Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck Steering At Speedway Motors

Let Speedway Motors "Steer" you in the right direction with the right steering components for your classic pickup truck!  From steering U-joints from Sweet Mfg. to the top power steering pumps from KRC, we've got the best parts at the best prices around.  Don't forget to add a Speedway Motors aluminum steering wheel to give it the vintage classic truck look that can't be duplicated.

"Classic Truck, Steering Shaft, U-Joints and Couplers" Page 1 of 3

  • AFCO 30321 Steering Support Bearing
    AFCO 30321 Steering Support Bearing
    x
                Self-aligning bearing can be installed in firewall or mid-plate to support steering shaft 
            
  • Firewall Mount Flanged Bearing for Steering Shaft
    Firewall Mount Flanged Bearing for Steering Shaft
    x
                This firewall mount allows up to 30° of mis-alignment. Includes ball with two pressed steel flanges with 5/16" square mounting holes. 

    Choose 3/4" (750) or 1" (1000) shaft size.

    91032375-1000

    • Height: .74"
    • Length: 3.00"
    • Width: 1.90"
    • Mount C to C: 2.26"
    91032375-750
    • Height: .87"
    • Length: 3.00"
    • Width: 1.90"
    • Mount C to C: 2.26"
  • Sweet Mfg Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
    Sweet Mfg Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
    x
                Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. This universal joint is 3.875 inches long and 1.375 inches in diameter.
    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Steering Shaft, Fully Machined Double D Shaft, Raw 36 Inch
    Steering Shaft, Fully Machined Double D Shaft, Raw 36 Inch
    x
                

    Speedway now offers a steering shaft which is 3/4" DD machined the entire length of the steering shaft. This makes it easier to set up your steering.The carbon steel steering shaft come in 36".

     

  • Steering Shaft, Fully Machined Double D Shaft, Raw 22 Inch
    Steering Shaft, Fully Machined Double D Shaft, Raw 22 Inch
    x
                

     Speedway now offers a steering shaft that is 3/4" DD machined the entire length of the shaft. This makes it easier to set up your steering. The carbon steel steering shaft come in 22".

     

  • Sweet Mfg Steering U-Joint, 3/4 Inch 36-Spline to 3/4 DD, GM Manual/Mustang II
    Sweet Mfg Steering U-Joint, 3/4 Inch 36-Spline to 3/4 DD, GM Manual/Mustang II
    x
                

    Don't jeopardize your safety with inferior quality Mustang II power rack universal joints. Speedway offers only the finest steering U-joints made by Sweet Manufacturing.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    •  3/4"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Speedway Forged U-Joint, 36-Spline to 3/4 Round
    Speedway Forged U-Joint, 36-Spline to 3/4 Round
    x
                

    Forged steel 3/4" 36-spline to 3/4" round weld-on steering U-joint.

    The overall length of this steering universal joint is 3-3/4".

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg Steering U-Joint, 5/8-36 Spline, 3/4 DD, Vega/Corvair/GM Rack
    Sweet Mfg Steering U-Joint, 5/8-36 Spline, 3/4 DD, Vega/Corvair/GM Rack
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature full compliment bearings and a 5/8"-36 spline.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 5/8"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • U-Joint, 5/8"-36 Spline to 3/4" Round Weld-On
    U-Joint, 5/8"-36 Spline to 3/4" Round Weld-On
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. This steering universal joint is the highest quality for racing or street use.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 5/8"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • 3/4 O.D. Solid Steel Steering Shaft
    From: $12.99
    Product Rating: 5.00 Stars
    3/4 O.D. Solid Steel Steering Shaft
    x
                

    Speedways steering shaft is made for you to cut-to-fit. This steering shaft entails:

    •  3/4" O.D.
    • 1018 solid steel steering shaft
    • Available in 24", 36", 48", 60" and 72" lengths

     

    Steer Shaft Application Chart

  • U-Joint, 3/4" Round Weld-on To 3/4 DD
    U-Joint, 3/4" Round Weld-on To 3/4 DD
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4 round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Steering Coupler, 3/4"-36 Spline To 3/4" Round Non-Flex
    Steering Coupler, 3/4"-36 Spline To 3/4" Round Non-Flex
    x
                

    Steel coupler is splined on one end and has a 3/4" round hole on the other. This Mustang II power rack U joint coupler is 2" L x 1.060" D.

