Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Shop Edelbrock Products At Speedway Motors

Proven Performance is the philosophy that began when Vic Edelbrock Sr. founded Edelbrock Performance Parts in 1938. This philosophy continues today with the same high standard of performance and quality that goes into every Perfomer Series intake manifold, Edelbrock 94 carburetor, and Flathead cylinder head. Vic Edelbrock Sr. would be proud of what has grown out of his small racing parts garage in Los Angeles, CA., just like Speedway Motors is proud to carry his products.

Featured Products
  • Edelbrock 1099 Pro-Flo Air Cleaner Elements Air Filter, Triangle
    New
    Edelbrock 1099 Pro-Flo Air Cleaner Elements Air Filter, Triangle
    (Part #3251099)
    x
                To keep your engine running clean, replace the original filter element in your traingle Pro-Flow 1000 Series Edelbrock air cleaner with a new element every 3000 miles (sooner in dusty areas).
    • Improves Throttle Response
    • Smooth Engine Operation
    • Improved Cold Starting
    • Dyno-Tested/Street Proven
    • Powerful/Efficient Fuel Injection
    • Control Of Engine Parameters
    • Black Foam Replacement Element
  • Edelbrock 1455 Performer Series Carburetor Metering Rod, Pair
    New
    Edelbrock 1455 Performer Series Carburetor Metering Rod, Pair
    (Part #3251455)
    x
                These metering rods are designed for use with Edelbrock Performer Series and Thunder Series AVS carburetors only. Do not use with other brands. Sold in pairs.
    • Metering Rods
    • .073 in. x .042 in.
    • For Edelbrock Performer and Thunder Series AVS Carburetors Only
    • Sold As A Pair

    Installation Instructions (PDF)

  • Edelbrock 1084 High Performance Engine Oil  Zinc Additive
    New
    Edelbrock 1084 High Performance Engine Oil Zinc Additive
    (Part #3251084)
    x
                Edelbrock's High Performance Zinc Motor Oil Additive is designed for hot rods, sports cars, muscle cars and exotics. this special formula of zinc, phosphorous and moly is the ideal chemistry to add wear protection to any motor oil. Because it won't rub, scrape off or wear off, it is perfect for cold starts and infrequently driven vehicles. Also extends engine life and increases mileage and horsepower. One bottle treats up to 6 quarts/liters of oil.
    • Designed For Hot Rods/Sports Cars/Muscle Cars
    • Special Formula Of Zinc Phosphorous And Moly
    • Is Ideal Chemistry To Add Wear Protection
    • Will Not Rub/Scrape/Wear Off
    • Perfect For Cold Starts/Infrequently Driven Vehicles
    • Extends Engine Life
    • Increases Mileage And Horsepower
    • Treats Up To 6 qts. Of Conventional Oil
    • 12 bottles per case
    • 12oz. Each
  • Edelbrock 1146 1949-53 Flathead Offset Generator Bracket
    Edelbrock 1146 1949-53 Flathead Offset Generator Bracket
    (Part #3251146)
    x
                

    This bracket offsets the generator to the passenger side (RH) on '49-'53 Ford Flathead V8s. A special water neck is included that helps to re-route the hose around the relocated generator. This bracket only fits a stock Ford generator, NOT a Powegen.

    Fits most intakes.

    325-1146 Instructions (PDF)

  • Edelbrock 7820 Performer-Link True Roller Timing Set Chain, SB
    New
    Edelbrock 7820 Performer-Link True Roller Timing Set Chain, SB
    (Part #3257820)
    x
                Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch.
    • Solid Bushing Chain Resists Stretching
    • For Use with Stock or Edelbrock Camshafts
    • Stressproof Steel Crank Gears
    • 3 Keyway Setting Points To Ensure Accurate Timing
    • True Bearing Surface Rolls with the Sprockets
    • For Engine with One-Piece Fuel Pump Eccentric

    Installation Instructions (PDF)

  • Edelbrock 1115 1949-53 Ford Flathead Finned Cylinder Heads, 65cc
    Edelbrock 1115 1949-53 Ford Flathead Finned Cylinder Heads, 65cc
    (Part #3251115)
    x
                

    Extensive R&D and modern CAD systems give these heads more power potential and greater heat control than any before! Works well on stock or modified engines. For 1949-1953 Ford 8BA and 8CM Mercury V8 engines (24-stud).

