Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck At Speedway Motors

Speedway Motors is the source for all your classic pickup truck parts. No matter whether you're wrenching on a half ton Ford F100, Chevy 3100, or Chevy C10, we can help you build the truck of your dreams. Also, for those of you who drive Chevy S10 or diesel trucks, Speedway Motors has your lowering kits, drop spindles, V8 swap kits, tuners, modules, and cat-back exhaust systems too.

Featured Products
Speedway Economy 12 Circuit Wiring Harness
Speedway Economy 12 Circuit Wiring Harness
x
            

This harness was designed to offer you all the highest quality components in a package designed for cars with minimum accessories. Each wire is color coded and labeled every few inches.

Our prewired 12 circuit kit will fit all your basic needs and makes wiring a painless process. It is designed especially for the street rod without accessories. It also includes horn relay and connector, turn and hazard signals, dimmer switch connector, circuit breaker for headlights, two flashers, one alternator plug, two ignition switch connectors, plus more.

  • Mainfuse box base is 1-7/8" x 3-11/16"
  • Box height is 3-3/4"
12 Circuit Wiring Harness Installation Instructions (PDF)
Speedway Chevy Universal Aluminum Radiators
Speedway Chevy Universal Aluminum Radiators
x
            

Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

  • All-aluminum, furnace-brazed construction
  • No cheap epoxy glue or crimped in gaskets
  • Maximum amount of fins per inch allows greater heat transfer
  • Billet filler necks
  • Available in 22", 24", 28", or 31" widths (measurements include tanks)

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

Ford 9 Inch Posi Traction Third Member Assembly
Ford 9 Inch Posi Traction Third Member Assembly
x
            

Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!

These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.

 

Currie Differential Tech Bulletin (PDF)

 

910-48345 Instructions (PDF)

Mustang II Power and Manual Rack & Pinions
Mustang II Power and Manual Rack & Pinions
x
            

Product update: The rebuilt power rack # 910-34340-POW as described here and in our previous catalogs has been phased out and replaced with a new rack # 910-35341

Fits aftermarket Mustang II crossmembers. Available in manual or power steering. Mount bushings are included with the Power version, but mount bushings are NOT included in the Manual version.

MANUAL: New manual rack and pinion steering assembly for Pinto/Bobcat/Mustang II based front suspensions in street rods and kit cars. 9/16"-26 spline input shaft. 16" mount centers. 

POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

91034340 CPP Instructions (PDF)  

Speedys 9 Super 7    Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
Speedys 9 Super 7 Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
x
            

Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

There have been numerous attempts to reproduce this unit, with little success. "Speedy" Bill Smith of Speedway Motors in Lincoln, Nebraska, took on the challenge to make a great product even better. The 9 Super 7 ® Carb brings this reproduction of the original Stromberg 97 2 barrel carb into the 21st Century!

Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the choke assembly, accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result! 

Aesthetically, the 9Super7 is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

The other similarity that the 9 Super 7 shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Be sure to include the Secondary 9 Super 7 when installing multi-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

On the primary 9 super 7 carb the throttle shaft extends from carb body .983" and has the hole on the end to pin the linkage. There is a brass sleeve that the throttle shaft rotates in that extends from the carb body .400 and this leaves the useable throttle shaft length of .583. There is sufficient room for progressive linkage and the manual throttle linkage that rotates over the sleeve.

  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Features original Stromberg 0.97" venturi diameter
  • Modern Nitrophyl float and Neoprene gaskets
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
  • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
  • Extended brass throttle shaft to simplify multi-carb linkage

915-11655 9 Super 7® Carb Instructions (PDF)

Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
x
            

These classic "Rams Horn" style exhaust manifolds are great for use with most small block Chevy applications, providing optimal clearance for angle plug heads.  These manifold kits come complete with all mounting hardware and gaskets.

