Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 6

Products

Air Cleaner Assemblies

Shop Air Cleaners At Speedway Motors

Top off your powerplant with a chrome or finned air cleaner that provides both power and style. Whether you are looking to increase horsepower or just keep your car running cleaner and longer, Speedway Motors has the largest selection of high performance air cleaners and filters around. From K&N to R2C Performance filters, Speedway Motors has the quality air filters you need at the best price anywhere!

Featured Products
  • Louvered Style Air Cleaners
    $9.99
    Product Rating: 4.50 Stars
    Louvered Style Air Cleaners
    (Part #91011005)
    x
                

    Just the ticket for that tri-power setup! Chrome plated steel housing with 4" x 2" replaceable paper element. Fits Holley 94, Stromberg 97, Speedway 9 Super 7, Demon 98 and Rochester 2 barrels (all with 2-5/8" neck). 

    Retained with a #36 hose clamp.

  • Technostalgia 8500 Retro Cadillac/Oldsmobile Air Cleaner
    Technostalgia 8500 Retro Cadillac/Oldsmobile Air Cleaner
    (Part #92511925)
    x
                

    This all steel air cleaner is based off the 1951-1956 Olds & Caddy air cleaner. It uses an over-the-counter 14" x 4" replacement element. It's even notched out in the back to clear a GM HEI distributor. Fits 5-1/8" carb neck (most Holley, Quadrajet, Demon and Edelbrock carbs).

    • 4-5/8" carb to top of air cleaner assembly
    • 5-3/32" carb to top of air cleaner nut
    • 18-1/4" wide (not a scaled down version)
    • 17-19/32" front to back length
    • Notched at rear for HEI distributor clearance

    Includes all steel housing, steel top, paper filter element, carburetor stud, and unique rocket shaped wing nut.

  • 14 Inch Full Finned Air Cleaner Assembly
    14 Inch Full Finned Air Cleaner Assembly
    (Part #9116802)
    x
                

    Add some style to your street rod with this 14" Full Finned air cleaner assembly. These kits feature a base with a chrome steel finish that are designed for use with 5-1/8" neck carburetors, a polished aluminum top with a 14" diameter, and a 14" x 3" replacement paper filter element.

    Kit includes:

  • Tri-Bar Wing Nut Style Air Cleaners
    Tri-Bar Wing Nut Style Air Cleaners
    (Part #91011018)
    x
                

    Just the ticket for that tri-power setup! These chrome plated steel air cleaners have a 4" x 2" replaceable paper element and will fit 2-5/8" and 2-5/16" carbs.

    Comes with a metal screw to secure it to the carb neck from the top side. Includes tri-bar style retaining nut.

  • Tru-Helmet Air Cleaners
    $29.99
    Product Rating: 4.00 Stars
    Tru-Helmet Air Cleaners
    (Part #91611005)
    x
                

    Tru-Helmet air cleaner which fits all carburetors with a 2-5/8" neck. Chrome plated steel. Uses 3-7/8" filters.Works with Holley 94, Stromber 97, Speedway 9 Super 7, and Rochester 2 barrels with 2-5/8" neck.

    Includes paper air cleaner element.

     

  • Rochester 2G Air Cleaner Adapter
    Rochester 2G Air Cleaner Adapter
    (Part #91011360)
    x
                
    • Allows you to use common 5-1/8" 4 bbl. air cleaner on your Rochester 2G 2 bbl. carburetor 
    • Billet aluminum
    • Must be modified or used with a spacer on 2GC models
  • Helmet Style Air Cleaners
    $18.99
    Helmet Style Air Cleaners
    (Part #91011025)
    x
                

    Just the ticket for that tri-power setup! Chrome plated steel housing with 4" x 2" replaceable paper element. Fits Holley 94, Stromberg 97, Speedway 9 Super 7, Demon 98, and Rochester carbs with 2-5/8" neck size.