    • The original Edelbrock design
    • Rugged, ribbed internally and externally with a large water capacity
    • Cast at the Edelbrock Foundry in the USA of T-6 tempered A356 aluminum
    • Excellent breathing characteristics
    • 8:1 compression with stock bore & stroke
    • C/R increase is approx 3/10 of a percent with each 1/8" stroke
    • Accepts .410" valve lift

    325-1115 Instructions (PDF)

  • Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
    Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
    (Part #3251406)
    x
                

    Edelbrock Performer Series 4 barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, this Edelbrock carb is the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    CALIBRATED FOR FUEL ECONOMY
    Designed for small-block and small displacement big-block engines, this four barrel carb is recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets Primary .098, Secondary .095; Metering Rods .075 x .047; Step-Up Spring yellow (4" Hg). Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    • Easy to tune with great driveability
    • 600 CFM
    • Electric choke
    • Ford/Mopar arms sold separately

    Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

    Edelbrock Promo - Big Carb Deal (PDF)  

  • Edelbrock 4025 Uni-Syn Carburetor Synchronizing Tool
    Edelbrock 4025 Uni-Syn Carburetor Synchronizing Tool
    (Part #3254025)
    x
                

    If you have more than one carb on your hot rod, you need one of these "Uni-Syn" carb synchronizing tools. Just set on the top of your carb and adjust until all the carbs in your tri-power three deuce set-up read the same. 

    Works well on small one barrel and two barrel carbs (downdraft or side-draft). Fits carb necks from 1-3/8" up to 3".

Filter

"Edelbrock" Page 1 of 50

Page 1 of 50

  • Edelbrock 75161 RPM Air Gap Vortec Intake Manifold, Chevy
    New
    Edelbrock 75161 RPM Air Gap Vortec Intake Manifold, Chevy
    (Part #32575161)
    x
                Based on the powerful Performer RPM Vortec number 7116, this single four-barrel intake is designed for 262-400 c.i.d. Chevy V8s with 1996 and later Vortec (L31) cast iron or the new Edelbrock E-Tec aluminum heads.
    • Polished Version
    • Polish is Hand-Buffed for Brilliant Shine
    • Based on Performer RPM-Series with Unique Air Gap
    • Air Gap Cooler and Denser Mixture for More Power
    • Designed for 1500 to 6500 RPM Street-Driven Power
    • For Engines w/GM Vortec Or Edelbrock E-Tec Heads
    • Retains Good Throttle Response and Acceleration
    • Larger Plenum and Runners Maximizes Other Upgrades

    Installation Instructions (PDF)

  • Edelbrock 76530 Flare To Pipe Hose Fitting,-4 AN to Male 1/8 Inch NPT
    New
    Edelbrock 76530 Flare To Pipe Hose Fitting,-4 AN to Male 1/8 Inch NPT
    (Part #32576530)
    x
                These flare fittings adapt -4 AN to 1/8 inch NPT with a blue anodized finish.  They are perfect for nitrous and fuel hoses in place of standard fittings.
    • Straight Fitting
    • Positive Seal At Maximum Operating Pressures
    • Anodized For Greater Corrosion Resistance
  • Edelbrock 9656 Push Rod, Hardened Steel, 7.634 Inch, Ford 351W
    New
    Edelbrock 9656 Push Rod, Hardened Steel, 7.634 Inch, Ford 351W
    (Part #3259656)
    x
                Hardened steel pushrods from Edelbrock feature steel heat-treated construction manufactured from case-hardened tubing.  They are designed for Ford 351W engines with hydraulic roller camshafts and come in sets of 16.
    • Case-Hardened Tubing
    • Surface Hardening
    • Welded Ends
    • 0.3125 in. Diameter
    • Use with or without Hardened Steel Guideplates
  • Edelbrock 73092 Stainless Steel Nitrous Oxide Carburetor Jet, 0.092in.
    New
    Edelbrock 73092 Stainless Steel Nitrous Oxide Carburetor Jet, 0.092in.
    (Part #32573092)
    x
                These nitrous jets from Edelbrock feature CNC-machined stainless steel construction that won't erode like some brass jets.  They allow for accurate power gains for use with Performer Series carburetors.
    • Precision CNC Machined Stainless Steel
    • Will Not Erode Like Brass Jets
  • Edelbrock 7381 Cylinder Head Gasket, Pontiac 389,400,421,428,455
    New
    Edelbrock 7381 Cylinder Head Gasket, Pontiac 389,400,421,428,455
    (Part #3257381)
    x
                Complete cylinder head gasket sets include all the necessary gaskets to install Edelbrock cylinder heads and camshaft.
    • Cylinder Head Gasket
    • 1961-1980 326-389-400-421-428-455
  • Edelbrock 9638 Push Rod, 6.936 Inch, Hardened Steel, Magum 5.2/5.9L
    New
    Edelbrock 9638 Push Rod, 6.936 Inch, Hardened Steel, Magum 5.2/5.9L
    (Part #3259638)
    x
                Hardened steel pushrods from Edelbrock feature steel heat-treated construction manufactured from case-hardened tubing.  They are designed for Mopar Magnum 5.2L and 5.9L engines and come in sets of 16.
    • Case-Hardened Tubing
    • Surface Hardening
    • Welded Ends
    • 0.3125 in. Diameter
    • Use with or without Hardened Steel Guideplates

