Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Classic Truck

Shop Classic Truck At Speedway Motors

Speedway Motors is the source for all your classic pickup truck parts. No matter whether you're wrenching on a half ton Ford F100, Chevy 3100, or Chevy C10, we can help you build the truck of your dreams. Also, for those of you who drive Chevy S10 or diesel trucks, Speedway Motors has your lowering kits, drop spindles, V8 swap kits, tuners, modules, and cat-back exhaust systems too.

Featured Products
  • Clevite H-Series 1969-Up Small Block Chevy Rod Bearings
    New
    Clevite H-Series 1969-Up Small Block Chevy Rod Bearings
    (Part #757R663H)
    x
                Clevite's H-Series was developed primarily for use in NASCAR type racing, but  they are suitable for all types of competition engines. These sets are  specifically for 1969-Up 302-305-327-350 S/B Chevy "Large Journal" engine (with 2.100" rod  journals).
    • Use H-series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.
    • H-Series bearings should be used if contact patterns obtained with P-series parts are too narrow. Contact pattern should ideally cover 2/3 to 3/4 of the bearing surface.
    • If you aren't sure which type of performance bearing to start with, the H-Series will be your best choice.
    • X001 has .001" extra bearing clearance

    H-Series Features (Link)
  • Red Line 80204 Water Wetter Coolant Additive
    Red Line 80204 Water Wetter Coolant Additive
    (Part #91015709)
    x
                

    Red Line Water Wetter Super Coolant additive is a unique wetting agent which reduces coolant temperatures by as much as 20° F. This is a liquid coolant treatment product which is designed to be added to solutions of antifreeze and water to help improve the heat transfer properties of glycol-based antifreeze. This liquid product can be used to provide rust and corrosion protection in plain water for racing engines, which provides much better heat transfer properties than glycol-based antifreeze. Improves the ability of coolant to wet heat transfer surfaces by 50%.

    • Reduces or eliminates bubbles that form on hot metal surfaces to reduce coolant temperatures by up to 20°
    • Superior heat transfer properties compared to glycol-based antifreeze
    • Compatible with new or used antifreeze (including DEX-COOL and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems
    • Improves heat transfer and reduces cylinder head temperature
    • Designed for use with all modern aluminum, cast iron, copper, brass and bronze cooling systems
    • Cleans and lubricates water pump seals
    • Reduces cavitation and complexes with hard water to reduce scaling
    • Does not lower cooling system below the thermostatically-controlled temperature
    • 12 fl. oz. bottle treats 12-20 quarts

    Water Wetter Tech Info (PDF)

    Learn more about how cooling systems work with proper coolant mixture and additives by reading our tech article. Cooling System Principles.   

  • Wilwood 120-8079-RSP BNSL6R Caliper, 1.62/1.12/1.12 Pistons, 1.10 Disc
    Wilwood 120-8079-RSP BNSL6R Caliper, 1.62/1.12/1.12 Pistons, 1.10 Disc
    (Part #8351208079RSP)
    x
                The billet SL6R series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. The key to the superior performance of the SL6R comes from the extremely durable and efficient body design. Starting at 4.84 pounds it is the product of computer generated solid modeling and FEA stress analysis technology. Full length stiffening ribs and a reinforced radial transition from the piston bore housings to the closed end bridges has produced the strongest SL caliper bodies ever built. When compared to open bridge calipers that use tube or stand spacers between the body halves, the closed end bridge design is measurably stronger with less separation or deflection under load. Additional strength and resistance to deflection comes from the four high-strength steel end bridge bolts. A fifth center bridge bolt provides even more overall strength and easy access to the pads without the need to remove the caliper from the mount.    A unique six-piston differential bore configuration provides balanced loading for even pad wear in sustained high heat environments. The standard SL6R calipers feature one-piece stainless steel pistons. Stainless is used for its slow heat transfer properties and high resistance to corrosion. The SL6R/ST models feature Wilwood's exclusive Thermlock pistons. This multi-part piston design creates a highly efficient thermal barrier to further reduce heat transfer from the pads to caliper body, seals, and fluid. Cooler temperatures translate to longer service life and less chance for heat induced pedal fade.   In addition, each SL6R is equipped with SRS bridge plates. SRS plates eliminate all bridge wear caused by pad gouging and extend the service life of the caliper. The spring-loaded action of the SRS plates also eliminates pad rattle and dampens the harmonic vibrations that contribute to pad squeal. Two piece bleed screws and dampened fluid tubes are recess mounted to shield them from track debris and other potential damage sources. High temperature, square faced bore seals provide the largest possible sealing area and controlled piston retraction on release. The full range of Wilwood pad compounds is available to match the brake response and heat range of any competition or sports driving application.   Calipers in this group feature a reduced width outboard body to provide additional clearance between the caliper face and the wheel or hub. These calipers were originally built for use with wide 5 hubs, but have found their way to OE performance "Big Brake" conversions, road racing, and other close fit wheel applications. The caliper bridge radius will clear rotors from 11.75" to 13.00" in overall diameter. Each caliper in this group uses 7420 type 20mm thick pads.
            
