Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Engines At Speedway Motors

If you're ready to start making some serious power — and we mean SERIOUS power, you've come to the right place. Whether you're looking for a turn key crate engine or you're looking to build from the ground up, we've got the parts you need. We carry everything from the oil pan to the valve covers and everything in between. So if you're in the market for a new set of heads or pistons, remember that no one gets you more power for your dollar than Speedway Motors.

"Engine, Valve Covers and Accessories" Page 1 of 4

  • Fab. Alum. LS/Vortec Valve Covers w/o Coil Stands, Satin Anodized
    Fab. Alum. LS/Vortec Valve Covers w/o Coil Stands, Satin Anodized
    (Part #57520459)
    x
                

    Fully welded GM LS/Vortec Series fabricated valve covers feature a billet aluminum rail for increased strength. Covers include oil filler with cap. Coil stands have been removed for a smooth look. Includes silicone gaskets.

    NOTE: These covers do not have provisions to mount the factory ignition coils in the OEM location. You will have to relocate the coils when using these covers.

  • Edelbrock 41409 Classic 348/409 Satin Valve Covers
    Edelbrock 41409 Classic 348/409 Satin Valve Covers
    (Part #32541409)
    x
                

    Edelbrock first made these aluminum valve covers in the late '50s and they're still a classic. Made of heavy-gauge sand-cast aluminum, our classic finned valve covers are available in either a classic polished aluminum or durable black powder coated finish. Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

    • Chevy 348/409
    • Heavy gauge material
    • 3-13/16" overall height
    • Made in the U.S.A.
  • Technostalgia 8100 Oldsmobile Centerbolt Valve Cover Adapters
    Technostalgia 8100 Oldsmobile Centerbolt Valve Cover Adapters
    (Part #91017145)
    x
                Allows installation of 1987-Newer centerbolt valve covers on 1955-1986 S/B Chevy Heads, even early staggerbolt heads. Gaskets NOT included, but special bolts and spacers are.
            
  • Accel 9011C GM HEI 75-86 Extreme 9000 Spark Plug Wires-Over Valve
    Accel 9011C GM HEI 75-86 Extreme 9000 Spark Plug Wires-Over Valve
    (Part #1059011)
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic spark plug wire set. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI supression core
    • 500 Ohms/ft resistance
    • Ceramic boots will withstand 2000° F
    • Stainless terminals
    • For 1975-86 GM small block V8 HEI (over valve covers)

    Ceramic Wire Core Cut-A-Way (Link)

  • 1960-1986 Small Block Chevy Fabricated Valve Covers w/ Holes
    1960-1986 Small Block Chevy Fabricated Valve Covers w/ Holes
    (Part #91017129)
    x
                

    Whether you're going for the hardcore race look or just trying to save weight, these fabricated aluminum valve covers are for you! Each cover comes with a single baffeled 1-1/4" hole for PCV or oil fill. Can be painted, polished, or left in bare aluminum finish.

    Fits 1960-1986 Small Block Chevy 283-400 c.i. V8.

    Grommets & hardware not included. Use a 1-1/4" grommet.

  • Speedway Billet Valve Cover Spear Emblem Kit
    Speedway Billet Valve Cover Spear Emblem Kit
    (Part #91000029)
    x
                These dress up kits are perfect for giving your ride that custom look and works on nearly any flat surface.  Kits come complete with everything you need to install.
    • Add a custom touch to just about any flat surface
    • Great for valve covers, door panels, your imagination is the limit!
    • Kits include; 2 emblems, studs and nuts
    • You drill & tap emblems as needed
    • 11" x 1-1/2"
  • Chrome 1987-Up Small Block Chevy Centerbolt Valve Covers, 2-Hole
    Chrome 1987-Up Small Block Chevy Centerbolt Valve Covers, 2-Hole
    (Part #91017181)
    x
                

    These stock dimension valve covers are for 1987-up heads and Vortec style small block Chevy heads. They feature a beautiful chrome finish to dress up your engine bay. These valve covers have 2-holes per cover with separate oil fill and PCV holes. Holes are 1-1/4" with baffles.

