Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 11

Products

Oiling System

Shop Classic Truck Engines At Speedway Motors

Speedway Motors has high performance classic truck engine parts at everyday low prices. Whether you are building a Small Block Chevy or Ford Flathead, Speedway has you covered with thousands of parts in stock, ready to ship. With everything from pison sets to camshafts, Speedway can feed your need for speed! Complete classic pickup truck crate engines of multiple sizes, like Chevy 305, 350, 383 and others, are available at great prices! We also have a large selection of cylinder heads, crankshafts and roller rocker arms, so make Speedway your classic truck performance engine solution.

Featured Products
  • Weld or Bolt-On Fill Cap
    $14.99
    Product Rating: 4.79 Stars
    Weld or Bolt-On Fill Cap
    (Part #91011036)
    x
                

    Billet aluminum cap and base. Weld or screw to your valve cover, oil tank or rear end. Knurled cap with O-ring seal.

    • 1-1/4" inside diameter
    • 1-1/4"-12 thread pitch

    Note: If using this fill cap in a bolt-on manner, (3) #4 screws/bolts with a countersunk head are required (not included).  Bolt hole size is 1/8".

  • Magnetic Drain Plug
    $3.99
    Product Rating: 5.00 Stars
    Magnetic Drain Plug
    (Part #5500015)
    x
                

    Metal debris can wreak havoc on an engine. Install this plug in your oil pan to catch any metal filings before they get sucked into the oil pump and cause real damage!

    Will fit any oil pan with 1/2-20 threads.

  • Aluminum Box Oil Pan with RH Kick Out for Small Block Chevy
    New
    Aluminum Box Oil Pan with RH Kick Out for Small Block Chevy
    (Part #9402012)
    x
                

    This box aluminum oil pan with kick out is for your Small Block Chevy and high performance racing applications. This item is sold individually.

    • RH Kick out
    • 7 1/2" deep
    • Full windage tray
    • 6 oil control gates
    • Will not work with block mounted starter
  • Finned Oil Filter Covers
    $19.99
    Product Rating: 3.90 Stars
    Finned Oil Filter Covers
    (Part #92517480)
    x
                This finned aluminum cover slides over a stock filter to add a little something extra to your engine compartment. A slit on one side has an allen head cross bolt that clamps the cover onto the oil filter (similar to a hose clamp.)

    Note: Vertical fins on one side only.
  • 1955-1979 Small Block Chevy Aluminum Oil Pan
    1955-1979 Small Block Chevy Aluminum Oil Pan
    (Part #2407100)
    x
                

    Polished, 1-piece cast aluminum finned oil pan, ribbed for beauty, strength and heat dissipation. This pan uses a drivers side dipstick. Includes drain plug and mounting bolts.

  • Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    (Part #577OP55HV)
    x
                

    Thse high-volume oil pumps move 25% more volume than stock volume oil pumps. Pumps are preset to 55-65 psi. Fits Small Block Chevy.

  • Flathead Ford V8 Rear Camshaft Oil Pump Drive Gear
    Flathead Ford V8 Rear Camshaft Oil Pump Drive Gear
    (Part #91016254)
    x
                

    Speedway Motors is your Flathead Ford specialist! We've got you covered down to the smallest components, like this replacement oil pump drive gear. This gear fits on the rear of the camshaft and drives the oil pump. It's designed to fit 1949-1953 engines with D-shaped cam snouts, but can also be used on 1932-1948 style engines by modifying the cam's rear snout.

    • Rear camshaft gear for oil pump drive 
    • Made specifically for 1949-1953 Flathead Ford V-8 cams with D shape
    • Can be used on 1932-1948 engines by modifying the shape of the rear snout of the camshaft
  • Pickup For H.V. Pump, SBC
    $14.99
    Product Rating: 3.00 Stars
    Pickup For H.V. Pump, SBC
    (Part #91715136)
    x
                

    Oil pump pickup is designed to work with our claimer pans and a high volume pump with a 5/8" diameter inlet. Includes mounting tab.

Filter

"Classic Truck, Oiling System" Page 1 of 11

Page 1 of 11

  • Magnetic Drain Plug
    $3.99
    Product Rating: 5.00 Stars
    Magnetic Drain Plug
    (Part #5500015)
    x
                

    Metal debris can wreak havoc on an engine. Install this plug in your oil pan to catch any metal filings before they get sucked into the oil pump and cause real damage!

    Will fit any oil pan with 1/2-20 threads.

