Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Eagle-Motorsports At Speedway Motors

It goes without saying that the sprint car industry is constantly evolving and ever-changing. Customers often measure a company in two different ways. The first is by the products that are offered, and the second is by the service. Eagle Motorsports has excelled at both since the beginning. At Eagle, the goal is to exceed the customers expectations with emphasis on QUALITY. Product research and development focused on your current and future requirements will continue to position Eagle Motorsports at the forefront of the sprint car industry.

"Eagle Motorsports Open Wheel" Page 1 of 4

  • Eagle Micro Nose, Raised Center
    Eagle Micro Nose, Raised Center
    (Part #9601519)
    x
                
            
  • Eagle Black Series Front Torsion Arms
    Eagle Black Series Front Torsion Arms
    (Part #94037004)
    x
                

    Eagle Motorsports factory-built components. Choose either LF or RF. 

     

    • Triangulated pockets for superior strength
    • Two-tone black anodize finish
    • Radiused edges for low drag contact area 
    • Pinch bolt included

     

  • Eagle Motorsports MW-NWS-1125MS 3 Hole Adjustable Nose Wing Strap
    Eagle Motorsports MW-NWS-1125MS 3 Hole Adjustable Nose Wing Strap
    (Part #9601125)
    x
                
    • Durable 304 stainless steel construction
    • Offset fits any chassis
  • Low Friction 28mm Double Row Birdcage Bearing
    Low Friction 28mm Double Row Birdcage Bearing
    (Part #94059142)
    x
                

    These low friction 28mm Bird Cage bearings are 1.1" wide with a  3.940" OD.

    • Low friction 28mm double row
    • 1.1" wide, 3.940"outside diameter
    • Fits many different bird cages
  • Racing Rearend Tether Tab
    Racing Rearend Tether Tab
    (Part #91637103)
    x
                

    These weld-on tether tabs are a special bracket designed to hold the rear end tether in place.  They safely secure the tether to hold the rearend from sliding back out of the torque tube in the event of an accident.

    • Bracket to hold rear end tether in place
    • Welds on
    • Oval track racing applications
  • 3-Piece Side Panel - LH, Raised Rail
    3-Piece Side Panel - LH, Raised Rail
    (Part #9405613)
    x
                

    Eagle Motorsports/Schnee Chassis factory-built component. Access your fuel system with ease using these inter-locking panels. 1/4-turn fasten together design allows quick entry to the cockpit without fighting the header.

    • Aluminum, plain finish
    • Works for new Eagle Motorsports/Schnee Chassis
    • 38" for raised rail car
    • Pre-cut holes for spuds
  • Eagle Motorsports RH Sprint Car Safety Armguard Panel
    Eagle Motorsports RH Sprint Car Safety Armguard Panel
    (Part #9405608)
    x
                Eagle Motorsports factory-built component. This right-side arm guard is constructed from  high-density fiberglass to withstand abuse from dirt, mud and rocks. Large size with extra material makes it easy to mate with any chassis configuration. 
    • Fits any RH safety bar
    • Mates to RH sail panel
    • No interference with full containment seats
    • Fiberglass construction, gel coat finish
    • Choose from black or white finish

     

  • Eagle Motorsports #2 Sprint Car LH Safety Armguard
    Eagle Motorsports #2 Sprint Car LH Safety Armguard
    (Part #9403825)
    x
                
    Eagle Motorsports factory-built component. 
    • Fits 2012 and previous raked cage cars
    • 2" raised cage in rear only
    • Fiberglass construction, gel coat finish 
  • Eagle Motorsports Standard Short Rear Motorplate
    Eagle Motorsports Standard Short Rear Motorplate
    (Part #94037016)
    x
                

    Eagle Motorsports factory-built component. This standard short aluminum rear motorplate is relieved for the dash and allow for brake line pass-through. It is an easy way to add weight to a car to conform to weight rules.

