Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck Electrical Wiring & Lights At Speedway Motors

Speedway Motors is your one stop shop for Classic Truck wiring and lighting. Make wiring your truck simple with easy-to-use wiring harnesses and step by step instructions. Finish off your classic pickup with specialty headlights, LED dome lights, and LED blue dot tail lights. Find anything from various switches, sensors and relays to hidden radio antennas on the online catalog and let Speedway Motors eliminate any and all of your Classic Truck electrical system problems!

"Classic Truck, Lighting, Exterior" Page 1 of 5

  • 1933-34 Ford Car, 1935-37 Ford Truck Headlight Mount Pads
    1933-34 Ford Car, 1935-37 Ford Truck Headlight Mount Pads
    x
                

    These headlight mount gasket pads fit '33-'34 Ford passenger cars as well as '35-'37 Ford pickup trucks.  They are rubber construction and are not visible when properly installed.  Use these rubber gaskets to ensure a tight seal.

    • OEM replacements
    • 1933-'34 Ford passenger cars and 1935-'37 Ford pickups
    • Rubber construction
    • Sold as a pair
  • Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    x
                

    Those other super bright, super high powered tail light bulbs may be easy to see, but they also generate enough heat to discolor your lens and burn the paint.

    Halogen tail light bulbs are brighter than standard bulbs, but use less energy, which means they burn cooler. 12 volt only.

    This bulb is shorter than a 1157 bulb and measures only 1-3/4" from bottom to end of the tip. From the pin to tip is 1-1/2".



     

  • Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    x
                

    Speedway's 7" replacement Fluted H4 Headlights allow you to have "the look" with out breaking the bank. Features a chrome plated plastic reflector with a glass lens and an "amber" turn signal lens. Includes a H4 Halogen bulb.

    These headlights have a separate 94-style single filament bulb which can be used as a turn signal or a running lamp (not both). 

    • 6-5/8" headlight O.D.
    • Wiring pigtail for turn/running light is included
    • Wiring pigtail for headlight NOT included
    • Uses common 3-prong headlight plug-in

    Headlight Wiring Chart (GIF)

    Installation Instructions (PDF)  

  • 1938-1956 Ford Pick-up Tail Light Brackets, Stainless Steel
    1938-1956 Ford Pick-up Tail Light Brackets, Stainless Steel
    x
                

    These stainless steel tail light brackets are designed to fit 1938-1956 Ford pick-ups and 1953-1956 Ford cars. They work for either left or right side. Sold Each

    • 1938-1956 Ford Pick-ups
    • 1953-1956 Cars
    • Left and Right Side
    • Stainless Steel

    Note: The dimensions on these brackets are: Tail light mount holes 1-3/4"on center, Bracket mount holes 2"on center, overall bracket width 6". With mount centers for the tail lights at 1-3/4".

    These brackets will accept the Model A tail lights (91127001), the ’32 tail lights (91137005), or the 33-36 tail lights (91137018) and also the same lights in the LED part numbers.

     

  • Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Red Glass
    Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Red Glass
    x
                These reproduction red glass tail light lens are for 1933-1936 Ford cars  and 1945-1952 pickup trucks.  They are for the passenger side and feature specs of the originals. 
    • OEM replacement
    • Red glass lens
    • 1933-1936 Ford cars and 1945-1952 pickups
    • Fit passenger side
    • Sold each
  • LED License Plate Bolt Light
    $14.99
    Product Rating: 4.17 Stars
    LED License Plate Bolt Light
    x
                

    These LED bolts can be used to add some style to your license plate frame, or anywhere else on your car for that matter. The possibilities are endless. Features a chrome metal housing which is 1.24" in overall length with a threaded stud and nut for mounting. 12V or 6V operation, but they are much brighter with 12V. 

