Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck Body, Interior, Gauges At Speedway Motors

Speedway Motors is the classic pickup truck source for body parts, gauges, and interior accessories! Find all the essential fiberglass fenders, hoods, tailgates, gauge sets by Stewart Warner and Auto Meter, and vintage gas caps, in our online catalog. While you are there, check out our emblems and decals, rear and side view mirrors, windshields, fiberglass hoods and step plates. Don't forget about Speedway's vintage seats and seat belts for your classic truck, too!

"Classic Truck, Seats" Page 1 of 2

  • Adjustable Seat Riser
    $39.99
    Adjustable Seat Riser
    x
                
    • Cadmium plated steel
    • Sold in a set of 2 pairs
    • Three mounting hole options to adjust height
  • Replacement Lap Seat Belts
    $14.99
    Product Rating: 4.62 Stars
    Replacement Lap Seat Belts
    x
                Before you floor it...BUCKLE UP! These replacement seat belts will allow you to upgrade your car to a modern lap seat belt. Handy push button buckle is attached to 1-7/8" wide belt. This seatbelt allows the mounting tabs to be installed at different distances from the buckle and still allows the buckle to be positioned at a place (over the wearers' midsection) of the installers' choosing. 74" long to fit most applications. Black.

    Meets DOT and federal standards.

    910-72050 Instructions (PDF)

  • Clip-In Conversion Kit
    $19.99
    Product Rating: 4.00 Stars
    Clip-In Conversion Kit
    x
                

    Convert your harness from bolt-in to clip-in with this kit. All heavy duty hardware and snap hook. Two bolts, two washers, two clips.

    • Shank diameter is .434 or 7/16 X 20 threads per inch
    • Shank thread length is approximately 1 5/8"
    • Overall length including the eye is 3 1/8"
    • Washer diameter is 2 1/2" with 7/16" hole
    • Fits 2 inch wide belts

     

  • Warmseats Seat Heater, Waterproof Orange Unit
    Warmseats Seat Heater, Waterproof Orange Unit
    x
                

    Perfect for a roadster or any car without a heater.  These state of the art seat heaters are OEM applications.  Easy to install heaters fit between the foam and upholstery of the seats bottom and back.  The pre-wired heater has a Hi/Lo/Off switch and only draws 3-1/2 amps.  You will need one heater for each vehicle occupant.  12 volt.

  • Universal Seat Sliders
    $24.99
    Product Rating: 4.42 Stars
    Universal Seat Sliders
    x
                

    These universal seat sliders allow you to easily adjust the bucket seats in your car. Since every application is different, some modification may be required.

    Directly fits Speedway seat frame and mounting plates (also available as a complete kit).

    910-70026 Instructions (PDF)

  • Universal Seat Mounting Frame, Slider and Mounts
    Universal Seat Mounting Frame, Slider and Mounts
    x
                

    These universal seat components will allow you to install bucket seats in any car. Since every application is different, some modification may be required. 

    • 7" overall assembled height
    • 15-1/2" wide
    • 17-1/2" long
    • 7” front-to-rear adjustment

    NOTE: Kit mounts 1 seat. If mounting 2 bucket seats or 1 bench seat, 2 kits would be required.

    910-70024 Instructions (PDF)

  • Lift Latch Lap Belt
    $24.99
    Product Rating: 4.61 Stars
    Lift Latch Lap Belt
    x
                Seat belts in six popular colors. Chrome lift latch with  standard belt.  Red, black, maroon, gray, dark blue, or tan.   Lap belts adjustable from 60" to 74". DOT approved. 

    Includes 1.5" long mounting bolts and hardware. These are 1-13/16" wide.
  • Push Button Lap Seat Belt
    $19.99
    Product Rating: 4.83 Stars
    Push Button Lap Seat Belt
    x
                

    You don't take chances when driving your family car. Why take chances when you're in your hot rod? Our D.O.T. approved seat belts are available in six popular colors. Painted push button buckles with standard, non-retracting belt. Lap belts adjustable from 60" to 74".

    Has the mounting tabs sewn into place on the end of the belt. This arrangement makes positioning of the mounting holes in the car more important. If the installer wants the buckle near the wearer's hip, one side of the belt must be attached to the vehicle at a very specific location. Only half of the belt can be adjusted for length and thus position. 

