Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Banner

Speedway Motors is the source for all your classic pickup truck parts. No matter whether you're wrenching on a half ton Ford F100, Chevy 3100, or Chevy C10, we can help you build the truck of your dreams. Also, for those of you who drive Chevy S10 or diesel trucks, Speedway Motors has your lowering kits, drop spindles, V8 swap kits, tuners, modules, and cat-back exhaust systems too.

Featured Products
Speedway Chevy Universal Aluminum Radiators
Speedway Chevy Universal Aluminum Radiators
x
            

Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

  • All-aluminum, furnace-brazed construction
  • No cheap epoxy glue or crimped in gaskets
  • Maximum amount of fins per inch allows greater heat transfer
  • Billet filler necks
  • Available in 22", 24", 28", or 31" widths (measurements include tanks)

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

Speedway 1969-77 GM Midsize Caliper
Speedway 1969-77 GM Midsize Caliper
x
            Rebuilt 1969-77 mid and full size caliper. 7/16"-20 inlet so you can use the readily available brake hoses and hardware from Pre-1978 GM midsize cars. IMCA approved. 

No core charge required. Fits 1" thick rotor. 2.8" diameter pistons installed. It has 7-1/16" center to center mounting holes. The width between mounting tabs is 2-3/4".
1978-Up GM Metric Brake Calipers, IMCA Approved
1978-Up GM Metric Brake Calipers, IMCA Approved
x
            

These stock replacement single piston Metric calipers were standard equipment on 1978-88 GM mid-size cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to mid-size 1969-1977 caliper.

 

  • IMCA approved
  • No core charge required
  • 7/16"-20 inlet
  • Can be used with brake hoses from Pre-1978 GM intermediate cars
  • Brake pads & bolts sold separately

 

Note: Does NOT include brake pads or slider bolts and bushings.

Ford 9 Inch Posi Traction Third Member Assembly
Ford 9 Inch Posi Traction Third Member Assembly
x
            

Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!

These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.

 

Currie Differential Tech Bulletin (PDF)

 

910-48345 Instructions (PDF)

Speedys 9 Super 7    Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
Speedys 9 Super 7 Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
x
            

Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

There have been numerous attempts to reproduce this unit, with little success. "Speedy" Bill Smith of Speedway Motors in Lincoln, Nebraska, took on the challenge to make a great product even better. The 9 Super 7 ® Carb brings this reproduction of the original Stromberg 97 2 barrel carb into the 21st Century!

Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the choke assembly, accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result! 

Aesthetically, the 9Super7 is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

The other similarity that the 9 Super 7 shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Be sure to include the Secondary 9 Super 7 when installing multi-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Features original Stromberg 0.97" venturi diameter
  • Modern Nitrophyl float and Neoprene gaskets
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
  • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
  • Extended brass throttle shaft to simplify multi-carb linkage

915-11655 9 Super 7® Carb Instructions (PDF)

Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

1965-72 Chevy Pickup Rear Lowering Kit
1965-72 Chevy Pickup Rear Lowering Kit
x
            

This kit does it all! It lowers your truck 5", Corrects the shock angle so shocks work correctly, AND centers the rear axle. (All this is recommended when lowering 5" or more.) Includes 5" drop springs and shocks, deluxe trac bar, hardware and shock relocation kit.

Note: C-notch required. Coils come black powder coated. 

Lokar S-68148 12 Inch Replacement Shifter Lever
Lokar S-68148 12 Inch Replacement Shifter Lever
x
            These Lokar Replacement ATS shifter sticks are  direct replacements for your Lokar ATS automatic shifters. They are  manufactured from steel and are chrome plated for show-quality looks.  Available in different lengths, Lokar replacement ATS shifter sticks are  the perfect choice for your Lokar shifter.
  • 12 in. long
  • Replacement shifter stick only
  • Sold individually

"Classic Truck" Page 1 of 25

  • Head Stud Remover and Tap Alignment
    Head Stud Remover and Tap Alignment
    x
                

    Allows removal of stock press-in studs and aligns the tap (7/16"-14) to simplify the installation of screw in rocker studs.