  • OTB Gear 4670 Mohawk Cast, Spun Air Cleaner
    New
    OTB Gear 4670 Mohawk Cast, Spun Air Cleaner
    (Part #9104670)
    x
                

    This Mohawk cast spun air cleaner from OTB Gear is constructed of a heavy aluminum and has a unique look. The spun shell can be painted or clear coated.

    • Polished casting countersunk into heavy wall satin aluminum spinning
    • Outer shell can be painted or clear coated
    • Washable permanent filter
    • Fits standard 5" four bbl. Carb
    • Diameter 12" - height 4-1/2"
    • Made in the USA

Filter

"Filters, Air Cleaner Assemblies" Page 1 of 6

Page 1 of 6

  • OTB Gear 4650 Orbit Cast, Spun Air Cleaner
    New
    OTB Gear 4650 Orbit Cast, Spun Air Cleaner
    (Part #9104660)
    x
                

    This Orbit cast heavy aluminum spun air cleaner from OTB Gear has a truly unique look. The spun shell can be painted or clear coated.

    • Polished casting countersunk into heavy wall satin aluminum spinning
    • Outer shell can be painted or clear coated
    • Washable permanent filter
    • Fits standard 5" four bbl. Carb
    • Diameter 12" - height 4-1/2" 
    • Made in the USA

     

  • OTB Gear 4461 Orbit Style Air Cleaner, Offset Base, Polished
    OTB Gear 4461 Orbit Style Air Cleaner, Offset Base, Polished
    (Part #2474461)
    x
                
    The inspiration for "Orbit" came from the the '30's - '40's Ford horn button design. But repeating rings were a very popular design theme by a number of auto builders. Got twin 4's with real tight spacing? The selection of air cleaners for you has been pretty slim, right? Many manifolds out there position the carbs with only 6-7/16" center to center. This variation features a 1/4" offset base to deal with this problem - a simple solution to an old issue. If spacing this tight isn't your problem, we have a straight base also. If running twin carbs, check your center to center spacing. We use our Platinum Series air filter with A-356 aircraft grade castings for a show quality product. The filter media is a medium gray, washable oiled cloth. Prefer to have an unpolished finish? You can have that too. Hardware furnished includes a polished stainless socket drive top screw. Diameter 6-3/4" - Height 4-1/2". Fits carbs with the typical 5" base.
    • Washable Filter Media
    • Polished
    • 1/4" Offset base plate
    • Fits carbs with standard 5-1/8" neck
    • Diameter 6-3/4"
    • Height 4-1/2"
    • Hardware furnished includes a polished stainless socket drive top screw
    • Priced and sold as single assembly - purchase 2 for a twin carb application
  • Garage Sale - K&N Air Cleaner and Base 14 X 5
    Garage Sale
    Garage Sale - K&N Air Cleaner and Base 14 X 5
    (Part #UP40582)
    x
                Please view the product's page for more information
            
  • Flamed Billet-Style Oval Air Cleaners
    Flamed Billet-Style Oval Air Cleaners
    (Part #91011037)
    x
                

    Theses highly polished aluminum air cleaners have the look of billet without the expense. Available with flame top.

    Measures 3" high, 8-3/8" wide. Fits 5-1/8" single quad air horns.

  • Nostalgia Spun Aluminum Air Cleaner
    Nostalgia Spun Aluminum Air Cleaner
    (Part #91011093)
    x
                This spun aluminum air cleaner fits common 5 1/8" neck 4BBL carburetors and is 8" diameter and 3 7/8" tall. Wing nut sold separately. 
            