    • Stock dimension valve covers
    • For 1987-up heads and Vortec style small block Chevy heads
    • Beautiful chrome plated steel finish
    • 2-holes per cover with separate oil fill and PCV holes
    • Grommets are NOT included
    • Sold as a pair
    • Valve Cover Depth:  2-1/8"
    • Hole Size:  1-1/4"
    • Hole Style:  Push-in
    • Baffeled:  Yes
    • Suggested Bolt Length:  3-1/2"
  • Valve Cover Adapter for Center Bolt Heads
    Valve Cover Adapter for Center Bolt Heads
    (Part #91017157)
    x
                

    As you know, you can't run a stud girdle when using centerbolt valve covers. These handy adaptors simply bolt to your centerbolt heads which allows you to use standard valve covers and stud girdles. O-ring seal on head side. Use standard gasket on valve cover side. Has bolt holes to use with early '60-'86 "straight bolt" valve covers as well as '55-'59 staggered bolt valve covers.

    We also carry adaptor plates (# 910-17145) to put '87 and newer center-bolt valve covers on '60-'86 heads.
     

  • Oldsmobile Valve Covers for Small Block Chevy
    Oldsmobile Valve Covers for Small Block Chevy
    (Part #9108202)
    x
                These neat valve covers are designed to look like the early Oldsmobile valve covers but fit late style small block Chevys using center bolt valve cover cylinder heads.  They can also be used with conventional small block cylinder heads by using the valve cover adapter kit listed below.  Order one set of valve covers and one set of looms.

    910-8202: These valve covers have one, 1.22" hole in each cover to accept a PCV valve grommet, or a filler plug. They measure 2.5" from their own gasket surface to the underside of the 'top' of the valve cover. The customer will add the thickness of their valve cover gasket and/or the adapter for early heads, to determine rocker arm clearances. The plain finish valve covers and indeed plain, die-cast aluminum. Not painted.
  • Speedway S/B Chevy Steel Valve Covers w/ Crossover Breather Tube
    Speedway S/B Chevy Steel Valve Covers w/ Crossover Breather Tube
    (Part #91017140)
    x
                

    Includes two tall steel valve covers, two shielded breathers, one crossover tube, four stainless clamps and two hoses.

    • Tall valve covers clear most stud girdles or roller rocker arms
    • Washable breather filter elements
    • Fits '60-'86 Small Block Chevy V8
  • Edelbrock 41439 Classic Series Valve Cover with Breather Hole, Satin
    Edelbrock 41439 Classic Series Valve Cover with Breather Hole, Satin
    (Part #32541439)
    x
                

    This classic series valve cover is manufactured from sand-cast, high quality, heavy gauge aluminum. Edelbrocks valve covers feature finishes to complete the look of your engine compartment. Made in the U.S.A.

    • 1959-86 Chevy 262-400 Small Block
    • 3-1/2" Overall Height
    • With Fill Hole
    • Satin finish

     

  • 1987-Up Small Block Chevy Valve Cover Center Hold Down Bolts
    1987-Up Small Block Chevy Valve Cover Center Hold Down Bolts
    (Part #5501397)
    x
                

    Fits 1987 and up Small Block Chevy cylinder heads. Chrome plated steel. Counter-sunk allen head bolt. Fits "tall" aluminum valve covers.

    • 5-1/8" overall length
    • 4-7/8" to start of taper
  • Fab. Alum. LS/Vortec Valve Covers w/Coil Stands, Satin Silver Anodized
    Fab. Alum. LS/Vortec Valve Covers w/Coil Stands, Satin Silver Anodized
    (Part #57520458)
    x
                Fully welded GM LS/Vortec Series fabricated valve covers feature a  billet aluminum rail for increased strength. Covers include oil  filler  with cap and ignition coil stands to mount coils in the factory  location. Includes silicone gaskets.
            
  • Edelbrock 4140 348/409 Chevy Finned Aluminum Valve Covers
    Edelbrock 4140 348/409 Chevy Finned Aluminum Valve Covers
    (Part #3254140)
    x
                

    Edelbrock first made these aluminum valve covers in the late 50's and they're still a classic. Mad of heavy-gauge sand-cast aluminum. Overall height is measured from base to top at the highest point. Overall height is 3-13/16". Edelbrock classic valve covers can be machined to accept breathers if desired.

    Made in the U.S.A. 

  • Speedway Small Block Chevy Tall Aluminum Valve Covers
    Speedway Small Block Chevy Tall Aluminum Valve Covers
    (Part #91017106)
    x
                

    Clears rocker arm stud girdles or roller rockers. Perfect for welding in breather tubes. Plain, as-cast finish.

