Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 36

Products

Fittings

Shop Fittings and Hoses At Speedway Motors

Speedway Motors has hundreds of fuel line, water and oil line fittings and hose in stock and ready to ship! Plumb your race car, street rod, classic truck, or muscle car with fittings from top brands like Aeroquip, AFCO and Fragola. We stock everything from anodized AN fittings and power steering fittings to high-pressure stainless steel braided line, as well as all the tools needed to assemble and install them.

Featured Products
  • 1461X6 Air Brake Tubing Nut, 3/8 Inch Tubing Nut
    New
    1461X6 Air Brake Tubing Nut, 3/8 Inch Tubing Nut
    (Part #6175003)
    x
                

    When searching for parts for air brake tubing, this 1461X6 Air Brake Tubing Nut should be looked at. This 3/8" air brake tubing nut features a solid brass construction.

    • Brass construction
    • 3/8 Inch tube nut
    • Sold each
  • Snap-In Grease Needle
    $7.99
    Product Rating: 1.00 Stars
    Snap-In Grease Needle
    (Part #9101187)
    x
                

    Inject grease into low profile grease zerks or hard to reach places with this adapter. Nipple snaps into your existing grease gun end.

     

  • Aluminum -8 AN Female to -6 AN Male Reducer Fitting
    Aluminum -8 AN Female to -6 AN Male Reducer Fitting
    (Part #472995008)
    x
                

    Aluminum female to male adapter for 37° AN pipe fittings. Blue anodized finish.

    • -8AN female to -6AN male fuel line hose connector

    Fitting Thread Application Chart (GIF)

  • Fragola 2201131-BL Straight Hose End Adapter Fitting, -16 AN to -12 AN
    New
    Fragola 2201131-BL Straight Hose End Adapter Fitting, -16 AN to -12 AN
    (Part #6172201131)
    x
                

    This black Fragola hose fitting adapter allows you to connect a -16 AN hose to a -12 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.

    • Aluminum Construction
    • Black anodized finish  
    • Adapts -16 AN hose to -12 AN fitting
    • -12 AN fitting inlet
    • -16 AN hose outet
  • Speedway Replacement Nitrile O-Rings for -3 AN Fittings, Pack/10
    Speedway Replacement Nitrile O-Rings for -3 AN Fittings, Pack/10
    (Part #6173472)
    x
                

    Speedway replacment "Nitrile 1" AN fitting O-rings are designed for standard fuel or oil applications.

    Bag of 10 O-rings.

    Fitting Thread Application Chart (GIF)

  • Straight -4 AN Male to 1/8 Inch NPT Male Adapter Fitting
    Straight -4 AN Male to 1/8 Inch NPT Male Adapter Fitting
    (Part #324961604)
    x
                Straight AN to NPT adapters.
            
  • Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    (Part #91031820)
    x
                

    Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

  • 1488X6 Air Brake Brass Insert Sleeve, 3/8 Inch Outside Tube Diameter
    New
    1488X6 Air Brake Brass Insert Sleeve, 3/8 Inch Outside Tube Diameter
    (Part #6175002)
    x
                

    1484X6Air Brake Brass Insert Sleeve is intended for use with female compression-type fittings in nylon air brake lines. The sleeve fits inside 3/8" O.D. nylon tubing and it forms an air tight seal. This fitting is made out of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This insert fitting is suitable for use in air brake lines, such as those in buses and trucks.

    • Brass construction
    • 0.38" nylon tube outside diameter application
    • Sold each

Filter

"Fittings and Hose, Fittings" Page 1 of 36

Page 1 of 36

  • 1468X6X6 Air Brake Tubing Male Connector, 3/8 Imch NPT to 3/8 Inch Tubing
    New
    1468X6X6 Air Brake Tubing Male Connector, 3/8 Imch NPT to 3/8 Inch Tubing
    (Part #6175007)
    x
                

    When searching for a male connector for your air brake tubing, look no further. 1468X6X6 is constructed out of copper, is straight angle, and features two 3/8 inch fitting ends.