  • Ground smooth with no external bosses or brackets
  • 2-1/2" outlet
  • Plain, Raw finish
  • Nodular cast iron
  • For angle or straight plug heads
  • Includes all hardware and gaskets
Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Silver
Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Silver
x
            

These classic "Rams Horn" style exhaust manifolds are great for use with most small block Chevy applications, providing optimal clearance for angle plug heads.  These manifold kits come complete with all mounting hardware and gaskets.

  • Ground smooth with no external bosses or brackets
  • 2-1/2" outlet
  • Silver ceramic finish
  • Nodular cast iron
  • For angle or straight plug heads
  • Includes all hardware and gaskets

"Classic Truck" Page 1 of 25

  • Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    x
                

    These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face.  The fuel sender comes with seal and and all mounting hardware.

    • 2-1/16”
    • Overall Diameter: 2.25"
    • Overall Length: 9.25"
    • Includes sender
    • 240 ohms empty, 33 ohms full
    • Stainless steel bezel
    • Backlit white face
    • Replacement light socket assembly available # 910-65071

    Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.

  • Auto Meter 201009 Cobra Voltmeter Gauge, Short Sweep Electric, 2 Inch
    Auto Meter 201009 Cobra Voltmeter Gauge, Short Sweep Electric, 2 Inch
    x
                

    This vintage instrument series is designed to accurately re-create the period correct details of the instruments used in the original Cobra Roadster while incorporating the latest technology advancements in performance gauges from Auto Meter. These black dial face instruments feature incandescent through the dial backlighting with white pointers, traditional numbers and tick marks, and are finished with flat glass and scalloped chrome bezels.

    • Short Sweep Electric Voltmeter
    • 8-18 V
    • Mounts in 2-1/16" Hole
    • Includes mounting hardware and Incandescent Backlighting
    • Requires 18 gauge electrical wire and ring or spade terminal connections for installation (not included)
  • Pinstriped iPhone Cover - Gold
    Pinstriped iPhone Cover - Gold
    x
                Let us help you hot rod your iPhone 4.  These slick covers help to protect and customize your smart phone.
    • iPhone 4/4S only
    • Rugged aluminum back plate
    • Slimline rubber edging
  • Lokar SG-6009 Chrome Dimmer Switch Cover, Chevy/Ford
    Lokar SG-6009 Chrome Dimmer Switch Cover, Chevy/Ford
    x
                Brighten up that old dimmer switch with one of these new dimmer switch covers from Lokar!  Made from steel and feature a beautiful chrome finish and a textured rubber pad. 
            
  • Lokar XSRK-4001 Black Stainless Steel Carburetor Bracket
    Lokar XSRK-4001 Black Stainless Steel Carburetor Bracket
    x
                

    Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads.  Design provides improved clearance on Edelbrock carbs. Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.

    • Mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads
    • Stainless steel
    • Improved clearance on Edelbrock carbs
    • Includes tension screw to prevent bracket movement under extreme pressure

    49104001 Installation Instructions (PDF) 

  • Intercomp Digital Pressure Tester
    Intercomp Digital Pressure Tester
    x
                

    This new pressure setting tool from Intercomp can be used for several jobs. This gauge will work from 0 to 150 psi. in 1/10th of a pound.

    Digital Pressure Tester

    • Large 1/2" back lite display.
    • Gauge features 1/10th of 1% accuracy.

    Setting Mid and High Speed bypasses
    1. Will work to set a high speed up to 150psi.
    2. Comes with a -6 AN female adapter to screw your high speed into

    Setting Tire bleeders

    1. Will work from 0 PSI up. With 1/10th of a pound increments.
    2. Comes with a female quick release fitting that fit the popular Kwick change bleeders.

  • Classic Instruments Speedometer Gauge Set, V8 Speedster Face
    Classic Instruments Speedometer Gauge Set, V8 Speedster Face
    x
                

    Tom Gale, formerly Chief Designer of the Daimler Chrysler Corporation, has led the Classic Instruments design team in the production of a beautiful new series. Designed with unique dial faces that are spun and engine turned aluminum. The pointers for this series is a new design and each pointer is chrome painted. The face has a chrome V8 emblem signifying American Hot Rod Heritage. The light diffusers have laser etched indices lining up with the indices on the gauge faces.