    • LED lighted bolts
    • Chrome metal housing
    • 1.24" in overall length
    • 36" wire length
    • Threaded stud and nut for mounting
    • 12V or 6V operation but much brighter with 12V
    • Available in a selection of colors.
    • These lights are sold as a pair. 
    • Choose from colors: blue, green, red, purple, yellow, white, or amber
  • 1934 Ford Headlights
    $309.99
    Product Rating: 5.00 Stars
    1934 Ford Headlights
    x
                Polished stainless steel. 12 volt H-5 bulb behind original lens, reflector with mounting studs. 9-1/4" diameter. Halogen bulb.
  • 1939 Chevy LED Taillight Lens
    $24.99
    $29.99
    1939 Chevy LED Taillight Lens
    x
                These red LED tail light lenses are replacements for your 1939  Chevy   passenger car.  
    • Original replacements
    • 1939 Chevy passenger car
    • Red plastic lens with 17 red LEDs
    • Sold each
    • 2-5/8" in diameter
    • 3/4" deep
    • Bezel is 1"
  • Stainless License Plate Light
    Stainless License Plate Light
    x
                
    • Fully polished stainless steel housing
    • 12 volt operation
    • Mounting hardware included
    • Uses common replaceable wedge-type dashlight bulb
  • 1940-1953 Chevy Truck LED Tail Lights
    1940-1953 Chevy Truck LED Tail Lights
    x
                

    These 12 volt LED tail lights fit most 1940-1953 Chevrolet trucks that use two staggered bolts on the rear for mounting. A total of 45 super bright red LED's mount in a stainless steel housing.

    • Polycarbonate Lens
    • The left drivers side taillight has a license plate 6 LED light.
    • The right passenger side taillight does not have a license plate light.


    Note: A LED flasher is only required when all the lights on the vehicle are LED.

    1940-1953 Chevy Truck Tail Light Installation Instructions (pdf)

  • Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Blue Dot
    Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Blue Dot
    x
                

    These replacement red glass tail light lens are for 1933-1936 Ford cars and 1945-1952 pickup trucks.  They are for the passenger side and feature the classic Lynx-Eye blue dot in the center.  Gives a bright lavender appearance when brake light comes on.

    • Original replacement
    • Red glass lens
    • Classic Lynx-Eye blue dot in center
    • 1933-1936 Ford cars and 1945-1952 pickups
    • Sold each
  • Hagan Street Rods 4-3RDLED 4 Inch Flush-Fit Third Brake Light
    Hagan Street Rods 4-3RDLED 4 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 15 super bright red LED's
    • Lens is 1/2" by 4"
    • Comes with T bolts to hold housing in place
  • Stainless Steel Tear Drop 12 Volt Fog Light, Amber Lens
    New
    Stainless Steel Tear Drop 12 Volt Fog Light, Amber Lens
    x
                These tear drop style fog lights feature a beautiful stainless steel housing with  an Amber lens.  They also include adjustable mounting and a replaceable  H3 35 watt bulb, and are perfect for your vintage street rod or custom  ride. 
    • Stainless steel Housing With Universal Ball & Cup Adjustable Mounting
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt
  • 1930-31 Ford Model A Dropped Headlight Bar, Stainless
    1930-31 Ford Model A Dropped Headlight Bar, Stainless
    x
                

    These dropped style stainless steel headlight bars are for 1930-1931 Fords.  They feature a 4 inch drop and connect fender to fender to support your headlights, just like the originals.  These bars come with a highly polished stainless finish.

    • 1930-31 Fords
    • Top width (flange tip to flange tip) 43"
    • Bottom width (flange tip to flange tip) 38-3/4"
    • 43-1/8" Long
    • OEM # A-13114-BD
    • Highly Polished Stainless Steel 4" Dropped Headlight Bars for Street Rods

    Note: If you intend to use this light bar on your 1930-31 Model "A" using a 1932 grille shell and insert, it will require considerable modification. The 1932 grille insert has a "V" shape, while the 1931 grille does not. The modifications required include cutting, welding, bending and polishing.

  • Halogen Tail Light Bulbs, 1156 Straight Mounting Pins
    Halogen Tail Light Bulbs, 1156 Straight Mounting Pins
    x
                Those other super bright, super high powered tail light bulbs may be easy to see, but they also generate enough heat to discolor your lens and burn the paint. 

    Halogen bulbs are brighter than standard bulbs, but use less energy, which means they burn cooler. 12 volt only.

    This bulb is shorter than a 1156 bulb and measures only 1-3/4" from bottom to end of the tip. From the pin to tip is 1-1/2".