    • Standard adjustable lap type
    • Chrome lift latch
    • Painted push buckles in red, black, maroon, grey, dark blue, or tan
    • Lap belts adjustable from 60" to 74" 
    • Includes mounting hardware (2 bolts, 2 nuts, 2 washers)
  • Low Back Vinyl Seat
    From: $229.99
    Product Rating: 4.58 Stars
    Low Back Vinyl Seat
    x
                

    If you are like us, it's hard to find seats small enough to fit in your car. These seats are 24" tall, 20-1/2" wide and 20" deep overall and the back adjusts to your preference. The seat back will also fold forward for easy access to the rear of the vehiclce. Each seat includes a pair of sliders, but universal mount # 910-8115-side is sold separately (shown below).

    • @ front of seat, 7 3/4" from mounting plate to top of cusion
    • @ rear of seat,  5 1/2" from mounting plate to top of cusion
    Seat bottom features female threaded mounting holes with the following dimension that corresponds to the included seat sliders:
    • 14-1/2" center to center spacing for side to side bolt pattern 
    • 11-9/16" center to center spacing for front to back bolt pattern

    Choose black or beige vinyl and LH or RH side. 

  • Univeral Seat Frame Only
    $24.99
    Product Rating: 4.73 Stars
    Univeral Seat Frame Only
    x
                

    These universal seat mounting frames will allow you to install bucket seats almost any car. Purchase either the complete assembly with sliders and mounting plates (910-70024) or individual parts as needed.

    Since every application is different, some modification may be required.

    910-70025 Instructions (PDF)

     

  • Push Button Retractable Lap Belt
    Push Button Retractable Lap Belt
    x
                We offer you seat belts in six popular colors. Painted push buckles with  retractable type belt. Red, black, maroon, gray, dark blue, or tan.   Lap belts adjustable from 60" to 74". DOT approved. 

    Includes mounting hardware.
  • Mustang Style Seat
    From: $209.99
    Product Rating: 5.00 Stars
    Mustang Style Seat
    x
                
    • 24" tall, 20-1/2" wide, 20-1/2" deep
    • Classic 60's styling
    • Sliders included
    • Universal or custom mount sold separately
    • Black, white or beige vinyl upholstery
    • Specify color
  • Universal Seat Mount Plates
    $12.99
    Product Rating: 4.80 Stars
    Universal Seat Mount Plates
    x
                These universal seat mount plates will allow you to install almost any bucket seat in your car. Purchase either the complete assembly (910-70024) or these individual plates as needed. Since every application is different, some modification may be required. 

    910-70027 Instructions (PDF)

     

  • Scat Procar Pro 90 Series Seat
    $269.99
    Product Rating: 4.00 Stars
    Scat Procar Pro 90 Series Seat
    x
                

    These Pro-90 Series 1300 seats from Scat offer a good combination of style, comfort, and affordability. The seats feature vintage-style upholstery, durable steel frames, and a lever-style seatback recline mechanism.

    • All-steel frame is TIG-welded
    • Hi-density injection-molded foam
    • "One-Touch" recline/backrest release
    • Backrest positions from fully upright to horizontal
    • Includes forward release for easy access to rear seat
    • Adjustable sliders included
    • Direct-fit bolt-in adapter mounts sold seperately
  • Lift Latch Retractable Seat Belts
    Lift Latch Retractable Seat Belts
    x
                We offer you seat belts in six popular colors. Chrome lift latch with retractable type belt. Red, black, maroon, gray, dark blue, or tan.  Lap belts adjustable from 60" to 74". DOT approved. 

    Includes mounting hardware.
  • Universal Mount For Low Back Vinyl Seat
    Universal Mount For Low Back Vinyl Seat
    x
                

    Universal seat mount for our lowback vinyl seat # 910-1400. This 'universal fit' base can be cut/redrilled/modified to make it fit many applications. It is approximately 2" tall and has a footprint of 15-5/8" front to back and 19" from side to side.

    LH and RH sides sold separately.

  • EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly High Back bucket seat (141-2300).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly High Back seat (141-2300)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern, Each
    EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern, Each
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly Low Back bucket seat (141-2400).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly Low Back seat (141-2400)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • Scat ProCar Rally Seats with Houndstooth Inserts
    Scat ProCar Rally Seats with Houndstooth Inserts
    x
                The ProCar Rally Seat by Scat Enterprizes features OEM grade fabric and vinyl with map pockets and easy adjustment reclining levers.  Available in left or right side styles.
    • Sliders included
    • Adjustable headrest
    • Adjustable incline or recline
    • High quality TIG welded steel frame
    • High quality injected molded foam
    • Seat adaptors available for most models
    • OEM grade houndstooth center
    • Choose left or right side versions
  • Morris Classic Concepts 60 Inch Universal Lap Belt with Bowtie Lift Latch
    Morris Classic Concepts 60 Inch Universal Lap Belt with Bowtie Lift Latch
    x
                

    Replace your missing or damaged lap belts with belts to match our front 3-point seat belts. All come with Grade 8 bolts and SAE washers for mounting.

    • Equips one seat
    • Chrome bowtie lift latch
    • Black webbing
    • Grade 8 hardware included
  • Morris Classic Concepts 60 Inch Universal Lap Belt with Chrome GM Buckle
    Morris Classic Concepts 60 Inch Universal Lap Belt with Chrome GM Buckle
    x
                

    Replace your missing or damaged lap belts with belts to match our front 3-point seat belts. All come with Grade 8 bolts and SAE washers for mounting.

    • Equips one seat
    • Chrome GM push-button latch
    • Black webbing
    • Grade 8 hardware included
  • Scat Procar Rally 1000 Series Seats
    Scat Procar Rally 1000 Series Seats
    x
                

    Equally at home in either a muscle car, pony car, Jeep or off-road buggy, the Rally features vertical stitching for the vintage look with a pronounced side bolstering for added support under hard cornering.

    • All-steel frame is TIG-welded
    • Hi-density injection-molded foam
    • "One-Touch" recline/backrest release
    • Backrest positions from fully upright to horizontal
    • Includes forward release for easy access to rear seat
    • Adjustable sliders included
    • Direct-fit bolt-in adapter mounts sold separately (see below)
    • Backrest Width: 17"
    • Widest Point (Back): 21"
    • Widest Point (Bottom): 22"
    • Height: 24.5"
    • Headrest Width: 11.5"
    • Headrest Height: 7"
    • Headrest Pegs: 6"
  • EMPI 62-2400 Poly Low Back Comfort Bucket Seat
    EMPI 62-2400 Poly Low Back Comfort Bucket Seat
    x
                

    EMPI's super strong double walled polyethylene High and Low Back Seats just got better.  The seat and back areas have been re-contoured for added comfort and lumbar support.  The finish has been upgraded for a great show car look.  EMPI seats feature a strong double wall shell, contemporary design, permanent-mounting inserts molded into the base, slots for seat belts and shoulder straps.   

    • New tooling with EMPI molded into the plastic
    • Now uses 6-10mm x 1.5 threaded inserts
    • Low back style

    Use without seat covers for low maintenance or add our thickly padded high grade vinyl covers with snap fasteners (141-2408) for that one-off custom look and added comfort.

  • Black Seat Belt Buckle Designer Belt
    Black Seat Belt Buckle Designer Belt
    x
                Being strapped in by a seatbelt is a securing feeling, isn't it time your pants had that kind of security?  Now they can with this belt which is adjustable from 22" to 42".
            
  • Speedway Bomber Seat Back Covers
    $119.99
    $149.99
    Product Rating: 5.00 Stars
    Speedway Bomber Seat Back Covers
    x
                Finish off your bomber seats with these quality black tweed cloth seat covers.  They secure to the rear of the seat base with easy to install snaps and works with our bomber seat pads.
    • Black tweed cloth
    • Complete your bomber seat installation
    • Fits 910-70057 & 910-70062 seats
    • Matches bomber seat pad 715-1105
    • Snaps securely at the rear of seat base
  • Scat Procar Rally 1050 Lowback Seats
    Scat Procar Rally 1050 Lowback Seats
    x
                

    The Rally 1050 "Lowback" is equally at home in either a muscle car, pony car, Jeep, or off-road buggy. The Rally features vertical stitching for a vintage look, with pronounced side bolstering for added support under hard cornering.

