Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck Suspension At Speedway Motors

Speedway Motors is your number one source for Classic Truck suspension components! Speedway stocks a huge inventory of suspension parts, plus shocks from AFCO and Bilsein, truck springs, rear lowering springs and other specialized components you need to finish any classic pickup suspension project. You can improve the ride of your classic truck with Speedway’s selection of control arms, coilover springs, heim rod ends or complete suspension kits. We also offer the best in air ride setups and coilover kits too!

Featured Products
Mustang II 2 Inch Dropped Steel Spindles
Mustang II 2 Inch Dropped Steel Spindles
SKU-91034304
x
            

Our Mustang II spindles are constructed from 1045 heat-treated alloy steel. Retains absolute stock factory geometry and uses all stock rotors, bearings, calipers, etc., making it easy to install.

Note: If using OEM caliper brackets, slight modification of the spindle and/or the caliper bracket is required. (Additional clearance between the spindle and caliper bracket is required.)

910-34304 Instructions (PDF)

 


 

Mustang II IFS, Standard Tubular Control Arms, Stock Springs and Spindles
Mustang II IFS, Standard Tubular Control Arms, Stock Springs and Spindles
SKU-91034202
x
            

Includes standard upper and offset strutless lower control arms, new standard spindles, rubber brake lines, new black stock type springs and shocks, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.

  • Works with all Speedway and Heidts crossmembers 
  • Kit Includes:
    • Standard Tubular Upper and Lower Strutless Control Arms
    • New Stock Spindles, Springs, and Shocks
    • Rack and Pinion with bushings and tie rods
    • 11" brake kit with GM calipers
  1. Add proper crossmember to complete kit.

Spring Rate Chart (Link)

Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2" frame widths, you will be required to purchase 2" Inner Tie Rod Extensions (91034345) or (91034346).

 

Mustang II IFS, Std. Tubular Control Arms, Coilover Springs, Stock Spindles
Mustang II IFS, Std. Tubular Control Arms, Coilover Springs, Stock Spindles
SKU-91034206
x
            Hub-to-hub kit includes standard upper and offset strutless lower control arms, new standard spindles, rubber brake lines, Carrera coilovers, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
  • Works with all Speedway and Heidts crossmembers 
  • Kit Includes:
    • Standard Tubular Upper and Lower Strutless Control Arms
    • New Stock Spindles
    • Coilover Springs
    • Rack and Pinion with bushings and tie rods
    • 11" brake kit with GM calipers
  1. Add proper crossmember to complete kit.

Spring Rate Chart (Link)

Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2" frame widths, you will be required to purchase 2" Inner Tie Rod Extensions (91034345) or (91034346).

TCI 1948-56 Ford Pickup Rear Leaf Spring Kit
TCI 1948-56 Ford Pickup Rear Leaf Spring Kit
SKU-91041248
x
            

Improve the ride, handling and stance of your classic truck with a new rear leaf spring kit. These kits are desgined to lower your truck 4-inches from stock and provide a smoother ride. Spring hangers and shock crossmember bolt on; axle pads are weld-on. Kits include leaf springs, brackets, shock kit, mounting and instructions.

910-41248 Instructions (PDF)

"Classic Truck, Suspension" Page 1 of 25

  • AFCO 23600CR 10 Inch Extreme Chrome Coil-Over Spring, 600 Rate
    AFCO 23600CR 10 Inch Extreme Chrome Coil-Over Spring, 600 Rate
    SKU-10623600CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • Heidts SB-012 Sway Bar Bracket Kit for Tubular Full Lower Control Arms
    New
    Heidts SB-012 Sway Bar Bracket Kit for Tubular Full Lower Control Arms
    SKU-413012
    x
                

    This stabilizer bar bracket kit from Heidts is for tubular full lower A-Arms. These brackets bolt onto the control arms for a quick and simple installation. These brackets will only work on strut-less style control arms designed for stock coil springs. They will not bolt onto a coil over type arm as most of those do not have a plate in the center of them to bolt anything onto them.