    For S/B Chevy V8 engines.

  • Sill Weather Whisker Strip
    $29.99
    Sill Weather Whisker Strip
    x
                After putting in new glass and window felt run channels, you don't want to reuse your old whisker that's on your garnish moldings, so here's a way to prevent scratching up that new glass. We now offer a 48" long, 9/16" tall whisker strip. Only offered in black.
            
  • Magnetic Drain Plug
    $3.99
    Product Rating: 5.00 Stars
    Magnetic Drain Plug
    x
                

    Metal debris can wreak havoc on an engine. Install this plug in your oil pan to catch any metal filings before they get sucked into the oil pump and cause real damage!

    Will fit any oil pan with 1/2-20 threads.

  • Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    x
                

    Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

  • RideTech 90006781 Air Spring for Mustang II Suspension
    RideTech 90006781 Air Spring for Mustang II Suspension
    x
                These air springs are the industry standard for use on Mustang II based front suspensions. Rated 2140@100 lbs air pressure. Installed height is 4-1/2"-5" with a minimum height of 3" and a maximum of 7". 6-1/2" diameter when inflated. 1/4" NPT. Two 3/8" studs on top and one 3/8" hole on bottom.
            
  • Speedway Ultrasonic Multi-Purpose Parts Cleaner
    Speedway Ultrasonic Multi-Purpose Parts Cleaner
    x
                

    This ultrasonic parts cleaner is ideal for cleaning carburetor parts, fuel injector parts, small items such as wheel bearings, and other delicate components. Features a 6.6" x 5.4" x 2.5" tank size and includes a cleaning basket. 

    • Works on 110 volt power
    • Adjustable timer in 5 min. increments up to 30 mins.
    • Works well with a white vinegar solution
  • Specialty Power Windows WWK-2 Standard Universal Wiper Drive Kit
    Specialty Power Windows WWK-2 Standard Universal Wiper Drive Kit
    x
                

    This universal, dual wiper drive kit has two wiper shafts that are driven by a remote mounted, commercial duty, 2-speed wiper motor. The sweep is adjustable from 90°-160° in 10° increments. Wiper shafts accept arms (not included) that fit 1/2" fine spline knurls or arms that fit 1/4" shafts. 

    This complete drive kit has a standard 72" drive cable and 2-speed rotary (knob) switch.

    Manufactured by Specialty Power Windows.

    Instruction Sheet

  • SPAL Thermoswitch Relay and Wiring Harness Kit
    SPAL Thermoswitch Relay and Wiring Harness Kit
    x
                

    This easy to use cooling fan relay kit includes a labeled wiring harness, 40 amp relay, fuse holder and coolant sensor. Available with 185° on/165° off or 195° on/175° off. Works great with the Spal Pulse-Width Fan Controller.

    • Relay wiring kits are a must-have when installing an electric fan
    • Designed to safely integrate with OEM wiring
    • Waterproof 40/50 Amp relay
    • Printed wires (for ease of installation)
    • 3/8" NPT (National Pipe Thread) stainless steel switch
    • Optional switched override capability
    910-64028 Instructions (PDF)
  • 90 Degree Crimp-On O-Ring Heater Hose Fitting, -10 AN
    90 Degree Crimp-On O-Ring Heater Hose Fitting, -10 AN
    x
                

    These premium -10 size (7/8" x 14 TPI) crimp-on hose fittings feature O-ring seals and a 90 degree bend. Ideal for use with heater bulkhead plates.

    Note: Will need to be crimped by your local shop. 

  • Rocker Arm Balls for 7/16 Inch Stud
    Rocker Arm Balls for 7/16 Inch Stud
    x
                Replacement rocker arm pivot balls with oil slots. Comes in a set of 16 for use with 7/16" rocker arm studs.
            
  • Universal Expanding Body Mounts
    Universal Expanding Body Mounts
    x
                

    If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.