    • All-steel frame is TIG-welded
    • Hi-density injection-molded foam
    • "One-Touch" recline/backrest release
    • Backrest positions from fully upright to horizontal
    • Includes forward release for easy access to rear seat
    • Adjustable sliders included
    • Direct-fit bolt-in adapter mounts sold separately
    • Backrest Width: 17"
    • Widest Point (Back): 21"
    • Widest Point (Bottom): 22"
    • Height: 24.5"
  • EMPI 62-2300 Poly High Back Comfort Bucket Seat
    EMPI 62-2300 Poly High Back Comfort Bucket Seat
    x
                

    EMPI's super strong double walled polyethylene High and Low Back Seats just got better.  The seat and back areas have been re-contoured for added comfort and lumbar support.  The finish has been upgraded for a great show car look.  EMPI seats feature a strong double wall shell, contemporary design, permanent-mounting inserts molded into the base, slots for seat belts and shoulder straps.   

    • 21" width x 32" height
    • New tooling with EMPI molded into the plastic
    • Now uses 6-10mm x 1.5 threaded inserts
    • High back style
    Mounting Holes:
    • Spaced 8" apart widthwise
    • From the front to back, they are spaced 5-1/4" on center for the first set to the middle set
    • From the middle set to the rear most set, they are spaced 5-5/8"

    Use without seat covers for low maintenance or add our thickly padded high grade vinyl covers with snap fasteners (141-2310) for that one-off custom look and added comfort.

  • Scat Procar Sportsman 1605 Series Seat
    From: $179.99
    Product Rating: 3.00 Stars
    Scat Procar Sportsman 1605 Series Seat
    x
                

    For the budget minded enthusiast, this awesome sport seat has all the great features found in more expensive competition-style seats. Features sleek lines.

    • All-steel frame is TIG-welded
    • Hi-density injection-molded foam
    • "One-Touch" recline/backrest release
    • Backrest positions from fully upright to horizontal
    • Includes forward release for easy access to rear seat
    • Adjustable sliders included
    • Direct-fit bolt-in adapter mounts sold seperately
  • Morris Classic Concepts 60 Inch Universal Lap Belt, with Chrome Buckle
    Morris Classic Concepts 60 Inch Universal Lap Belt, with Chrome Buckle
    x
                

    Replace your missing or damaged lap belts with belts to match our front 3-point seat belts. All come with Grade 8 bolts and SAE washers for mounting.

    • Equips one seat
    • Chrome push-button latch
    • Black webbing
    • Grade 8 hardware included

     

  • Morris Classic Concepts 3-Point Seat Belt Kit, 1967-72 GM Pickup, Bench Seat
    Morris Classic Concepts 3-Point Seat Belt Kit, 1967-72 GM Pickup, Bench Seat
    x
                Safety and comfort come first with these seat belts. Kits come complete  with instructions, Grade 8 mounting hardware and powder-coated mounting  brackets, assembled and ready to bolt into your car. These seat belt  systems mount in the factory mounting holes; no modifications needed.  The top soft sash design looks like "stock" and comes with plastic  clamshell covers. All belts have been safety tested and meet FMVSS  standards! 
    • For bench front seat
    • Modern safety for your classic GM, assembled and ready to bolt into your car
    • Chrome plated buckle with "GM" button
    • Officially licensed product
    • OEM type retractor
    • Black webbing
    • Mount in the factory mounting holes; no modifications needed
    • Kits come complete with:
      • Instructions
      • Grade 8 mounting hardware
      • Powder-coated mounting brackets
  • Morris Classic Concepts 3-Point Bucket Seat Belt Kit, 1967-72 GM Pickup
    Morris Classic Concepts 3-Point Bucket Seat Belt Kit, 1967-72 GM Pickup
    x
                Safety and comfort come first with these seat belts. Kits come complete  with instructions, Grade 8 mounting hardware and powder-coated mounting  brackets, assembled and ready to bolt into your car. These seat belt  systems mount in the factory mounting holes; no modifications needed.  The top soft sash design looks like "stock" and comes with plastic  clamshell covers. All belts have been safety tested and meet FMVSS  standards! 
    • For bucket front seats
    • Modern safety for your classic GM, assembled and ready to bolt into your car
    • Chrome plated buckle with "GM" button
    • Officially licensed product
    • OEM type retractor
    • Black webbing
    • Mount in the factory mounting holes; no modifications needed
    • Kits come complete with:
      • Instructions
      • Grade 8 mounting hardware
      • Powder-coated mounting brackets
  • Garage Sale - Individual Shoulder Harness
    Garage Sale
    Garage Sale - Individual Shoulder Harness
    x
                