  • Holley 302-1 LS Series Retro-fit Oil Pan
    $371.99
    $419.99
    Product Rating: 5.00 Stars
    Holley 302-1 LS Series Retro-fit Oil Pan
    (Part #4253021)
    x
                

    GM's popular LS engines are finding their way into a large variety of vehicles. They make great power, plus they're very durable and reliable. Unfortunately, the factory LS pans don't always fit or they hang too low for today's hot rods. Holley's new LS Retro–fit Engine Oil Pan is designed to help! It provides maximum clearance to the chassis and ground, plus provides an OEM fitment for durability and proper sealing.

    • Provides OEM fitment– OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity and OEM bell-housing attachments
    • Traditional high-quality cast aluminum appearance with clean exterior styling
    • Provides maximum clearance to chassis
    • Cast and machined aluminum
    • Complete kit including sump baffle, pick-up tube, sump plug & oil filter stud
    • Fits GM rear wheel drive applications that were originally equipped with a Small Block or Big Block Chevy engine and traditional rear sump oil pan*

    Holley Oil Pan Installation Instructions (PDF)

    Specs Chart (GIF)

  • Lokar XED-5024 Midnight Series Flex. Engine Dipstick, Holden 253-308
    Lokar XED-5024 Midnight Series Flex. Engine Dipstick, Holden 253-308
    (Part #491XED5024)
    x
                Eliminate expulsion of dipstick. Holds vacuum. Teflon-lined stainless braided outer housing. Flexible inner dipstick measuring cable. Made in the U.S.A. Lifetime warranty.
    • Black Stainless Steel Housing
    • Slim Design Allows Mounting Inside Headers
    • For Use w/Factory Or Sanderson Cast Manifolds
    • E-Z Read Flexible Inner Dipstick Measuring Cable
    • For Accurate Measure Of Engine Oil
    • Lifetime Warranty
  • Champ Pans CP40RB 1986-Up S/B Chevy Stock Appearing Oil Pan, 1-Piece
    Champ Pans CP40RB 1986-Up S/B Chevy Stock Appearing Oil Pan, 1-Piece
    (Part #91015136)
    x
                This stock appearing street oil pan features a 7-1/2" deep rear sump and has one 6" trapdoor, one crank scraper, and a removable horsepower saving windage tray. The oil capacity is 5 quarts with a filter attached.
            
  • Speedway Oil Filter Rock Guard, 6 Inch Long
    Speedway Oil Filter Rock Guard, 6 Inch Long
    (Part #91015166)
    x
                

    Protect your investment with this oil filter rock guard. The short 6" cover fits most standard 1 quart filters. Spun aluminum with clamp.

    Fits these filters:

    • AC Delco PF1218  (Speedway 910-15175)
    • K&N HP2002  (Speedway 465-070025)
    • K&N HP3002  (Speedway 465-070030) 
  • Melling IS-83 High Strength Ford 351W Oil Pump Drive Shaft
    Melling IS-83 High Strength Ford 351W Oil Pump Drive Shaft
    (Part #91550100)
    x
                Driveshaft for 351W Ford oil pumps. This drive shaft is 8.19" length by 5/16" hex.
            
  • 1955-1979 Small Block Chevy Aluminum Oil Pan
    1955-1979 Small Block Chevy Aluminum Oil Pan
    (Part #2407100)
    x
                

    Polished, 1-piece cast aluminum finned oil pan, ribbed for beauty, strength and heat dissipation. This pan uses a drivers side dipstick. Includes drain plug and mounting bolts.

  • Chrome Ford 289-302 Oil Dipstick
    Chrome Ford 289-302 Oil Dipstick
    (Part #7209221)
    x
                

    Stock replacement chrome-plated engine oil dipstick and tube for 260-289-302 Small Block Ford V-8. Installs into the front cover.

    Note: Fits front sump oil pans only.

  • Moroso 25970 Universal Dipstick
    Moroso 25970 Universal Dipstick
    (Part #54525970)
    x
                
    Moroso Universal Dipstick

    Instructions (PDF)

  • Small Block Chevy Stock Volume Oil Pump
    Small Block Chevy Stock Volume Oil Pump
    (Part #577OP55)
    x
                Stock volume oil pump for S/B Chevy. Pump is preset to 55-65 psi and uses a 5/8" diameter pick-up tube.
            
  • Speedway Aluminum Fuel Tank, 3-1/2 Gallon, 8 x 16 Inch
    Speedway Aluminum Fuel Tank, 3-1/2 Gallon, 8 x 16 Inch
    (Part #91076401)
    x
                

    These vintage style brushed aluminum gas tanks are the perfect finishing touch for your pride and joy. Each has a knurled non-vented cap, two 3/8" NPT female fittings on the top and one 3/4" NPT female fitting on the bottom. Mounting brackets sold separately.

