Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Engines At Speedway Motors

If you're ready to start making some serious power — and we mean SERIOUS power, you've come to the right place. Whether you're looking for a turn key crate engine or you're looking to build from the ground up, we've got the parts you need. We carry everything from the oil pan to the valve covers and everything in between. So if you're in the market for a new set of heads or pistons, remember that no one gets you more power for your dollar than Speedway Motors.

"Engine Mounts and Adapters, Engine Mount Kits" Page 1 of 2

  • Trans-Dapt 4686 Vega V8 Swap Mounts Only
    Trans-Dapt 4686 Vega V8 Swap Mounts Only
    SKU-7204686
    x
                

    Fits small block Chevy V8 with automatic or manual transmissions. Works with "short" style water pump. Slight modification to oil pan and car's floor pan will be needed. Minimal cutting and welding required.

    • Includes motor mount brackets, bushings, plates and rear crossmember 
    • Mounts 283-400 S/B Chevy and LT1
    • Designed for use with TH-350 automatic trans

    Note:  Will not fit angle plug heads, power steering, power brakes, air conditioning or a Powerglide transmission.

    Note:  These kits are painted from the manufacturer for photo/shipping purposes only and are intended to painted according to the installer's preference.

    720-4686 Instructions (PDF)

  • 1955-57 Chevy Engine Block Side Mount Kit
    1955-57 Chevy Engine Block Side Mount Kit
    SKU-7204175
    x
                On your 1955-57 Chevy car, the front motor mounts are at the front of the block and the rear mount attaches to the bellhousing. This works fine for original use but makes it hard to swap in a different trannsmission or add belt driven accessories to the front of the engine. 

    Use with engine cushions 910-18012 and transmission crossmember 916-28910 listed below. No welding, but drilling required.

    720-4175 Instructions (PDF)

  • Garage Sale - Speedway Universal Chevy Steel Engine Mount Kit-Pads/Cushion/Hardware
    Garage Sale
    Garage Sale - Speedway Universal Chevy Steel Engine Mount Kit-Pads/Cushion/Hardware
    SKU-UP48195
    x
                Please view the product's page for more information
            
  • Chevy to 1955-1959 Chevy Pickup Motor Mounts
    Chevy to 1955-1959 Chevy Pickup Motor Mounts
    SKU-7204771
    x
                

    Chevy V8s into 1955-1959 Chevy pickup & panel trucks. Plates bolt in.

    One mount kit has enough brackets, cushions, bolts and hardware to do both sides of the engine.

    1955-1959 Chevy Motor Mount Installation Instructions (pdf)

  • Billet Small Block Chevy Motor Mounts
    Billet Small Block Chevy Motor Mounts
    SKU-91018030
    x
                

    Our billet motor mounts are machined from 2025 aluminum and include bushing inserts. Fully polished finish. Includes universal frame adaptors.

    • Flange Face to Bushing Eye:  3.5"
    • These mounts are generally too wide for Model T & Model A chassis
  • Small Block Ford to 1953-1964 Ford Pickup Motor Mounts
    Small Block Ford to 1953-1964 Ford Pickup Motor Mounts
    SKU-7204145
    x
                Ford 221-351W V8s into 1953-1964 Ford pickup & panel trucks. Frame plates bolt-in.
            
  • Hooker Headers 12624HKR LS Swap Engine Mount Adapter, 1/2 Inch Forward
    Hooker Headers 12624HKR LS Swap Engine Mount Adapter, 1/2 Inch Forward
    SKU-91618020
    x
                

    Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount. 

    • Constructed of sturdy 3/8” thick hot rolled steel
    • Designed for lightweight, rigidity and a clean appearance
    • Precision machined for perfect alignment
    • Zinc plated for durability and corrosion resistance
    • Come complete with counter sink machine screws and instructions
    • Work with all small-block Chevy mounts and frame towers
    • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

    916-18020 Instructions (PDF)

  • Universal Engine Mount Kits
    $99.99
    Product Rating: 4.75 Stars
    Universal Engine Mount Kits
    SKU-91018033
    x
                

    Available for small block Chevy, GM LS or Ford applications.