    • Copper construction
    • Straight angle
    • 3/8" NPT to 3/8" tubing
  • Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    (Part #91031820)
    x
                

    Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

  • Aluminum Flare Union Adapter Fitting, Black, -10 AN
    Aluminum Flare Union Adapter Fitting, Black, -10 AN
    (Part #61760371)
    x
                

    Aluminum 37° flare AN union fitting. Black anodized finish will give your engine compartment the look you are after.

  • Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    (Part #6174255)
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • AN Fitting Plug, -8 AN
    $4.99
    AN Fitting Plug, -8 AN
    (Part #54523804)
    x
                These AN fitting plugs have always been hard-to-find items. Plugs are used when sealing spare race engines against dirt and water during transportation and storage. Each plug is reusable. Use on oil, fuel, or coolant lines. Four plugs per package.
            
  • Black 45 Degree Socketless Push-On Hose End, -8 AN
    Black 45 Degree Socketless Push-On Hose End, -8 AN
    (Part #62020101)
    x
                

    Black socketless push-on hose end fittings will give your engine compartment the look you are after. 45 degree fittings in multiple sizes.  For use with 37 degree flared ends.

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue -12 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue -12 AN
    (Part #6201012)
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -12 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • AN16 Fitting Caps, 4/pk
    $5.99
    AN16 Fitting Caps, 4/pk
    (Part #54523811)
    x
                These AN fitting caps have always been hard-to-find items. Caps are used when sealing spare race engines against dirt and water during transportation and storage. 

    Each cap is reusable. Use on oil, fuel, or coolant lines. Four caps per package.

  • Speedway 90 -12 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    Speedway 90 -12 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    (Part #61760900)
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain. Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters. Lighter and more affordable than stainless steel, these electoless nickel plated aluminum pieces combine great corrosion resistance with a neutral color and classy appearance.

    Aluminum pipe thread to 37° AN adapter fitting with a 90° bend.

    Fitting Thread Application Chart (GIF)

  • Black Straight -12 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    Black Straight -12 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    (Part #61760521)
    x
                

    These straight flare adaptors connect 1/2" pipe to straight -12 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Black finish will give your engine compartment the look you are after.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -12 AN to 1/2" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Black anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Russell 670350 Fuel Pressure T-Off Fitting -8 AN Male - Female 1/8 NPT
    Russell 670350 Fuel Pressure T-Off Fitting -8 AN Male - Female 1/8 NPT
    (Part #6177035)
    x
                

    Fuel pressure take off fittings with 1/8" NPT side port.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fittings are designed to match up with all AN performance hose and hose ends
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Lets you plumb your wing slider cylinder line into the power steering
    • Cleans up cockpit
    • Lightweight, strong construction
    • Used on sprint cars to plumb wing slider cylinder line into power steering
    • Anodized aluminum
    • AN 8 male on one end; AN 8 female on other
    • 1/8” NPT port for plumbing wing slider cylinder line

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Speedway Full Flow Swivel Hose End Fitting, Straight, Anodized, -8 AN
    Speedway Full Flow Swivel Hose End Fitting, Straight, Anodized, -8 AN
    (Part #62010031)
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a straight design and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -8 AN female to push-on adapter
    • Straight style fuel line hose connector/coupler
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree
    Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree
    (Part #1061440)
    x
                

    45° push-on style steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils. 

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

  • Goodridge AN921-08D 90 Deg High-Flow O-Ring -8 AN Hose to Port Fitting
    Goodridge AN921-08D 90 Deg High-Flow O-Ring -8 AN Hose to Port Fitting
    (Part #6177025)
    x
                

    Goodridge high-flow 90° bend O-ring port adapter fitting for 37° AN flare. Blue anodized finish.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCE1524 Nickel 45 Deg Push-On Hose Socketless Fitting, -10 AN
    Aeroquip FCE1524 Nickel 45 Deg Push-On Hose Socketless Fitting, -10 AN
    (Part #6171524)
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    Socketless Fitting Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Black, -10 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Black, -10 AN
    (Part #62010181)
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -10 AN
    • 90 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 36