  • 4 Inch Peep Mirror
    $14.99
    Product Rating: 4.12 Stars
    4 Inch Peep Mirror
    (Part #92550745)
    x
                Our 4" diameter peep mirror clamps to the top edge of the door. Fits over a door edge that is app. 1/8" thick or thinner. Fits right or left side (reversible). A popular and universal mirror at a low cost. Sold each.
            
  • MSD 32233 Black Super Conductor Jeep 4.0L, 93-98
    MSD 32233 Black Super Conductor Jeep 4.0L, 93-98
    (Part #54732233)
    x
                The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

    Installation Instructions (PDF)

    Installation Instructions (PDF)

    • Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
      Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
      (Part #91031831)
      x
                  

      Brass adapter.

      Straight 3/8"-24 IFF to 1/8" NPT Male Adapter

    • Speedway Chevy Universal Aluminum Radiators
      Speedway Chevy Universal Aluminum Radiators
      (Part #917347)
      x
                  

      Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

      These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

      • All-aluminum, furnace-brazed construction
      • No cheap epoxy glue or crimped in gaskets
      • Maximum amount of fins per inch allows greater heat transfer
      • Billet filler necks
      • Available in 22", 24", 28", or 31" widths (measurements include tanks)

      Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

    • Bearing-Seal Kit for Two Mustang II Brake Rotors
      Bearing-Seal Kit for Two Mustang II Brake Rotors
      (Part #91031000)
      x
                  

      This bearing and seal kit includes two inner wheel bearings, two outer wheel bearings and two inner grease seals. This kit is enough for two brake rotors and is intended to be used with a new rotor installation as this kit does not include the bearing races or cups.

      If your project willl be making use of used rotors, you will require new bearing races or cups.  Therefore you will need to purchase the bearing and seal kit # 910-31052 suggested below in place of kit # 910-31000.

      Works with Mustang II/Pinto and Granada rotors using Mustang II/Pinto spindles only. It will not work for installing Mustang II/Pinto brake rotors on 1949-1954 Chevy spindles. Not for use with early Chevy spindle brake conversion kits.

      -Large Bearing-
      Thickness: .656"
      Upper OD: 1.900"
      Lower OD: 2.150"
      Bearing ID: 1.375"

      -Small Bearing-
      Thickness: .651"
      Upper OD: 1.380"
      Lower OD: 1.570"
      Bearing ID: 0.864"

      Never install new hubs with old bearings.

    Filter

    "Classic Truck" Page 1 of 50

    Page 1 of 50

    • MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
      New
      MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
      (Part #54729711)
      x
                  

       If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

      • Fits over valve covers and coil assemblies
      • Smooth Contoured Finish
      • Works with OEM coils and MSD's Multiple Sparking Coils
      • Sold Individually
      • LS1, LS6

      Installation Instructions (PDF) 

    • System 1 Filtration Short Replacement Filter Element 4 Inch 45 Micron
      New
      System 1 Filtration Short Replacement Filter Element 4 Inch 45 Micron
      (Part #696100360)
      x
                  

      By simply replacing and/or cleaning your filter elements regularly, you can avoid costly repairs to your fuel system and ensure peak engine performance. Check out this short 4 inch replacement element from System 1 Filtration.

      • Short 4" replacement element
      • 45 micron 
      • Sold Individually

       

    • Classic Instruments SN35T8 Fuel Sender Tube, 8 Inch, 240-33 OHM
      New
      Classic Instruments SN35T8 Fuel Sender Tube, 8 Inch, 240-33 OHM
      (Part #2751031)
      x
                  Classic Instruments Tube Fuel Level Senders are perfect for  applications  where swing arm senders won't fit due to issues with  clearance. These  Tube Fuel Senders also provide a more accurate reading  than swing arm  senders. Compatible with both both gasoline and diesel  fuels. 
      • 240-33 OHM
      • 8 Inch Length 
      • Compatible with both gasoline and diesel
      • Compatible with fuels with up to 10 percent Ethanol
      • Designed to work with any classic fuel level gauge
    • OTB Gear 6500-R/L Finned Fuel Filter R/L
      New
      OTB Gear 6500-R/L Finned Fuel Filter R/L
      (Part #9106501)
      x
                  Please view the product's page for more information
              
    • Torque Converter, TH350, 3500+ RPM Stall 10 Inch
      New
      Torque Converter, TH350, 3500+ RPM Stall 10 Inch
      (Part #109617)
      x
                  

      This 10" Torque Converter is designed for use in light cars where other stall converters may still be too "tight." This torque converter has a painted finish and is sold individually. 