    The V8 Red Steelie series features a vivid red background with spun aluminum numbers and accent graphics that brightly bounce off the red background. The series also features the uniquely designed pointer for the V8 line which is chrome plated and balanced for precision accuracy. Additional details within the instruments are laser etched markings on the light diffuser ring which add a level of dimension and functionality. The etching corresponds with the indices on the face and flow into a polished stainless high step bezel that is crimped around a optic grade curved lens to complete the overall design.

    • Black "V8 Speedster" face design or Red "V8 Red Steelie" face design
    • Kit includes 3-3/8" Speedo & Tach, 2-1/8" Fuel, Oil, Temp, Volts
    • Standard GM sender pack included

    Classic Instruments Installation Manual (PDF)

  • Waterman 935566D Dash Mount Fuel Shut Off Valve, -6 AN
    Waterman 935566D Dash Mount Fuel Shut Off Valve, -6 AN
    x
                Dash mount is AN6 male with offset style handle. Fuel cell ball valve   mounts in plate. Required for many  Sprint cars. They are designed to be  plumbed inline and mount close to the driver.
    • Engineered specifically for sprint car applications
    • -6 AN male to male fuel shut off valve
    • Designed to be plumbed inline and mount close to the driver
  • Titan Tools 51503 Mini Tubing Bender
    $14.99
    $19.97
    Product Rating: 4.50 Stars
    Titan Tools 51503 Mini Tubing Bender
    x
                
    • Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
    • Use with Brass, Copper, Steel, or Aluminum
    • Compact for limited accessibility applications
  • Lokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inch
    Lokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inch
    x
                Lokar Hi-Tech Throttle Cable features a stainless   steel braided  housing.  They are designed with a specially extruded liner for extended    life of the cable – not to be confused with ordinary braided brake    hose.  Cables are equipped with aluminum fittings and aluminum ferrules    to eliminate fraying.
    Kits come complete with installation instructions.
  • RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    x
                These airline kits work great for your workshop with  applications from  automotive to woodworking. This is a complete  compressed air  distribution system that is designed to easily install within new walls  or on wall surfaces of existing  workshops/garages.  These kits allow  you to put air lines exactly where  you want them, just like electrical  outlets.   No more dragging hoses  across the shop to your work area.    No special tools required, simply push the flexible tubing into the  fittings and put up your system in an afternoon.
    • 1/2" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Kit Includes:  

    • 100 ft. of 1/2" ID Tubing
    • 3 Outlets
    • 1 Manifold
    • 5 Elbows
    • 1 Tee
    • Tools     (air chuck & filter regulator sold separately)

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

  • OTB Gear 4461 Orbit Style Air Cleaner, Offset Base, Polished
    OTB Gear 4461 Orbit Style Air Cleaner, Offset Base, Polished
    x
                
    The inspiration for "Orbit" came from the the '30's - '40's Ford horn button design. But repeating rings were a very popular design theme by a number of auto builders. Got twin 4's with real tight spacing? The selection of air cleaners for you has been pretty slim, right? Many manifolds out there position the carbs with only 6-7/16" center to center. This variation features a 1/4" offset base to deal with this problem - a simple solution to an old issue. If spacing this tight isn't your problem, we have a straight base also. If running twin carbs, check your center to center spacing. We use our Platinum Series air filter with A-356 aircraft grade castings for a show quality product. The filter media is a medium gray, washable oiled cloth. Prefer to have an unpolished finish? You can have that too. Hardware furnished includes a polished stainless socket drive top screw. Diameter 6-3/4" - Height 4-1/2". Fits carbs with the typical 5" base.
    • Washable Filter Media
    • Polished
    • 1/4" Offset base plate
    • Fits carbs with standard 5-1/8" neck
    • Diameter 6-3/4"
    • Height 4-1/2"
    • Hardware furnished includes a polished stainless socket drive top screw
    • Priced and sold as single assembly - purchase 2 for a twin carb application
  • 3/8 X 3/8 Clevis
    $7.99
    3/8 X 3/8 Clevis
    x
                The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115). 
            