    Installation Instructions (PDF)

  • Edelbrock 9764 Replacement Stainless Steel Intake Valve, 1.900 Inch
    New
    Edelbrock 9764 Replacement Stainless Steel Intake Valve, 1.900 Inch
    (Part #3259764)
    x
                1-piece, swirl-polished, hardened tip stainless steel exhaust valves with undercut stems for increased flow. Hard-chromed valve stems are 11/32in. except where noted
    • Swirl-Polished
    • Hardened Tip Stainless Steel Valves
    • 0.34375 in. Undercut Stems
    • Increased Flow
  • Edelbrock 75301 RPM Air Gap AMC Intake Manifold, AMC 290/343/390
    New
    Edelbrock 75301 RPM Air Gap AMC Intake Manifold, AMC 290/343/390
    (Part #32575301)
    x
                Designed for 1970-91 304-401 c.i.d. and 1967-69 290-390 c.i.d. V8s, RPM Air-Gaps incorporate the same race-winning technology as our Victor Series competition intakes.
    • Polished Performer RPM-Series with Unique Air Gap
    • Air Gap Cooler and Denser Mixture for More Power
    • Designed for 1500 to 6500 RPM Street-Driven Power
    • Dual-Plane High-Rise Intake w/180 deg Firing Order
    • Produces Incredible Top-End Horsepower
    • Retains Good Throttle Response and Acceleration
    • Includes Std Oil Fill ; PCV ; A/C Accy Bosses
    • Not for Exhaust-Heat Chokes - No Exhaust Crossover

    Installation Instructions (PDF)

  • Edelbrock 73800 Nitrous System Fuel Pressure Gauge, 0-1,400 psi
    New
    Edelbrock 73800 Nitrous System Fuel Pressure Gauge, 0-1,400 psi
    (Part #32573800)
    x
                Pressure gauges are an important element in getting maximum performance and consistency from your nitrous system. The 1-1/2in. nitrous gauges may be fitted onto a nitrous bottle or just in front of the nitrous solenoid. Braided stainless steel lines are required for all remote mounted nitrous gauges. 2-5/8in. gauges are illuminated and come with fittings.
    • Maximum Performance And Consistency
    • May Be Fitted Onto A Nitrous Bottle
    • May Be Fitted Just In Front Of Nitrous Solenoid
  • Edelbrock 76525 Flare Fitting Adapter, Straight, -3AN x 5/16-24 Stainless
    New
    Edelbrock 76525 Flare Fitting Adapter, Straight, -3AN x 5/16-24 Stainless
    (Part #32576525)
    x
                These flare fittings adapt -3 AN to 5/16 inch -24 with a stainless finish.  They are perfect for nitrous and fuel hoses in place of standard fittings.
    • Flare To Pipe Fitting
    • Positive Seal At Maximum Operating Pressures
    • Anodized For Greater Corrosion Resistance
  • Edelbrock 7569 Valve Cover Gasket Set, Ford 351C,351M,400M
    New
    Edelbrock 7569 Valve Cover Gasket Set, Ford 351C,351M,400M
    (Part #3257569)
    x
                Fabricated from performance CRC (core-reinforced-composite), Edelbrock Valve Cover Gaskets provide excellent sealing integrity and conformability for easy installation.
    • Valve Cover Gasket
    • Composite with Steel Core
    • Ford 351C, 351M, 400M
    • Pair
  • Edelbrock 8897 Water Pump Cartridge Water Pump
    New
    Edelbrock 8897 Water Pump Cartridge Water Pump
    (Part #3258897)
    x
                These water pump cartridges are replacement for Edelbrock Victor GM LS Series mechanical water pumps.  They feature maximum cooling capability for a variety of applications.
    • Replacement Cartridge For 2 Piece GM Pump
    • For Edelbrock PN[8896]/GM Gen III/GM Gen IV LS Water Pump

    Installation Instructions (PDF)

  • Edelbrock 79259 E-CNC 185 Cylinder Head
    $1,149.99
    $1,567.95
    New
    Edelbrock 79259 E-CNC 185 Cylinder Head
    (Part #32579259)
    x
                The E-CNC 185 cylinder heads for small-block Ford are an all new design that is CNC ported to achieve optimal air-flow for maximum horsepower and torque in high performance street and light duty racing applications. The casting and port designs are all new and engineered for great performance. All E-CNC heads feature 2.02in. intake and 1.57in. exhaust 8mm stem valves and are equipped with conical valve springs and titanium retainers for lightweight and durable valve train combo. These small-block Ford heads have an aggressive 18 degree valve angle for maximum performance and accept common intake manifolds such as Edelbrock Performer RPM and RPM II.
    • CNC Ported To Achieve Optimal Air Flow
    • For Maximum Horsepower And Torque
    • For High Performance Street/Light Duty Racing
    • 18 Deg. Valve Angle For Maximum Performance
    • Accepts Common Manifolds
    • Made In U.S.A.