    When ordering, select applicable hole size/spline needed.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

  • U-Joint, 3/4"-36 Spline To 3/4" Round Weld-on
    U-Joint, 3/4"-36 Spline To 3/4" Round Weld-on
    x
                

    Don't jeopardize your safety with inferior quality Mustang II power rack universal joints. Speedway offers only the finest steering U-joints made by Sweet Manufacturing.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    •  3/4"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Steering Shaft Stop
    $12.99
    Steering Shaft Stop
    x
                This steering shaft stop keeps your steering shaft from pulling off the input shaft of the gear box. Split design allows easy installation without disassembling the steering shaft. Tapered to allow clearance, even in mis-aligned heims. Designed to be used with 3/4" O.D. shaft.
            
  • Sweet Mfg. Steering Coupler, 9/16 Inch 26 Spline to 3/4 Inch Round Non-Flex
    Sweet Mfg. Steering Coupler, 9/16 Inch 26 Spline to 3/4 Inch Round Non-Flex
    x
                Steel coupler is splined on one end and has a 3/4" round hole on the other.  

    When ordering, select applicable hole size/spline needed.

    Coupler = 2" L x 1.060" D

  • Sweet Mfg Steering U-Joint, 1 Inch DD to 3/4 DD, IDIDIT/Flaming River Column
    Sweet Mfg Steering U-Joint, 1 Inch DD to 3/4 DD, IDIDIT/Flaming River Column
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing.

    These steering universal joints are CNC machined from aircraft steel to precision tolerances. The sealed needle bearing design will last ten times longer than a standard pin and block universal joint. The unique nickel plating prevents rust without the hassle of painting.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 9/16 26 Spline to 3/4 DD, Mustang II Manual
    Sweet Mfg Steering U-Joint, 9/16 26 Spline to 3/4 DD, Mustang II Manual
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature forged Vanadium steel yokes and full compliment bearings.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 9/16 Inch 26-Spline to 3/4 Round, Mustang II Manual
    Sweet Mfg Steering U-Joint, 9/16 Inch 26-Spline to 3/4 Round, Mustang II Manual
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have 3/4 weld-on ends.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint 3/4 - 30 Spline to 3/4 Round, Small GM P/S 78-Up
    Sweet Mfg Steering U-Joint 3/4 - 30 Spline to 3/4 Round, Small GM P/S 78-Up
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Unisteer 8050300 Steering U-Joint, 3/4 Inch Double D to 3/4 Inch DD
    Unisteer 8050300 Steering U-Joint, 3/4 Inch Double D to 3/4 Inch DD
    x
                

    These polished stainless steel steering U-joints look great and use a pinch bolt on each end for easy installation.

    This particular steering universal joint is made to fit 3/4"DD shafting on both sides. Both sides incorporate the pinch bolt design.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

  • Sweet Mfg Steering U-Joint, 13/16 36-Spline to 3/4 Round, Big GM Pre 1978
    Sweet Mfg Steering U-Joint, 13/16 36-Spline to 3/4 Round, Big GM Pre 1978
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 13/16"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Polished Stainless Steel 3/4 O.D. Double D Shaft
    Polished Stainless Steel 3/4 O.D. Double D Shaft
    x
                

    Steering shafts that are just plain looking look kind of silly with those shiny stainless steel U-joints. Our polished, stainless steel, double D steering shaft would be more compatible. We offer steering shafts in 18", 22", and 36" cut to fit lengths.

     

  • Sweet Mfg Steering U-Joint, 3/4-30 Spline to 3/4 Inch DD, Small GM P/S 1978-Up
    Sweet Mfg Steering U-Joint, 3/4-30 Spline to 3/4 Inch DD, Small GM P/S 1978-Up
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are needle bearing and have 3/4"-30 spline. 

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 3/4 Inch DD to 1 Inch DD, GM Column / Universal
    Sweet Mfg Steering U-Joint, 3/4 Inch DD to 1 Inch DD, GM Column / Universal
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 3.875 inches long and 1.375 inches in diameter. 