    • Steel Construction
    • Hardware Included
    • Sold as Kit
    • Natural Finish

    Installation Instructions (PDF)

     

  • 3/8 X 3/8 Clevis
    $7.99
    3/8 X 3/8 Clevis
    SKU-6680116
    x
                The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115). 
            
  • Spindle Nuts for Mustang II Spindle
    Spindle Nuts for Mustang II Spindle
    SKU-91631936
    x
                

    These spindle nuts are for your Mustang II Spindle. They are a combination of a castle nut and a washer.

    • Includes Cotter Pin
    • Sold as Pair
    • Combination of castle nut and washer
  • QA1 COM8T-102PK 1 Inch Bearing Kit
    QA1 COM8T-102PK 1 Inch Bearing Kit
    SKU-2558102
    x
                Kit Includes:     
    • (2) Steel Spherical Bearings
      • 0.5" I.D.
      • 1.0" O.D.
      • 1.0" Wide
    • (4) Snap Rings
  • 1965-72 Chevy Pickup Rear Lowering Kit
    1965-72 Chevy Pickup Rear Lowering Kit
    SKU-91006575
    x
                

    This kit does it all! It lowers your truck 5", Corrects the shock angle so shocks work correctly, AND centers the rear axle. (All this is recommended when lowering 5" or more.) Includes 5" drop springs and shocks, deluxe trac bar, hardware and shock relocation kit.

    Note: C-notch required. Coils come black powder coated. 

  • AFCO 23500CR 10 Inch Extreme Chrome Coil-Over Spring, 500 Rate
    AFCO 23500CR 10 Inch Extreme Chrome Coil-Over Spring, 500 Rate
    SKU-10623500CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • AFCO 22375CR 12 Inch Extreme Chrome Coil-Over Spring, 375 Rate
    AFCO 22375CR 12 Inch Extreme Chrome Coil-Over Spring, 375 Rate
    SKU-10622375CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • AFCO 28300-1CR 8 Inch Extreme Chrome Coil-Over Spring, 300 Rate
    AFCO 28300-1CR 8 Inch Extreme Chrome Coil-Over Spring, 300 Rate
    SKU-106283001CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • TCI 1937-1953 1/2 Ton Chevy Pickup Rear Leaf Spring Kit, 3100 Series
    TCI 1937-1953 1/2 Ton Chevy Pickup Rear Leaf Spring Kit, 3100 Series
    SKU-91043237
    x
                

    Improve the ride, handling and stance of your classic truck with a new rear leaf spring kit. These kits are desgined to lower your truck 4-inches from stock and provide a smoother ride. Spring hangers and shock crossmember bolt on; axle pads are weld-on. Kits include leaf springs, brackets, shock kit, mounting and instructions.

    Chevy Pickup Rear Leaf Spring Installation Instructions (PDF)

  • FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    SKU-1750716
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/8" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • 1960-72 Chevy Pickup Rear Lowering Block Kit, 2 Inch
    1960-72 Chevy Pickup Rear Lowering Block Kit, 2 Inch
    SKU-91000042
    x
                This is an easy and inexpensive way to lower your truck without affecting ride quality. Kits include aluminum blocks and new u-bolts.
            
  • Sway Bar End Link Kit, 5 Inch
    $11.99
    $18.99
    New
    Sway Bar End Link Kit, 5 Inch
    SKU-113016
    x
                

    These sway bar end link kits come with all necessary hardware for a successful installation. They are designed with durable polyurethane bushings and steel material so you know that you are getting a quality kit.