    • Has a knurled non-vented cap, two 3/8" NPT female fittings on the top and one 3/4" NPT female fitting on the bottom
    • Mounting brackets sold separately
    • Brushed aluminum finish 
    • 3-1/2 gallon, 16" x 8"
  • 1986-Up Small Block Chevy Aluminum Oil Pans
    1986-Up Small Block Chevy Aluminum Oil Pans
    (Part #2407102)
    x
                

    Fits Small Block Chevy. Polished aluminum oil pan, ribbed for beauty, strength and heat dissipation.

    This pan uses a passenger side dipstick and a one-piece rear main seal crankshaft. Includes drain plug and mounting bolts.

    They are 1 piece cast aluminum construction.

  • Twist-On Chrome Oil Filler Tubes
    Twist-On Chrome Oil Filler Tubes
    (Part #91017099)
    x
                

    Trick looking chrome oil filler extension tubes. Attach to any valve cover filler holes. Twist-on style.

    Extends up to 4-1/2" from the valve cover. There is no baffle inside the tube. Outside diameter is 1-3/4". Inside diameter is 1-1/4".

    Top is notched to accept a twist on cap or breather. There is no breather cap included. Reuse your existing breather or cap. A push-in breather can also be used with a grommet. There will be a gap at the end where the tabs for the push in style caps' wing tabs would go.

  • ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    (Part #101RPS1)
    x
                For S/B Chevy only. Heat treated Chromoly steel. Comes with grade 8 nut and heat treated washer.
            
  • LS Low Oil Level Sensor Plug
    $19.99
    LS Low Oil Level Sensor Plug
    (Part #481202)
    x
                

    There's a pretty good chance you aren't using the low oil level sensor that is sticking out of the oil pan on your LS engine. These plugs replace the sensor and clean the pan up. Fits 99-up Vortec and 97-up Corvette and F-body LS1 oil pans.

    • Thread Diameter:  20mm O.D. (25/32")
    • Wrench Size:  1"
  • Lokar XED-5013 Midnight Series Flexible Engine Dipstick, 302 Ford
    Lokar XED-5013 Midnight Series Flexible Engine Dipstick, 302 Ford
    (Part #491XED5013)
    x
                Black stainless steel housing. Slim design allows mounting inside the headers. For use with factory or sanderson cast manifolds. E-Z read flexible inner dipstick measuring cable. For Accurate measure of engine oil. Made in the U.S.A. Lifetime warranty.
    • Black Stainless Steel Housing
    • Slim Design Allows Mounting Inside Headers
    • For Use w/Factory Or Sanderson Cast Manifolds
    • E-Z Read Flexible Inner Dipstick Measuring Cable
    • For Accurate Measure Of Engine Oil
    • Lifetime Warranty
  • Lokar ED-5010 Engine Dipstick, Early 289-302 Small Block Ford
    Lokar ED-5010 Engine Dipstick, Early 289-302 Small Block Ford
    (Part #4915010)
    x
                

    Lokar manufactures the best dipstick you can buy for your early 289-302 Small Block Ford (SBF). Goes into timing cover.

    • Constructed of billet aluminum and braided stainless
    • Mounting brackets are chromed steel

     

  • Small Block Ford Front Sump Chrome Oil Pan
    Small Block Ford Front Sump Chrome Oil Pan
    (Part #91017703)
    x
                This chome front-sump pan for the Ford 289-302 is App. 8" deep at the lowest point, which is at the bottom of the drainplug.  It is a standard capacity pan.  The sump is app. 6" from front-to-back, and the pan is 4" deep at the rear.
            
  • Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    (Part #577OP55HV)
    x
                

    Thse high-volume oil pumps move 25% more volume than stock volume oil pumps. Pumps are preset to 55-65 psi. Fits Small Block Chevy.

  • Straight Oil Pressure Gauge Extended Fitting, 1/8 Inch NPT to AN4
    Straight Oil Pressure Gauge Extended Fitting, 1/8 Inch NPT to AN4
    (Part #6174070)
    x
                

    We all know how hard it is to get at that oil pressure fitting on the back of the block. Oil gauge extension is 1/8" NPT to AN4. 

    • 1/8" NPT to nut is 1.32"
    • Nut thickness is .25"
    • AN4 to nut is .75"
Goto Previous PagePrevious Page
1 2 3 4 5 ... 11