      • 10" Converter
      • For GM TH350 transmission
      • 3500+ RPM stall
      • Sold Individually 

      To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter. 

       

    • OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
      New
      OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
      (Part #9104660)
      x
                  

      This Orbit cast heavy aluminum spun air cleaner from OTB Gear has a truly unique look. The spun shell can be painted or clear coated.

      • Polished casting countersunk into heavy wall satin aluminum spinning
      • Outer shell can be painted or clear coated
      • Washable permanent filter
      • Fits standard 5" four bbl. Carb
      • Diameter 12" - height 4-1/2" 
      • Made in the USA

       

    • MSD 2970  Atomic LS Coil Covers LS2, LS3, LS7, Red
      New
      MSD 2970 Atomic LS Coil Covers LS2, LS3, LS7, Red
      (Part #5472970)
      x
                  

       If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

      • Fits over valve covers and coil assemblies
      • Smooth Contoured Finish
      • Works with OEM coils and MSD's Multiple Sparking Coils
      • Sold Individually
      • LS2, LS3, LS7

      Installation Instructions (PDF) 

    • OTB Gear 6505 Smooth Fuel Filter, Satin, Right-to-Left Fuel Flow
      New
      OTB Gear 6505 Smooth Fuel Filter, Satin, Right-to-Left Fuel Flow
      (Part #9106505)
      x
                  

      Finally there are fuel filters that are not only functional, but good looking as well! The OTB Gear smooth fuel filter is a permanent washable stainless mesh filter that will last a lifetime! Fuel flows right to left.  

      • Show quality
      • Right to left fuel flow
      • Permanent washable stainless filter 
      • Utilizes compact ORB/AN-6 fittings 
      • Compact, functional, good looking
      • Smooth Style
      • Made in USA

      Specs:

      • Very compact in size, the bowl is 2.4" in diameter
      • Total height and width are 4-1/4" and projection from surface is 3"
      • Inlet and outlet ports utilize ORB/AN-6 fittings to reduce the bulk of hose connections
      • Drilled for 5/16" mounting hardware - (not included)
      • 100 Micron

       

    • Fragola 231507 150 Degree Adapter Hose End Fitting, -6 AN to -8 AN
      New
      Fragola 231507 150 Degree Adapter Hose End Fitting, -6 AN to -8 AN
      (Part #617231507)
      x
                  
      This 150 degree Fragola hose fitting adapter allows you to connect a -6 AN hose to a -8 AN female fitting. Constructed from a high quality aluminum and features a red/blue andodized finish for a product that both looks and performs great. Works with a stainless or nylon braided hose.
      • 150 Degree
      • Aluminum Construction
      • Red/Blue anodized finish
      • Adapts -6 AN hose to -8 AN female fitting
      • -8 AN female fitting inlet
      • -6 AN hose outlet
      • Works with stainless or nylon braided hose 
    • Lokar BDI-9138 Goolsby Edition 5 Gauge Dash Insert, 3-3/8 Inch, Engine Turned
      New
      Lokar BDI-9138 Goolsby Edition 5 Gauge Dash Insert, 3-3/8 Inch, Engine Turned
      (Part #491BDI9138)
      x
                  

      The Goolsby Edition by Lokar Billet Aluminum Dash Insert accepts one 3-3/8” gauge and four 2-1/16” gauges. The through holes accommodate common aftermarket switches with a design that complements other products in the Goolsby Edition series.

      • Goolsby Edition
      • Engine Turned
      • Aluminum Dash Insert 3-3/8"
      • Polished
    • Clayton Machine TA-202 Elliptical Throttle Pedal
      New
      Clayton Machine TA-202 Elliptical Throttle Pedal
      (Part #231048)
      x
                  

      This elliptical throttle pedal from Clayton Machine has drilled I-beam arms. It also features durable chrome plating that never requires polishing.

      • Drilled I-beam arms
      • Durable chrome plating (never needs polishing)
      • Molded rubber pad
      • Clean “inline” styling
      • Fully adjustable arm with a spring loaded pedal
      • Dimensions: 12” tall, 1.5” wide

       

    • Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
      New
      Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
      (Part #6172245091)
      x
                  
      This black 45 degree Fragola hose fitting adapter allows you to connect a -8 AN hose to a -10 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.
      • Aluminum Construction
      • Black anodized finish   
      • 45 Degree 
      • Adapts -8 AN hose to -10 AN fitting   
      • -10 AN Fitting Inlet   
      • -8 AN Hose Outlet  
    • Edelbrock 2035 RPM Air-Gap Dual-Quad Intake Manifold/Carburetor Kit
      New
      Edelbrock 2035 RPM Air-Gap Dual-Quad Intake Manifold/Carburetor Kit
      (Part #3252035)
      x
                  Please view the product's page for more information
              
    • Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
      New
      Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
      (Part #2751034)
      x
                  

      Classic Instruments Tube Fuel Level Senders are perfect for applications where swing arm senders won't fit due to issues with clearance. These Tube Fuel Senders also provide a more accurate reading than swing arm senders. Compatible with both both gasoline and diesel fuels.

