Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck Electrical Wiring & Lights At Speedway Motors

Speedway Motors is your one stop shop for Classic Truck wiring and lighting. Make wiring your truck simple with easy-to-use wiring harnesses and step by step instructions. Finish off your classic pickup with specialty headlights, LED dome lights, and LED blue dot tail lights. Find anything from various switches, sensors and relays to hidden radio antennas on the online catalog and let Speedway Motors eliminate any and all of your Classic Truck electrical system problems!

"Classic Truck, Switches" Page 1 of 2

  • Lokar SG-6009 Chrome Dimmer Switch Cover, Chevy/Ford
    Lokar SG-6009 Chrome Dimmer Switch Cover, Chevy/Ford
    SKU-4916009
    x
                Brighten up that old dimmer switch with one of these new dimmer switch covers from Lokar!  Made from steel and feature a beautiful chrome finish and a textured rubber pad. 
            
  • Stewart Warner 279B-F Deluxe Electrical Oil Pressure Sender
    Stewart Warner 279B-F Deluxe Electrical Oil Pressure Sender
    SKU-665279B
    x
                

    Designed to make sure that you get fast, accurate information from your Stewart Warner gauges. 

    • 1/8-27 NPT
    • Electrical
    • Designed to be used with 90° sweep gauges
  • Lokar XBAG-6109 Midnight Series Oval Billet Aluminum Dimmer Cover
    Lokar XBAG-6109 Midnight Series Oval Billet Aluminum Dimmer Cover
    SKU-491XBAG6109
    x
                
    • Oval Billet Aluminum Dimmer Cover – Brushed
    • Black Anodized Billet Aluminum 
    • Made In The U.S.A.

     

  • Safety Kill Switch
    $19.99
    Product Rating: 4.50 Stars
    Safety Kill Switch
    SKU-91364384
    x
                

    This is the best kill switch we've found! Works with standard ignition only. Water resistant with O-ring shaft seal. Pull on, push off with silver contacts.

    20 amp rating at 12 VDC.

  • Universal Headlight Switch With Hi/Low
    Universal Headlight Switch With Hi/Low
    SKU-91080154
    x
                

    This headlight switch has four positions. In is off, out one notch is park lights, out another notch is lows beams, and all the way out is high beams. Screw type terminals. 3/8" mounting hole.

    910-80154 Instructions (PDF) 

  • MSD 8812 Universal, Push Button, Alt. Action Switch
    New
    MSD 8812 Universal, Push Button, Alt. Action Switch
    SKU-5478812
    x
                This switch is designed to be used as an auxiliary ignition On/Off but�ton. It can be mounted to the steering wheel within easy reach of the driver and can be used in a Normally Open or Normally Closed position. Assembled and constructed for harsh racing conditions.

    Installation Instructions (PDF)

    • Universal Electric Window Switch
      Universal Electric Window Switch
      SKU-9100679
      x
                  
      • Fits All Vehicles
      • Includes 5 Shafts to Fit All Window Cranks
      • 15 Degrees Up Or Down Activates The Switch
      • Billet Aluminum
      • Dead Lock Stop Design Will Not Break
      • Works With All Power Window Systems
      • Ultra Thin Design
      • Designed In The USA
      • Manufacturer Lifetime Warranty
      • Smallest System On The Market
      Instructions (PDF)
    • Turn Signal Switch
      $19.99
      Product Rating: 4.18 Stars
      Turn Signal Switch
      SKU-91062850
      x
                  

      For early autos not equipped with right and left turn signals. Chrome plated finish. Switch works with 6 or 12 volt systems. Includes wiring diagram. Clamps to any steering column.

      Does not have four-way flashers and does not self cancel.

      You will need to purchase a three-prong flasher to use with this switch. Our part number is 910-64046. If using LED flashers, an adapter will be needed (see Notes).

      910-62850 Wiring Diagram (pdf)

    • Universal Windshield Wiper Switch for Single Motor
      Universal Windshield Wiper Switch for Single Motor
      SKU-91064056
      x
                  

      These easy-to-use universal windshield wiper switches feature OFF/PARK, LOW and HIGH and are for use with single motor wiper set-ups.

