Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck Steering At Speedway Motors

Let Speedway Motors "Steer" you in the right direction with the right steering components for your classic pickup truck!  From steering U-joints from Sweet Mfg. to the top power steering pumps from KRC, we've got the best parts at the best prices around.  Don't forget to add a Speedway Motors aluminum steering wheel to give it the vintage classic truck look that can't be duplicated.

"Classic Truck, Steering Column" Page 1 of 4

  • Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
    Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
    SKU-4461232C
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 32" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1232C Instructions (PDF)

  • Ididit 2402500040 Steering Column Ball Swivel Lower Mount, 2-1/4 Inch
    Ididit 2402500040 Steering Column Ball Swivel Lower Mount, 2-1/4 Inch
    SKU-4464250
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's billet aluminum ball swivel style mounts make this task much easier.

    Note: This mount may require slight modification to the I.D. of the ball or O.D. of the column end due to variation between manufacturers. It is not for chrome columns.

    446-4250 Instructions (PDF)

  • Ididit 1250280010 Floor Shift Collapsible RH Drive Steering Column
    Ididit 1250280010 Floor Shift Collapsible RH Drive Steering Column
    SKU-44628010
    x
                For the dedicated hobbyist overseas, the Ididit Collapsible Series RH Drive floor shift tilt columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Right Hand Drive Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available in paintable steel.
    • RH Drive
    • Paintable steel
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 1120300010 Tilt Wheel Steering Column, 30 Inch, Plain
    Ididit 1120300010 Tilt Wheel Steering Column, 30 Inch, Plain
    SKU-4461230D
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 30" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1230D Instructions (PDF)

  • 55 Degree Steering Column Mount for T-Bucket Kit
    55 Degree Steering Column Mount for T-Bucket Kit
    SKU-7154255
    x
                
    These mounts are the economical mounting solution for T-bucket steering columns.  They are designed to be used in conjunction with our 1-3/4" diameter stainless or plain steel hot rod steering columns.
    • Mount puts the steering column at a 55 degree angle to the firewall
    • Fits all of our deluxe "T" bodies with the floor / firewall installed
    • Designed to be used with a 1-3/4" diameter steering column
  • Ididit 1120280010 Tilt Wheel Steering Column, 28 Inch, Plain
    Ididit 1120280010 Tilt Wheel Steering Column, 28 Inch, Plain
    SKU-4461228D
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1228D Instructions (PDF)

  • Lokar DUK-2200 Steering Column Dress-Up Kit, Brushed Aluminum
    Lokar DUK-2200 Steering Column Dress-Up Kit, Brushed Aluminum
    SKU-491DUK2200
    x
                

    3-piece Seamless Steering Column Dress-Up Kit. Unique one-piece solid billet aluminum design. Kit includes Turn Signal Lever, Tilt Steering Lever and Emergency Flasher Knob. Kit fits all GM, 1969 through 1976 Chrysler, and all aftermarket columns with single screw design.

    • No steel and chrome combinations.
    • Appearance is smooth and sleek. 
    • Adds class and style to any column.
  • Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole
    Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole
    SKU-5605144
    x
                

    Beautifully polished cast aluminum steering column drop for early Ford steering columns (1-1/2" diameter tube) with column shift. Can be reworked to fit other makes of cars.

    Note: Column drop length shown is measured from the centerline of the column to the column drop mount surface.

  • Ididit 1130330020 Tilt Wheel Steering Column w/ Shift, 33 Inch, Chrome
    Ididit 1130330020 Tilt Wheel Steering Column w/ Shift, 33 Inch, Chrome
    SKU-4461333C
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 33" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1333C Instructions (PDF)

  • Ididit 2402300010 Steering Column Band Swivel Lower Mount, 2-1/4 Inch
    Ididit 2402300010 Steering Column Band Swivel Lower Mount, 2-1/4 Inch
    SKU-4464230
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's steel band swivels are an easy and inexpensive solution.

    446-4030 Instructions (PDF)

  • Ididit 3000313449 Steering Coupler, 3/4 Inch-36 Spline to 3/4 Inch DD
    Ididit 3000313449 Steering Coupler, 3/4 Inch-36 Spline to 3/4 Inch DD
    SKU-4463449
    x
                

    No-shift columns use 1" DD u-joints, while shift columns use 3/4"-36 spline u-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

    Steering U-Joints and Couplers Application Chart (GIF)

    Steering Box/Rack/Spline Chart (Link)

    Spline Size (Link)

     

  • Ididit 1130651020 1947-54 GM Pickup Tilt Column with Shifter, Chrome
    Ididit 1130651020 1947-54 GM Pickup Tilt Column with Shifter, Chrome
    SKU-4463652
    x
                Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our coupler 446-5249.
            