  • Book/Manual - How To Swap GM LS-Series Engines Into Almost Anything
    Book/Manual - How To Swap GM LS-Series Engines Into Almost Anything
    x
                How to Swap GM LS-Series Engines into Almost  Anything shows how to fit these powerhouse engines into popular GM  F-Body cars, such as the Camaro and Firebird, and also how to install  these powerplants into non-GM muscle cars, sports cars, trucks, and of  course, hot rods. This book includes a historical review, complete  specs, and detailed information so you can select and fit the best LS  engine for a particular vehicle and application.

    A section on mounting kits, explaining how to install these engines into a variety of cars using readily available motor mount kits, universal engine mounts, or fabricated mounts. In addition, the book shows you how to perform necessary oil-pan modifications and adapt accessory drivers as well as choose the most suitable fuel pump, exhaust system, wiring harness, and electronic control module. This guide takes it a step further, revealing how to select the best reprogramming equipment and software for a vehicle and its application. Finally, the book covers the range of compatible transmissions for LS engines.
    • By Jefferson Bryant
    • 144 pages
    • Photos: 375 color
    • Paperback
    • Sold individually
  • Lokar 1210144 Anchor-Tight Locking Trans Dipstick, Powerglide, Brite
    Lokar 1210144 Anchor-Tight Locking Trans Dipstick, Powerglide, Brite
    x
                

    You have flexibility with Lokar's teflon-lined braided stainless transmission dipstick. Kit comes complete with braided stainless outer housing and heat resistant E-Z to read flexible inner dipstick measuring cable. Billet aluminum handle and billet aluminum fittings complement Lokar's flexible dipsticks.

    NHRA accepted for use in all categories of competition!

    • No filler tube needed
    • Locking mechanism eliminates expulsion of dipstick handle under trans pressure
    • Bolted in sealed pan fitting
    • Large filler tube accepts standard transmission funnels
    • Made from 6061-T6 aluminum
    • Teflon-lined stainless braided outer housing
    • Flexible inner dipstick measuring cable
    • No pan fitting leaks during storage
    • Dipsticks available with firewall mounting bracket
    • Supplied with transmission storage plug for quick change & storage
    • Spare trans fittings available for quick transmission changes
    • Available for GM Powerglide transmissions
    • Available in brite anodized finish

    Application Chart for Locking Flexible Transmission Dipsticks (Link)

    4911210144 Installation Instructions (PDF) 

  • RapidAir M6030 100 FT Maxline Nylon Air Hose Tubing, 3/4 Inch Diameter
    RapidAir M6030 100 FT Maxline Nylon Air Hose Tubing, 3/4 Inch Diameter
    x
                These airline kits work great for your workshop with  applications from    automotive to woodworking. This is just the airline for your   compressed air   distribution system that is designed to easily install  within new walls   or on wall surfaces of existing  workshops/garages.   You can put these air lines exactly where  you want them, just like  electrical   outlets.   No more dragging hoses  across the shop to your  work area.     No special tools required, simply push the flexible  tubing into your   fittings (sold separately) and put up your system in  an afternoon.
    • 3/4" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Includes:  

