel Carburetor Manual Choke
Holley 0-1850SA 4160 Aluminum 600 CFM 4 Barrel Carburetor Manual Choke
SKU-42501850
x
            

Holley's new Model 4160 600 CFM aluminum street four barrel carburetor is constructed from aluminum, which compared to its zinc counterpart equates to a weight savings of over 5 lbs. This Holly carburetors new aluminum will hold its shine and can also be hand polished for a custom look.

  • Vacuum secondaries allow use on wide variety of vehicles
  • Manual choke
  • Single feed fuel inlet
  • Calibrated for excellent street performance
  • Ford A/T kickdown, does not work with A.O.D. transmissions
  • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
  • Performance upgrade for stock to mildly modified vehicles
  • Universal calibration for easy bolt-on performance

Holley 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

Holley 0-4412CT Circle Track 500 CFM 2 Barrel Carburetor
Holley 0-4412CT Circle Track 500 CFM 2 Barrel Carburetor
SKU-42504412
x
            This 500cfm 4412CT Holly carb shares the hugely  successful features of the original 4412C but with a couple changes  aimed for circle track cars. The choke has been removed but the horn  remains and has been specially calibrated for circle track use. The  4412C Holley carb is easily the most winningest two barrel carburetor on the market  and comes out of the box ready to run. 

Features:
  • Choke delete
  • Choke horn remains
  • 50cc accelerator pump
  • 1 timed (spark) port, 1 full vacuum, & 1 PCV port
  • The mandated carbs for many oval track racing sanctioning bodies
  • Calibrated specifically for circle track use

"Holley" Page 1 of 4

  • Weiand Blue Retro T-Shirt
    From: $15.99
    Product Rating: 5.00 Stars
    Weiand Blue Retro T-Shirt
    SKU-8051002
    x
                Show the world that you care about hot rodding heritage with a retro-style t-shirt from a big name in the industry - Weiand. 
            
  • Holley 0-80670 Avenger 670 CFM 4 Barrel Carburetor, Electric Choke
    Holley 0-80670 Avenger 670 CFM 4 Barrel Carburetor, Electric Choke
    SKU-42580670
    x
                

    The Holley Street Avenger Model 4150 four barrel carb is the ultimate vacuum secondary street performance upgrade. This 4 barrel carb is street ready right out of the box and features a calibrated electric choke, air and fuel adjustments and built in fuel filters. There are clear sights for easy float adjustments, adjustable vacuum secondaries and four vacuum ports. Plus it has a million mile power valve, is 100% wet flow tested and includes fittings.

    • No Trouble quick change vacuum secondaries - up to 6% more acceleration or 5% better fuel economy with simple spring change (springs included) 
    • Vacuum secondaries allow use on wide variety of vehicles
    • Tuneable fuel metering system
    • Dual feed fuel inlet
    • 1 timed (spark) port, 2 full vacuum, and 1 PCV port
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • Calibrated for monster low-end torque, awesome acceleration, & unmatched top-end horsepower
    • Bolt on & go design
    • Electric choke

    Holley 670 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 302-1 LS Series Retro-fit Oil Pan
    Holley 302-1 LS Series Retro-fit Oil Pan
    SKU-4253021
    x
                

    GM's popular LS engines are finding their way into a large variety of vehicles. They make great power, plus they're very durable and reliable. Unfortunately, the factory LS pans don't always fit or they hang too low for today's hot rods. Holley's new LS Retro–fit Engine Oil Pan is designed to help! It provides maximum clearance to the chassis and ground, plus provides an OEM fitment for durability and proper sealing.

    • Provides OEM fitment– OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity and OEM bell-housing attachments
    • Traditional high-quality cast aluminum appearance with clean exterior styling
    • Provides maximum clearance to chassis
    • Cast and machined aluminum
    • Complete kit including sump baffle, pick-up tube, sump plug & oil filter stud
    • Fits GM rear wheel drive applications that were originally equipped with a Small Block or Big Block Chevy engine and traditional rear sump oil pan*

    Holley Oil Pan Installation Instructions (PDF)

    Specs Chart (GIF)

  • Holley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/C
    Holley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/C
    SKU-42520132
    x
                Please view the product's page for more information
            
  • Holley 12-327-13 Small Block Chevy Racing Mechanical Fuel Pump-130 GPH
    Holley 12-327-13 Small Block Chevy Racing Mechanical Fuel Pump-130 GPH
    SKU-425123272
    x
                

    If you are looking for a high flow fuel pump you can depend on night after night, this is it! Holley's high output, heavy duty mechanical fuel pumps are constructed of rugged materials and feature fuel body castings that can be rotated to accommodate various plumbing situations. 3/8" NPT inlet and outlet.