    Not recommended for cars newer than 1934.

  • 14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    x
                

    These power steering adapter fittings are designed to simplify the hose connection on your power steering lines. They are made from quality material and are designed to withstand even the harshest environments. The adapter fittings are the perfect solution for adding new lines or for those tight-fit areas where normal, straight fittings won't fit.

    Banjo Bolt Fitting for Power Steering Pump

    • 14mm to Male AN6 
    • Zinc-plated steel assembly
    • For the pressure connection (outlet) to the pump.
    • 90 Degree
    • Swivel
    • Male Threads
  • Mustang II Coil Spring Cushion
    Mustang II Coil Spring Cushion
    x
                

    These are just like the stock Mustang II used on top of the front coil spring to eliminate noise and binding.

  • Titan Tools 51503 Mini Tubing Bender
    $14.99
    $19.97
    Product Rating: 5.00 Stars
    Titan Tools 51503 Mini Tubing Bender
    x
                
    • Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
    • Use with Brass, Copper, Steel, or Aluminum
    • Compact for limited accessibility applications
  • Hidden Tail Gate Latch w/ 21 Inch Straps
    Hidden Tail Gate Latch w/ 21 Inch Straps
    x
                

    The last thing you want on your tricked-out classic truck are beat-up old tailgate latches and rusty tailgate chains. This clean latch setup uses small stainless steel brackets that attach to the tailgate, stainless catch assemblies with spring-loaded nylon buttons that install in the bed sides, and woven nylon check straps to hold your tailgate open without damaging that expensive paint job. It's an easy-to-install system that works as nice as it looks and wont rust or rattle.

    910-00021 Instructions (PDF)

  • High Pressure Radiator Cap, 22-24 Lbs
    High Pressure Radiator Cap, 22-24 Lbs
    x
                

    A must have when racing! High pressure cap for radiators raises boiling point of water.

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

  • Straight Aluminum Hose Connectors, 6 Inch
    Straight Aluminum Hose Connectors, 6 Inch
    x
                

    These 6" long aluminum radiator/coolant hose connectors have a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

    Choose hose diameter (O.D.) needed.

  • Tru-Shot Rechargeable Liquid Sprayer, Black
    Tru-Shot Rechargeable Liquid Sprayer, Black
    x
                

    Great for use with Mudd-Off, Mud-X, Brake Kleen, penetrating oils or solvent based products. Not for all water based products.

    • One quart capacity
    • Powder coated steel can
    • Adjustable nozzle
    • Works with 80-100 psi
  • 1965-72 Chevy Pickup Rear Lowering Kit
    1965-72 Chevy Pickup Rear Lowering Kit
    x
                

    This kit does it all! It lowers your truck 5", Corrects the shock angle so shocks work correctly, AND centers the rear axle. (All this is recommended when lowering 5" or more.) Includes 5" drop springs and shocks, deluxe trac bar, hardware and shock relocation kit.

    Note: C-notch required. Coils come black powder coated. 

  • 1964-66 Chevy Pickup Switch Panel Cover
    1964-66 Chevy Pickup Switch Panel Cover
    x
                

    These billet aluminum switch panel covers are made to fit your 1964-1966 Chevy pickup truck dash.  They are designed to fit in place of your switches for a new styled sleek look.

    • Billet aluminum
    • 1964-1966 Chevy Pickup
    • Switch eliminator panel
  • Synthetic Chamois
    $4.99
    $9.95
    Synthetic Chamois
    x
                

    Use on cars, furniture, glass, etc. Can be used wet or dry and washed up to 500 times. Big 26" by 19".

     

     

  • Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    x
                

    This Lokar Floor Mount Emergency Hand Brake features a chrome plated steel e brake handle and is designed after the automotive industry standards. The ratchet cut gear plate and lock are heat treated for strength and safety. Special feature includes 4-point mounting capabilities for floor mount or side mounting for custom applications.

    Comes complete with clevis for installation with Lokar Emergency Brake Cables, Lokar # EC-80FU, Speedway Motors # 491-80FU suggested below. Cables are sold separately.