    • 100 ft. of 3/4" ID Tubing

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

  • Dougs Headers DEC300A Stainless Steel Electric Exhaust Cut-Outs-3 Inch
    Dougs Headers DEC300A Stainless Steel Electric Exhaust Cut-Outs-3 Inch
    x
                These rugged Doug's Headers electric exhaust  cutouts allow you to convert to a wide-open, unobstructed exhaust system  with the flip of a dash-mounted switch. Doug's electric exhaust cutouts  are built to last; they feature full stainless steel construction with a  heavy-duty Dayton gear reduction rack and pinion electric drive  mechanism. Best of all, these cutouts use a self-cleaning, knife-edge  seat for a leakproof seal every time, whether open or closed. Doug's  Headers electric exhaust cutouts include a pre-wired harness, a toggle  switch, and fuses for an easy installation.
    • 3.000 in.
    • Stainless steel
    • Sold as a pair
    • Includes wiring harness
  • Combo Exhaust Bend/Header Tubing, 2-1/2 Inch
    Combo Exhaust Bend/Header Tubing, 2-1/2 Inch
    x
                These mild steel combo exhaust bends are perfect for building or repairing headers.  They feature smooth mandrel bends with a bend radius of 7" and an outside diameter of 2-1/2". 
    • Mild steel
    • For building or repairing headers
    • 16-gauge (0.06" thick)
    • 2-1/2" O.D

  • Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    x
                Durable, all-steel construction will not warp, fray  or crack. Attractive, scratch  resistant,  baked-on powder coat finish wipes clean for long-lasting  beauty for any  shop or work area. Installation is easy and absolutely no  framework is  required. 
    • 32" tall x 32" wide x 3/4" deep
    • Pack of two
    • Durable and versatile
    • 20 gauge steel with a baked-on rust and scratch resistant finish
    • Slotted to accept Wall Control accessories
    • Holes accept conventional 1/4" peg hooks
    • Choose from blue, grey, red, white, or galvanized steel
  • Aluminum Fan Shroud Kit for 22 Inch Radiator, Engine Driven Fan
    Aluminum Fan Shroud Kit for 22 Inch Radiator, Engine Driven Fan
    x
                

    These universal fit aluminum fan shroud kits can be built to fit many applications with a belt-driven fan. The adjustable collar will accommodate 15"-20" fan diameters.

    Measures 19" tall x 16-3/4" wide x 2-5/8" deep. Works well with Speedway & Afco 24" wide radiators and will work with the Speedway & Afco 22" wide radiators with slight trimming of the width of the shroud.

    • Made for exact fit of many Muscle Car and Hotrod radiators
    • Allows the installer the choice of off center, side-to-side and above the radiator fan positioning
    • For crossflow or downflow radiator mounting
    • Includes fully-formed shroud of .063" lightweight aircraft aluminum
    • 3" trimmable collar
    • Adjustable collar; adjusts for 15-20" fan diameters
    • Includes all the necessary hardware and mounting instructions
    • Measures 19" tall x 16-3/4" wide x 2-5/8" deep

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

    Fan Shroud Installation Instructions (PDF)

     

  • Speedway Electric Speedometer, 3-3/8 Inch Diameter
    Speedway Electric Speedometer, 3-3/8 Inch Diameter
    x
                These electric speedometers are perfect for your rod or race project. They feature a white face with bold black lettering and a bright orange needle for quick monitoring.  Our 0-160 mph speedometers also come with a stainless steel bezel and a complete installation kit. 
    • 3-3/8” body diameter
    • 3-3/4 ” bezel
    • Overall Diameter: 3-3/4"
    • Body Length: 1.60"
    • Stud Length: 1.00"
    • Backlit white face with black lettering
    • Orange needle
    • Electric
    • 0-160 mph range
    • Stainless steel bezel
    • Includes installation kit
    • SENDER NOT Included
    • Replacement light socket assembly available # 910-65075

    Instructions (PDF)

  • Hooker Headers 8501HKR LS Cast Iron Exhaust Manifolds
    Hooker Headers 8501HKR LS Cast Iron Exhaust Manifolds
    x
                Please view the product's page for more information
            
  • Lokar BAG-6085 73-98 Chevy Truck Billet Aluminum Throttle Pad w/Rubber
    Lokar BAG-6085 73-98 Chevy Truck Billet Aluminum Throttle Pad w/Rubber
    x
                

    These direct replacement throttle pads for 1973 - 1998 Chevy Truck feature rubber inserts and measure 2"x5".  These billet aluminum pads are available in a brushed finish.