    • Sold as Kit
    • 5" bushing to bushing working length, 8" overall length
    • Polyurethane Bushings
    • Hardware Included

     


  • AFCO 27300-1CR 7 Inch Extreme Chrome Coil-Over Spring, 300 Rate
    AFCO 27300-1CR 7 Inch Extreme Chrome Coil-Over Spring, 300 Rate
    SKU-106273001CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • AFCO 23250CR 10 Inch Extreme Chrome Coil-Over Spring, 250 Rate
    AFCO 23250CR 10 Inch Extreme Chrome Coil-Over Spring, 250 Rate
    SKU-10623250CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. This new mirror finish spring line has all the great looks of a chrome spring with no damaging side-effects associated with chemical plating.

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter
    • 3-3/8" outside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • 1971-72 Chevy Pickup Front End Rebuild Kit
    1971-72 Chevy Pickup Front End Rebuild Kit
    SKU-91007172
    x
                Want to make your truck handle like new? Installing one of our complete front end rebuild kits will help. These kits include upper and lower ball joints, inner and outer tie rod ends, tie rod adjusting sleeves, an idler arm and a poly sway bar bushing kit. Kit contents may vary.
            
  • AFCO 22400CR 12 Inch Extreme Chrome Coil-Over Spring, 400 Rate
    AFCO 22400CR 12 Inch Extreme Chrome Coil-Over Spring, 400 Rate
    SKU-10622400CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • AFCO 28500-1CR 8 Inch Extreme Chrome Coil-Over Spring, 500 Rate
    AFCO 28500-1CR 8 Inch Extreme Chrome Coil-Over Spring, 500 Rate
    SKU-106285001CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • AFCO 5/8 Inch Shock Bearing with Clip
    AFCO 5/8 Inch Shock Bearing with Clip
    SKU-1080
    x
                Mid-to-heavyweight cars can destroy a rubber mount bushing in no time.  Instead, use spherical bearings which don't compress and allow operation  at far greater mounting angles. Works with AFCO 5/8" bearing end  shocks.                               
    • 5/8" I.D.
    • 1/2" wide
    • Includes bearing and retainer clip
  • Aluminum Heim Rod End Reducer, 3/4 Inch Bore to 5/8 Bolt
    Aluminum Heim Rod End Reducer, 3/4 Inch Bore to 5/8 Bolt
    SKU-91004110
    x
                
    • Used to reduce rod end bore
    • Reducers fit entirely in the rod end ball
  • Front Shock Rubber Bushing Kit
    Front Shock Rubber Bushing Kit
    SKU-91032119
    x
                
    • Includes bushing, 3/8" nut and washers
    • For stud style front shocks
  • Long Coil-Over Shock Mount Support
    From: $18.99
    Long Coil-Over Shock Mount Support
    SKU-91636011
    x
                

    Speedway offers this fully engineered shock mount. The 5/8" forged button head bolt looks good while offering maximum support.  The 1-3/4" x 1-3/4" billet aluminum support spacer has internal threads. This allows you to properly support this shock without crushing the bushing like others do, which leads to shock failures. There's a reason major chassis builders use this mount.

    • Billet aluminum
    • 5/8"-24 x 6" forged button head bolt
    • 5/8"-24 nylon locking nut
    • 6" from base of head to end of threads
    • 1-1/4" shock mount base
    • 1.5 O.D., .650" I.D. flat washer
    • Safely mounts to brackets 1/2" thick
    • Includes required washers, nylon lock nut, and longer mount bolt
    • Uses an Allen head wrench for holding it while tightening
    • Mount kits sold individually
    • Sold as Each (1)

    916-36011 Instructions (PDF)

     

  • QA1 1210-503 Repl Housing for K6136 Style 721-10103 Upper Ball Joint
    QA1 1210-503 Repl Housing for K6136 Style 721-10103 Upper Ball Joint
    SKU-72110503
    x
                

    QA1's 4-Bolt Style Ultimate Ball Joint is ideal for truck applications. Exclusive to QA1, this patented, self-lubricating design is 100% owner rebuildable.