    Each kit includes:

    • Weld on frame pads
    • Rubber bolt through cushion
    • Engine pads
    • Hardware
  • Billet Aluminum Black Small Block Chevy Motor Mounts
    Billet Aluminum Black Small Block Chevy Motor Mounts
    SKU-91018029
    x
                

    Our universal billet engine mounts are machined from 2025 aluminum and include bushing inserts. They feature a painted black finish and include universal frame adapters.

    • Flange Face to Bushing Eye:  3.5"
    • Fits Small Block Chevy applications
    • Painted black billet aluminum

    Note: These mounts are generally too wide for Model T & Model A chassis.

     

  • Trans-Dapt 4696 1984-1997 Astro Van Engine Swap Kit
    Trans-Dapt 4696 1984-1997 Astro Van Engine Swap Kit
    SKU-7204696
    x
                

    Put a 283-400 S/B Chevy in your 1984-1997 Chevy Astro van using stock 4.3L V-6 motor mounts. 

  • Small Block Chevy Engine Mount Kit
    $74.99
    $79.99
    Product Rating: 5.00 Stars
    Small Block Chevy Engine Mount Kit
    SKU-91018212
    x
                These complete engine conversion mount kits are perfect for that custom hot rod.  They are designed to work with almost any fame that is up to 39" wide.  They feature heavy duty tubing with quality welds sure to hold up to all that SBC horsepower.  Kits include 3-bolt rubber motor mounts and crossmember with ends for either bolt-in or weld-in applications.
    • Crossmember mounts a Chevy engine in almost any frame up to 39" wide
    • Heavy wall 1-3/4" tubing, MIG welded
    • Comes with ends for bolt-in or weld-in applications
    • 3-bolt S/B Chevy rubber motor mounts are manufactured to meet or exceed OEM specifications
    • Unique rubber formula provides good abrasion resistance and aging stability
  • Stallard Micro Sprint 2003-05 Yamaha R6 Motor Mount Slider Kit
    Stallard Micro Sprint 2003-05 Yamaha R6 Motor Mount Slider Kit
    SKU-9604001
    x
                

    This kit includes machined aluminum plates with a black anodize finish, and everything else needed to easily adjust the chain and motor. Designed to work with 2005 to present Stallard chassis.

    • Includes everything needed to easily adjust the chain and motor
    • Fits 2005 to present Stallard chassis
    • 2003-05 Yamaha R6 applications

     

     

  • Trans-Dapt 4102 Chevy to 1953-1964 Ford Pickup Motor Mounts
    Trans-Dapt 4102 Chevy to 1953-1964 Ford Pickup Motor Mounts
    SKU-7204102
    x
                

    Chevy V8s into 1953-1964 Ford pickup & panel trucks. Plates bolt-in.

    Chevy To Ford Motor Mount Instructions (pdf)

  • Ford V8 Engine 351C Rubber Motor Mounts, 2-Hole
    Ford V8 Engine 351C Rubber Motor Mounts, 2-Hole
    SKU-91018014
    x
                

    It’s getting harder and harder to find Ford V8 engine mounts. These high-quality factory-style mounts are available in a two-bolt configuration for 351 Cleveland engines and a three-bolt configuration for 351M and 400M engines.

    • Two-bolt mounts for most early 351 Cleveland applications
    • Three-bolt mounts for most 351 and 400 “Modified” series engines
    • Be sure to check the number of bolt holes!
    • Heavy-duty construction
    • Rubber encapsulated mount ensures durable, vibration-free service
    • Powder coated black finish

     

  • Stallard Micro Sprint 2005-Up Yamaha Motor Mount Slider Kit
    Stallard Micro Sprint 2005-Up Yamaha Motor Mount Slider Kit
    SKU-9604000
    x
                

    This kit includes machined aluminum plates with a black anodize finish, and everything else needed to easily adjust the chain and motor. Designed to work with 2005 to present Stallard chassis.