    For use with gasoline only. NOT for use with alcohol.

    • High output fuel flow
    • Heavy duty construction for continuous high RPM performance
    • Six high flow valves ensure adequate and continuous fuel flow
    • Extra beefy steel rocker arm to help withstand severe race usage
    • Inlet & outlet tapped for 3/8" NPT

    Holley Pump Tech Info (PDF)

  • Holley 34-25 Quick Change Primary Float Bowl
    Holley 34-25 Quick Change Primary Float Bowl
    SKU-4253425
    x
                Update your Holley 4150/4160 carb with quick change float bowls. Includes gaskets and plugs. For center hung float bowl. Also includes jet driver. 

    NOTE: Primary and secondary bowls are not interchangeable!

    425-3425 Instruction Sheet (PDF)

  • Holley 36-182 4150 Carb Tuning-Calibration Kit
    Holley 36-182 4150 Carb Tuning-Calibration Kit
    SKU-42736182
    x
                

    This tuning kit contains a selection of main jets, pump nozzles and power valves in popular sizes. All contained in a handy and durable plastic case. Gaskets are included to facilitate carburetor reassembly.

    For gasoline carbs only. Fits Model 4150 "Double Pumper" carburetors.

    • 4 Each - 8 Metering Jet Sizes ranging from #70-84
    • 2 each #35 and # 37 pump nozzles
    • 3 Power Valves sizes 3.5, 4.5 and 5.0
    • 12 Metering Block Gaskets
    • 12 Fuel Bowl Gaskets
    • Misc. Pump Nozzle
    • Misc. Power Valve
    • Misc. Fuel Bowl Screw, pump nozzle and power valve Gaskets
  • Holley 37-1536 Performance Carburetor Renew Rebuild Kit
    Holley 37-1536 Performance Carburetor Renew Rebuild Kit
    SKU-427371536
    x
                

    Each Holley Renew Kit carburetor rebuild kit contains all parts and gaskets that are necessary to restore “like new” performance to your four barrel carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with a quality Holley Renew Kit repair kit. It's your guarantee for trouble–free cruising.

    • Serves all Holley Performance Carburetors
    • Genuine Holley quality parts
    • Extra parts for performance tuning
    • Step-by-step instructions
    • Detailed tuning guide
    • Packaging also parts tray
    • Includes:
      • Gaskets
      • O-Rings
      • Pump Diaphragm
      • Needle & Seat
      • Power Valve 
      • Step-By-Step Instructions
      • Detailed Tuning Guide

    427371536 Carb Rebuild Manual (PDF)

    427371536 Carb Exploded View (PDF) 

    427371536 Carb Kit Specifications (PDF) 

    427371536 Carb Addendum (PDF) 

  • Holley 37-485 4150 4 Barrel Carburetor Rebuild Renew Kit
    Holley 37-485 4150 4 Barrel Carburetor Rebuild Renew Kit
    SKU-42737485
    x
                

    These kits give you the parts required to bring your Holley four barrel carb back to original specifications and "like new" condition. The Renew Kit package includes new gaskets, O-rings, pump diaphragms, needle and seats, power valves, and a detailed instruction sheet to take you step-by-step through the rebuilding process. 

    427-37485 Instructions (PDF)

  • Holley 37-1539 4150 4 Barrel Alcohol Carburetor Rebuild Master Kit
    Holley 37-1539 4150 4 Barrel Alcohol Carburetor Rebuild Master Kit
    SKU-427371539
    x
                

    Each Holley Renew Kit carburetor rebuild kit contains all parts and gaskets that are necessary to restore “like new” performance to your four barrel carburetor. Detailed instructions are also included to guide you through the rebuilding process.