    The SFI rating applied to this harness is no longer in use, so these cannot be used for sanctioned racing events.

     

    Date stamped November 2000. 

     

    Includes wrap around adjusters. 

     

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS** 

  • Garage Sale - Individual Shoulder Harness
    Garage Sale
    Garage Sale - Individual Shoulder Harness
    x
                

    The SFI rating applied to this harness is no longer in use, so these cannot be used for sanctioned racing events.

     

    Date stamped April 2000. 

     

    Includes wrap around adjusters. 

     

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS** 

  • Garage Sale - Kirkey 41700V Vintage Class 17 Inch Bucket Seat
    Garage Sale
    Garage Sale - Kirkey 41700V Vintage Class 17 Inch Bucket Seat
    x
                Please view the product's page for more information
            
  • Garage Sale - Sportsman Seat Upholstery Kit
    Garage Sale
    Garage Sale - Sportsman Seat Upholstery Kit
    x
                

    This seat cover is garage sale priced because the seam is coming apart on the lower left of the cover. 

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    Rugged black vinyl quilted upholstery for Sportsman economy fiberglass seat 900-7006.

  • Garage Sale - Uncovered Low Back Seats, Left Side
    Garage Sale
    Garage Sale - Uncovered Low Back Seats, Left Side
    x
                

    We now have our popular low back bucket seats without upholstery so you can have them covered to better match your car. These compact seats come with foam padding so you can cover them any way you choose.

    The backrest of this seat will fold forward for back seat/rear compartment access, and it will recline to a prone position.

    • 24" tall
    • 20-1/2" wide
    • 20" deep
    This seat is garage sale priced because the foam was damaged in shipping.  Does not include the seat tracks.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - Fiberglass Loboy Seat Riser
    Garage Sale
    Garage Sale - Fiberglass Loboy Seat Riser
    x
                

    This is garage sale priced because it has been discontinued. 

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     

    Fiberglass 32 Low Boy seat riser. Gel coating is black. 

  • Garage Sale - Beams Chrome Lift Latch Lap Adjustable DOT Approved Seat Belt, Maroon
    Garage Sale
    Garage Sale - Beams Chrome Lift Latch Lap Adjustable DOT Approved Seat Belt, Maroon
    x
                

    This item is garage sale priced because it's missing the installation kit.  Available as Speedway P/N 91072305.  Color is maroon.

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS**

     

    Chrome lift latch with standard belt.  Maroon.  Lap belts adjustable from 60" to 74". DOT approved. 

    Includes 1.5" long mounting bolts and hardware. These are 1-13/16" wide.

    Specs

    • Sewn side length of belt strap is 32" eye to buckle
    • Adjuster side is 38" of strap length eye to end of strap
    • Provides 32"+ of workable length

     

     

     

  • Garage Sale - Push Button Retractable Lap Belt, Tan
    Garage Sale
    Garage Sale - Push Button Retractable Lap Belt, Tan
    x
                

    This is garage sale priced because it is only the male portion.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

     

    Painted push buckles with retractable type belt. Lap belts adjustable from 60" to 74". DOT approved. 

  • Garage Sale - Sportsman Seat Upholstery Kit
    Garage Sale
    Garage Sale - Sportsman Seat Upholstery Kit
    x
                

    This is garage sale priced because it is dirty from fitment.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

     

    Rugged black vinyl quilted upholstery for Sportsman economy fiberglass seat 900-7006. 

Goto Previous PagePrevious Page
1 2