Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 26

Products

Fasteners

Fasteners

Whether you're running at the track or cruising down the street, having the right hardware can make a huge difference. In the automotive world, not all nuts and bolts are made equal. Don't let something so small ruin your ride. From washers to rivets and jam nuts to snap rings Speedway Motors carries all of the top brands like Tru-Lite Titanium, ARP and Ti64, all at the best prices around.

Featured Products
  • Body Savers, .478 Inch Hole, 10/Bag
    Body Savers, .478 Inch Hole, 10/Bag
    (Part #91007107)
    x
                
    • Extend the life of your fiberglass body parts by eliminating ovaling
    • Mount using 1/8" rivets
    • 430 Stainless steel 
    • .478" diameter
    • Pack of 10
  • Quarter-Turn Stepped Fastener Springs, .425 Inch, 1-3/8, Set of 10
    New
    Quarter-Turn Stepped Fastener Springs, .425 Inch, 1-3/8, Set of 10
    (Part #91007110)
    x
                

    These quarter turn springs are to be used with standard or lightweight plates and mount easily with pop rivets. They are .425" tall and feature an eye-to-eye measurement of 1-3/8".

    • .425" tall
    • Eye-to-eye measurement is 1-3/8"
    • Pack of 10
  • Eagle Motorsports Tether and Cage Net Tab
    Eagle Motorsports Tether and Cage Net Tab
    (Part #940135)
    x
                

    This tab keeps tethers and cage nets in place. Quality made factory chassis component by Eagle Motorsports, but will work on any chassis brand. They are a weld-on steel tab for your sprint or midget.

    • Keeps tethers and cage nets in place
    • Works for both sprints and midgets
    • Weld-on
    • Steel construction
    • Eagle Motorsports factory chassis component, works on all brands

     

  • Tru-Lite Titanium Bolt, 3/8-16 Coarse Thread, 1 In Long, 9/16 In Hex
    Tru-Lite Titanium Bolt, 3/8-16 Coarse Thread, 1 In Long, 9/16 In Hex
    (Part #9406100)
    x
                

    These coarse thread Tru-Lite titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight. Made from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel.

    • Coarse thread Titanium
    • Greater tensile strength than Grade 8 bolts
    • 3 times the strength of aluminum
    • 42% lighter than steel
    • 3/8"-16 x 1"
    • 9/16" Hex Head
    • Application: bell housing to torque plate, engine to motor plate
  • Standard Windshield Wing Nut, Chrome
    Standard Windshield Wing Nut, Chrome
    (Part #91123131)
    x
                

    Fits Model T - 1936 Ford roadsters. Fits 3/8" UNF stud.

    Windshield Mount Guide (GIF)

  • Winters Performance 5010 Pro-Eliminator Rearend Thrustblock
    Winters Performance 5010 Pro-Eliminator Rearend Thrustblock
    (Part #8025010)
    x
                

    Pro-Eliminator and Winters Rearend Replacement Parts

    • Winters Thrustblock

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (PDF)

    Pro Eliminator Rear End Diagram (GIF) 

  • Winters Performance 5095 3/4 Ton Wide 5 Spindle Nut Lock Washer
    Winters Performance 5095 3/4 Ton Wide 5 Spindle Nut Lock Washer
    (Part #919L104)
    x
                All the parts you need to service your Wide 5 hubs! 
            
  • Pro-Eliminator Midget/Winters 3/8 Inch-16 Aluminum High Nut
    Pro-Eliminator Midget/Winters 3/8 Inch-16 Aluminum High Nut
    (Part #8027794AR)
    x
                

    Winters/Pro-Eliminator Replacement Parts

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (pdf)

    Pro Eliminator Rear End Part Guide (Link)

Filter

"Fasteners and Hardware, Fasteners" Page 1 of 26

Page 1 of 26

  • Dynatech® 785-10093 02/Pan E-Vac 18mm Sealing Washers (Pair)
    Dynatech® 785-10093 02/Pan E-Vac 18mm Sealing Washers (Pair)
    (Part #31178510093)
    x
                

    Dynatech® 02/Pan E-Vac 18mm sealing washers for the U-weld kit that features an 18mm threaded bung that accepts a standard O2 sensor found on EFI applications.