    • Mounts onto factory arm and spring
    • Quick and Easy Installation
    • Available in brushed finish

    Throttle Pedal Pad Installation Instructions (PDF)

  • 55 Degree Steering Column Mount for T-Bucket Kit
    55 Degree Steering Column Mount for T-Bucket Kit
    x
                
    These mounts are the economical mounting solution for T-bucket steering columns.  They are designed to be used in conjunction with our 1-3/4" diameter stainless or plain steel hot rod steering columns.
    • Mount puts the steering column at a 55 degree angle to the firewall
    • Fits all of our deluxe "T" bodies with the floor / firewall installed
    • Designed to be used with a 1-3/4" diameter steering column
  • Standard Workbench Tool Organizer Kit, Wall Control Storage System
    Standard Workbench Tool Organizer Kit, Wall Control Storage System
    x
                Over 10.5 sq. ft. of storage space and assorted  shelving options, hooks and brackets. The standard workbench provides  the superior, easy access storage needed for a safe and efficient  workspace.

    Galvanized steel panels are easy to install with pre-drilled mounting holes on 16" centers. A built-in frame flange provides ample hook clearance and full access to all holes. The patented Double Offset hook engagement improves hook and stability for safer, more secure tool storage. 

    Included:
    • (3) Combo panels 32" x 16"
    • (1) 9" shelf assembly with dividers
    • (1) 6" shelf assembly
    • (3) Plastic bins with bin hanger
    • (1) Screwdriver holder assembly
    • (1) Hammer bracket
    • (20) Assorted hooks & brackets
    • Mounting hardware & instructions
    • Choose from red, white, blue, or black
  • OTB Gear 4470 Mohawk Style Air Cleaner, Straight Base, Polished
    OTB Gear 4470 Mohawk Style Air Cleaner, Straight Base, Polished
    x
                Mohawk steps out with 5 fins and an elegant stepped shoulder design. This variation uses a straight base. If running twin carbs, measure your center to center dimensions. We use our Platinum Series air filter with A-356 aircraft grade castings for a show quality product. The filter media is a medium gray, washable oiled cloth. Hardware furnished includes a polished stainless socket drive top screw. Diameter 6-3/4" - Height 4-1/8". Fits carbs with the typical 5" base.
    • Washable Filter Media
    • Polished
    • Straight base plate
    • Fits carbs with the typical 5-1/8" base
    • Hardware furnished includes a polished stainless socket drive top screw
    • Diameter 6-3/4"
    • Height 4-1/8"
    • Priced and sold as single assembly - purchase 2 for a twin carb application
  • Goodridge 15 Inch Braided Brake Line with 90 Degree End
    Goodridge 15 Inch Braided Brake Line with 90 Degree End
    x
                

    These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    • Stainless steel
    • 90° fitting on one end and a straight fitting on the other
    • Brake lines, clutch lines and gauge lines
    • Available with AN3 or AN4 fittings
    • Sold individually

    Select applicable length. AN size is the "-#" at the end of the part number.