  • OTB Gear 4470 Mohawk Style Air Cleaner, Straight Base, Polished
    OTB Gear 4470 Mohawk Style Air Cleaner, Straight Base, Polished
    (Part #2474470)
    x
                Mohawk steps out with 5 fins and an elegant stepped shoulder design. This variation uses a straight base. If running twin carbs, measure your center to center dimensions. We use our Platinum Series air filter with A-356 aircraft grade castings for a show quality product. The filter media is a medium gray, washable oiled cloth. Hardware furnished includes a polished stainless socket drive top screw. Diameter 6-3/4" - Height 4-1/8". Fits carbs with the typical 5" base.
    • Washable Filter Media
    • Polished
    • Straight base plate
    • Fits carbs with the typical 5-1/8" base
    • Hardware furnished includes a polished stainless socket drive top screw
    • Diameter 6-3/4"
    • Height 4-1/8"
    • Priced and sold as single assembly - purchase 2 for a twin carb application
  • 14 Inch Flat Air Cleaner Housing Base
    $11.99
    $19.99
    14 Inch Flat Air Cleaner Housing Base
    (Part #9112148)
    x
                These replacement air cleaner bases feature a flat 14" diameter with a chrome steel finish and are designed for use with 5-1/8" neck carburetors.
    • 14" diameter
    • Chrome finish
    • Steel construction
    • Flat base
    • For carbs with 5-1/8" neck
  • OTB Gear 4420 Finned Teardrop Air Cleaner, Polished
    OTB Gear 4420 Finned Teardrop Air Cleaner, Polished
    (Part #2474420)
    x
                Now this air cleaner makes a statement! This product would have been very much in style in the 50's. Reminiscent of the old twin 2 barrel air cleaners, but nicer... Cast in aircraft grade aluminum, and polished to a high shine. This little item will really be a show stopper on your engine. Provided with a quality, washable, oiled air filter, base and mounting hardware. 
    • For carbs with 5-1/8" neck
    • Includes a quality, washable, oiled air filter, base and mounting hardware
    • Dimensions (With filter): 11-1/2" X 9" X 4-3/8"
    • Mounting screw to front edge: 4.5"
    • Mounting screw to back edge: 7.5"
  • Garage Sale - K&N Filters 61-4000 Flow Control Air Cleaner-Holley 4BBL no Choke Horn
    Garage Sale
    Garage Sale - K&N Filters 61-4000 Flow Control Air Cleaner-Holley 4BBL no Choke Horn
    (Part #465614000.GS)
    x
                Please view the product's page for more information
            
  • Edelbrock 4117 Classic Round Air Cleaner
    $189.99
    $190.99
    Edelbrock 4117 Classic Round Air Cleaner
    (Part #3254117)
    x
                

    These polished cast aluminum air cleaners will make your engine stand out from the others. Round assembly has a 3" tall, pre-oiled cotton gauze element for excellent flow and filtration. For carbs with a 5-1/8" neck.

  • Garage Sale - K&N Filters 60-1300 Air Cleaner Assembly, 15 x 5 Inch
    Garage Sale
    Garage Sale - K&N Filters 60-1300 Air Cleaner Assembly, 15 x 5 Inch
    (Part #UP45207)
    x
                Please view the product's page for more information
            
  • Edelbrock 41159 Cast Single Air Cleaner
    $139.99
    $172.95
    Edelbrock 41159 Cast Single Air Cleaner
    (Part #32541159)
    x
                Edelbrock’s Classic Series engine dress-up accessories deliver a definitive appeal that brings back a look from the 1950’s.

    Edelbrock first made these aluminum valve covers in the late '50s and they continue to be a classic. Made of heavy-gauge sand-cast aluminum, our classic finned valve covers are now available in a natural as-cast finish, for enthusiasts looking for a subtle classic look for their engine.

    All of the air cleaners include a pre-oiled and washable cotton gauze element for excellent filtration. They are compatible with all popular 5-1/8" diameter carburetors and throttle bodies.