     


  • Hagan Street Rods fm4SSA-LEDH Flush Mount Tail Lights Amber Slot 4x.5
    Hagan Street Rods fm4SSA-LEDH Flush Mount Tail Lights Amber Slot 4x.5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 4" x 0.5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • 1156 LED Tail Light Bulb, 1 Inch, Red
    1156 LED Tail Light Bulb, 1 Inch, Red
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1156 bulbs have the pins straight across and a single contact on the plug. The bulbs appear to be clear, but are red when illuminated.

    LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.) LED lights require so little “juice” that the conventional flasher can’t cope.

    These LED bulbs are made to serve as a conversion replacement for old damaged or missing original bulbs.  They essentially work the same but with greater quality and brighter, clearer light. They can be used as a running light, a brake light, or both.

    • 12 Volt Bulb
    • 1156 bulbs have the pins straight across and a single contact on the plug
    • Red when illuminated
    • 1" Diameter
    • Efficient and use such small amounts of power
    • Requires the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong)
  • Replacement 7 Inch Fluted Headlights
    Replacement 7 Inch Fluted Headlights
    x
                

    Here's a slick 7" replacement tri-bar style headlight bulb that will outperform your old sealed beam headlights. In the past, tri-bar headlights looked good but performed terribly. These upgraded headlights feature high powered quartz halogen H4 bulbs and a newly designed curved lens and fluted reflector for improved lighting and better visibility. Chrome plated, molded plastic housing with a glass lens.

    The perfect addition to a retro-rod or a sleek new street machine. Will directly replace 6014 sealed beam headlamps.

    Wiring Chart (GIF)

  • EMPI 9414 Cal-Look Amber Turn Signals, 2-1/2 Inch Diameter, Pair
    EMPI 9414 Cal-Look Amber Turn Signals, 2-1/2 Inch Diameter, Pair
    x
                

    Complete with housing, these turn signal assemblies feature single filament 12-Volt bulbs, seals and wire for proper installation.  The simple design allows these signals to be universally mounted as well. 

    • Single filament 12-Volt bulbs
    • Amber lens color
    • 2-1/2" diameter
    • Includes housing, seal, wiring
    • Sold as a pair
  • Super Bright Power Bulbs, Offset
    Super Bright Power Bulbs, Offset
    x
                12 volt stock replacement for use with old styled glass lenses. Super Power (50 candlepower), for more visibility. Use on side and taillights. With offset mounting pins.

    This bulb has two filaments and two contact points. It will not work properly in an 1156 socket.

    Never touch these bulbs with bare fingers! Smudges and skin oil will cause quick bulb failure. Wipe them with a cloth containing rubbing alcohol before use!

  • Hagan Street Rods fm8 3rdLED 8 Inch Flush-Fit Third Brake Light
    Hagan Street Rods fm8 3rdLED 8 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 30 super bright red LED's
    • Lens is 1/2" by 8"
    • Comes with T bolts to hold housing in place
  • 1934 Ford Commercial Headlilghts, 12V Halogen, W/ Turn Signal
    1934 Ford Commercial Headlilghts, 12V Halogen, W/ Turn Signal
    x
                These turn signal conversion commercial headlights are the perfect upgrade for your 1933-34 Ford.  They feature 12 volt halogen bulbs with turn signal bulbs included inside the headlamp.  These headlights are a standard 1934 Ford size at 9-1/2" diameter.
    • 12 Volt halogen bulbs
    • Turn signal bulbs hidden inside
    • Original style lens with mounting studs
    • Primered housing bucket with stainless steel rim
    • 9-1/2" diameter
    • Sold as a pair
  • 1939 Chevy Chrome Taillight Trim Ring
    1939 Chevy Chrome Taillight Trim Ring
    x
                These chrome tail light trim rings are replacements for your 1939  Chevy  passenger car.
    • Original replacements
    • 1939 Chevy passenger car
    • Chrome plated
    • Sold each
  • 1939 Chevy Taillight Gasket, Cork
    1939 Chevy Taillight Gasket, Cork
    x
                These cork tail light lens gaskets are replacements for your 1939  Chevy  passenger car.
    • Original replacements
    • 1939 Chevy passenger car
    • Cork material
    • Sold each
  • LED 1157 Tail Light Bulb, 1 Inch, Red
    LED 1157 Tail Light Bulb, 1 Inch, Red
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear, but are red when illuminated.