  • OTB Gear 4420 Finned Teardrop Air Cleaner, Polished
    OTB Gear 4420 Finned Teardrop Air Cleaner, Polished
    x
                Now this air cleaner makes a statement! This product would have been very much in style in the 50's. Reminiscent of the old twin 2 barrel air cleaners, but nicer... Cast in aircraft grade aluminum, and polished to a high shine. This little item will really be a show stopper on your engine. Provided with a quality, washable, oiled air filter, base and mounting hardware. 
    • For carbs with 5-1/8" neck
    • Includes a quality, washable, oiled air filter, base and mounting hardware
    • Dimensions (With filter): 11-1/2" X 9" X 4-3/8"
    • Mounting screw to front edge: 4.5"
    • Mounting screw to back edge: 7.5"
  • Speedway Premium 4 Inch Fuel Filter Element, Stainless Steel
    Speedway Premium 4 Inch Fuel Filter Element, Stainless Steel
    x
                By simply replacing and/or cleaning your filter elements  regularly, you  can avoid costly repairs to your fuel system and ensure  peak engine  performance. These elements can be used with gas or alcohol and are easily cleanable and reusable. 
    • Soldered end caps
    • For use with gas or alcohol
    • Cleanable and reusable
    • Single open end
    • 304 stainless steel
    • 12 GPM flow rate
    • 63 micron filtration
  • Moose Blocks 2017 Engine Heater Hose Bracket     1/2 NPT Universal Mount
    Moose Blocks 2017 Engine Heater Hose Bracket 1/2 NPT Universal Mount
    x
                These hot set up blocks from Moose Blocks feature an anodized aluminum black finish and 1/2" NPT thread pitch.
    • 1/4" bolt hole in the center for universal mounting
    • 1/2" NPT threads
  • Lokar 70-BHRB Billet Round Shifter Boot Ring With Boot
    Lokar 70-BHRB Billet Round Shifter Boot Ring With Boot
    x
                

    Lokar Shifter Boots are black Naugahyde and include a boot, billet aluminum ring with ball-milled edge and stainless screws.

    It also includes a foam rubber seal to eliminate air flow from the floor through the boot.

    All boots hug the shifter lever and there are no unsightly pull ties or laces.

  • RapidAir M8021 Maxline Air Hose Connector, 1/2 Inch Union Fitting
    RapidAir M8021 Maxline Air Hose Connector, 1/2 Inch Union Fitting
    x
                

    RapidAir Maxline industrial compressed air piping systems are fast and easy to install. They feature leakproof, corrosion resistant fittings that are built to last.  These fittings connect the 1/2" reinforced tubing together at line breaks.  These air hose connectors work great for your workshop with applications from automotive to woodworking.

    • Nickel plated brass
    • Double o-ring design
    • Split ring allows disassembly
    • No expensive tools required
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils
    • Included in our Maxline Air Hose Outlet Kits

    Maxline Brochure (PDF)

    Maxline Installation Instructions (PDF)

    RapidAir Maxline Warranty (PDF) 

  • Lokar TD-30C6TM Ford C6 Hi-Tech Transmission Dipstick, Transmount
    Lokar TD-30C6TM Ford C6 Hi-Tech Transmission Dipstick, Transmount
    x
                

    You have flexibility with our Teflon-lined Flexible Braided Stainless Ford C6 Transmission Dipstick. Kit comes complete with braided stainless outer housing and heat resistant E-Z to read flexible inner dipstick measuring cable. Inner cable is molded with appropriate trans fluid levels. Billet aluminum handle and billet aluminum fittings complement Lokar's Flexible Engine Dipsticks. Ford C6 transmission dipstick kit includes dipstick funnel adapter to assist in filling. Designed for "push in" style transmissions. Dipstick seals with double O-rings.  Mounts to the bell housing.

    Kit comes complete with installation instructions.

  • Lokar EC-80FUTB T-Bird Emergency Brake Cables, Black Housing
    Lokar EC-80FUTB T-Bird Emergency Brake Cables, Black Housing
    x
                Please view the product's page for more information
            
  • World Products 053030 Small Block Ford Windsor Jr Cylinder Head, Bare
    World Products 053030 Small Block Ford Windsor Jr Cylinder Head, Bare
    x
                When it comes to high performance replacements for  factory cast iron heads, World’s WINDSOR JR. has the market covered with  180cc intake runners, plus the 64cc exhausts ports are substantially  larger than OEM Ford heads. Add a highly efficient combustion chamber  design and larger valves and you have big bolt-on power. This head is a 50-State emissions legal factory replacement.The WINDSOR series  of heads are the cost-effective choice for serious power from your 302!