      • 3-position switch 
      • Requires a 7/16" mounting hole
      • (4) blade style terminals

      910-64056 Instructions (PDF)

    • Lokar XBAG-6006 Midnight Series Billet Dimmer Switch Cover w/Rubber
      Lokar XBAG-6006 Midnight Series Billet Dimmer Switch Cover w/Rubber
      SKU-491XBAG6006
      x
                  

      Ball-milled aluminum throttle pedal has spring-loaded pad like OEM design. Removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.

      • Lokar's exclusive upper arm is a one-piece design.
      • Shaft and arm are one piece, requiring no pins.
      • Matching brake pad is designed with a 1/2 - 20 thread and includes a 1/2 - 20 stud in kit.
      • Can be mounted centered or off center.
      • Dimmer fits both Chevy and Ford. 
    • Four Post Battery Disconnect Switch
      Four Post Battery Disconnect Switch
      SKU-91064501
      x
                  

      Battery disconnect switch for safety and theft protection. Required for use with alternator cutoff by NHRA. Battery shut off switch can be remote mounted or where specified for saftey and convenience. This battery kill switch featues a die cast lever.

      Rated at 180 amp continuous, 1000 amp instantaneous.

      910-64501 Instructions (PDF)

    • Universal Mechanical Brake Light Switch
      Universal Mechanical Brake Light Switch
      SKU-91031306
      x
                  

      Our mechanical brake light switch is "closed" in the at rest position. It breaks the circuit when pushed. Mounts near your brake pedal and the arm can be bent as needed. 42 amp max rating.

      Use for your street rod, truck, or muscle car!

    • DPDT Momentary Toggle Switch
      $14.99
      DPDT Momentary Toggle Switch
      SKU-91364382
      x
                  

      Universal heavy duty 3-position momentary toggle switch. Features a nickel-plated brass switch, phenolic housing, and plated steel cap. Rated at 25A at 12V, 15A at 24V, and 10A at 36V DC.

      • Mounting Stem:  15/32" -32 thread, 15/32" long, and fits panels up to 9/32"
      • Six Screw Terminals:  6-32 screws
      • Electrical Rating:  25A at 12V, 15A at 24V, and 10A at 36V DC

      Works great as a linear actuator switch!

      Note: Up=Momentary On, Center=Off, Down=Momentary On.

    • Universal Windshield Wiper Switch for Dual Motors
      Universal Windshield Wiper Switch for Dual Motors
      SKU-91064057
      x
                  

      These easy-to-use universal windshield wiper motor switches feature OFF/PARK, LOW and HIGH and are for use with dual motor wipers.

      • 3-position switch 
      • Requires a 7/16" mounting hole
      • (6) blade style terminals
      • Knob shaft is 3/16"

      910-64057 Instructions (PDF)

    • Double Throw Toggle Switch with Boot
      Double Throw Toggle Switch with Boot
      SKU-91064015
      x
                  

      Single pole, double throw. On-On configuration. Plastic housing with steel plate. Rubber boot protects switch from dirt and moisture. This toggle switch requires a 1/2" hole to mount it.

      • Three terminals
      • Two toggle positions
      • Rated for 25 amps at 12 volts DC

       

    • Universal Pull-Type Ignition Switch
      Universal Pull-Type Ignition Switch
      SKU-91064053
      x
                  

      This unique switch looks like a headlight switch, but is actually your ignition switch. Pull this 3 position switch all the way out and it starts your car. Spring loaded switch then returns to the running position. Push in the switch to shut your engine off.

      Rating @ 12 Volt:
      • Accessory = 10 amps
      • Ignition = 5 amps
      • Start = 5 amps

      Screw type terminals, 3/8" mounting hole.

      Pull-Type Ignition Switch Instructions (PDF)

    • Painless Wiring 80529 Ignition Switch
      Painless Wiring 80529 Ignition Switch
      SKU-91012209
      x
                  

      Panel mount switch with Off/On/Start positions. Rated at 20 amps. Also features a waterproof outer lock nut.

