Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Classic Truck

Shop Classic Truck At Speedway Motors

Speedway Motors is the source for all your classic pickup truck parts. No matter whether you're wrenching on a half ton Ford F100, Chevy 3100, or Chevy C10, we can help you build the truck of your dreams. Also, for those of you who drive Chevy S10 or diesel trucks, Speedway Motors has your lowering kits, drop spindles, V8 swap kits, tuners, modules, and cat-back exhaust systems too.

Featured Products
  • Black Push-On Hose, -6 AN
    From: $3.49
    Product Rating: 5.00 Stars
    New
    Black Push-On Hose, -6 AN
    (Part #620106)
    x
                

    AN6 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push on fittings
    • When using at temp and pressure at the high end of the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Red Line 80204 Water Wetter Coolant Additive
    Red Line 80204 Water Wetter Coolant Additive
    (Part #91015709)
    x
                

    Red Line Water Wetter Super Coolant additive is a unique wetting agent which reduces coolant temperatures by as much as 20° F. This is a liquid coolant treatment product which is designed to be added to solutions of antifreeze and water to help improve the heat transfer properties of glycol-based antifreeze. This liquid product can be used to provide rust and corrosion protection in plain water for racing engines, which provides much better heat transfer properties than glycol-based antifreeze. Improves the ability of coolant to wet heat transfer surfaces by 50%.

    • Reduces or eliminates bubbles that form on hot metal surfaces to reduce coolant temperatures by up to 20°
    • Superior heat transfer properties compared to glycol-based antifreeze
    • Compatible with new or used antifreeze (including DEX-COOL and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems
    • Improves heat transfer and reduces cylinder head temperature
    • Designed for use with all modern aluminum, cast iron, copper, brass and bronze cooling systems
    • Cleans and lubricates water pump seals
    • Reduces cavitation and complexes with hard water to reduce scaling
    • Does not lower cooling system below the thermostatically-controlled temperature
    • 12 fl. oz. bottle treats 12-20 quarts

    Water Wetter Tech Info (PDF)

    Learn more about how cooling systems work with proper coolant mixture and additives by reading our tech article. Cooling System Principles.   

  • 4 Inch Peep Mirror
    $14.99
    Product Rating: 4.14 Stars
    4 Inch Peep Mirror
    (Part #92550745)
    x
                Our 4" diameter peep mirror clamps to the top edge of the door. Fits over a door edge that is app. 1/8" thick or thinner. Fits right or left side (reversible). A popular and universal mirror at a low cost. Sold each.
            
  • Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    (Part #91031831)
    x
                

    Brass adapter.

    Straight 3/8"-24 IFF to 1/8" NPT Male Adapter

  • CFR Performance HZ-6720-3-H Alum Valve Covers, S/B Chevy, Tall, Finned
    CFR Performance HZ-6720-3-H Alum Valve Covers, S/B Chevy, Tall, Finned
    (Part #9116720)
    x
                

    These aluminum valve covers not only look cool, they are the tall design to help with rocker arm clearance. This full-finned holeless design is for use on 1958-1986 Small Block Chevy engines.

    • Holeless
    • Baffled
    • Sold as Pair
    • Polished
    • Tall Style (3-11/16")
    • Full Finned
  • Speedway Chevy Universal Aluminum Radiators
    Speedway Chevy Universal Aluminum Radiators
    (Part #917347)
    x
                

    Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

    These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

    • All-aluminum, furnace-brazed construction
    • No cheap epoxy glue or crimped in gaskets
    • Maximum amount of fins per inch allows greater heat transfer
    • Billet filler necks
    • Available in 22", 24", 28", or 31" widths (measurements include tanks)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

  • GT Performance 11-1121 GT9 Small Ford Oval Horn Button
    GT Performance 11-1121 GT9 Small Ford Oval Horn Button
    (Part #910111121)
    x
                

    This colored Ford Oval emblem horn button is beautifully polished and will highlight any GT9 Wheel with style. This smaller size diameter button shows the 9-bolt pattern for a high tech performance look. GT9 Billet Horn Buttons are machined from 6061 Aluminum and secured using a unique O-ring in a billet base. GT9 buttons are specifically designed for use with GT9 bolt pattern steering wheels. Mounts flush with the surface of the wheel. These horn buttons have a nine bolt mounting pattern and are interchangeable with any standard nine bolt steering wheel.

    • Ford Oval Color Emblem Horn Button
    • Brilliant Polished Finish
    • Machined from 6061 Aluminum
    • Secured Using “Sure-Lock” O-ring Design.
    • Mounts Flush in Wheel. Shows 9-bolt pattern for high tech performance look
    • GT9 horn button is interchangeable with any standard 9-bolt steering wheel

     

  • Bearing-Seal Kit for Two Mustang II Brake Rotors
    Bearing-Seal Kit for Two Mustang II Brake Rotors
    (Part #91031000)
    x
                

    This bearing and seal kit includes two inner wheel bearings, two outer wheel bearings and two inner grease seals. This kit is enough for two brake rotors and is intended to be used with a new rotor installation as this kit does not include the bearing races or cups.