    • '73-'95 Chevy Pickup
  • Seal for Spindle Mount Radir Wheels
    $4.99
    $9.99
    New
    Seal for Spindle Mount Radir Wheels
    SKU-91018562
    x
                These are part of a spindle bearing and seal kit. They are an inner bearing seal designed for use with Ford spindle mount Radir wheels.   
    • Sold each
    • Inner Bearing Seal
    • Ford Spindle Mount-Radir Wheels
    • See also 706-1300 for kit with seals and bearings
  • Western Chassis 50807 DS2 S10 Front Shock, 2 Inch Drop
    Western Chassis 50807 DS2 S10 Front Shock, 2 Inch Drop
    SKU-91050817
    x
                
    • High performance valving
    • Hardened chrome piston rod
    • Low friction teflon seals & guide bushings
    • Nitrogen pressurized
    • OEM style mount bushings
  • 1963-72 Chevy Pickup Rear Shock Relocation Kit
    1963-72 Chevy Pickup Rear Shock Relocation Kit
    SKU-9106372
    x
                

    Designed for 1963-72 Chevy trucks that have been lowered more than 3" in the rear. Our kit will mount the shocks at the correct angle allowing for more shock travel and a smoother ride.

    Note: Will not work with leaf springs suspension. 

  • TCI 1955-59 Chevy Pickup Rear Leaf Spring Kit
    TCI 1955-59 Chevy Pickup Rear Leaf Spring Kit
    SKU-91043355
    x
                

    Improve the ride, handling and stance of your classic truck with a new rear leaf spring kit. These kits are desgined to lower your truck 4-inches from stock and provide a smoother ride. Spring hangers and shock crossmember bolt on; axle pads are weld-on. Kits include leaf springs, brackets, shock kit, mounting and instructions.

    910-43355 Instructions (PDF)

  • QA1 1210-103 K6136 Style Upper Ball Joint Kit w/ Extended Length Stud
    QA1 1210-103 K6136 Style Upper Ball Joint Kit w/ Extended Length Stud
    SKU-721101031
    x
                

    Speedway Motors now offers QA1 Ultimate Ball Joints with extended length studs to optimize your front end. Various ball stud lengths are available for easy geometry changes to fine tune your roll center.

    QA1's 4-Bolt Style Ultimate Ball Joint is ideal for truck applications. Exclusive to QA1, this patented, self-lubricating design is 100% owner rebuildable.

    • '73-'95 Chevy Pickup
    • Choose your stud length: Standard, +.100", or .500"
    • Ultimate Low Friction Operation -Infinite preload adjustment allows breakaway torque to be set as low as 0 ft. lbs.  Completely smooth, bin-free operation.
    • Wear Resistant Design - Precision tolerance ball to race conformity results in even load distribution for unsurpassed wear resistance.  Precision ground 52100 bearing steel race ensures long life and ultra-smooth operation.
    • On-the-Car Adjustability - Infinite preload adjustment. No need to remove the ball joint from the car for adjustment.
    • Self-Lubricating - Fully greasable enhanced by self-lubricating components to ensure smooth operation.
    • Owner Rebuildable - Rebuilding is simple.  All parts replaceable at economical prices.

     

  • G-Comp Suspension Replacement Bump Stops, Black
    G-Comp Suspension Replacement Bump Stops, Black
    SKU-910351317
    x
                

    These black polyurethane bump stops are replacement for Speedway G-Comp suspension components and packages.  Sold as a pair, they come with mounting stud bolt and nut included.