    • Head is sold individually
    • Material: High density cast iron
    • Valve Seats: Intake (integral), exhaust (hardened)
    • Valve Guides: Integral cast iron
    • Spring Seats: Machined for 1.560" and 1.250"
    • Intake Runner: 180cc, standard port location
    • Exhaust Ports: 64cc, standard location (dual exhaust bolt pattern to accommodate large custom headers)
    • Combustion Chamber: 58cc
    • Spark Plug: 14mm 5/8" .460" reach tapered style, Accel 276 or 276S or equivalent
    • Valve Job: Multi-angle intake and radiused exhaust
    • Valve Cover Rail: Raised
    • Valve Angle: Stock 20°
    • Accessory Bolt Holes: Stock
  • Lokar XEHB-7000F Floor Mount Emergency Hand Brake, Black Finish
    Lokar XEHB-7000F Floor Mount Emergency Hand Brake, Black Finish
    x
                

    This floor mount emergency hand brake is designed after the automotive industry standard. Lever has been designed with durability in mind and features black powder coated steel construction. Ratchet cut gear plate and lock are heat treated for strength and safety. Special feature includes 4-point mounting capabilities for floor mount or side mounting for personal applications. Comes complete with clevis for installation with Lokar Emergency Brake Cables, Lokar # EC-80FU, Speedway Motors # 491-80FU suggested below.

    Cables are sold separately. E brake handle measures 10" from end-to-end.

    Lokar Install Tip:  Ever think about mounting the floor mount hand brake sideways in front of your seat?  You can!

  • Fast Shafts BBSK-10 Billet U-Bolt Strap Kit, 1-1/16 Inch
    Fast Shafts BBSK-10 Billet U-Bolt Strap Kit, 1-1/16 Inch
    x
                

    NEVER OVERTIGHTEN U-BOLTS AGAIN !! 

    These universal billet strap kits fit 1310 U-Joint, Steel Girdle, Ford 9 inch.  They include case hardened bolts, nuts, flat and lock washers.

    • Billet strap kit
    • Fit 1310 U-Joint, Steel Girdle, Ford 9 inch
    • Include case hardened bolts, nuts, flat and lock washers
  • Lokar TCB-40LT4 94-Up LT1-LT4 Throttle Cable & Kickdown Cable Bracket
    Lokar TCB-40LT4 94-Up LT1-LT4 Throttle Cable & Kickdown Cable Bracket
    x
                

    These bracket kits are Lokar's answer to LT1 cable problems. Stainless throttle and kickdown brackets replace factory brackets. Kit includes stainless arm to mount on LT1 throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns.

    • Stainless throttle and kickdown brackets
    • Replace factory brackets
    • Includes stainless arm to mount on LT1 throttle body to operate kickdown
    • Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns (see below for part #s)
  • Wilwood 260-1333 Clutch Slave Cylinder, Pull Type
    Wilwood 260-1333 Clutch Slave Cylinder, Pull Type
    x
                
    • “Pull Type” slave cylinder with 7/8" bore
    • Billet aluminum for high strength
    • Plated with a tough anti-corrosion finish
    • Stainless steel push rod has a longer stroke than most cylinders assuring a full release of the clutch
    • Ideal for Drag Racing, Late Model Stock, Pro Series and Off Road applications
    • Recommended master cylinder sizing is 3/4”
    • Overall length:  11.70"
    • Inlet size:  1/8-27 NPT
    • Inletfit:  3/8-24 IF Female
    • Stroke:  1.38
    • Volume:  0.60

    8352601333 Instructions (PDF)

  • Flathead Center Dump Headers, Chrome
    Flathead Center Dump Headers, Chrome
    x
                

    Now available in CHROME! Improve the performance and exhaust note of your 1932-53 flathead Ford V8 with these affordable, high-quality tubular steel headers. They have a compact center-dump design. The center-dump design will not work on Ford cars with stock wishbones.

    Includes:

    • Block gaskets
    • Collector gaskets
    • Pair of companion 2-1/2" flanges for beginning the exhaust system (companion flanges fit 2-1/2" pipe).

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

    Not legal for sale or use in California on pollution controlled vehicles

     

     

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25