    If your project willl be making use of used rotors, you will require new bearing races or cups.  Therefore you will need to purchase the bearing and seal kit # 910-31052 suggested below in place of kit # 910-31000.

    Works with Mustang II/Pinto and Granada rotors using Mustang II/Pinto spindles only. It will not work for installing Mustang II/Pinto brake rotors on 1949-1954 Chevy spindles. Not for use with early Chevy spindle brake conversion kits.

    -Large Bearing-
    Thickness: .656"
    Upper OD: 1.900"
    Lower OD: 2.150"
    Bearing ID: 1.375"

    -Small Bearing-
    Thickness: .651"
    Upper OD: 1.380"
    Lower OD: 1.570"
    Bearing ID: 0.864"

    Never install new hubs with old bearings.

Filter

"Classic Truck" Page 1 of 50

Page 1 of 50

  • Air Suspension Tubing Male Connector Fitting, 3/8 Inch NPT - 3/8 Tubing
    New
    Air Suspension Tubing Male Connector Fitting, 3/8 Inch NPT - 3/8 Tubing
    (Part #6175007)
    x
                

    When searching for a male connector for your air suspension tubing, look no further. These connector fittings feature copper construction and are for use with straight angle connections with two 3/8 inch fitting ends.

    • Copper construction
    • Straight angle
    • 3/8" NPT to 3/8" tubing
    • For air suspension Nylon tubing
  • System 1 Filtration Short Replacement Filter Element 4 Inch 45 Micron
    New
    System 1 Filtration Short Replacement Filter Element 4 Inch 45 Micron
    (Part #696100360)
    x
                

    By simply replacing and/or cleaning your filter elements regularly, you can avoid costly repairs to your fuel system and ensure peak engine performance. Check out this short 4 inch replacement element from System 1 Filtration.

    • Short 4" replacement element
    • 45 micron 
    • Sold Individually

     

  • Classic Instruments SN35T8 Fuel Sender Tube, 8 Inch, 240-33 OHM
    New
    Classic Instruments SN35T8 Fuel Sender Tube, 8 Inch, 240-33 OHM
    (Part #2751031)
    x
                Classic Instruments Tube Fuel Level Senders are perfect for  applications  where swing arm senders won't fit due to issues with  clearance. These  Tube Fuel Senders also provide a more accurate reading  than swing arm  senders. Compatible with both both gasoline and diesel  fuels. 
    • 240-33 OHM
    • 8 Inch Length 
    • Compatible with both gasoline and diesel
    • Compatible with fuels with up to 10 percent Ethanol
    • Designed to work with any classic fuel level gauge
  • OTB Gear 6500-R/L Finned Fuel Filter R/L
    New
    OTB Gear 6500-R/L Finned Fuel Filter R/L
    (Part #9106501)
    x
                Please view the product's page for more information
            
  • OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
    New
    OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
    (Part #9104660)
    x
                

    This Orbit cast heavy aluminum spun air cleaner from OTB Gear has a truly unique look. The spun shell can be painted or clear coated.

    • Polished casting countersunk into heavy wall satin aluminum spinning
    • Outer shell can be painted or clear coated
    • Washable permanent filter
    • Fits standard 5" four bbl. Carb
    • Diameter 12" - height 4-1/2" 
    • Made in the USA

     

  • Air Suspension Brass Nipple Pipe Fitting, 3/8 Inch NPT
    New
    Air Suspension Brass Nipple Pipe Fitting, 3/8 Inch NPT
    (Part #6175028)
    x
                

    These brass nipple pipe fittings feature two 3/8 inch NPT fitting ends with a straight brass design for use on air suspension systems.

    • Brass construction
    • Straight angle
    • 3/8 inch NPT fitting end A
    • 3/8 inch NPT fitting end B 
  • Fel-Pro Gaskets 1043 S/B Chevy Head Gasket, 4.080 Inch Bore, .039 Thick
    New
    Fel-Pro Gaskets 1043 S/B Chevy Head Gasket, 4.080 Inch Bore, .039 Thick
    (Part #3441043)
    x
                

    This Small Block Chevy head gasket from Fel-Pro is able to provide dependable sealing under strenuous racing conditions. It accommodates high cylinder pressures and cylinder head movement associated with performance engines.