    Fits '60-'86 S/B Chevy V8.

  • Chevy LS1/LS6 Finned Valve Covers, Plain
    Chevy LS1/LS6 Finned Valve Covers, Plain
    (Part #5721012)
    x
                

    If you are running a '97-Up LS1 style engine in your classic street rod, these valve covers are for you. These finned covers have a cast-in breather/PCV hole in each cover. They only use the 2 end bolts for mounting (stock uses four) for a cleaner look. The sand cast aluminum construction provides stiffness so four bolts are not needed to apply pressure evenly to the gasket. Comes with gaskets and hardware.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Cast-in internal baffles
    • Clears Jesel roller rockers
    • Mounting hardware included

    Note: There are no provisions for the original coil packs. Use our relocation harness to move coil packs to the fenders or firewall. 

    Finned Valve Cover Specs (PDF) 

  • Technostalgia 2001 Oldsmobile Rocket Valve Cover Decal Set
    Technostalgia 2001 Oldsmobile Rocket Valve Cover Decal Set
    (Part #9102001)
    x
                Love that classic Oldsmobile look? We recommend these decals to go with our Olds valve covers to get that classic look your going for.
            
  • Edelbrock 4144 1960-86 Small Block Chevy Finned Valve Covers w/ Holes
    Edelbrock 4144 1960-86 Small Block Chevy Finned Valve Covers w/ Holes
    (Part #3254144)
    x
                

    Classic 1960-1986 Small Block Chevy Edelbrock finned valve covers with oil fill hole. This style of valve covers was first made in the 1950's and they're still cool today. They are tall enough to clear roller rockers.

    • Aluminum
    • One valve cover has a hole and grommet is included for a PCV valve
    • Other valve cover has a threaded hole (female) and a male threaded aluminum cap with O-ring seal
    • Included grommet can be used in place of the cap for a push in breather
    • Includes baffle and pins to use inside the valve cover if desired
  • Small Block Ford Steel Valve Covers with Breather
    Small Block Ford Steel Valve Covers with Breather
    (Part #91550200)
    x
                302/351W valve cover, stamped steel with 1-1/2" breather tubes.
            
  • T-Style Wing Nut
    $2.49
    Product Rating: 4.60 Stars
    T-Style Wing Nut
    (Part #5501394)
    x
                

    Premium chrome plating and classic styling make this hold down the first choice of rodders everywhere! Threads are extra-long to accomodate nearly any combination of valve cover, clamps and gasket thickness. Just cut off to length you need.  Sold individually.

    Wing nut has 1/4" coarse threads.

  • Speedway Chevy Tall Valve Covers w/ Breather Tubes, Black Steel
    Speedway Chevy Tall Valve Covers w/ Breather Tubes, Black Steel
    (Part #91017154)
    x
                

    Valve covers have 1-3/8" breather tubes on one side only. Extra tall to clear rocker arm stud girdles or roller rockers. Fits '60-'86 small block Chevy V8. Breathers not included.

  • Small Block Chevy Polished Alum Tall Valve Covers, Push-In 1-1/4 Hole
    Small Block Chevy Polished Alum Tall Valve Covers, Push-In 1-1/4 Hole
    (Part #91017104)
    x
                

    These polished aluminum valve covers fit 1960-1986 S/B Chevys and are made to GM specs. They feature OEM style baffles and dippers.

    Valve cover depth is 3-9/16". One 1-1/4" push-in hole per cover. Suggested bolt length is 1-1/4".

     

  • B/B Chevy Tall Chrome Valve Covers
    B/B Chevy Tall Chrome Valve Covers
    (Part #91017164)
    x
                

    These smooth, no-name, stamped steel covers have a beautiful chrome finish. Each has a 1.25" push-in breather hole. These valve covers do not contain baffles.

    • Depth: 3-5/16"
    • Holes Per Cover:  1
    • Size & Style of Hole:  1-1/4" push in
    • Suggested Bolt Length:  3/4"
  • Valvetrain Oil Deflector
    $22.99
    Valvetrain Oil Deflector
    (Part #54567700)
    x
                Redirects oil from push rods to fulcrum balls, rockers and springs to provide maximum lubrication and cooling. Extends life of stock valve train assembly. Manufactured from lightweight aluminum. Ideal for claimer motors. Fits all S/B Chevy and Ford 302 motors with stamped rocker arms. 