    Lokar Install Tip:  Every think about mounting the floor mount hand brake sideways in front of your seat?  You can!

  • Panhard Bar Rear Weld-on Kits
    Panhard Bar Rear Weld-on Kits
    x
                

    Use on almost any street rod. Required for coil spring and coil-over rear suspensions. Complete kit includes rod, brackets and 5/8" hardware. Ready to install. 25.5" long.

    916-49022 Instructions (PDF)

  • 1932-1953 Flathead Ford V8 Single Valve Springs
    1932-1953 Flathead Ford V8 Single Valve Springs
    x
                

    Our complete line of valve train parts to help your flathead Ford V8 run on unleaded fuel. These heavy duty single valve springs are made from top-quality chrome silicon steel and are designed to work with stock 1932-1953 Ford retainers. 

    • Recommended for most street performance 1932-53 Ford/Mercury Flathead V8s
    • Chrome silicon material delivers reliable performance
    • Proper seat pressure for most street and street/strip Flathead cams
    • Installed Height:  2.00"
    • Seat Pressure:  85 lbs @ 2.00" installed height

    Note: "Full Race" cams should be paired with our 450-4005 dual valve springs.

    Flathead Valve Assembly (Link)

     

  • Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    x
                Durable, all-steel construction will not warp, fray  or crack. Attractive, scratch  resistant,  baked-on powder coat finish wipes clean for long-lasting  beauty for any  shop or work area. Installation is easy and absolutely no  framework is  required. 
    • 32" tall x 32" wide x 3/4" deep
    • Pack of two
    • Durable and versatile
    • 20 gauge steel with a baked-on rust and scratch resistant finish
    • Slotted to accept Wall Control accessories
    • Holes accept conventional 1/4" peg hooks
    • Choose from blue, grey, red, white, or galvanized steel
  • Dura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardware
    Dura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardware
    x
                

    Kit Includes:

    • (4) Head Dowels
    • (2) Timing Cover Dowles
    • (3) Cam Bolts
    • (1) Cam Lock Plate
    • (2) Oil Filter Adaptor Bolts
    • (1) Long Woodruff Key
    • (2) Short Woodruff Keys
    • (2) Transmission Dowels
  • 1935-37 Ford Pickup Rear Fender Filler Panel
    1935-37 Ford Pickup Rear Fender Filler Panel
    x
                
            
  • Longacre Accuset II Scale Kit
    $999.99
    Product Rating: 3.00 Stars
    Longacre Accuset II Scale Kit
    x
                
    • Push one button for all 4 wheel weights plus cross weight
    • Push a second button for all partial %
    • Baseline memory recall
    • Heavy duty red HiFlex cables with billet AN connectors
    • 4 LMF™ swirl finished 15" x 15" low profile pads
    • 1500 lb. per pad capacity, 6000 lb. total
    • 2-year limited warranty
    • Includes FREE scale pad box

    Instructions (PDF)

  • King Chrome GM One Wire Alternator, 100 Amp
    King Chrome GM One Wire Alternator, 100 Amp
    x
                

    Streamline engine compartment by eliminating excess wires with this 1-wire alternator.  It fit most GM applications and feature a beautiful chrome plated finish.  This one wire alternator simply needs hook up direct to the main battery lead or power source. The internal regulator picks up the available current and kicks the alternator into the charge mode at pre set voltage.

    • 100 amp, one-wire
    • Chrome plated finish
    • Quick, easy hook-up with supplied instructions
    • Attaches to all popular GM alternator brackets
  • Bearing-Seal Kit for Two Mustang II Brake Rotors
    Bearing-Seal Kit for Two Mustang II Brake Rotors
    x
                

    This bearing and seal kit includes two inner wheel bearings, two outer wheel bearings and two inner grease seals. This kit is enough for two brake rotors and is intended to be used with a new rotor installation as this kit does not include the bearing races or cups.