  • Speedway Universal Steering Column Mount, 2 Inch
    Speedway Universal Steering Column Mount, 2 Inch
    SKU-91032631
    x
                These versatile mounts install at any angle to solidly mount your steering column.
    • Available in 2" diameter
    • Choose from black or stainless steel
  • Ididit 1130280020 Tilt Wheel Steering Column w/ Shift, 28 Inch, Chrome
    Ididit 1130280020 Tilt Wheel Steering Column w/ Shift, 28 Inch, Chrome
    SKU-4461328C
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1328C Instructions (PDF)

  • Ididit 1300280010 28 Inch Plain Collapsible Tilt Steering Column
    Ididit 1300280010 28 Inch Plain Collapsible Tilt Steering Column
    SKU-44632810
    x
                
    The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit.
    • Paintable steel
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 1300320020 32 Inch Chrome Collapsable Tilt Steering Column
    Ididit 1300320020 32 Inch Chrome Collapsable Tilt Steering Column
    SKU-44633220
    x
                The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available a chrome plated finish.
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Speedway Swinger Column Drop, Tilt Column, 2-1/4 Inch Hole, 3-1/2 Inch
    Speedway Swinger Column Drop, Tilt Column, 2-1/4 Inch Hole, 3-1/2 Inch
    SKU-91032701
    x
                

    A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 5-1/2 Inch Drop
    Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 5-1/2 Inch Drop
    SKU-91032671
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two hex screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 5-1/2 Inch drop
    • 2-7/8" mount hole spacing
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Standard GM 5-Position Tilt Steering Column, 30 Inch Long, Chrome
    Standard GM 5-Position Tilt Steering Column, 30 Inch Long, Chrome
    SKU-91032972
    x
                5-position tilt columns for those who want great  performance at affordable pricing. Made from steel 2" tube. Standard 1"  DD output shaft. Column accepts any 1969-94 GM car steering wheel or  aftermarket adapter.
    • Chrome finish
    • 30" length
    • For floor shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • Ididit 2301000010 Adjustable Under Dash Mount
    Ididit 2301000010 Adjustable Under Dash Mount
    SKU-4463100
    x
                

    Adjustable Under Dash Mount. 

    NOTE: This item will not work with Speedway column drops.

  • Ididit 1120652010 1955-59 GM Pickup Tilt Steering Column, Plain
    Ididit 1120652010 1955-59 GM Pickup Tilt Steering Column, Plain
    SKU-4465559
    x
                Original equipment steering columns are loaded with unsightly brackets,  tabs and switches. These columns are much cleaner in appearance and  eliminate the column-mounted key switch. These non-shift versions  feature a 2" O.D. column tube. 

    Each has a standard GM 3-7/8" wire harness, 8-position tilt, and accept stock 1955-59 GM pickup steering wheels or our custom wheels with an adapter (sold separately).

    • 8 position tilt
    • Self canceling turn signal
    • 4 way flashers
    • Knobs & Levers
    • 3-7/8" wiring plugs
    • 1" DD lower shaft
    • Includes: floor mount plate with gasket,delrin cover, with under dash column drop for easy installation
  • Lokar DUK-2201 Steering Column Dress-Up Kit, Polished Aluminum
    Lokar DUK-2201 Steering Column Dress-Up Kit, Polished Aluminum
    SKU-491DUK2201
    x
                

    3-piece Seamless Steering Column Dress-Up Kit. Unique one-piece solid billet aluminum design. Kit includes Turn Signal Lever, Tilt Steering Lever and Emergency Flasher Knob. Kit fits all GM, 1969 through 1976 Chrysler, and all aftermarket columns with single screw design.

    • No steel and chrome combinations.
    • Appearance is smooth and sleek. 
    • Adds class and style to any column.
  • Street Rod Steering Column Drop Mount, 1-3/4 In Hole, 3-1/2 In Drop
    Street Rod Steering Column Drop Mount, 1-3/4 In Hole, 3-1/2 In Drop
    SKU-91032270
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 3-1/2 Inch drop
    • Mount hole spacing is 2-7/8".
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 2305470040 5.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
    Ididit 2305470040 5.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
    SKU-4463544
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

    • For tilt column
    • 2 Inch diameter hole
    • 5-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    SKU-91032670
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two hex screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 3-1/2 Inch drop
    • 2-7/8" mount hole spacing
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Ididit 1250320020 32 In Collapsible RH Drive Tilt Steering Column
    Ididit 1250320020 32 In Collapsible RH Drive Tilt Steering Column
    SKU-44632020
    x
                