    Kit includes: 

    • Gaskets
    • O-Rings
    • Pump Diaphragms
    • Needle & Seats
    • Power Valves
    • Step-By-Step Instructions
    • Detailed Tuning Guide

    427-71539 Instructions (PDF)

  • Holley 0-86770HB Ultra Street Avenger 770 CFM 4 Barrel Carburetor
    Holley 0-86770HB Ultra Street Avenger 770 CFM 4 Barrel Carburetor
    SKU-42586770
    x
                Please view the product's page for more information
            
  • Holley 17-14   5.125 x .75 Inch Air Cleaner Spacer
    Holley 17-14 5.125 x .75 Inch Air Cleaner Spacer
    SKU-4251714
    x
                

    These air cleaner to carburetor spacers are perfect for fitting your air cleaner to a Street Demon carburetor.  They also allow you to raise the filter up for additional clearance.

    • Air cleaner to carb spacer
    • Durable construction 
    • .75 x 5.125 Inch
  • Holley 37-1544 4150 4 Barrel Carburetor Rebuild Fast Kit
    Holley 37-1544 4150 4 Barrel Carburetor Rebuild Fast Kit
    SKU-427371544
    x
                

    These kits are ideal for a quick refresher of your four barrel Holley carb. Each kit includes step-by-step instructions and a detailed tuning guide. Fits 650 CFM and 750 CFM carburetors.

    427-371544 Instructions (PDF)

  • Holley 0-7448 350 CFM Gas 2 Barrel Carburetor
    Holley 0-7448 350 CFM Gas 2 Barrel Carburetor
    SKU-4257448
    x
                

    Holley Model 2300 two barrel carburetors are great for improving or updating many stock Chrysler and Ford car and truck applications. The 350 CFM 2 barrel carburetor is ideal for small blocks. It features a manual choke, center hung float bowl, universal throttle lever, power valve blow-out protection, blue non-stick gaskets, and Fort A/T kickdown.

    • Power Valve Blow-out Protection for trouble-free operation
    • Manual choke
    • Center Hung Float bowl
    • Factory set 30cc accelerator pump for excellent off-idle performance
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • Dichromate finish for a classic, period look that will last

    Holley 350 CFM 2 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-76750HB 750 CFM Ultra Double Pumper 4 Barrel Carb
    Holley 0-76750HB 750 CFM Ultra Double Pumper 4 Barrel Carb
    SKU-42576750
    x
                

    The new Ultra Double Pumper four barrel carburetors have an enhanced fuel curve for optimum performance, with many more features such as aluminum construction; Hard Core Gray™ finish w/ black anodized billet aluminum metering blocks and base plate; 4 corner idle for precise idle control; mechanical secondaries for great performance; clear fuel level sight plugs for easy, no mess fuel level adjustments; Ford automatic transmission kickdown for use on popular Ford transmissions; four vacuum ports for all necessary vacuum accessories; and for the first time on a Double Pumper, factory pre–set electric choke for easy, fast cold start–ups.

    • ULTRA light – aluminum construction for 36% weight savings
    • ULTRA strong – billet metering blocks & base plates
    • ULTRA cool – Hard Core Gray™ w/ black anodized billet aluminum metering blocks and base plate
    • ULTRA easy – built in sight window for simple float adjustments
    • ULTRA fast – high performance fuel curves

    Holley Double Pumper Carburetor Installation Instructions (PDF)

  • Holley 0-80787-1 Keith Dorton HP 350 CFM Gas 2 Barrel Carburetor
    Holley 0-80787-1 Keith Dorton HP 350 CFM Gas 2 Barrel Carburetor
    SKU-42780787
    x
                This is the top of the line two barrel carb.  The famed carb guru, Keith Dorton, designed and massaged this two barrel carb to give you maximum performance.  Race ready features include: 

     

    • Purpose built for short track racing.
    • No choke provisions provides smoother airflow.
    • No vacuum or PCV holes.
    • 30 cc accel. pump for smoother "off the corner" use.
    • Power valve blowout protection
    • Button head throttle plate screws are loctited.
    • Screw-in air bleeds for precise tuning.
    • HP metering block for strength.
    • Factory flowed to insure quality.
    • Reusable fuel bowl screw gaskets.
    • Throttle shaft hole plugged to eliminate leaks.
    • Stainless steel throttle plates with air bypass holes for smooth idle.
    • All bore, throttle plate, venturi & critical sizes are to factory spec.
    • Welded throttle lever and shaft.
    Holley 2 Barrel Carb Installation Instructions (PDF)
  • Holley 116-2 Brass Center Hung Float
    Holley 116-2 Brass Center Hung Float
    SKU-4271162
    x
                This Holley replacement brass carburetor float is for center hung float bowls.
            