    Polylocks are required for the installation of this item. Please see our suggestions on this page.

  • Ford Racing 302-001 Small Block Aluminum Valve Covers
    Ford Racing 302-001 Small Block Aluminum Valve Covers
    (Part #91550205)
    x
                

    Polished aluminum valve covers are 3-3/4" tall with black letters. Will clear stud girdle and roller rockers. One hole in each cover for a PCV or a breather. Grommets are supplied for both, as well as baffle plates to install inside the covers for oil control. Comes with instructions.

    • Style of hole: Push-in
    • Suggested bolt length: 1"
    • These valve covers have baffles
  • Short Finned Small Block Chevy Valve Covers w/Holes
    Short Finned Small Block Chevy Valve Covers w/Holes
    (Part #9116031)
    x
                

    These valve covers not only look cool, they feature a short design and work with Small Block Chevy engines.  Finned with aluminum construction keeps these valve covers lightweight.

    • Short style
    • Finned design
    • Aluminum construction
    • Fits Small Block Chevy V8 engines
    • Includes hardware, baffles, and grommets
  • Edelbrock 4160 1960-95 Small Block Ford Finned Valve Covers
    Edelbrock 4160 1960-95 Small Block Ford Finned Valve Covers
    (Part #3254160)
    x
                

    Edelbrock first made these aluminum valve covers in the late '50s and they're still a classic. Made of heavy-gauge sand-cast aluminum. Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired. They are tall enough to clear roller rockers. Overall height is 3-3/4".

    Made in the USA. 

  • Offenhauser 5417 Chevy 6-Cylinder Finned Valve Cover
    Offenhauser 5417 Chevy 6-Cylinder Finned Valve Cover
    (Part #5605417)
    x
                

    This polished Offenhauser finned aluminum valve cover will shine up your 194-230-250-292 Chevy 6-cylinder from 1962-1975.

    1. This cover has one hole for a filler/breather. We suggest Twist-In Breather 550-2061.
    2. There are no "baffles" and no hole for a PCV valve. You would have to make your own hole.
    3. May have clearance issues with oversize valve springs.
    4. Please note that the valve cover is not polished between the fins on the top and in the side recesses on both sides of the valve cover.
  • Edelbrock Classic Ford FE Satin Valve Covers
    Edelbrock Classic Ford FE Satin Valve Covers
    (Part #32541629)
    x
                

    Edelbrock first made these aluminum valve covers in the late '50s and they're still a classic. Made of heavy-gauge sand-cast aluminum, our classic finned valve covers are available a classic satin aluminum finish. Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

    • 1958-1976 Ford FE
    • 5" height
    • Heavy gauge aluminum material
    • Made in the USA
  • Small Block Chevy Short Chrome Valve Covers
    Small Block Chevy Short Chrome Valve Covers
    (Part #91017162)
    x
                These smooth, no-name, stamped steel covers have a beautiful chrome finish. Each has a 1.25" push-in breather hole. 

    Suggested bolt length is 3/4".

  • 1987-Up Small Block Chevy Tall Valve Covers, Ball Milled
    1987-Up Small Block Chevy Tall Valve Covers, Ball Milled
    (Part #91017102)
    x
                

    Polished cast aluminum valve covers with the look of billet for your late Small Block Chevy center bolt heads. Ball milled top design. Includes baffles and valve cover bolts.

    • Overall height: 3-5/8"
    • Valve cover depth: 3-1/2"
    • One 1-3/16" push in hole per cover
  • Ansen 120-1003 Big Block Chevy Valve Cover Spacers
    Ansen 120-1003 Big Block Chevy Valve Cover Spacers
    (Part #1351099)
    x
                The perfect finishing touch for your engine. 
            
  • Ansen 110-3001 1960-1986 Small Block Chevy Valve Covers
    Ansen 110-3001 1960-1986 Small Block Chevy Valve Covers
    (Part #1353001)
    x
                

    The perfect finishing touch for your small block Chevy engine.  These cast aluminum standard height valve covers fit 1960-86 small block Chevy V8.

    No holes for breathers or fill caps.

