Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Exhaust At Speedway Motors

Speedway has the performance exhaust parts to give your car a voice of its own. Whether you're looking for a quiet rumble or a deep roar, we've got the headers, mufflers and complete cat-back systems to bring your car to life. Take that gag off your car and get ready for more horsepower and a sound that could sooth any car nuts soul.

"Exhaust, Exhaust Pipes" Page 1 of 8

  • Exhaust Reducer, 3 Inch I.D. to 2-1/2 Inch O.D.
    Exhaust Reducer, 3 Inch I.D. to 2-1/2 Inch O.D.
    x
                

    Mild steel exhaust reducer to repair or build your own exhaust system. The swedge for the reduction occurs midway at 2-1/4”.

  • Slip-Over Extension Pipes w/ Mufflers, Chrome, 3-1/2 x 26 Inch
    Slip-Over Extension Pipes w/ Mufflers, Chrome, 3-1/2 x 26 Inch
    x
                

    These extensions are designed for use with "T" roadster headers. Professionally cut and mandrel bent extensions slip over 3-1/2" diameter collector pipes. Features a 12-1/2" perforated glasspack muffler installed inside the extension. Muffler has a 1.900" I.D.

  • Combo Exhaust Bend/Header Tubing, 2 Inch
    Combo Exhaust Bend/Header Tubing, 2 Inch
    x
                Mild steel combo exhaust bends for building or  repairing headers. 16-gauge tubing with 2" O.D.
            
  • Mild Steel Exhaust Bend Kit, 2-1/2 Inch
    Mild Steel Exhaust Bend Kit, 2-1/2 Inch
    x
                

    Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately. Natural, uncoated finish. Not aluminized.

    • Four 48" Straight Pipes
    • Four 90 Degree Pipes
    • Four 45 Degree Pipes 
    • Four 180 Degree U-Bends
  • Chrome Bellflower Tips
    From: $37.99
    Product Rating: 4.75 Stars
    Chrome Bellflower Tips
    x
                These babies will make your ride so cool!  Our Bellflower tips are 2-1/2" chrome pipes which will fit almost any application. 1-7/8" O.D. inlet, and available in 24" or 30" tip lengths.
            
  • Mild Steel Exhaust U-Bend, 2 Inch
    Mild Steel Exhaust U-Bend, 2 Inch
    x
                

    Natural finish (uncoated) 16-gauge mandrel bent mild steel U-bends for building your own weld up headers or replacing bent or damaged header tubing.

    • 2" outside diameter header pipe
    • 3" bend radius
  • Slip-Over Kickout Extension Pipes, AHC, 3-1/2 x 20 Inch
    Slip-Over Kickout Extension Pipes, AHC, 3-1/2 x 20 Inch
    x
                

    These extensions are designed for use with "T" roadster headers. Professionally cut and mandrel bent extensions slip over 3-1/2" diameter collector pipes. Features ceramic coating for superior protection.

  • Exhaust Dump Tubes
    From: $12.99
    Product Rating: 5.00 Stars
    Exhaust Dump Tubes
    x
                Build your own open exhaust with our 16" long tube with end cap and bolts. 2" O.D. inlet. Choose black, chrome or stainless steel finish.
            
  • Kickout Pipes, 3-1/2 x 7 Inch
    Kickout Pipes, 3-1/2 x 7 Inch
    x
                Raw steel kickouts are professionally cut and mandrel bent.
            
  • Lake Style Header Turn-Outs, Plain
    Lake Style Header Turn-Outs, Plain
    x
                

    Exhaust turn-outs for Speedway Lake Style Headers. Available in plain steel or long-lasting AHC ceramic coated.

  • Combo Exhaust Bend/Header Tubing, 2-1/2 Inch
    Combo Exhaust Bend/Header Tubing, 2-1/2 Inch
    x
                These mild steel combo exhaust bends are perfect for building or repairing headers.  They feature smooth mandrel bends with a bend radius of 7" and an outside diameter of 2-1/2". 
    • Mild steel
    • For building or repairing headers
    • 16-gauge (0.06" thick)
    • 2-1/2" O.D

  • Combo Exhaust Bend/Header Tubing, 1-3/4 Inch
    Combo Exhaust Bend/Header Tubing, 1-3/4 Inch
    x
                
    Mild steel combo exhaust bends for building or repairing headers. 16-gauge tubing with 1-3/4" O.D.
  • Combo Exhaust Bend/Header Tubing, 1-1/2 Inch
    Combo Exhaust Bend/Header Tubing, 1-1/2 Inch
    x
                
    Mild steel combo exhaust bends for building or repairing headers. 16-gauge tubing with 1-1/2" O.D.
  • Mild Steel Exhaust U-Bend, 2-1/2 Inch
    Mild Steel Exhaust U-Bend, 2-1/2 Inch
    x
                

    Natural finish (uncoated) 18-gauge mandrel bent mild steel U-bends for building your own weld up headers or replacing bent or damaged header tubing.