    LED taillight bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LEDs will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)

     

  • Speedway 7 Inch Tri-Bar Headlights w/ Clear Turn Signal Lens
    Speedway 7 Inch Tri-Bar Headlights w/ Clear Turn Signal Lens
    x
                

    Speedway's traditional Tri-Bar H4 Halogen headlights allow you to have "the look" with out breaking the bank. Features a chrome plated, high impact plastic housing with a thick glass lens.

    The separate 94-style single filament bulb can be used as a turn signal or park light (not both). This filament appears clear but it glows amber when in use. 

    • 6-5/8" Headlight O.D.
    • High and Low beams
    • 12 volt H4 bulb included
    • Running light pigtail included
    • Headlight pigtail NOT included
    • Uses common 3-prong connector

    Headlight Wiring Chart (GIF)

    Installation Instructions (PDF)  


  • Ford 1941 Car, 1948-1956 Pickup Truck Tail Light Lens, Red Glass
    Ford 1941 Car, 1948-1956 Pickup Truck Tail Light Lens, Red Glass
    x
                

    Replace those old, cracked, or missing tail lights with these red glass lens.  They are reproductions for your 1941 Ford passenger car and 1948-1956 Ford pickup truck. 

    • Original replacements
    • 1941 Ford passenger car and 1948-1956 Ford pickup
    • Red glass lens
    • Sold each

     

  • Hagan Street Rods fm8OVR-LEDH Flush Mount Tail Lights Red Oval 8 x 1
    Hagan Street Rods fm8OVR-LEDH Flush Mount Tail Lights Red Oval 8 x 1
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 8" x 1" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fmTD6R-LEDH Flush Mount Tail Lights Teardrop 6 x .75
    Hagan Street Rods fmTD6R-LEDH Flush Mount Tail Lights Teardrop 6 x .75
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 6" x .75" x 0.25" thick
    • Steel face plate is 18 gauge mild steel
    • Boxes are 1-5/8" deep x 2" wide x 9" long

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • 1933-1936 Ford Stainless Tail Lights
    1933-1936 Ford Stainless Tail Lights
    x
                

    These are an exact duplicate of the original 1933-1936 Ford car glass lens tail lights. Also fits later model pick-ups and wagons. Left light has a lens to illuminate the license plate.

    • Highly polished stainless steel housing & rim
    • Cloth braided wire loom
    • Stainless steel screws
    • 12 volt bulb
    • Red glass lens
    • Choose right or left
  • Delta 01-1179-50X Classic 7 In. Headlights w/Xenon Bulb, Replace H6024
    Delta 01-1179-50X Classic 7 In. Headlights w/Xenon Bulb, Replace H6024
    x
                

    Delta developed Classic headlight replacements for the stock headlights. This headlight is powered by the Xenon Gas filled replaceable bulbs H4 60/55 Watt which will outperform stock headlight 4 to 1. The Headlights feature European prismatic lead-crystal lens, vacuum metalized steel reflector, Xenon bulbs, rubber boot protecting the optics from moisture and elements. 7" classic with xenon - replaces H6024.

    • Bulb color: Clear
    • Wattage: 55/60w
    • Light Source: Xenon
    • Mount Type: Headlight Ring
    • Finish: Black
    • Housing Material: Metal
    • Set includes:
      • (2) headlights
      • (2) H4 Xenon bulbs 60/55 Watt
      • (2) rubber boots
      • Hi/Lo Beam

     

  • Hagan Street Rods fm10SSR-LEDH Flush Mount Tail Lights Red Slot 10x.5
    Hagan Street Rods fm10SSR-LEDH Flush Mount Tail Lights Red Slot 10x.5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 10" x .5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Replacement 6 Volt Fog Light Bulb, Clear
    New
    Replacement 6 Volt Fog Light Bulb, Clear
    x
                These vintage style fog lights are replacement for our fog light assemblies (91130653, 91130654, 911364007, and 911364008).  They feature a clear lens, and are perfect for your vintage street rod or custom  ride. 
    • Replacement for our 6 volt fog light assemblies
    • Clear lens
    • Vintage Lens Pattern Design From the 1940's
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt
  • 1937 Ford Blue Dot Tail Light Lens, Passenger Car
    1937 Ford Blue Dot Tail Light Lens, Passenger Car
    x
                

    These replacement red glass tail light lens are for 1937 Ford cars.  They are for the passenger side and feature the classic Lynx-Eye blue dot in the center.  Gives a bright lavender appearance when brake light comes on.