    • Wire ring design in the stainless steel armor surrounding each cylinder gives a highly concentrated seal around the combustion chamber 
    • Raises combustion sealing force to approximately three times that of standard head gaskets
    • Steel wire rings give high combustion seal strength
    • Not intended for use in emission controlled vehicles
    • Do not use on aluminum blocks with liners

    Specs:

    • Engine Family: V8 Small Block
    • Engine Displacement: 262, 265, 267, 283, 302, 305, 307, 327, 350, 400 Engines and Race Engines
    • Volume: 8.9
    • Thickness: .039"
    • Gasket Bore: 4.080"
    • Combustion Seal: Pre-flattened steel wire
    • Application Note: Small chambered aluminum race heads and some Vortec engines - Will not fit conventional OEM-type combustion chambers

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • AVS GAU-200AVS1 Single Needle Air Suspension Gauge, 0-200 psi
    New
    AVS GAU-200AVS1 Single Needle Air Suspension Gauge, 0-200 psi
    (Part #9109011)
    x
                

    AVS Silver Face Single Needle Gauge is one of the best on the market. It features silver gauge face color and black lettering. Full sweep gauge range 0-200 psi.

    • Silver gauge face
    • Black Lettering
    • Dual Needle
    • Dome shaped glass
    • 2.20 inch diameter
    • Full sweep gauge range
    • 0-200 psi
    • 1/8" NPT threads
  • OTB Gear 6505 Smooth Fuel Filter, Satin, Right-to-Left Fuel Flow
    New
    OTB Gear 6505 Smooth Fuel Filter, Satin, Right-to-Left Fuel Flow
    (Part #9106505)
    x
                

    Finally there are fuel filters that are not only functional, but good looking as well! The OTB Gear smooth fuel filter is a permanent washable stainless mesh filter that will last a lifetime! Fuel flows right to left.  

    • Show quality
    • Right to left fuel flow
    • Permanent washable stainless filter 
    • Utilizes compact ORB/AN-6 fittings 
    • Compact, functional, good looking
    • Smooth Style
    • Made in USA

    Specs:

    • Very compact in size, the bowl is 2.4" in diameter
    • Total height and width are 4-1/4" and projection from surface is 3"
    • Inlet and outlet ports utilize ORB/AN-6 fittings to reduce the bulk of hose connections
    • Drilled for 5/16" mounting hardware - (not included)
    • 100 Micron

     

  • Fragola 231507 150 Degree Adapter Hose End Fitting, -6 AN to -8 AN
    New
    Fragola 231507 150 Degree Adapter Hose End Fitting, -6 AN to -8 AN
    (Part #617231507)
    x
                
    This 150 degree Fragola hose fitting adapter allows you to connect a -6 AN hose to a -8 AN female fitting. Constructed from a high quality aluminum and features a red/blue andodized finish for a product that both looks and performs great. Works with a stainless or nylon braided hose.
    • 150 Degree
    • Aluminum Construction
    • Red/Blue anodized finish
    • Adapts -6 AN hose to -8 AN female fitting
    • -8 AN female fitting inlet
    • -6 AN hose outlet
    • Works with stainless or nylon braided hose 
  • Clayton Machine TA-202 Elliptical Throttle Pedal
    New
    Clayton Machine TA-202 Elliptical Throttle Pedal
    (Part #231048)
    x
                

    This elliptical throttle pedal from Clayton Machine has drilled I-beam arms. It also features durable chrome plating that never requires polishing.

    • Drilled I-beam arms
    • Durable chrome plating (never needs polishing)
    • Molded rubber pad
    • Clean “inline” styling
    • Fully adjustable arm with a spring loaded pedal
    • Dimensions: 12” tall, 1.5” wide

     

  • Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    New
    Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    (Part #6172245091)
    x
                
    This black 45 degree Fragola hose fitting adapter allows you to connect a -8 AN hose to a -10 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.
    • Aluminum Construction
    • Black anodized finish   
    • 45 Degree 
    • Adapts -8 AN hose to -10 AN fitting   
    • -10 AN Fitting Inlet   
    • -8 AN Hose Outlet  
  • Air Suspension Brass Male Run Tee Fitting, 3/8 Inch NPT
    New
    Air Suspension Brass Male Run Tee Fitting, 3/8 Inch NPT
    (Part #6175019)
    x
                

    These brass male run tee fittings connect and branch three 3/8" NPT threaded fittings. These brass T-shaped fittings feature one male and two female ends.  They are for use on air suspension systems and air line tube connections.

    • Brass construction
    • 3/8" NPT fitting end A
    • 3/8" NPT fitting end B
    • 3/8" NPT fitting end C
  • Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
    New
    Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
    (Part #2751034)
    x
                

    Classic Instruments Tube Fuel Level Senders are perfect for applications where swing arm senders won't fit due to issues with clearance. These Tube Fuel Senders also provide a more accurate reading than swing arm senders. Compatible with both both gasoline and diesel fuels.