      • Switch positions:
        • Accessory - Left
        • Lock/Off - Center
        • On - Right
        • Start - Far Right
      • Red lead = power-in
      • Pink lead = power to coil/ignition 
      • Purple lead = power to starter soleniod
      • Brown lead = power to accessories/circuits

      Ignition Switch Wiring Instructions (PDF)

    • Dimmer Switch Pigtail Connector
      Dimmer Switch Pigtail Connector
      SKU-91064055
      x
                  Use this pigtail connector with our universal dimmer switch (91064054).  Has three 16AWG wire leads 12" long.
              
    • Universal Headlight Switch
      $11.99
      Product Rating: 4.75 Stars
      Universal Headlight Switch
      SKU-91064051
      x
                  

      This universal 3-position headlight switch features Off, Park, and Headlight/tailight. Screw type terminals. 7/16" mounting hole.

      Has a 15 amp per circuit rating at 12 volts.

      Universal Headlight Switch Instructions (PDF)

    • Lokar BAG-6171 Lakester Steel Dimmer Switch Cover, Raw Steel Finish
      Lokar BAG-6171 Lakester Steel Dimmer Switch Cover, Raw Steel Finish
      SKU-491BAG6171
      x
                  
      • Matches Lakester Throttle/Brake Pedal Sets
      • Nostalgia Styling
      • Splined Arms For Full 360 deg. Fine Adjustment
      • Hidden Set Screws
      • Made In The U.S.A.
    • Universal Ignition Switch
      $14.99
      Product Rating: 4.86 Stars
      Universal Ignition Switch
      SKU-91064052
      x
                  

      This universal, 4 position ignition switch features ACC, OFF, IGN/ACC, and IGN/START. Screw type terminals. 3/4" mounting hole and 2 keys included.

      • Requires 2-3/8" of space behind dash for clearance
      • Fits 3/4" to 7/8" hole
      • Terminals: 4 screw
      • Actuators: coded tumbler lock, 2 keys
      • Sealed terminal insulator: no
      • O-ring seal in stem: no
      • Ground terminal: no
      • Mounting stem: 3/4"-20
      • Case material: diecast zinc
      • Mounting panel thickness: 3/8"
      • Amperage ratings (current ratings at 12V DC)
        •  Accessory: 10A
        • Ign/Run: 10A
        • Start: 5A
    • Heidts PS-101 Adjustable Power Steering Valve
      Heidts PS-101 Adjustable Power Steering Valve
      SKU-91032923
      x
                  

      If you have power steering on your car and it has too much assist or a 'twitchy' feel to it you may have too much pressure to the rack or box. 

      This nifty valve allows you to adjust the pressure and get the road feel you want. It has a 1/4" npt inlet and outlet for the pressure line, and a 3/8" npt inlet and outlet for the return line. 

      Both pressure and return line need to be plumbed into this valve. 

      910-32923 Instructions (pdf)

    • Push Button Starter Switch
      $5.99
      Product Rating: 4.83 Stars
      Push Button Starter Switch
      SKU-91364381
      x
                  

      Momentary switch has rubber boot which protects switch from moisture. Easy install to give any classic car that hot rod feel. Features a high quality die cast zinc housing with brass terminals.

    • Lokar BAG-6109 Oval Billet Aluminum Dimmer Cover, Brushed
      Lokar BAG-6109 Oval Billet Aluminum Dimmer Cover, Brushed
      SKU-491BAG6109
      x
                  
      • Ball-milled aluminum throttle pedal has spring-loaded pad like OEM design. Removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket. Lokar's exclusive upper arm is a one-piece design. Shaft and arm are one piece, requiring no pins. Matching brake pad is designed with 1/2 x 20 thread and includes a 1/2 x 20 stud in kit. Can be mounted centered or off center. Dimmer fits both Chevy and Ford.
      • Matches All Mini Oval/Standard Oval
      • Or XL Oval Throttle And Brake Pads
      • Made In The U.S.A.
      • Lifetime Warranty
    • Stewart Warner 279-A Sender for Wings Oil Pressure Gauge
      Stewart Warner 279-A Sender for Wings Oil Pressure Gauge
      SKU-665279A
      x
                  

      For use with single gauge, standard pipe thread 1/8". Includes adapter for 1/4".