    • 2-1/2" outside diameter header pipe
    • 6" bend radius
  • Stainless Steel Oval Exhaust Tip, 2-1/2 Inch Inlet
    Stainless Steel Oval Exhaust Tip, 2-1/2 Inch Inlet
    x
                

    These weld-on, polished stainless steel oval exhaust tips are universal to fit 2-1/2" diameter pipes.  They have a 3" x 5-3/4" outlet and are 11-3/8" long.

    • Weld-on
    • Universal
    • Highly Polished Stainless Steel
    • Oval Design
    • Fit 2-1/2" Diameter Pipes
    • 3" x 5-3/4" outlet
    • 11-3/8" long

     

  • Tight-Tubes Extension Kit, Mild Steel
    Tight-Tubes Extension Kit, Mild Steel
    x
                Using this kit makes the hook-up of your exhaust system a snap! The 2-1/2" diameter, 16-gauge, mandrel-bent tubes curve back at a 90° angle and are offset outward to clear the bellhousing and starter. They drop 10-1/2" from the header flange and they extend backward 17-1/2" after the 90 degree bend. 

    Just trim the length, weld on the 3/8" thick collector flange (included, with gaskets) and you're all set! Works great with any tight-fit headers. Header not included.

  • Dougs Headers H1130 Exhaust Cut-Out Hook-Up Kit, 2-1/2 Inch
    Dougs Headers H1130 Exhaust Cut-Out Hook-Up Kit, 2-1/2 Inch
    x
                

    Avoid an expensive trip to the muffler shop by using this cut-out hookup kit when installing our electric exhaust cut outs. Some fabrication required but no welding nescessary. Kits are sold as a pair and come with mounting hardware.

    These hook-up kits are made for our electric cut-outs but can be used for other applications.

    • Overall length of pipe = 9.00"
    • Length of stepped pipe splicing into exhaust = 2.00" each side
    • Center pipe length (between stepped pipes) = 5.00"
    • Cut out length (center of weld to edge of flange) = 5.50"
    • 40.4 degree angle
  • Combo Exhaust Bend/Header Tubing, 1-5/8 Inch
    Combo Exhaust Bend/Header Tubing, 1-5/8 Inch
    x
                Mild steel combo exhaust bends for building or repairing headers. 16-gauge tubing with 1-5/8" O.D.
            
  • Mild Steel Exhaust Bend Kit, 2-1/4 Inch
    Mild Steel Exhaust Bend Kit, 2-1/4 Inch
    x
                

    Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately.Tubing has a natural, uncoated finish. (Not Aluminized)

    • Four 48" Straight Pipes
    • Four 90 Degree Pipes
    • Four 45 Degree Pipes 
    • Four 180 Degree U-Bends
  • Combo Exhaust Bend/Header Tubing, 1-7/8 Inch
    Combo Exhaust Bend/Header Tubing, 1-7/8 Inch
    x
                Mild steel combo exhaust bends for building or  repairing headers. 16-gauge tubing with 1-7/8" O.D.
            
  • Plain Steel Exhaust Megaphone, 1-5/8 x 3-1/2 x 30 Inch
    Plain Steel Exhaust Megaphone, 1-5/8 x 3-1/2 x 30 Inch
    x
                A great looking, great sounding addition to any street rod. Made from 18 gauge mild steel.
            
  • Kickout Pipes, 3 x 7 Inch
    $22.99
    Product Rating: 5.00 Stars
    Kickout Pipes, 3 x 7 Inch
    x
                Raw steel kickouts are professionally cut and mandrel bent.
            
  • Mild Steel Exhaust U-Bend, 1-1/2 Inch
    Mild Steel Exhaust U-Bend, 1-1/2 Inch
    x
                

    Natural finish (uncoated) 18-gauge mandrel bent mild steel U-bends for building your own weld up headers or replacing bent or damaged header tubing.