    • Easy way to add weight to a car to conform to weight rules
    • Laser cut 3/8" aluminum
    • Pre drilled and tapped for S/B Chevy
    • Mates with all Chevy blocks, pump combinations and ball housings
    • Two-tone black anodize finish 
  • Eagle Motorsports Midget LH Lower Steering Arm
    Eagle Motorsports Midget LH Lower Steering Arm
    (Part #9501402)
    x
                

    These Midget Sprint LH steering arms from Eagle Motorsports are precision CNC machined from billet 2024-T6 aluminum.  They feature fully radiused edges and lightening pockets to ensure minimum weight.

    • Eagle factory-built component
    • Fully radiused edges
    • Black anodize finish
    • 7/16" mount
  • Eagle Micro Sprint 1 Piece Hood
    Eagle Micro Sprint 1 Piece Hood
    (Part #9601515)
    x
                
    • Sleek 1 piece design
    • Fits multiple applications
    • Fiberglass construction
  • Eagle Motorsports Top Wing Spud
    Eagle Motorsports Top Wing Spud
    (Part #940133)
    x
                

    Eagle Motorsports factory-built component. 

    • Fabricated, chromoly tubing
    • Direct replacement for Eagle Motorsports chassis top wing spud 

    Eagle Motorsports Chassis Repair Guide

  • 3 Piece Side Panel - LH, Raised Rail
    3 Piece Side Panel - LH, Raised Rail
    (Part #9405657)
    x
                Eagle Motorsports/Schnee Chassis factory-built component. Access your fuel system with ease using these inter-locking panels. 1/4-turn fasten together design allows quick entry to the cockpit without fighting the  header.
    • Allows for easy access of the fuel system
    • Interior locking panels
    • For raised rail cars
    • Material Thickness: .60"
    • Aluminum, plain finish 
    • Fits on new Eagle Motorsports/Schnee Chassis cars
  • Eagle Motorsports Mini Sprint 2 Inch Axle Rotor Hub
    Eagle Motorsports Mini Sprint 2 Inch Axle Rotor Hub
    (Part #9601701)
    x
                
    Eagle Motorsports factory-built component. 
    • Works for mini sprints
    • Reinforced spoke design
    • Rotating weight reduction
  • Eagle Motorsports Titanium Left Rear Shock Adjuster
    Eagle Motorsports Titanium Left Rear Shock Adjuster
    (Part #9453763)
    x
                

    Fine tune the height of your left rear shock with these adjuster shafts.  They are specially designed to fit Eagle sprint cars only. 

    • Left rear shock 
    • Used to adjust shock to desired height
    • For Eagle cars only
    • Titanium construction
  • Eagle Motorsports Steel Rear Motorplate
    Eagle Motorsports Steel Rear Motorplate
    (Part #94037021)
    x
                
    Eagle Motorsports factory-built component. 
    • Easy way to add weight to a car to conform to weight rules
    • Laser cut 3/8" steel
    • Pre-drilled and tapped for S/B Chevy
    • Integrated dirt shield for pump
    • Recess for dash or cowl
    • Mates with all Chevy blocks, pump combinations and ball housings
  • Eagle Motorsports Micro Sprint 3 Hole Jacobs Ladder
    Eagle Motorsports Micro Sprint 3 Hole Jacobs Ladder
    (Part #9601983)
    x
                
    Eagle Motorsports factory-built component. 
    • Asymmetrical design allows for multiple adjustments
    • Fabricated in the USA
    • Tubular steel construction
    • 11.562"
    • 1/2" adjustments
    • No straps (960-1595) included
  • Eagle Micro Sprint RH Armguard
    $124.99
    Eagle Micro Sprint RH Armguard
    (Part #9601521)
    x
                
    • Fiberglass construction
    • Provides additional arm room
    • Full cockpit enclosure
    • Contoured to hug tubes
  • Eagle Motorsports Sprint Car Billet Brake Pedal
    Eagle Motorsports Sprint Car Billet Brake Pedal
    (Part #9403013007)
    x
                Eagle Motorsports factory-built component. Strong, lightweight billet brake pedal for Eagle Motorsports standard and raised-rail  sprint car chassis. 
    • Now available in black anodize
    • Rigid design eliminates deflection
    • Anti-slip knurled foot rest
  • 3 Piece Side Panel - LH, Standard
    3 Piece Side Panel - LH, Standard
    (Part #9405614)
    x
                

    Eagle Motorsports/Schnee Chassis factory-built component. Access your fuel system with ease using these inter-locking panels. 1/4-turn fasten together design allows quick entry to the cockpit without fighting the header. 