    Installation Instructions (PDF)

  • Edelbrock 8125 Fuel Line kit, Fuel Pump to Filter, Braided Flex Line
    New
    Edelbrock 8125 Fuel Line kit, Fuel Pump to Filter, Braided Flex Line
    (Part #3258125)
    x
                These high-quality fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with a 3/8in. NPT outlet, when using an Edelbrock Single- or Dual-Feed fuel inlet kit number 8128, number 8131, number 8133 or number 8134.
    • For Performer Series Carburetors
    • Pre-fitted Stainless Lines
    • Connects From Filter to Pump

    Installation Instructions (PDF)

  • Edelbrock 74010 Stainless Steel Funnel Nitrous Oxide Jet, 0.010 Inch
    New
    Edelbrock 74010 Stainless Steel Funnel Nitrous Oxide Jet, 0.010 Inch
    (Part #32574010)
    x
                Designed for use with 1/8in. tubing, Edelbrock funnel jets are available for small nitrous systems such as those used on motorcycles, snowmobiles, etc.
    • CNC Machined Stainless Steel
    • Will Not Erode Like Brass Jets
    • Maintain Precision Dimensions
  • Edelbrock 7830 Performer-Link True Roller Timing Set Chain, Ford
    New
    Edelbrock 7830 Performer-Link True Roller Timing Set Chain, Ford
    (Part #3257830)
    x
                Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch.
    • Solid Bushing Chain Resists Stretching
    • For Use with Stock or Edelbrock Camshafts
    • Stressproof Steel Crank Gears
    • 3 Keyway Setting Points To Ensure Accurate Timing
    • True Bearing Surface Rolls with the Sprockets

    Installation Instructions (PDF)

  • Edelbrock 76550 Pipe Plug Fitting, 1/8 Inch NPT, Aluminum, Black Anodized
    New
    Edelbrock 76550 Pipe Plug Fitting, 1/8 Inch NPT, Aluminum, Black Anodized
    (Part #32576550)
    x
                These allen pipe plugs from Edelbrock feature 1/8 inch NPT threads and come with a black anodized finish.
    • Positive Seal At Maximum Operating Pressures
    • Anodized For Greater Corrosion Resistance
  • Edelbrock 8862 Victor Series Water Pump 1971-74 B/B Chevy, Short Polished
    New
    Edelbrock 8862 Victor Series Water Pump 1971-74 B/B Chevy, Short Polished
    (Part #3258862)
    x
                Edelbrock Victor Series water pumps provide maximum cooling for the street and the race track. They're ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes.
    • Maximum Cooling for Street and Racing Engines
    • Internal Passages Are Balanced for Maximum Flow
    • Impeller is Larger than Others For Max Pressure
    • Impeller Vanes Dramatically Increase Flow Rates
    • Equal Distribution to Both Sides of Block
    • Only Flows in One-Direction for Optimum Efficiency

    Installation Instructions (PDF)

  • Edelbrock 97384 Rollin Thunder Hydraulic Roller Lifter Set, 5.0/5.7L
    New
    Edelbrock 97384 Rollin Thunder Hydraulic Roller Lifter Set, 5.0/5.7L
    (Part #32597384)
    x
                Precision self-aligning hydraulic roller lifter. O.E. style hydraulic roller lifter. 1987 and later engines originally equipment with roller cam. Complete set: 87 and later Chevy small block originally equipped with hydraulic lifters.
    • Precision Self-Aligning Hydraulic Roller Lifter
    • O.E. Style Hydraulic Roller Lifter
    • 1987-Later Engines Originally Equip. w/Roller Cam

    Installation Instructions (PDF)

  • Edelbrock 8861 Victor Series Water Pump, Big Block Chevy, Long
    New
    Edelbrock 8861 Victor Series Water Pump, Big Block Chevy, Long
    (Part #3258861)
    x
                Edelbrock Victor Series water pumps provide maximum cooling for the street and the race track. They're ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes.
    • Maximum Cooling for Street and Racing Engines
    • Internal Passages Are Balanced for Maximum Flow
    • Impeller is Larger than Others For Max Pressure
    • Impeller Vanes Dramatically Increase Flow Rates
    • Equal Distribution to Both Sides of Block
    • Only Flows in One-Direction for Optimum Efficiency

    Installation Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 50