  • Holley 37-720 Renew 4 Barrel Carb Rebuild Kit, Model 4160, 390 CFM
    Holley 37-720 Renew 4 Barrel Carb Rebuild Kit, Model 4160, 390 CFM
    SKU-42737720
    x
                

    Rebuild kit for Holley Model 4160 four barrel 390 CFM carburetor.

    427-37720 Instructions (PDF)

  • Holley 0-80570 Avenger 570 CFM 4 Barrel Carburetor, Electric Choke
    Holley 0-80570 Avenger 570 CFM 4 Barrel Carburetor, Electric Choke
    SKU-42580570
    x
                

    The Holley Street Avenger Model 4150 four barrel carb is the ultimate vacuum secondary street performance upgrade. This four barrel carb is street ready right out of the box and features a calibrated electric choke, air and fuel adjustments and built in fuel filters. There are clear sights for easy float adjustments, adjustable vacuum secondaries and four vacuum ports. Plus it has a million mile power valve, is 100% wet flow tested and includes fittings.

    • No Trouble quick change vacuum secondaries
    • Up to 6% more acceleration or 5% better fuel economy with simple spring change (springs included)
    • Vacuum secondaries allow use on wide variety of vehicles
    • Tuneable fuel metering system
    • Dual feed fuel inlet
    • 1 timed (spark) port, 2 full vacuum, and 1 PCV port
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • Calibrated for monster low-end torque, awesome acceleration, & unmatched top-end horsepower
    • Bolt on & go design
    • Electric choke

    Holley Carb Installation Instructions (PDF)

  • Holley Wedged Float for Secondary Bowl
    $23.99
    $34.99
    Holley Wedged Float for Secondary Bowl
    SKU-42711614
    x
                Made specially for the circle track carb. The fuel rides up the wedge and does not shut the fuel off sooner than it should.
            
  • Holley 10829-5 4150 Metering Block Gasket
    Holley 10829-5 4150 Metering Block Gasket
    SKU-42710829
    x
                For Holley double pumper carbs. Package of five gaskets.
            
  • Holley 0-80804HB Ultra HP Gas 4 Barrel Carburetor, 850 CFM
    Holley 0-80804HB Ultra HP Gas 4 Barrel Carburetor, 850 CFM
    SKU-42580804
    x
                

    Holley HP™ four barrel Carburetors have been the standard in racing carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

    New Features! (LINK)

    Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

    Holley 850 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 12-704 Big Port Adjustable Fuel Pressure Regulator, 4.5-9 PSI
    Holley 12-704 Big Port Adjustable Fuel Pressure Regulator, 4.5-9 PSI
    SKU-42512704
    x
                

    This universal fuel regulator regulates pressure from 4-1/2 to 9 PSI. This fuel pump regulator has one 1/2" NPT inlet and two 1/2" NPT outlet ports. Works with low pressure carbureted systems and as an alcohol fuel regulator.

    • Includes mounting hardware and AN style fittings
    • Alcohol compatible
    • .437" (7/16") restriction

    425-12704 Instructions (PDF)

  • Holley 12-805 Red Electric Fuel Pump Check Valve Rebuild Kit
    Holley 12-805 Red Electric Fuel Pump Check Valve Rebuild Kit
    SKU-42512805
    x
                

    For servicing of Holley Red electric fuel pump check valve and filter screen.