    • Sold as a pair of two washers. 
    • One pair required per collector.
  • CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    (Part #910322)
    x
                

    This wing nut is for-sure an attention getter. Perfect topper for the air cleaner on a big four barrel, on top of your tri-power pots or an accent piece wherever you need it.

  • Speed Fast Aluminum SAE/Fine Lock Nut Kit
    Speed Fast Aluminum SAE/Fine Lock Nut Kit
    (Part #94004006)
    x
                This Aluminum Nylock Nut Kit contains 50 pieces. A variation of the nyloc nut, this features a fiber and nylon locking insert for the tightest hold. Nylocs are  designed to increase locking force and prevent the nut from coming  loose. 

    Several sizes of nylocks are available in this kit for your application. Comes with (10) 10-32, (10) 5/16"-24, (10) 3/8"-24, (10) 1/4"-28,  (10) 1/2"-20.
  • Stainless Steel Nylock Nut Kit, Fine Thread
    Stainless Steel Nylock Nut Kit, Fine Thread
    (Part #94004176)
    x
                We now offer a full height self locking stainless steel nuts in fine thread in a plastic divider case with 25 (1/4") 20 (5/16") 20 (3/8") 15 (7/16") and 12 (1/2") nuts.
            
  • AFCO 10138 Steel Jam Nut, 3/8-24 RH
    $0.78
    $0.99
    AFCO 10138 Steel Jam Nut, 3/8-24 RH
    (Part #10610138)
    x
                

    Steel fine thread jam nuts for use with rod ends, heim joints, and clevis.

  • Steel 3/8 Inch AN6 Washers, 50 Pack
    Steel 3/8 Inch AN6 Washers, 50 Pack
    (Part #94004060)
    x
                Steel 3/8" AN Washers, 50 Pack
            
  • Pop Rivet 151 Piece Kit
    $15.99
    Pop Rivet 151 Piece Kit
    (Part #94004007)
    x
                151 piece kit comes with 1/8" and 3/16" pop rivets with steel head and steel mandrel, and aluminum head with steel mandrel. Or aluminum head with aluminum mandrel. 

    Also comes with an assortment of backing washers as well as the large headed 3/16" style. All packed into a convenient storage case.

  • AFCO 10141 Steel Jam Nut, 3/4-16 LH
    $1.35
    $1.99
    AFCO 10141 Steel Jam Nut, 3/4-16 LH
    (Part #10610141)
    x
                

    Steel fine thread jam nuts for use with rod ends, heim joints, and clevis.

  • Bert Transmission 28 Button Head Screw
    Bert Transmission 28 Button Head Screw
    (Part #73628)
    x
                Bert Racing Transmission Replacement Parts
            
  • AFCO 20202 Replacment Weight Jack Nut, 1-1/8 Inch Fine Thread
    AFCO 20202 Replacment Weight Jack Nut, 1-1/8 Inch Fine Thread
    (Part #10620202)
    x
                

    Replacement 1-1/8" SAE (fine thread) steel nut with grease zerk for AFCO Weight Jacks.

  • Quarter Turn Springs with Step, Pack/10
    Quarter Turn Springs with Step, Pack/10
    (Part #91007103)
    x
                

    Stepped quarter turn springs mount easily with pop rivets. The step is approximately 0.250". Overall height of spring is 0.400" to 0.425". Eye-to-eye measurement is 1-3/8".