    • 1-1/2" outside diameter header pipe
    • 2.23" bend radius
  • Mild Steel Exhaust U-Bend, 1-3/4 Inch
    Mild Steel Exhaust U-Bend, 1-3/4 Inch
    x
                

    Natural finish (uncoated) 18-gauge mandrel bent mild steel U-bends for building your own weld up headers or replacing bent or damaged header tubing.

    • 1-3/4" outside diameter header pipe
    • 4" bend radius
  • Exhaust Elbow, 90 Degree, 3 Inch O.D.
    Exhaust Elbow, 90 Degree, 3 Inch O.D.
    x
                

    3" O.D. mild steel, mandrel bent tubular exhaust elbows to complete your custom exhaust system. Has a 4" centerline radius.

  • Dual Exhaust Flame Thrower Kit
    Dual Exhaust Flame Thrower Kit
    x
                

    Shoot flames out your tailpipe up to 8 feet with just a push of a button! The flames are created using unburnt fuel produced by the control module by momentarily interrupting your vehicle’s ignition system. This introduces unburnt fuel into the exhaust, which is then ignited by the spark unit, producing a 1-8 foot flame from your exhaust.

    For offroad use on vehicles without a catalytic converter. Works on 6V or 12V negative or positive ground systems. Includes box, spark plugs, switch, weld bungs, hardware, and detailed instructions with pictures.

    Welding is required. Ignition coil not included.

    Instructions (PDF) 

  • Mild Steel Exhaust U-Bend, 1-5/8 Inch
    Mild Steel Exhaust U-Bend, 1-5/8 Inch
    x
                

    Natural finish (uncoated) 18-gauge mandrel bent mild steel U-bends for building your own weld up headers or replacing bent or damaged header tubing.

    • 1-5/8" outside diameter header pipe
    • 3" bend radius
  • Exhaust Elbow, 90 Degree, 3-1/2 Inch O.D.
    Exhaust Elbow, 90 Degree, 3-1/2 Inch O.D.
    x
                

    3-1/2" O.D. mild steel, mandrel bent tubular exhaust elbows to complete your custom exhaust system. Has a 4" centerline radius.

    • 3.5" O.D.
    • 90 degree angle
    • 4" center line
    • A length: 5 1/4"
    • B length: 2 3/4"
  • Mild Steel Exhaust U-Bend, 1-7/8 Inch
    Mild Steel Exhaust U-Bend, 1-7/8 Inch
    x
                

    Natural finish (uncoated) 18-gauge mandrel bent mild steel U-bends for building your own weld up headers or replacing bent or damaged header tubing.

    • 1-7/8" outside diameter header pipe
    • 3" bend radius
  • Exhaust Reducer, 3-1/2 Inch I.D. to 3 Inch O.D.
    Exhaust Reducer, 3-1/2 Inch I.D. to 3 Inch O.D.
    x
                

    Mild steel exhaust reducer to repair or build your own.

    • 4-1/2” overall length 
    • Swedge for the reduction occurs midway at 2-1/4”
     

     

  • Stainless Steel Exhaust Bend Kit, 2-1/2 Inch
    Stainless Steel Exhaust Bend Kit, 2-1/2 Inch
    x
                

    Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately. Natural, uncoated finish.

    • Four 48" Straight Pipes
    • Four 90° Pipes
    • Four 45° Pipes 
    • Four 180° U-Bends
  • Polished Stainless Exhaust Tubing
    From: $17.99
    Product Rating: 4.78 Stars
    Polished Stainless Exhaust Tubing
    x
                

    Our fully polished 304 grade seamed stainless steel tubing has a wall thickness of .07" (15 gauge) which makes it perfect for building weld up headers or exhaust systems. Pair this header tubing with one of our stainless header flanges for the perfect set of custom headers. Sizes available are listed by the outside diameter (O.D.) dimension.

    • Available in 1"-3" O.D., sold by the foot
    • Made of 100% polished stainless steel
    • Seamed 15 gauge
    • UPS up to 7'
    • Priced per ft.
    1. If you want us to cut the tubing into smaller lengths than you are ordering, please tell us the lengths of tubing you need by keying that information into our comment area located just above the payment information of Step 2 of the Checkout Process.
    2. If your tubing can be cut in 3 ft. or 4 ft. lengths, the price will be discounted $1.00/ft.
    3. Please keep in mind that the longest piece that can ship by UPS is 7 feet. The longest piece that can ship by truck is 10 feet.
    4. There are no returns on this stainless steel exhaust tubing.
  • Dynatech 794-93026 TorQ Tip Exhaust Tips - Pair, 2-1/2 Inch
    Dynatech 794-93026 TorQ Tip Exhaust Tips - Pair, 2-1/2 Inch
    x
                

    Put the finishing touch on your new SuperMaxx or MuscleMaxx system. The all new Dynatech® TorQ Tip provides good looks and performance to any street rod. With their unique insert design, TorQ Tips allow for a flush fit with the outside diameter of your exhausts's tailpipe. This makes for a smooth, clean look that doesn't take away from your car's appearance like bulky, clamped-on tips tend to do. Another quality feature of these tips is the all Billet Aluminum construction, giving them the unmatched strength, function, and finish you've come to expect from Dynatech®. 