    For the dedicated hobbyist overseas, the Ididit Collapsible Series RH Drive floor shift tilt columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Right Hand Drive Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit.
    • RH Drive
    • Chrome finish
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 2401010010 2 Inch Floor Mount For Collapsible Column
    Ididit 2401010010 2 Inch Floor Mount For Collapsible Column
    SKU-44624010
    x
                

    This 2 inch floor mount is designed to mount a steering column to the floor or firewall.  Allows the floor/firewall to move independently of the column in the event of impact.  It can be installed on either side of the firewall.  Installation of this mount is required when utlizing an Ididit collapsible steering column

    • Floor Mount
    • Used in conjunction with 2" collapsible steering columns

     

  • Ididit 1130280010 Tilt Wheel Steering Column w/ Shift, 28 Inch, Plain
    Ididit 1130280010 Tilt Wheel Steering Column w/ Shift, 28 Inch, Plain
    SKU-4461328D
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1328D Instructions (PDF)

  • Ididit 2302470040 2.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
    Ididit 2302470040 2.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
    SKU-4463244
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

    • For tilt column
    • 2 Inch diameter hole
    • 2-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 1300300020 30 Inch Chrome Collapsable Tilt Steering Column
    Ididit 1300300020 30 Inch Chrome Collapsable Tilt Steering Column
    SKU-44633020
    x
                The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available in a chrome plated finish.
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 2401300010 Steering Column Band Swivel Lower Mount, 2 Inch
    Ididit 2401300010 Steering Column Band Swivel Lower Mount, 2 Inch
    SKU-4464130
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's steel band swivels are an easy and inexpensive solution.

    446-4030 Instructions (PDF)

  • Speedway Universal Steering Column Mount, 2-1/4 Inch
    Speedway Universal Steering Column Mount, 2-1/4 Inch
    SKU-91032632
    x
                These versatile mounts install at any angle to solidly mount your steering column.
    • Available in 2.25" diameter
    • Choose from black or stainless steel
  • Standard GM 5-Position Tilt Steering Column, 32 In, Column Shift
    Standard GM 5-Position Tilt Steering Column, 32 In, Column Shift
    SKU-91032980
    x
                These 5-position tilt columns are for those who want great  performance     at affordable pricing. Made from steel 2" tube. Standard 1"  DD  output    shaft. Column accepts any 1969-94 GM car steering wheel or    aftermarket   adapter.
    • Chrome plated finish
    • 32" length
    • Column shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • Ididit 1120320010 Tilt Wheel Steering Column, 32 Inch, Plain
    Ididit 1120320010 Tilt Wheel Steering Column, 32 Inch, Plain
    SKU-4461232D
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 32" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1232D Instructions (PDF)

  • Ididit 1120280020 Tilt Wheel Steering Column, 28 Inch, Chrome
    Ididit 1120280020 Tilt Wheel Steering Column, 28 Inch, Chrome
    SKU-4461228C
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1228C Instructions (PDF)

  • Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole w/ Shift
    Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole w/ Shift
    SKU-5605143
    x
                

    Beautifully polished cast aluminum steering column drop for early Ford steering columns (1-1/2" diameter tube) with column shift. Can be reworked to fit other makes of cars.

    Note: Column drop length shown is measured from the centerline of the column to the column drop mount surface.

  • Speedway Swinger Column Drop, Tilt Column, 2-1/4 Inch Hole, 5-1/2 Inch
    Speedway Swinger Column Drop, Tilt Column, 2-1/4 Inch Hole, 5-1/2 Inch
    SKU-91032705
    x
                

    A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Ididit 1130300010 Tilt Wheel Steering Column w/ Shift, 30 Inch, Plain
    Ididit 1130300010 Tilt Wheel Steering Column w/ Shift, 30 Inch, Plain
    SKU-4461330D
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 30" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1330D Instructions (PDF)

  • Street Rod Steering Column Drop Mount, 1-3/4 In Hole, 2-1/2 In Drop
    Street Rod Steering Column Drop Mount, 1-3/4 In Hole, 2-1/2 In Drop
    SKU-91032269
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 2-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 1250320010 32 In Collapsible RH Drive Tilt Steering Column
    Ididit 1250320010 32 In Collapsible RH Drive Tilt Steering Column
    SKU-44632010
    x
                
    For the dedicated hobbyist overseas, the Ididit Collapsible Series RH Drive floor shift tilt columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Right Hand Drive Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit.
    • RH Drive
    • Paintable steel
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
Goto Previous PagePrevious Page
1 2 3 4