      • 80 psi pressure
      • 240 ohms resistance
    • Painless Wiring 80174 Pressure Brake Switch with Pigtail, 1/8 NPT
      Painless Wiring 80174 Pressure Brake Switch with Pigtail, 1/8 NPT
      SKU-91031307
      x
                  

      Pressure brake switch has 1/8" male NPT threads. For inline installation of this switch, use one of the corresponding tee fittings. This is a standard normally open switch that closes when actuated, at 60-100 psi.

    • Lokar BL-1400U Neutral Safety Switch or Back-Up Light Switch Kit
      Lokar BL-1400U Neutral Safety Switch or Back-Up Light Switch Kit
      SKU-4911400
      x
                  

      This switch kit is designed to be used with a Lokar shifter and can be set up as either a neutral safety switch or a back-up light switch with a little creativity.  It can be adapted to most any application.

      Neutral Safety Switch Installation Instructions (PDF)  

    • Lokar XBAG-6003 Midnight Series Billet Dimmer Switch Cover w/Rubber
      Lokar XBAG-6003 Midnight Series Billet Dimmer Switch Cover w/Rubber
      SKU-491XBAG6003
      x
                  Ball-milled aluminum throttle pedal has spring-loaded pad like OEM design. Removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket. Lokar's exclusive upper arm is a one-piece design. Shaft and arm are one piece, requiring no pins. Matching brake pad is designed with 1/2 x 20 thread and includes a 1/2 x 20 stud in kit. Can be mounted centered or off center. Dimmer fits both Chevy and Ford.
      • Billet Aluminum Dimmer Switch Cover
      • Made In The U.S.A.
      • Lifetime Warranty
    • Lokar BAG-6170 Lakester Chromed Steel Dimmer Switch Cover
      Lokar BAG-6170 Lakester Chromed Steel Dimmer Switch Cover
      SKU-491BAG6170
      x
                  
      • Chromed Steel Dimmer Switch Cover
      • Made In The U.S.A.
      • Lifetime Warranty
    • Lokar BAG-6006 Billet Aluminum Dimmer Switch Cover w/Rubber, Brushed
      Lokar BAG-6006 Billet Aluminum Dimmer Switch Cover w/Rubber, Brushed
      SKU-491BAG6006
      x
                  
      • Ball-milled aluminum throttle pedal has spring-loaded pad like OEM design. Removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket. Lokar's exclusive upper arm is a one-piece design. Shaft and arm are one piece, requiring no pins. Matching brake pad is designed with 1/2 x 20 thread and includes a 1/2 x 20 stud in kit. Can be mounted centered or off center. Dimmer fits both Chevy and Ford.
      • Billet Aluminum Dimmer Switch Cover
      • Made In The U.S.A.
      • Lifetime Warranty
    • Brake Light Switch with 3/8 Inch IFM Adapter Fitting
      Brake Light Switch with 3/8 Inch IFM Adapter Fitting
      SKU-91031304
      x
                  

      This brake light switch has a 3/8"-24 IFM thread so you can screw it right into an inverted flare brake fitting.

      • Designed to be installed into a 3/8"-24 inverted flare female fitting
      • Switch has two 1/4" wide male spade terminals
      • 3/8"-24 IFM thread adapter included
      NOTE:   If using residual valves in conjunction with this switch, we recommend installing the switch in-line before the residual valves.
    • Pressure Brake Switch, 1/8 NPT
      Pressure Brake Switch, 1/8 NPT
      SKU-91031305
      x
                  

      Pressure brake switch has 1/8" male NPT threads. For inline installation of this switch, use one of the corresponding tee fittings. This is a standard normally open switch that closes when actuated, at 60-100 psi.

    • Perma-Cool 18899 Inline 185 Degree Thermoswitch, -6 AN
      Perma-Cool 18899 Inline 185 Degree Thermoswitch, -6 AN
      SKU-57318899
      x
                  These thermoswitches feature an easy 2 wire hook up which make for a simple way to trigger an electric fan.  They are designed for use with Perma-Cool Maxi-Cool Jr. coolers with -6 AN male fittings.
      • Activates electric fan on at 185°F off at 165°F.
      • 15 Amp Maximum
      • -6 AN male/female
      • No relay needed

      18899 Installation Instructions (PDF)

    • Lokar BAG-6003 Billet Alum Dimmer Switch Cover, Ball-Milled, Brushed
      Lokar BAG-6003 Billet Alum Dimmer Switch Cover, Ball-Milled, Brushed
      SKU-491BAG6003
      x
                  