  • B/B Chevy Short Chrome Valve Covers
    B/B Chevy Short Chrome Valve Covers
    (Part #91017163)
    x
                These smooth, no-name, stamped steel covers have a beautiful chrome finish. Each has a 1.25" push-in breather hole. These valve covers do not contain baffles.
    • Depth: 2-1/4"
    • Holes Per Cover:  1
    • Size & Style of Hole:  1-1/4" push in
    • Suggested Bolt Length:  3/4"
  • Edelbrock 41609 Classic Small Block Ford Satin Valve Cover
    Edelbrock 41609 Classic Small Block Ford Satin Valve Cover
    (Part #32541609)
    x
                

    First made in the late '50s, these Classic Series Valve Covers are still a popular, timeless look for just about any vehicle. All are manufactured from sand-cast, high quality heavy-gauge aluminum. They come available in 3 great looking finishes to fit your personal style.

    Edelbrock's Classic Series Valve Covers feature the same great styling and finishes as the classic air cleaners to complete the look of your engine compartment. The application specific design means you'll get a perfect fit right out of the box. They are available for many popular applications and are designed to clear most aluminum roller rockers. 

    • Ford 221-351W V8 1962-95
    • 3-3/4" Height
    • For use on pre-pollution controlled vehicles
    • Made in the USA

     

     

  • Speedway Small Block Chevy Tall Steel Valve Covers
    Speedway Small Block Chevy Tall Steel Valve Covers
    (Part #91017105)
    x
                Clears rocker arm stud girdles or roller rockers. Perfect for welding in breather tubes. Fits '60-'86 S/B Chevy V8.
            
  • Moroso 68050 Billet Aluminum Small Block Chevy Sprint Valve Covers
    Moroso 68050 Billet Aluminum Small Block Chevy Sprint Valve Covers
    (Part #54568050)
    x
                

    These Moroso billet aluminum valve covers are designed for use with small block Chevy engines with 12° to 23° cylinder heads with the valves in the conventional location.  Each valve cover is CNC machined from a billet aluminum bar.  The end result is that each valve cover weighs 1.69 lbs without sacrificing strength.  Airtight sealing allows the engine to pull greater vacuum for improved ring seal and power.

    • Black anodized finish
    • Billet aluminum
    • Designed for Sprint Cars
    • Fits SBC engines with 12° to 23° heads
    • Works in other applications that require strong lightweight valve covers
  • 1958-86 SB Chevy Tall Steel Valve Covers, Von Hot Rod Pinstriping
    1958-86 SB Chevy Tall Steel Valve Covers, Von Hot Rod Pinstriping
    (Part #9119215)
    x
                These tall chrome valve covers are perfect for customs and street rods.  They feature baffled and tall styling with a special edition pinstriping design by Von Hot Rod.
    • Chevy small block tall chrome steel valve covers
    • Fit 1958-86 Chevy 283-305-327-350 small block engines
    • Single hole in each cover
    • Height: 3-5/8 "
    • Special edition - pinstriping design by Von Hot Rod
    • Gaskets, hardware, grommets, and breathers - NOT included
    • 1.25" push-in hole style
    • Sold as a pair
  • Small Block Ford Fabricated Aluminum Valve Covers
    Small Block Ford Fabricated Aluminum Valve Covers
    (Part #91017135)
    x
                Whether you're going for the hardcore race look or  just trying to save weight, these fabricated aluminum valve covers are  for you! These fully welded sheet aluminum covers feature a 1/8" thick  flange for a great seal. Can be painted, polished, or left in bare  aluminum finish. Bolts and washers included for mounting with valve  cover.

    Fits 1962-1985 Small Block Ford 260-289-302-351W & 5.0L

  • Offenhauser 2731 1937-62 Chevy Six Cylinder Valve Cover
    Offenhauser 2731 1937-62 Chevy Six Cylinder Valve Cover
    (Part #5602731)
    x
                

    We have these hard-to-find covers for your 1937-1962 Chevrolet 216, 235 and 261 engines. These Chevy 6 cylinder finned aluminum Offenhauser valve covers will shine up your old Stovebolt. 

    NOTE: To use on 1954-1962 inline six head, you will need to supply a 1937-1953 style gasket, a pair of washers and stud seals typical of '37-'53, and a pair of acorn nuts to fit the long studs that come with the cover. This cover is a direct replacement for the 1937-1953 Chevy.

Goto Previous PagePrevious Page
1 2 3 4