    425-12805 Instructions (PDF)

  • Holley 12-327-11 Small Block Chevy Racing Mechanical Fuel Pump-110 GPH
    Holley 12-327-11 Small Block Chevy Racing Mechanical Fuel Pump-110 GPH
    SKU-42512327
    x
                
    • Competition 110 GPH 
    • High output performance
    • 6-1/2 - 8 PSI
    • Heavy duty construction for continuous high RPM performance
    • Six high flow valves ensure adequate and continuous fuel flow
    • Repair kits are readily available to replace critical components
    • Features an extra beefy rocker arm casting to help withstand severe race usage.
    • 3/8" NPT inlet/outlet
    • Gasoline only
  • Holley 26-102 Nylon Fitting Gasket: 7/8 Inch
    Holley 26-102 Nylon Fitting Gasket: 7/8 Inch
    SKU-42726102
    x
                
    • 7/8"
    • Nylon
    • 2 per package
  • Holley 34-504 Chrome Accelerator Pump Cover, 30cc
    Holley 34-504 Chrome Accelerator Pump Cover, 30cc
    SKU-42734504
    x
                

    Chrome plated accelerator pump covers for Holley carburetors with 30cc accelerator pumps. Includes screws.

  • Holley 12-834 1958-1976 Small Block Chevy Street Fuel Pump
    Holley 12-834 1958-1976 Small Block Chevy Street Fuel Pump
    SKU-42512834
    x
                

    These all-new (not rebuilt) mechanical fuel pumps from Holley have a 7-1/2 psi shut-off pressure and deliver 80 GPH. The adjustable lower housing permits fuel ports (1/4" NPT) to be rotated for best fuel line access. Pump fittings not included and offered separately. These pumps are a flash chrome and not show quality.

    • High Output Fuel Flow
    • Flows 80 GPH Free Flow
    • Shutoff Pressure Pre-set 7.5 PSI
    • Fuel Pressure Regulator is Not Required
    • Heavy Duty Construction For Continuous High RPM Operation
    • Fuel Body Casting Can Be Rotated to Accommodate Various Plumbing Situations
    • Inlet & Outlet Tapped For 1/4" NPT

    Holley Pump Tech Info (PDF)

  • Holley 0-80770 Avenger 770 CFM 4 Barrel Carburetor, Electric Choke
    Holley 0-80770 Avenger 770 CFM 4 Barrel Carburetor, Electric Choke
    SKU-42580770
    x
                

    The Holley Street Avenger Model 4150 carb is the ultimate vacuum secondary street performance upgrade. This carb is street ready right out of the box and features a calibrated electric choke, air and fuel adjustments and built-in fuel filters.  There are clear sights for easy float adjustments, adjustable vacuum secondaries and four vacuum ports. Plus it has a million mile power valve, is 100% wet flow tested and includes fittings.

    • No Trouble quick change vacuum secondaries - up to 6% more acceleration or 5% better fuel economy with simple spring change (springs included) 
    • Vacuum secondaries allow use on wide variety of vehicles
    • Tuneable fuel metering system
    • Dual feed fuel inlet
    • 1 timed (spark) port, 2 full vacuum, and 1 PCV port
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • Calibrated for monster low-end torque, awesome acceleration, & unmatched top-end horsepower
    • Bolt on & go design
    • Electric choke

    Holley 770 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel Carburetor
    Holley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel Carburetor
    SKU-42580802
    x
                

    Holley HP™ Carburetors have been the standard in racing four barrel carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

    New Features! (LINK)

    Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

    Holley 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley Wedged Float for Secondary Bowl with Jet Ext.
    Holley Wedged Float for Secondary Bowl with Jet Ext.
    SKU-42711615
    x
                

    Made specially for the circle track carb. The fuel rides up the wedge and does not shut the fuel off sooner than it should.

  • Holley Main Jets
    $7.99
    Product Rating: 4.50 Stars
    Holley Main Jets
    SKU-427122
    x
                Threaded, easy install and replacement. Available in #45 to #100.
            
  • Holley 64280 Hi-Tek Air Cleaner
    $329.99
    $359.99
    Holley 64280 Hi-Tek Air Cleaner
    SKU-20064280
    x
                Highly polished cast aluminum housing with 2 high flow air cleaners (K&N style). 18" x 8" x 3" tall. Fits all popular 5-1/8" neck carburetors.  Has Holley logo.
  • Holley 0-8007 4160 Street 390 CFM 4 Barrel Carburetor
    Holley 0-8007 4160 Street 390 CFM 4 Barrel Carburetor
    SKU-4258007
    x
                