      • Ball-milled aluminum throttle pedal has spring-loaded pad like OEM design. Removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket. Lokar's exclusive upper arm is a one-piece design. Shaft and arm are one piece, requiring no pins. Matching brake pad is designed with 1/2 x 20 thread and includes a 1/2 x 20 stud in kit. Can be mounted centered or off center. Dimmer fits both Chevy and Ford.
      • Brushed Billet Aluminum Dimmer Switch Cover
      • Made In The U.S.A.
      • Lifetime Warranty
    • Heavy Duty Turn Signal Switch
      Heavy Duty Turn Signal Switch
      SKU-91062860
      x
                  

      For early autos not equipped with right and left turn signals. Chrome plated finish. Switch works with 6 or 12 volt systems. Includes wiring diagram. Clamps to any steering column with included stainless hose clamp. Switch has four-way flashers and does not self cancel.

      You will need to purchase a three-prong flasher to use with this switch (part number 910-64046). For LED light applications, you will also need a LED dummy load resistor (part number 910-03030).

      910-62860 Instructions (PDF)

    • Lokar S-68154 Neutral Safety Switch or Back-Up Light Switch Only
      Lokar S-68154 Neutral Safety Switch or Back-Up Light Switch Only
      SKU-49168154
      x
                  This switch is designed to be used with a Lokar shifter and can be set up as either a neutral safety switch or a back-up light switch.
              
    • Classic Instruments SN57F Ford Oil Pressure Sender Bushing Kit Adaptor
      Classic Instruments SN57F Ford Oil Pressure Sender Bushing Kit Adaptor
      SKU-2751026
      x
                  Classic Instruments' brass angled-bushing kits allow for easy installation on most Ford engines. 

      The Oil Pressure Sender will not clear either the back of the intake manifold or the distributor body on many installations unless the Bushing Kit is used.

      • Bushing kit to install oil pressure sender
      • Ford applications
    • Two Post Battery Disconnect Switch
      Two Post Battery Disconnect Switch
      SKU-91064500
      x
                  Remote battery disconnect switch for safety and theft protection. A battery kill switch is required for use with alternators by the NHRA. Battery shut off switch can be remote mounted or where specified for saftey and  convenience.
      • 180 amp continuous, 1000 amp instantaneous
      • Die cast lever
      • Fits panel through 3/16" thick

      910-64500 Instructions (PDF)

    • Electric Fan Sensor, 3/8 NPT
      $15.99
      Product Rating: 5.00 Stars
      Electric Fan Sensor, 3/8 NPT
      SKU-91064019
      x
                  

      This trick electric fan switch is a normally open temperature switch with 3/8" NPT male threads that screws into your intake manifolds water passage. When the coolant reaches 185°-215°, the contacts on the cooling fan switch close, activating a relay which directs current to your electric fan. When the engine cools, the contacts on the fan relay switch open, and the fan stops automatically. This radiator fan switch arrangement is not adjustable, but is more rugged than other temperature fan switch setups.

      NOTE: This thermal fan switch must be used with a fan relay. If installed as a gounding fan switch, it will burn out. We suggest using this temperature fan switch with our relay 910-64044. Make sure the fan switch is mounted in the manifold or radiator tank so that the bulb is submerged in the HOT engine coolant.

      910-64019 Instructions (PDF)

    • Lokar XSG-6009 Midnight Series Steel Dimmer Switch Cover, Chevy/Ford
      Lokar XSG-6009 Midnight Series Steel Dimmer Switch Cover, Chevy/Ford
      SKU-491XSG6009
      x
                  Lokar's Steel Throttle Pedals are the first spring-loaded steel pedal in the industry and designed after OEM pedals. Removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.
      • Lokar offers these steel assemblies in both our standard pad size and our larger, XL pad.
      • The XL pad is EXTRA  LARGE for those seeking more substance under foot.
      • Matching Steel Brake Pads mount with a 1/2 - 20 stud built into the back of the pad.
      • Matching Dimmer Switch Cover fits both Chevy and Ford.
    Goto Previous PagePrevious Page
    1 2