Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Fittings and Hoses At Speedway Motors

Speedway Motors has hundreds of fuel line, water and oil line fittings and hose in stock and ready to ship! Plumb your race car, street rod, classic truck, or muscle car with fittings from top brands like Aeroquip, AFCO and Fragola. We stock everything from anodized AN fittings and power steering fittings to high-pressure stainless steel braided line, as well as all the tools needed to assemble and install them.

"Fittings and Hose, Fittings" Page 1 of 8

  • Russell Performance 639210 3/8 Inch Tubing to -6 AN Male Flare Adapter
    Russell Performance 639210 3/8 Inch Tubing to -6 AN Male Flare Adapter
    x
                

    Tubing to AN flare adapters are for use with aluminum tubing only (not steel tubing). 

    • Connects 3/8" aluminum tube to -6 AN adapters
    • Unique crimp design eliminates tube flaring
    • Not for use with fuel injection

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Black Socketless Straight Push-On Hose End Fitting, -6 AN
    Black Socketless Straight Push-On Hose End Fitting, -6 AN
    x
                

    Black socketless push-on hose end fittings will give your engine compartment the look you are after. Straight fittings in multiple sizes.  For use with 37 degree flared ends.

    • -6 AN female to push-on hose barb adapter
    • Straight style fuel line hose connector
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black anodized finish

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

     

  • Snap-In Grease Needle
    $7.99
    Product Rating: 1.00 Stars
    Snap-In Grease Needle
    x
                

    Inject grease into low profile grease zerks or hard to reach places with this adapter. Nipple snaps into your existing grease gun end.

     

  • Blue Straight AN6 Flare Adapter to 3/8 Inch Aluminum Pipe Fitting
    Blue Straight AN6 Flare Adapter to 3/8 Inch Aluminum Pipe Fitting
    x
                

    These straight flare adaptors connect 3/8" pipe to straight -6 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -6 AN to 3/8" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Threaded Steel Weld Bung Fitting, 1/8 Inch NPT Female
    Threaded Steel Weld Bung Fitting, 1/8 Inch NPT Female
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from steel and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Female weld bung fittings available in steel.

    Threaded Steel Weld Bung Fitting

    • 1/8 Inch NPT
    Fitting Thread Application Chart (GIF)
  • Blue Straight AN8 Flare Adapter to 3/8 Inch Aluminum Pipe Fitting
    Blue Straight AN8 Flare Adapter to 3/8 Inch Aluminum Pipe Fitting
    x
                

    These straight flare adaptors connect 3/8" pipe to straight -8 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -8 AN to 3/8" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Blue Straight AN6 Flare Adapter to 1/4 Inch Aluminum Pipe Fitting
    Blue Straight AN6 Flare Adapter to 1/4 Inch Aluminum Pipe Fitting
    x
                

    These straight flare adaptors connect 1/4" pipe to straight -6 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -6 AN to 1/4" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, Straight, Black Anodized, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, Straight, Black Anodized, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a straight design and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow push-on hose ends and see the difference.

    • -6 AN female to push-on style adapter
    • Straight
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Works great for custom fuel lines
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • 90 Degree Socketless Push-On Hose End, -6 AN
    90 Degree Socketless Push-On Hose End, -6 AN
    x
                

    90° socketless push-on hose ends for 37° fittings.

    Socketless Push-On Hose Ends Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, Straight, Red/Blue, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, Straight, Red/Blue, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then blue and red anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a straight design and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -6 AN
    • Straight
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • 90 Degree 3/8-24 IFF to 1/8 Inch NPT Male Adapter Fitting
    90 Degree 3/8-24 IFF to 1/8 Inch NPT Male Adapter Fitting
    x
                Brass 90° 3/8"-24 inverted flare female to 1/8" NPT male brake line adapter fitting. 
            
  • 90 Degree Socketless Push-On Hose End Fitting, -8 AN
    90 Degree Socketless Push-On Hose End Fitting, -8 AN
    x
                

    90° socketless push-on hose ends for 37° fittings.

    • -8 AN female to push-on hose barb adapter
    • 90° fuel line hose connector
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Socketless Push-On Hose Ends Application Chart (GIF)

  • Speedway Replacement Nitrile O-Rings for -8 AN Fittings, Pack/10
    Speedway Replacement Nitrile O-Rings for -8 AN Fittings, Pack/10
    x
                

    Speedway replacment "Nitrile 1" AN fitting O-rings are designed for standard fuel or oil applications.

    Bag of 10 O-rings.

    Fitting Thread Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Black Anodized, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Black Anodized, -6 AN
    x
                Please view the product's page for more information
            
  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Red/Blue, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Red/Blue, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -6 AN
    • 90 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • IFM to IFF Adapters
    $7.99
    Product Rating: 5.00 Stars
    IFM to IFF Adapters
    x
                

    Brass adapters. Select from:

    • 3/8"-24 IFM to 7/16" - 24 IFF
    • 7/16"-24 IFM to 3/8" - 24 IFF
    • 1/2"-20 IFM to 3/8" - 24 IFF
    • 9/16"-18 IFM to 3/8" - 24 IFF
  • Straight High-Flow O-Ring -6 AN Hose to -6 AN Port Fitting
    Straight High-Flow O-Ring -6 AN Hose to -6 AN Port Fitting
    x
                

    Straight high-flow O-ring port fitting for 37° AN flare. Blue anodized finish.

    High-Flow Port Fitting Application Chart (GIF)

    Fitting Thread Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, Straight, Red/Blue, -8 AN
    Speedway Full Flow Swivel Hose End Fitting, Straight, Red/Blue, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then blue and red anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a straight design and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -8 AN female to pus-on style adapter
    • Straight
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Works great with custom fuel lines
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Black 45 Degree Socketless Push-On Hose End, -6 AN
    Black 45 Degree Socketless Push-On Hose End, -6 AN
    x
                

    Black socketless push-on hose end fittings will give your engine compartment the look you are after. 45 degree fittings in multiple sizes.  For use with 37 degree flared ends.

  • 90 Degree Flare Adaptor, AN6 to 1/4 Inch NPT
    90 Degree Flare Adaptor, AN6 to 1/4 Inch NPT
    x
                

    Pipe to 90° flare adaptor. 37° AN. 

    Fitting Thread Application Chart (GIF)

  • AN6 Fitting Caps, 4/pk
    $4.99
    AN6 Fitting Caps, 4/pk
    x
                These AN fitting caps have always been hard-to-find items. Caps are used when sealing spare race engines against dirt and water during transportation and storage. 

    Each cap is reusable. Use on oil, fuel, or coolant lines. Four caps per package.

  • Blue Straight AN8 Flare Adapter to 1/2 Inch Aluminum Pipe Fitting
    Blue Straight AN8 Flare Adapter to 1/2 Inch Aluminum Pipe Fitting
    x
                

    These straight flare adaptors connect 1/2" pipe to straight -8 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -8 AN to 1/2" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Black 90 Degree Socketless Push-On Hose End, -8 AN
    Black 90 Degree Socketless Push-On Hose End, -8 AN
    x
                

    Black socketless push-on hose end fittings will give your engine compartment the look you are after. 90 degree fittings in multiple sizes.  For use with 37 degree flared ends.

  • 45 Degree Socketless Push-On Hose End, -6 AN
    45 Degree Socketless Push-On Hose End, -6 AN
    x
                

    45° socketless push-on hose ends for 37° fittings.

    Socketless Push-On Hose End Application Chart (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 8