    • Aluminum, plain finish
    • Works for new Eagle Motorsports/Schnee Chassis
    • 38" for raised rail car
    • Pre-cut holes for spuds 

     

  • Eagle Micro Sprint LH Armguard
    Eagle Micro Sprint LH Armguard
    (Part #9601520)
    x
                
    • Full cockpit enclosure
    • Contoured to hug tubes
    • Fiberglass construction
  • Eagle Motorsports In-Rail Sprint Car Hood
    Eagle Motorsports In-Rail Sprint Car Hood
    (Part #9405602)
    x
                Eagle Motorsports factory-built component. These fiberglass sprint car hoods from Eagle Motorsports feature a sleek aero-inspired two piece design and they provide adequate clearance for any oil tank, radiator or air box. These hoods fit between the rails.
    • Sleek aero-inspired two piece design
    • Provides adequate clearance for any oil tank, radiator or air box
    • Seals engine compartment from debris
    • Fiberglass construction, gel coat finish
    • Saldana style
    • Choose from black or white finish
    • Works with in-rail nose (940-5605) and cowl (940-5609)
  • Eagle Motorsports Sprint Car LF Combo Steering Arm
    Eagle Motorsports Sprint Car LF Combo Steering Arm
    (Part #94037014)
    x
                
    Eagle Motorsports factory-built component. 
    • Two tone black anodize finish
    • 3.25" bolt spacing
    • Upgraded profile
    • Optimized steering points
  • Eagle Motorsports Shock Spacer Sleeve
    Eagle Motorsports Shock Spacer Sleeve
    (Part #94037030)
    x
                Eagle Motorsports factory-built component. Aluminum spacer allows for full mobility of the front shock and works with any flat surface to provide 1" extra clearance.
    • Standoff for front shock tower
    • Allows full mobility of shock
    • Mates to any flat surface
    • Overall Lenght: .96"
    • Overall Diameter: 1.00"
    • Aluminum
    • Natural finish
    • Works perfect with Eagle aero shock towers (940-3762-SIDE)
  • Eagle Motorsports RH Steering Gear Mount
    Eagle Motorsports RH Steering Gear Mount
    (Part #940139)
    x
                This RH steering mount is made as a factory chassis  component  from Eagle Motorsports.  They are a direct replacement for brand chassis. 
    • Weld-on
    • Steel construction
    • Eagle Motorsports factory chassis component
    • Direct replacement for factory RH steering ring

    Eagle Motorsports Chassis Repair Guide

  • Steel Weld Boss, 7/16 Inch-20 Threaded
    New
    Steel Weld Boss, 7/16 Inch-20 Threaded
    (Part #91637107)
    x
                

    This steel weld boss is constructed of heavy duty steel material and features threaded ends for easy assembly with our heim joints. This weld boss welds on to your Sprint or Open Wheel Chassis.

    • 7/16-20 threaded steel weld boss for 3/4" x .049 wall tubing
    • RH Male Threads
    • Overall Length: 1.50"
    • Diameter Big End: .75"
    • Diameter Small End: .63"
  • Eagle Motorsports Right Rear Sprint Car Sail Panel
    Eagle Motorsports Right Rear Sprint Car Sail Panel
    (Part #9405606)
    x
                Eagle Motorsports factory-built component. These RH side sail panels feature rolled edges that wrap  neatly around chassis uprights. Fiberglass  construction is smooth  and durable. Available in white or black.
    • Fits 2013 style Eagle Motorsports chassis
    • Works with safety bar kits
    • Hugs tube edge
    • Fiberglass construction, gel coat finish
  • Eagle Micro Sprint Torsion Stop
    Eagle Micro Sprint Torsion Stop
    (Part #9609012)
    x
                