    The Holley Model 4160 390 CFM four barrel carb features vacuum secondaries, side hung float bowls, electric choke (12 volt) and Ford auto-trans kickdown provision, which make for an easy-to-tune street driven 4 barrel carb for your Flathead, six cylinder or other small V-8 application. For use on a wide variety of vehicle weights, gearing and transmissions to allow smooth opening of secondaries

    • Electric choke for easy warm up 
    • Single inlet square fuel bowls
    • Power valve blow-out protection
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • 100% wet-flow tested and calibrated for street drivability

    Holley 390 CFM 4 Barrel Carburetor Installation Instructions (PDF)

     

  • Weiand Retro T-Shirt
    From: $15.99
    Product Rating: 5.00 Stars
    Weiand Retro T-Shirt
    SKU-8051000
    x
                Show the world that you care about hot rodding heritage with a retro-style t-shirt from Weiand. Available in sizes L-XXL. 
            
  • Holley 0-76650HB 650 CFM Ultra Double Pumper 4 Barrel Carburetor
    Holley 0-76650HB 650 CFM Ultra Double Pumper 4 Barrel Carburetor
    SKU-42576650
    x
                

    The new Ultra Double Pumper four barrel carburetors have an enhanced fuel curve for optimum performance, with many more features such as aluminum construction; Hard Core Gray™ finish w/ black anodized billet aluminum metering blocks and base plate; 4 corner idle for precise idle control; mechanical secondaries for great performance; clear fuel level sight plugs for easy, no mess fuel level adjustments; Ford automatic transmission kickdown for use on popular Ford transmissions; four vacuum ports for all necessary vacuum accessories; and for the first time on a Double Pumper, factory pre–set electric choke for easy, fast cold start–ups.

    • ULTRA light – aluminum construction for 36% weight savings
    • ULTRA strong – billet metering blocks & base plates
    • ULTRA cool – Hard Core Gray™ w/ black anodized billet aluminum metering blocks and base plate
    • ULTRA easy – built in sight window for simple float adjustments
    • ULTRA fast – high performance fuel curves

    Instructions (PDF)

  • Holley 108-1 Fitting Gasket, 9/16 Inch
    Holley 108-1 Fitting Gasket, 9/16 Inch
    SKU-4271081
    x
                
    • For side hung float bowls
  • Holley 135-4 Secondary Diaphragm
    Holley 135-4 Secondary Diaphragm
    SKU-4271354
    x
                Secondary diaphragm replacement for vacuum secondary 4160 series carbs.
            
  • Holley 20-133 RF Compressor LS Acc Drive Brackets, Pass. Side AC
    Holley 20-133 RF Compressor LS Acc Drive Brackets, Pass. Side AC
    SKU-42520133
    x
                

    These accessory drive brackets from Holley are great when swapping a GM LS engine into a muscle car, truck, hot rod or other vehicle. These brackets were designed to deliver a factory style appearance, correct belt alignment, and factory stability.  Holley's kits supply the required brackets and hardware needed for installation.

    To determine correct application, these three easy steps will help get you going:

    • Step one is to determine your belt alignment based on your crank Pulley position on the engine you have.
    • Step two is to choose the Holley accessory drive brackets that you need (A/C, Alt & P/S or both).
    • Step three is to see which Holley installation kit your set–up requires to line up your accessories with your crank Pulley position. An application specific installation kit (part # 425211, 425212, or 425213) is REQUIRED for most applications.

    Note: When referring to guide links below, keep in mind that part numbers shown are MFG numbers without "425" prefix.

    Fitment and Required Components Guide for 20-133 Bracket Kit (PDF)  

    Assembly Instructions for Holley 20-133 Accessory Drive Kit (PDF)   

  • Holley 12-803 Fuel Pressure Regulator, 2-Port, 4.5-9 PSI
    Holley 12-803 Fuel Pressure Regulator, 2-Port, 4.5-9 PSI
    SKU-42712803
    x
                

    These adjustable fuel pressure regulators from Holley can be adjusted from 4-1/2 to 9 PSI to regulate fuel pressure for various types of carburetors. Fuel pump regulator works well with Holley high performance fuel pumps. Use one fuel regulator per fuel bowl for high flow applications.

    This fuel pressure regulator has a 3/8" NPT gauge port and requires reducer 617-6157 to install a fuel pressure gauge.

    427-12803 Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3 4