    Classic Series Accessory Details:
    • Now available in a natural as-cast finish for an authentic look from the 1950’s
    • Made from heavy-gauge sand-cast aluminum in the USA
    • Air cleaners include a 3” washable and reusable filter element that fits 5-1/8” diameter carburetors and throttle bodies
  • Chrome Air Cleaner with Washable Filter, 14 x 3 Inch
    Chrome Air Cleaner with Washable Filter, 14 x 3 Inch
    (Part #91011039)
    x
                Why keep buying paper elements when this one could last a lifetime?  This air cleaner assembly features a washable element, a beautiful chrome  plated top and base designed for the common 5-1/8" carb neck.
            
  • Tri-Bar Wing Nut Style Air Cleaners
    Tri-Bar Wing Nut Style Air Cleaners
    (Part #91011018)
    x
                

    Just the ticket for that tri-power setup! These chrome plated steel air cleaners have a 4" x 2" replaceable paper element and will fit 2-5/8" and 2-5/16" carbs.

    Comes with a metal screw to secure it to the carb neck from the top side. Includes tri-bar style retaining nut.

  • 14 Inch Louvered Corvette/GTO Style Air Cleaner
    14 Inch Louvered Corvette/GTO Style Air Cleaner
    (Part #9104195)
    x
                

    This 14x3 inch Louvered Corvette/GTO Style air cleaner has a chrome steel top and base. It includes a 3" paper element and polished steel mounting stud.

    • Fits single quad carburetors with 5-1/8" neck
    • Drop base
    • Will NOT work with a coil in cap HEI distributor
  • 14 Inch Full Finned Air Cleaner Assembly
    14 Inch Full Finned Air Cleaner Assembly
    (Part #9116802)
    x
                

    Add some style to your street rod with this 14" Full Finned air cleaner assembly. These kits feature a base with a chrome steel finish that are designed for use with 5-1/8" neck carburetors, a polished aluminum top with a 14" diameter, and a 14" x 3" replacement paper filter element.

    Kit includes:

  • Garage Sale - Gasser Style Competition Air Scoop
    Garage Sale
    Garage Sale - Gasser Style Competition Air Scoop
    (Part #UP29833)
    x
                This Hilborn-style scoop is just the finishing touch for that blown or tunnel ram engine. This air cleaner scoop is designed to be used with two 4 barrel dual quad carbs with a 5-1/8" neck, but it can be used on single 4 barrel applications if the scoop will be above the distributor and is centered over the carb. 

    Approximate measurements are 20" long, 9-1/2" wide and 6" tall.

    Instructions (PDF)

    Note: Carb center spacing can be no wider than 9-1/4".

     

    This is garage sale priced because it is missing all of the hardware. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • MSD 2894 Reusable Air Cleaner Filter
    MSD 2894 Reusable Air Cleaner Filter
    (Part #5472894)
    x
                Reusable Air Cleaner Filter for MSD Air Cleaner.
    • Fits MSD Air Cleaner Kit
  • Garage Sale - Beehive Aluminum Air Cleaners
    Garage Sale
    Garage Sale - Beehive Aluminum Air Cleaners
    (Part #UP47374)
    x
                Please view the product's page for more information
            
  • Moroso 65910 Chrome Air Cleaner, 14 x 3 Inch
    Moroso 65910 Chrome Air Cleaner, 14 x 3 Inch
    (Part #54565910)
    x
                

    14" diameter with 3" high filter to fit 4 barrel carbs with 5-1/8" diameter necks. Offers maximum air flow with only 2-1/2" stack height above the carburetor lip. Dyno tests report that small blocks using Moroso air cleaners can produce 10 more horsepower than with other air cleaners.

    • Moroso's unique radiused air inlet design equalizes air pressure past the boosters for uniform air flow
    • Radiused air inlet is stamped into air cleaner base to reduce overall height
    • Back to back dyno testing proves a gain of over nearly 10 horsepower over running no air cleaner at all
    • Overall stacking height above the carburetor lip of only 2-1/2"
    • Fits all Holley, Carter, Rochester, and Edelbrock carburetors with 5-1/8" dia. necks
Goto Previous PagePrevious Page
1 2 3 4 5 6