    • Includes everything needed to easily adjust the chain and motor
    • Fits 2005 to present Stallard chassis
    • Yamaha applications

     

  • 5.7 New Style Hemi Weld-In Motor Mounts
    5.7 New Style Hemi Weld-In Motor Mounts
    SKU-7204504
    x
                These New Style 5.7 Hemi motor mount kits allow you to put that 'little bit different' engine in your project. They have urethane bushings and include both the engine and frame brackets. Frame brackets must be cut to fit and welded to frame. 
            
  • S/B, B/B or 90 Degree V6 Chevy Crossmember Mount
    S/B, B/B or 90 Degree V6 Chevy Crossmember Mount
    SKU-91618012
    x
                

    Mount a Chevy engine in almost any frame up to 39" wide. Heavy wall 1-3/4" tubing, MIG welded. Comes with ends for bolt-in or weld-in applications.

    • Maximum working width: 39"
    • Minimum working width: 21"
    • 5.50" center drop

    Use with 1964-1967 Chevy-style mounts 91018012 (rubber) or 91018015 (polyurethane).

  • Hooker Headers 12622HKR LS Swap Engine Mount Adapter, 3 Inch Forward
    Hooker Headers 12622HKR LS Swap Engine Mount Adapter, 3 Inch Forward
    SKU-91618018
    x
                

    Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount.

    • Constructed of sturdy 3/8” thick hot rolled steel
    • Designed for lightweight, rigidity and a clean appearance
    • Precision machined for perfect alignment
    • Zinc plated for durability and corrosion resistance
    • Come complete with counter sink machine screws and instructions
    • Work with all small-block Chevy mounts and frame towers
    • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

    916-18018 Instructions (PDF)

  • Ford FE Series Big Block Motor Mount
    Ford FE Series Big Block Motor Mount
    SKU-91618015
    x
                Mounts a 352, 360, 390, 406, 427 or 428 Ford FE V8 engine into frames up to 38" wide. Uses heavy 1-1/2" O.D. mild steel tubing. Black powder coat finish. 

     


    NOTE: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • Garage Sale - Trans-Dapt Small Block Ford To Chevy Pick-Up Mount Kit
    Garage Sale
    Garage Sale - Trans-Dapt Small Block Ford To Chevy Pick-Up Mount Kit
    SKU-7204772
    x
                

    This mount kit is garage sale priced because they are discontinued from our current product line.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Weld-In 460 Ford Mount Kit
    Garage Sale
    Garage Sale - Weld-In 460 Ford Mount Kit
    SKU-UP30134
    x
                
    These 429-460 Ford motor mount kits allow you to put that 'little bit different' engine in your project. They have urethane bushings and include both the engine and frame brackets. Frame brackets must be cut to fit and welded to frame.  
     
    This is Garage Sale priced because it is short one metal bushing sleeve.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  
  • Stallard Micro Sprint Kawasaki Motor Mount Slider Kit
    Stallard Micro Sprint Kawasaki Motor Mount Slider Kit
    SKU-9604003
    x
                

    This kit includes machined aluminum plates with black anodize finish, and everything else needed to easily adjust the chain and motor on your Micro Sprint Kawasaki. Designed to work with 2005 to present Stallard chassis.

    • Includes everything needed to easily adjust the chain and motor
    • Fits 2005 to present Stallard chassis
    • Micro Sprint Kawasaki applications
  • 3-Bolt Chevy Rubber Motor Mounts for 90 Degree V6, SB/Big Block V8
    3-Bolt Chevy Rubber Motor Mounts for 90 Degree V6, SB/Big Block V8
    SKU-91018012
    x
                

    These 3-bolt S/B Chevy rubber motor mounts are manufactured to meet or exceed OEM specifications. Fits most 1958-73 Chevy passenger cars with small block V8. Sold as a pair.

    • Unique rubber formula provides good abrasion resistance and aging stability
    • Ensures maximum life and performance
    • Application-specific Durometer (hardness) based on engine weight & torque
    • Special Chemlock® bonding agent ensures superior rubber-to-metal bond
  • Hooker Headers 12623HKR LS Swap Engine Mount Adapter, 1-1/4 In Forward
    Hooker Headers 12623HKR LS Swap Engine Mount Adapter, 1-1/4 In Forward
    SKU-91618019
    x
                

    Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount.