      • 240-33 OHM
      • 11 Inch Length 
      • Compatible with both gasoline and diesel
      • Compatible with fuels with up to 10 percent Ethanol
    • Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
      New
      Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
      (Part #91050305)
      x
                  

      Check out this 6-switch Rocker circuit breaker panel from Painless Performance. It features color coded lighted rocker switches, 18 feet of TXL wire, vibration resistant terminals and a black finish for reduced glare.

      • Features circuit breakers in place of standard fuses
      • Panel controls: Start, ignition, fuel pump, electric fan/water pump and 2 accessories
      • Made in the USA

      Assembly Instructions (PDF)

    • GT Performance 54-5717 GT3 Autocross II Pro-touring Wood Steering Wheel
      New
      GT Performance 54-5717 GT3 Autocross II Pro-touring Wood Steering Wheel
      (Part #910545717)
      x
                  

      This GT3 Autocross II Pro-Touring wood steering wheel from GT Performance pays tribute to a timeless performance design and elevates it to the next level. GT Performance did this by featuring a special tiered spoke design with lightening holes and fastened using unique aircraft grade rivets. This wheel has a three-bolt mounting pattern and is interchangeable with any standard three bolt hub or horn button.

      • Aluminum spoke construction
      • Special tiered spoke design
      • Fastened using unique aircraft grade rivets
      • Genuine hand rubbed stained mahogany rim with sculpted finger grips and sealed with a polyurethane clear coat for a protected gloss finish
      • Modular construction design allows for removal of the grip for custom painting to match your vehicles interior perfectly
      • 3-bolt mounting pattern, can be used with any GT3 installation hubs and GT3 horn buttons
      • This 3-bolt mounting pattern is interchangeable with any standard 3-bolt hub or horn button
      • Diameter: 15″ Dish: 2″
      • Made in the USA

      Frequently Asked Questions (PDF)  

      GT3 Steering Wheel Hub Applications (PDF)

    • Edelbrock 20674 RPM Air-Gap Dual-Quad Intake Manifold/Carburetor Kit
      New
      Edelbrock 20674 RPM Air-Gap Dual-Quad Intake Manifold/Carburetor Kit
      (Part #32520674)
      x
                  Please view the product's page for more information
              
    • Fragola 231807-BL 180 Degree Adapter Hose End Fitting, -8 AN to -6 AN
      New
      Fragola 231807-BL 180 Degree Adapter Hose End Fitting, -8 AN to -6 AN
      (Part #6172318071)
      x
                  

      This black 180 degree Fragola hose fitting adapter allows you to connect a -6 AN hose to a -8 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.

      • Aluminum Construction
      • Black anodized finish
      • 180 Degree
      • Adapts -6 AN hose to -8 AN fitting
      • -8 AN Fitting Inlet
      • -6 AN Hose Outlet 
      To learn more about our AN fittings, be sure to check out our tech articles; Fasteners - Brake, AN and Pipe Thread Fittings  and
      How to Assemble Push-On Hose Ends                                                                                           &nbs
    • Fragola 231813 180 Degree Adapter Hose End Fitting, -16 AN to -12 AN
      New
      Fragola 231813 180 Degree Adapter Hose End Fitting, -16 AN to -12 AN
      (Part #617231813)
      x
                  

      This 180 degree Fragola hose fitting adapter allows you to connect a -16 AN hose to a -12 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature a red/blue anodized finish for a product that both looks and performs great. Works with a steel braided hose.

      • 180 Degree
      • Red/Blue anodized finish
      • Aluminum Construction
      • Adapts -16 AN hose to -12 AN fitting 
      • Works with steel braided hose

       

    • Fragola 2312151 120 Deg. Adapter Hose End Fitting, -12 AN to -16 AN
      New
      Fragola 2312151 120 Deg. Adapter Hose End Fitting, -12 AN to -16 AN
      (Part #6172312151)
      x
                  

      Fragola's 120 degree adapter hose ends offer a black anodized finish and eliminate the permeation issues common with aftermarket racing hose. This adapter adapts -12 AN hose to -16 AN female fitting.

      • 120° hose end fitting
      • Aluminum construction
      • Black anodized finish
      • Adapts -12 AN hose to -16 AN female fitting
    Goto Previous PagePrevious Page
    1 2 3 4 5 ... 50