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • AFCO 30307 U-Joint, 9/16 Inch-26 Spline
    AFCO 30307 U-Joint, 9/16 Inch-26 Spline
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 9/16"-26 spline x 3/4" round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Broached spline for better fit
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg. Double Steering U-Joint, 5/8 36-Spline to 3/4 DD, Vega/Corvair/GM
    Sweet Mfg. Double Steering U-Joint, 5/8 36-Spline to 3/4 DD, Vega/Corvair/GM
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.

    • Overall length is 5-1/2”
    • O.D. at ends is 1.12”
    • O.D. in the middle is 1.476”
    • O.D. at caps is 1.350”
    • O.D. at cap retainer screws is 1.545”
    • Length of center section is 2-3/4”
    Learn more about u-joints and steering systems by reading our tech article, U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 3/4 Inch Round to 1 Inch DD, GM Column/Universal
    Sweet Mfg Steering U-Joint, 3/4 Inch Round to 1 Inch DD, GM Column/Universal
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4 round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Steering U-Joint, 1 Inch 48-Spline to 3/4 Inch Round, GM Column
    Sweet Mfg. Steering U-Joint, 1 Inch 48-Spline to 3/4 Inch Round, GM Column
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 1"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Double Steering U-Joint, 3/4 Inch 36-Spline to 3/4 Inch DD, GM, MII
    Sweet Mfg. Double Steering U-Joint, 3/4 Inch 36-Spline to 3/4 Inch DD, GM, MII
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. This Mustang II power rack U joint is made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Double Steering U-Joint, .620 Inch-36 Spline to 3/4 Inch Round, Chrysler
    Double Steering U-Joint, .620 Inch-36 Spline to 3/4 Inch Round, Chrysler
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • AFCO 30309 U-Joint, 5/8 Inch-36 Spline
    $64.99
    $69.99
    AFCO 30309 U-Joint, 5/8 Inch-36 Spline
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 5/8"-36 spline x 3/4" round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Broached spline for better fit
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg. Double Steering U-Joint, 3/4 Inch Round to 3/4 Inch DD, Universal
    Sweet Mfg. Double Steering U-Joint, 3/4 Inch Round to 3/4 Inch DD, Universal
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. Made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Double Steering U-Joint, 5/8-36 Spline 3/4 Round, Vega/Corvair/GM
    Sweet Mfg. Double Steering U-Joint, 5/8-36 Spline 3/4 Round, Vega/Corvair/GM
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    • Overall length is 5-1/2”
    • O.D. at ends is 1.12”
    • O.D. in the middle is 1.476”
    • O.D. at caps is 1.350”
    • O.D. at cap retainer screws is 1.545”
    • Length of center section is 2-3/4”
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

     

  • Sweet Mfg. 401-51221 U-Joint, 3/4 Inch-36 Spline to 3/4 Inch-20 Spline
    Sweet Mfg. 401-51221 U-Joint, 3/4 Inch-36 Spline to 3/4 Inch-20 Spline
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. All of these steering universal joints have 3/4 weld-on ends.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

     

  • Sweet Mfg Steering U-Joint, 13/16-36 Spline to 1 Inch DD, Big GM Pre 1978
    Sweet Mfg Steering U-Joint, 13/16-36 Spline to 1 Inch DD, Big GM Pre 1978
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 13-16"-36 spline and feature forged Vanadium steel yokes.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 13/16"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering Coupler, 13/16 36 Spline, 3/4 Rnd Non-Flex, Big GM Pre '78
    Sweet Mfg Steering Coupler, 13/16 36 Spline, 3/4 Rnd Non-Flex, Big GM Pre '78
    x
                

    Steel coupler is splined on one end and has a 3/4" round hole on the other.

    Fits big GM gear box for pre 1978 vehicles.

    When ordering, select applicable hole size/spline needed.

    Warning: This coupler is splined 13/16 x 36 all the way through.  It fits OK on 3/4" round shaft for welding, even though it has interior splines.

    Coupler = 2" L x 1.060" D

Goto Previous PagePrevious Page
1 2 3