    • Replacement for G-Comp suspension
    • Black polyurethane
    • Sold as a pair
  • AFCO 23140CR 10 Inch Extreme Chrome Coil-Over Spring, 140 Rate
    AFCO 23140CR 10 Inch Extreme Chrome Coil-Over Spring, 140 Rate
    SKU-10623140CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • Posies 2035 Super Slide Leaf Spring, 41-3/8 Inch, Reverse Eye
    Posies 2035 Super Slide Leaf Spring, 41-3/8 Inch, Reverse Eye
    SKU-5802035
    x
                Please view the product's page for more information
            
  • Speedway Mustang II Tubular Upper Control Arms, Stock Width, Pair
    Speedway Mustang II Tubular Upper Control Arms, Stock Width, Pair
    SKU-91035320
    x
                
    You don't have to look any farther for tubular control arms for your hot rod. Full .120 wall, 1" diameter tubing, fixture welded and features screw-in ball joints and no-squeak bushings. Will work with nearly any stock or aftermarket crossmember.

    Replaces 1974-80 Pinto, Bobcat and 1974-78 Mustang II control arms.

    • Full .120" wall
    • 1" diameter tubing
    • Fixture welded
    • Stock Width
    • Screw-in ball joints
    • No-squeak bushings
    • Works with all Mustang II crossmembers we sell
    • Sold as a pair

    910-35320 Tubular Upper Control Arm Instructions (PDF)

    Tubular Control Arm Chart (GIF)

    Check out our 5/8" narrower than stock width upper control arms (91034326) for applications that require a shorter track width.  These allow you to tuck the wheels up under the fenders without having to buy expensive special offset wheels.

  • FK Rod Ends SJML8T Stainless Steel 1/2 Inch LH Male Heim Joint
    FK Rod Ends SJML8T Stainless Steel 1/2 Inch LH Male Heim Joint
    SKU-1750815
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/2" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • Mustang II Coil-Over Lower Control Arm Mount Spacers, Set/4
    Mustang II Coil-Over Lower Control Arm Mount Spacers, Set/4
    SKU-2551000
    x
                

    Lower coil-over mount spacers for Mustang II IFS tubular lower control arms.

    Set includes four spacers, each with a .510" I.D., .750" O.D. and 1.375" length.

  • AFCO 23375CR 10 Inch Extreme Chrome Coil-Over Spring, 375 Rate
    AFCO 23375CR 10 Inch Extreme Chrome Coil-Over Spring, 375 Rate
    SKU-10623375CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • Replacement Polyurethane Four Bar Bushing
    Replacement Polyurethane Four Bar Bushing
    SKU-91008134
    x
                
    • ID .76"
    • Big OD 1.45"
    • Small OD 1.25"
    • Thickness .68"
  • QA1 1210-103 K6136 Style Upper Ball Joint
    QA1 1210-103 K6136 Style Upper Ball Joint
    SKU-72110103
    x
                

    QA1's 4-Bolt Style Ultimate Ball Joint is ideal for truck applications. Exclusive to QA1, this patented, self-lubricating design is 100% owner rebuildable.

    • '73-'95 Chevy Pickup
  • AFCO 24225CR 14 Inch Extreme Chrome Coil Over Spring - 225 Rate
    AFCO 24225CR 14 Inch Extreme Chrome Coil Over Spring - 225 Rate
    SKU-10624225CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter
    • Chrome Silicon Wire (not chrome vanadium) is used in every spring
    • Higher tensile strength, longer life
    • Cold-wound & heat-treated twice during manufacturing to withstand the most abusive conditions
    • Shot-peened

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • QA1 PCYML8T High Misalign Chromoly Heim Joint Rod Ends 1/2-20 LH Male
    QA1 PCYML8T High Misalign Chromoly Heim Joint Rod Ends 1/2-20 LH Male
    SKU-1750805
    x
                
    • Heat treated chromoly alloy steel body
    • Functions with up to 64° of misalignment
    • PTFE self-lubricating lining
    • Black oxide coated for corrosion resistance
    • Sold individually
  • AFCO 27400-1CR 7 Inch Extreme Chrome Coil-Over Spring, 400 Rate
    AFCO 27400-1CR 7 Inch Extreme Chrome Coil-Over Spring, 400 Rate
    SKU-106274001CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25