    • Billet aluminum construction
    • All black finish
    • For 7/8" diameter bars and 1 1/2" tube split
    • 3/4" thick, includes hardware
  • Eagle Motorsports Sprint Car #3 LH Safety Armguard
    Eagle Motorsports Sprint Car #3 LH Safety Armguard
    (Part #9403826)
    x
                
    Eagle Motorsports factory-built component. 
    • Fits 2012 and previous 2" taller cars
    • Fiberglass construction, gel coat finish
    • Available in white or black
  • Eagle Motorsports Over Tube Nose
    Eagle Motorsports Over Tube Nose
    (Part #9403812)
    x
                
    Eagle Motorsports factory-built component. 
    • Mates to any new model hood
    • Able to be trimmed for any wheel base or shock configuration
    • Polished finish
    • Available in black or white
    • Works perfectly with over the tube hood (940-3811)
  • Inboard Brake Pad Shims for Ultra Lite/Red Devil Caliper
    Inboard Brake Pad Shims for Ultra Lite/Red Devil Caliper
    (Part #9105657)
    x
                

    These inboard brake pad shims will allow you to achieve accurate spacing between your caliper and the brake pad. They are made of steel and feature a special silenced coating to eliminate any noise problems.

    • Place plates between the caliper piston and the pad
    • Allows the piston to stay more firmly seated while using the remainder of the pad surface
    • Fits Ultra Lite/Red Devil calipers
    • Choose .063" or .120" thickness
  • Eagle Micro Sprint Car Nose Panel, Smooth Center
    Eagle Micro Sprint Car Nose Panel, Smooth Center
    (Part #9601518)
    x
                These micro sprint car nose panels from Eagle Motorsports feature a smooth center while increasing air flow with its unique scoop design.  These panels look and fit great on your micro sprint chassis. 
    • Scoop like shape directs air flow
    • Smooth contours hug chassis
    • Fiberglass construction
    • Choose from black or white finish
  • 2 Piece Motor Panel - LH Standard
    2 Piece Motor Panel - LH Standard
    (Part #9405610)
    x
                Eagle Motorsports/Schnee Chassis factory-built component. This standard panel is made from durable aluminum and is intended to  protect engine from debris and damage.  Its two-piece  design overlaps for a seamless look and allows for easy access  when you need it. Pre cut for spuds. Plain finish. Works with new Eagle Motorsports/Schnee Chassis. 
            
  • Eagle Motorsports Sprint Car Straight Pitman Arm
    Eagle Motorsports Sprint Car Straight Pitman Arm
    (Part #94037019)
    x
                
    Eagle Motorsports factory-built component.
    • Two attachment points for quick adjustments
    • Tapered design to maximize spline engagement
    • Increased gear mating surface
    • Integrated rod end spacers
    • Pocketed for superior strength and weight savings
    • Two tone black anodize finish
    • Machined from bar stock, taper milled to a 3/4" end
    • Includes pinch bolt
    • 9-3/4" & 10-3/4" centerline to centerline rod end holes
  • 3 Piece Side Panel - LH Standard
    3 Piece Side Panel - LH Standard
    (Part #9405658)
    x
                Eagle Motorsports/Schnee Chassis factory-built components. Access your fuel system with ease using these inter-locking panels. 1/4-turn fasten together design allows quick entry to the cockpit without fighting the   header.
    • Allows for easy access of the fuel system
    • Interior locking panels
    • For standard rail cars
    • 40" long
    • Material Thickness: .60"
    • Aluminum, plain finish
    • Works with new Eagle Motorsports/Schnee Chassis cars
  • Eagle Motorsports Midget Hood
    $199.99
    Eagle Motorsports Midget Hood
    (Part #9502020)
    x
                
    Eagle Motorsports factory-built component. 
    • Clearance for any engine
    • Wide scoop induction
    • Mates to any cowl
    • Fiberglass construction, white or black gel coat finish

Goto Previous PagePrevious Page
1 2 3 4