    • Constructed of sturdy 3/8” thick hot rolled steel
    • Designed for lightweight, rigidity and a clean appearance
    • Precision machined for perfect alignment
    • Zinc plated for durability and corrosion resistance
    • Come complete with counter sink machine screws and instructions
    • Work with all small-block Chevy mounts and frame towers
    • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

    916-18019 Instructions (PDF)

  • Motor Mount Shims, Small Block Chevy
    $17.99
    $25.00
    Product Rating: 5.00 Stars
    Motor Mount Shims, Small Block Chevy
    SKU-7204125
    x
                
    • .180" thick
    • Correct misalignments
  • Garage Sale - 1979-2004 Mustang K-Member Headers, BBF
    Garage Sale
    Garage Sale - 1979-2004 Mustang K-Member Headers, BBF
    SKU-AUP870
    x
                Please view the product's page for more information
            
  • Early Hemi Universal Side Engine Mounts
    Early Hemi Universal Side Engine Mounts
    SKU-1355158
    x
                

    If you want to shoehorn an Early Hemi in your Hot Rod, we've got you covered. These mounts bolt to the side of the block and allow you to use our bolt-thru cushion kit. They have two sets of cushion holes to allow for different frame widths. The frame mounting bracket is up to you to design and build.

    For the following side tab configuration on the block:

    • Drivers Side - 2 holes to the front & 1 hole to the rear
    • Passenger Side  - 2 holes to the rear & 1 hole to the front
    If the side tabs on both side of the block have 2 holes to the front and 1 hole to the rear, this bracket WILL NOT work.

     

  • Big Block Ford Current Big Block Motor Mount
    Big Block Ford Current Big Block Motor Mount
    SKU-7209313
    x
                

    Mounts 1969-up 429 and 460 engines in most frames from 28"-38" wide. Just trim to width and either weld it directly to frame or to the 3 hole flanges (included) for bolt-in convenience. Black powder coat finish.

    720-9313 Instructions (PDF)

     

     

    NOTE: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • Small Block Ford 2-Bolt Rubber Motor Mounts
    Small Block Ford 2-Bolt Rubber Motor Mounts
    SKU-91018013
    x
                

    These 2-bolt S/B Ford rubber motor mounts are manufactured to meet or exceed OEM specifications. Fits most 1965-78 Ford fullsize passenger cars with Small Block 289, 302, and 351W V8s. Sold as a pair (left & right side). 

    • Unique rubber formula provides good abrasion resistance and aging stability
    • Ensures maximum life and performance
    • Application-specific Durometer (hardness) based on engine weight & torque
    • Special Chemlock® bonding agent ensures superior rubber-to-metal bond
  • Stallard Micro Sprint 2007-Up Honda Motor Mount Slider Kit
    Stallard Micro Sprint 2007-Up Honda Motor Mount Slider Kit
    SKU-9604004
    x
                

    This kit includes machined aluminum plates with black anodize finish, and everything else needed to easily adjust the chain and motor on your 2007-later Honda. Designed to work with 2005 to present Stallard chassis.

    • Includes everything needed to easily adjust the chain and motor
    • Fits 2005 to present Stallard chassis
    • Micro Sprint Honda applications

     

  • 1947-54 Chevy Pickup Motor Mounts for LS Series Engine Swap
    1947-54 Chevy Pickup Motor Mounts for LS Series Engine Swap
    SKU-910547541
    x
                
    These LS Series Chevy bolt-in motor mounts are designed for use with Speedway 1947-'54 Chevy Pickup Mustang II Bolt-In Crossmember # 910-44754. They will bolt right in for your new LS engine.  Kits include steel frame mounts, steel engine mounts, rubber cushion set, and all hardware.
    • Works only with crossmember (91044754)
    • For LS Series Chevy engines
    • For 1947-54 Chevy Pickups

    Includes:

    • Steel frame mounts
    • Steel engine mounts
    • Rubber cushion set
    • All hardware
  • 401-425 Nailhead Buick Weld-In Motor Mounts
    401-425 Nailhead Buick Weld-In Motor Mounts
    SKU-7204502
    x
                These 401-425 Nailhead Buick motor mount kits allow you to put that "little bit different" engine in your project. They have urethane bushings and include both the engine and frame brackets. Frame brackets must be cut to fit and welded to frame. 
            