    • 240-33 OHM
    • 11 Inch Length 
    • Compatible with both gasoline and diesel
    • Compatible with fuels with up to 10 percent Ethanol
  • Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
    New
    Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
    (Part #91050305)
    x
                

    Check out this 6-switch Rocker circuit breaker panel from Painless Performance. It features color coded lighted rocker switches, 18 feet of TXL wire, vibration resistant terminals and a black finish for reduced glare.

    • Features circuit breakers in place of standard fuses
    • Panel controls: Start, ignition, fuel pump, electric fan/water pump and 2 accessories
    • Made in the USA

    Assembly Instructions (PDF)

  • GT Performance 54-5717 GT3 Autocross II Pro-touring Wood Steering Wheel
    New
    GT Performance 54-5717 GT3 Autocross II Pro-touring Wood Steering Wheel
    (Part #910545717)
    x
                

    This GT3 Autocross II Pro-Touring wood steering wheel from GT Performance pays tribute to a timeless performance design and elevates it to the next level. GT Performance did this by featuring a special tiered spoke design with lightening holes and fastened using unique aircraft grade rivets. This wheel has a three-bolt mounting pattern and is interchangeable with any standard three bolt hub or horn button.

    • Aluminum spoke construction
    • Special tiered spoke design
    • Fastened using unique aircraft grade rivets
    • Genuine hand rubbed stained mahogany rim with sculpted finger grips and sealed with a polyurethane clear coat for a protected gloss finish
    • Modular construction design allows for removal of the grip for custom painting to match your vehicles interior perfectly
    • 3-bolt mounting pattern, can be used with any GT3 installation hubs and GT3 horn buttons
    • This 3-bolt mounting pattern is interchangeable with any standard 3-bolt hub or horn button
    • Diameter: 15″ Dish: 2″
    • Made in the USA

    Frequently Asked Questions (PDF)  

    GT3 Steering Wheel Hub Applications (PDF)

  • Fragola 231807-BL 180 Degree Adapter Hose End Fitting, -8 AN to -6 AN
    New
    Fragola 231807-BL 180 Degree Adapter Hose End Fitting, -8 AN to -6 AN
    (Part #6172318071)
    x
                

    This black 180 degree Fragola hose fitting adapter allows you to connect a -6 AN hose to a -8 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.

    • Aluminum Construction
    • Black anodized finish
    • 180 Degree
    • Adapts -6 AN hose to -8 AN fitting
    • -8 AN Fitting Inlet
    • -6 AN Hose Outlet 
    To learn more about our AN fittings, be sure to check out our tech articles; Fasteners - Brake, AN and Pipe Thread Fittings  and
    How to Assemble Push-On Hose Ends                                                                                           &nbs
  • Fragola 231813 180 Degree Adapter Hose End Fitting, -16 AN to -12 AN
    New
    Fragola 231813 180 Degree Adapter Hose End Fitting, -16 AN to -12 AN
    (Part #617231813)
    x
                

    This 180 degree Fragola hose fitting adapter allows you to connect a -16 AN hose to a -12 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature a red/blue anodized finish for a product that both looks and performs great. Works with a steel braided hose.

    • 180 Degree
    • Red/Blue anodized finish
    • Aluminum Construction
    • Adapts -16 AN hose to -12 AN fitting 
    • Works with steel braided hose

     

  • Fragola 2312151 120 Deg. Adapter Hose End Fitting, -12 AN to -16 AN
    New
    Fragola 2312151 120 Deg. Adapter Hose End Fitting, -12 AN to -16 AN
    (Part #6172312151)
    x
                

    Fragola's 120 degree adapter hose ends offer a black anodized finish and eliminate the permeation issues common with aftermarket racing hose. This adapter adapts -12 AN hose to -16 AN female fitting.

    • 120° hose end fitting
    • Aluminum construction
    • Black anodized finish
    • Adapts -12 AN hose to -16 AN female fitting
  • Coker Tire 639750 Firestone Bias Ply Blackwall Tire, 550-16
    New
    Coker Tire 639750 Firestone Bias Ply Blackwall Tire, 550-16
    (Part #639750)
    x
                

    This bias-ply Firestone tire from Coker Tires is made in the original molds to maintain authenticity. Each tire is made in the USA so you can trust that each tire has been tested for quality as well as durability.

    • Tread Width: 4.25
    • Section Width: 6.06
    • Overall Diameter: 27.36
    • Load Index: No
    • Speed Rating: No
    • Max Load Capacity: 840@32PSI
    • Rim Width: 3.25 - 4.00
    • Tube Type or Tubeless: Tube Type

    Be sure to choose the correct tire by referring to our Speedy Tip; Tire Size Guide Chart. (PDF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 50