    • Fits: 2-1/2 Inch pipe
  • Chrome Side Exhaust Pipes w/ Mufflers, 60 Inch
    Chrome Side Exhaust Pipes w/ Mufflers, 60 Inch
    x
                

    Give your vehicle that custom look with a classic chrome shielded side exhaust system. Large chrome 2-1/4" I.D. inlet, 3" O.D. chrome outlet pipes and low back pressure six-sided louvered core painted black mufflers guarantee performance and produce a distinctive power tone. Complete installation flexibility is built in with the full 360° rotation feature on both inlet and outlet pipes. Includes mounting hardware.

    Not legal for sale or use in California on pollution controlled motor vehicles.

  • Dynatech 794-93031 TorQ Tip Exhaust Tips - Pair, 3 Inch
    Dynatech 794-93031 TorQ Tip Exhaust Tips - Pair, 3 Inch
    x
                

    Put the finishing touch on your new SuperMaxx or MuscleMaxx system. The all new Dynatech® TorQ Tip provides good looks and performance to any street rod. With their unique insert design, TorQ Tips allow for a flush fit with the outside diameter of your exhausts's tailpipe. This makes for a smooth, clean look that doesn't take away from your car's appearance like bulky, clamped-on tips tend to do. Another quality feature of these tips is the all Billet Aluminum construction, giving them the unmatched strength, function, and finish you've come to expect from Dynatech®. 

    • Fits: 3 Inch pipe
  • Mild Steel Exhaust Bend, 45 Degree, 2-1/2 Inch
    Mild Steel Exhaust Bend, 45 Degree, 2-1/2 Inch
    x
                

    Each pipe is expanded on one end to allow easy installation. 16-gauge mild steel. Natural, uncoated finish. Not Aluminized.

  • Mild Steel Exhaust U-Bend, 2-1/4 Inch
    Mild Steel Exhaust U-Bend, 2-1/4 Inch
    x
                

    Natural finish (uncoated) 18-gauge mandrel bent mild steel U-bends for building your own weld up headers or replacing bent or damaged header tubing.

    • 2-1/4" outside diameter header pipe
    • 3" bend radius
  • Dynatech 780-14630 Elbow Kit w/ Hardware, 3 Inch Tube Clamps
    Dynatech 780-14630 Elbow Kit w/ Hardware, 3 Inch Tube Clamps
    x
                

    Designed to best work with Dynatech® pavement late model economy crossover headers.

    Kit Includes:

    • (4) 3" elbows: 
      • (1) 42 degree, 8.50" long
      • (1) 60 degree, 12.88" long
      • (1) 42 degree, 12.50" long
      • (1) 30 degree, 13.63" long

    • (4) tube clamps and hardware

  • Dynatech 794-60207 Mild Steel J-Bend, 2-1/4 Inch
    Dynatech 794-60207 Mild Steel J-Bend, 2-1/4 Inch
    x
                

    Dynatech® stocks a complete inventory of mandrel bent J-bends. These are made from premium grade mild steel tubing. The bend radius of each tube is 1.5 times the O.D. of the tubing.

  • Dynatech 724-84420 SuperMaxx 2003 Dodge Ram 1500 4WD Catted Exhaust
    Dynatech 724-84420 SuperMaxx 2003 Dodge Ram 1500 4WD Catted Exhaust
    x
                

    Gain 17 HP and 15 Ft. Lbs. over the factory exhaust system! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your Dodge Ram 1500 4WD maximum performance both on and off road. Designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    • Collector Size: 2-1/2"
    • System Tube Size: 2-1/2"
    • Material: All Stainless Steel
    • OBD II Compliant: Yes
    • Hardware Included: Gaskets, Bolts, O2 Extensions
    • Fit: Direct Bolt-Up to any factory or aftermarket cat back

    2003-2004 Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 8