    If your project willl be making use of used rotors, you will require new bearing races or cups.  Therefore you will need to purchase the bearing and seal kit # 910-31052 suggested below in place of kit # 910-31000.

    Works with Mustang II/Pinto and Granada rotors using Mustang II/Pinto spindles only. It will not work for installing Mustang II/Pinto brake rotors on 1949-1954 Chevy spindles. Not for use with early Chevy spindle brake conversion kits.

    -Large Bearing-
    Thickness: .656"
    Upper OD: 1.900"
    Lower OD: 2.150"
    Bearing ID: 1.375"

    -Small Bearing-
    Thickness: .651"
    Upper OD: 1.380"
    Lower OD: 1.570"
    Bearing ID: 0.864"

    Never install new hubs with old bearings.

  • Flathead Lifter Wrench
    $9.99
    Product Rating: 4.25 Stars
    Flathead Lifter Wrench
    x
                

    Use this handy wrench to set your flathead's adjustable lifters.  For use with our 450-F8502 lifters.

  • Rubber GM Transmission Cushion
    Rubber GM Transmission Cushion
    x
                

    OEM-style rubber transmission cushion for many '58-'82 GM transmissions including TH350 auto, Muncie, Saginaw, and others.

    • Meets or exceeds OEM specifications 
    • Rubber formulation provides abrasion resistance and aging stability
    • Tough, hardened steel plate & inserts
    • Chemlock® bonding agent ensures superior rubber-to-metal bond
  • Speed Fast Stainless Safety Wire, .032 Inch
    Speed Fast Stainless Safety Wire, .032 Inch
    x
                Speed Fast 304 stainless steel safety wire. Sold in one pound rolls and comes with a handy belt clip.
            
  • 9 Inch Ford Viton Pinion Seal
    9 Inch Ford Viton Pinion Seal
    x
                

    These Viton 9" Ford rear axle pinion seals are good to over 400° F. Stock rubber seal starts to deteriorate at about 250° F.

  • Performance Tool W54220 Grease Suction Gun
    Performance Tool W54220 Grease Suction Gun
    x
                Great for filling or emptying rear ends and trannys.  You shouldn't be without one!
            
  • Three-Bolt Carb Base Gasket
    $1.99
    Three-Bolt Carb Base Gasket
    x
                Three bolt carburetor base gaskets fit Stromberg 97-style carbs and Holley 94-style carbs.
            
  • Chevy Front Timing Cover Chrome Bolt Kit
    Chevy Front Timing Cover Chrome Bolt Kit
    x
                Chevy front timing cover chrome bolt kit. 
            
  • Hot Stuff Exhaust Manifold Dressing
    Hot Stuff Exhaust Manifold Dressing
    x
                This space-age blend of stainless steel and ceramic compounds is the ideal coating for cast iron exhaust manifolds! 

    It withstands 2400F° (manifolds rarely exceed 1200°F). Only minimal preparation is required. Easily applied with a small brush or a rag. Coating heat-cures by simply running the engine for 10 minutes. Leaves a durable, raw cast iron appearance.

    A 2 oz. container will do 2-4 manifolds on average.

  • Universal Bolt-Through Engine Mount Cushion Kit
    Universal Bolt-Through Engine Mount Cushion Kit
    x
                

    Connects engine mounts to frame adapters. Heavy duty rubber cushion absorbs vibrations so your mounts won't break. These universal body mounts are required on all motor installations.

    Complete with bolts, washers, and rubber cushions. Does both sides.

    Engine Mounting Illustration (GIF)

  • Book - The Official 12 Volt Conversion Guide
    Book - The Official 12 Volt Conversion Guide
    x
                This guide book takes you step by step through the formerly terrifying task of converting your hot rod from 6 volt to 12 volts.   

    Includes the secrets to generator and alternator conversion and hook-up, lighting, gauges, ignition, starters, troubleshooting and more. There's even a cross reference from 6 to 12 volt bulbs.

    Twenty pages. Small easy to handle size 8-1/2" x 5-3/8".

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25