  • 429-460 Ford Weld-In Motor Mounts
    429-460 Ford Weld-In Motor Mounts
    SKU-7204503
    x
                These 429-460 Ford motor mount kits allow you to put that 'little bit different' engine in your project. They have urethane bushings and include both the engine and frame brackets. Frame brackets must be cut to fit and welded to frame. 
            
  • Garage Sale - Chevy to 1955-1959 Chevy Pickup Motor Mounts
    Garage Sale
    Garage Sale - Chevy to 1955-1959 Chevy Pickup Motor Mounts
    SKU-UP48166
    x
                Please view the product's page for more information
            
  • Stallard Micro Sprint 2007-Up Suzuki Motor Mount Slider Kit
    Stallard Micro Sprint 2007-Up Suzuki Motor Mount Slider Kit
    SKU-9604005
    x
                

    This kit includes machined aluminum plates with black anodize finish, and everything else needed to easily adjust the chain and motor on your 2007-newer Suzuki. Designed to work with 2005 to present Stallard chassis.

    • Includes everything needed to easily adjust the chain and motor
    • Fits 2005 to present Stallard chassis
    • Micro Sprint Suzuki applications
  • Ansen 6872 1953-1964 Ford Pickup Frame Adapter
    Ansen 6872 1953-1964 Ford Pickup Frame Adapter
    SKU-1356872
    x
                

    This specially designed frame adapter allows professional installation of almost any engine into the 1953-1964 Ford pickup frame. Heavy duty construction is designed to mount large motors.

    Engine Mounting Guide

    1. Combine with one of the following motor mounts:
    2. Then add our cushion kit 720-9314 to finish your conversion.
  • Stallard Micro Sprint 1999-02 Yamaha R6 Motor Mount Slider Kit
    Stallard Micro Sprint 1999-02 Yamaha R6 Motor Mount Slider Kit
    SKU-9604002
    x
                

    This kit includes machined aluminum plates with a black anodize finish, and everything else needed to easily adjust the chain and motor. Designed to work with 2005 to present Stallard chassis.

    • Includes everything needed to easily adjust the chain and motor
    • Fits 2005 to present Stallard chassis
    • 1999-02 Yamaha R6 applications

     

  • Garage Sale - Small Block Ford to 1953-1964 Ford Pickup Motor Mounts
    Garage Sale
    Garage Sale - Small Block Ford to 1953-1964 Ford Pickup Motor Mounts
    SKU-UP48469
    x
                

    This is garage sale priced because it was scratched in shipping.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    

     

    Ford 221-351W V8s into 1953-1964 Ford pickup & panel trucks. Frame plates bolt-in. 

  • Garage Sale - Stallard Micro Sprint 2007-Up Suzuki Motor Mount Slider Kit
    Garage Sale
    Garage Sale - Stallard Micro Sprint 2007-Up Suzuki Motor Mount Slider Kit
    SKU-UP44637
    x
                

     This slider kit is garage sale priced because it is missing a few of the pieces, what you see is what you get.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    This kit includes machined aluminum plates with black anodize finish, and everything else needed to easily adjust the chain and motor on your 2007-newer Suzuki. Designed to work with 2005 to present Stallard chassis.

    • Includes everything needed to easily adjust the chain and motor
    • Fits 2005 to present Stallard chassis
    • Micro Sprint Suzuki applications
  • Hooker Headers 12611HKR LS Swap Engine Mount Adapter, Stock Location
    Hooker Headers 12611HKR LS Swap Engine Mount Adapter, Stock Location
    SKU-91618021
    x
                

    Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount. 

    • Constructed of sturdy 3/8” thick hot rolled steel
    • Designed for lightweight, rigidity and a clean appearance
    • Precision machined for perfect alignment
    • Zinc plated for durability and corrosion resistance
    • Come complete with counter sink machine screws and instructions
    • Work with all small-block Chevy mounts and frame towers
    • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

    916-18021 Instructions (PDF)

Goto Previous PagePrevious Page
1 2