    Measurement Guide (Link)

  • TI64 222 Titanium Micro Sprint Bullet Nose Stop Adjuster Bolt Kit
    TI64 222 Titanium Micro Sprint Bullet Nose Stop Adjuster Bolt Kit
    (Part #940222)
    x
                These bullet nose stop adjusters for Micro Sprint cars are constructed of titanium for long lasting durability.  They come in a set of 4 bolts with 5/16"-18 x 1-3/4" threads.
    • Bullet Nose Stop Adjuster
    • Set of 4
    • 5/16"-18 x 1-3/4"
  • Winters Performance 7802 Gear Cover 3/8-16 x 1-3/4 Inch Stud
    Winters Performance 7802 Gear Cover 3/8-16 x 1-3/4 Inch Stud
    (Part #8027802)
    x
                

    Winters Replacement Parts

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (pdf)

  • 1/2 Inch-20 Fine Thread Nylock Half Nuts, 6 Pack
    1/2 Inch-20 Fine Thread Nylock Half Nuts, 6 Pack
    (Part #91005906)
    x
                

    1/2 Inch-20 Fine Thread Nylock Half Nuts.  Works with front drive pins (part numbers 91003996 and 91003900).

    • 1/2 Inch-20 Fine Thread
    • Package of six.
  • Quik-Latch Products QL-25-SP Mini Quick-Latch, Polished Aluminum
    Quik-Latch Products QL-25-SP Mini Quick-Latch, Polished Aluminum
    (Part #91007156)
    x
                

    These small latches can be used for multi-purpose quick release latching. Center release button stays in the down position until re-latched. Each latch body has a 1-1/4" O.D. and is supplied with one mounting stud, two threaded nuts, and two washers. Mounting cup (sold seperately) is used to mount the stud underneath the panel. Mounting cup can be easily riveted or bolted to the back side of any panel.

    • Diameter of Latch Body:  1.23"
    • Length of Latch Body:  0.57"
    • 1/4"-20 Thread
    • Length of Mounting Stud:  2.13"

    Works great for:

    • T-Bucket bed covers
    • Hood pins
    • Deck lids
    • Air cleaner stud
    • Removeable body panels
  • Plastic Large Head Quarter Turn Fasteners, .500 Inch Grip, Pack/10
    Plastic Large Head Quarter Turn Fasteners, .500 Inch Grip, Pack/10
    (Part #91007137)
    x
                
    1/4 turn panel fasteners that have an extra large 1-1/8" diameter head with a 1/2" grip. These quarter turn fasteners are available in black, blue, grey, purple, red, white and yellow.
    • Extra large 1-1/8" diameter head
    • .500" grip
    • Available in Black, Blue, Grey, Purple, Red, White, or Yellow
    • Pack of 10

    Measurement Guide (Link)

  • DMI RRC-1620 XR-1 Bulldog Rearend Stub Shaft Snap Ring
    DMI RRC-1620 XR-1 Bulldog Rearend Stub Shaft Snap Ring
    (Part #9409046)
    x
                

    Manufactured with the highest quality castings, bearings, and gears these rearend parts have proven reliability.

    Stub Shaft Snap Ring

  • Tru-Lite Titanium Torque Tube Stud, 3/8 Inch-16-24 x 1.25
    Tru-Lite Titanium Torque Tube Stud, 3/8 Inch-16-24 x 1.25
    (Part #9406053)
    x
                

    These titanium studs are fine on one end and coarse on the other.

    • 3/8" x 1.25.
    • Titanium standard.

     

  • Tru-Lite Fine Thread Titanium Bolt, 3/8-24 x 1.500 Inch
    Tru-Lite Fine Thread Titanium Bolt, 3/8-24 x 1.500 Inch
    (Part #9406303)
    x
                

    3/8"-24 with 9/16" Hex Head

    These fine thread titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight.

  • 5/8 Inch or 16mm to AN6 Banjo Fitting for Power Steering Pump
    5/8 Inch or 16mm to AN6 Banjo Fitting for Power Steering Pump
    (Part #6174830)
    x
                

    Zinc-plated steel banjo bolt assembly for the pressure connection (outlet) to the pump.

    Fitting 617-4830 fits our:

    • P/S pump # 91032922-GM
    • P/S pump # 91032908-BLK  
    • P/S pump # 91032908-CHR

    WARNING:  Fitting is designed to accept an AN-6 stainless steel braided wire high-pressure hose.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 26