    • Original replacement
    • Red glass lens
    • Classic Lynx-Eye blue dot in center
    • 1937 Ford cars only
    • 3" diameter
    • Sold each

    Note: The 1937 blue dot tail light lens is held into the housing by a metal ring around the outside of tail light housing, which captures the lens lip and housing lip together.

  • Delta 01-1189-SMDA Classic 7 Inch Headlights w/Xenon Bulb/LED Blinkers
    Delta 01-1189-SMDA Classic 7 Inch Headlights w/Xenon Bulb/LED Blinkers
    x
                

    Delta developed Classic headlight replacements for the stock headlights. This headlight is powered by the Xenon Gas filled replaceable bulbs H4 60/55 Watt which will outperform stock headlight 4 to 1. The Headlights feature European prismatic lead-crystal lens, vacuum metalized steel reflector, Xenon bulbs, rubber boot protecting the optics from moisture and elements.  Delta Classic 7" w/xenon and turn signal.

    • Bulb color: Clear
    • Wattage: 55/60w
    • Light Source: Xenon
    • Mount Type: Headlight Ring
    • Finish: Black
    • Housing Material: Metal
    • Set includes:
      • (2) headlights
      • (2) H4 Xenon bulbs 60/55 Watt
      • (2) rubber boots
      • Built-in high output amber LED turn signals
      • Hi/Lo Beam

     

  • 1157 LED Tail Light Bulb, 1-3/4 Inch, Red
    1157 LED Tail Light Bulb, 1-3/4 Inch, Red
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The tail light bulbs appear to be clear, but are red when illuminated.

    LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.) 

  • Rectangular Pony Light, Red Lens
    Rectangular Pony Light, Red Lens
    x
                These pony lights are a great addition to your street rod or custom  application.  They are designed to be used as either a running light or a  turn signal.  
    • Takes BP1445 SINGLE filament bulb. 
    • Includes L-shaped mount bracket.
    • Use as either a running light or turn signal
    • Chrome plated with plastic lens
  • 1953-56 Ford Pickup Bed Rail Roll Tail Lights
    1953-56 Ford Pickup Bed Rail Roll Tail Lights
    x
                

    These neat little lights take advantage of the openings on the ends of your bed rolls- space that is otherwise wasted. The simple-to-install LED lights provide extra safety by augmenting your existing tailights, turn signals, and brake lights. The aluminum housings come polished, but can also be painted to match your truck.

    These top bed tail lights for 53-56 Ford pickups are made from quality aluminum and work with a 12 volt system.  They are 2" in length and 1.39" in diameter with a 1-1/4" hole diameter.

    • Top bed rail lights for 53-56 Ford pickups
    • Aluminum body
    • LED lighting
    • 1.25 OD
  • Lokar 1110154 Billet Safety LED Taillight for Lokar Dial-in Board, POL
    Lokar 1110154 Billet Safety LED Taillight for Lokar Dial-in Board, POL
    x
                

    Billet Aluminum Safety LED Taillight
    Features:

    • 1 1/4" Billet 6061-T6 aluminum taillight housing
    • Taillight housing bolts directly to Lokar Dial-In Board or can be mounted in a universal location
    • Taillight wiring can be hidden in machined slot on Lokar Dial-In Board
    • Color and style match Lokar Dial-In Board
    • Available in black, polished and clear finish
    • Stainless steel mounting hardware
    • Long-life LED illuminates to red for safety
  • 1968-72 Chevy Truck LED Side Marker Light, Amber
    1968-72 Chevy Truck LED Side Marker Light, Amber
    x
                
    • 18 super bright LEDs
    • Complete with polycarbonate lens
    • Epoxy coated, fully sealed electronics
    • Solid state circuit boards are designed for 7.7-14.0 VDC
    • Dual function, parking light and turn signal
    • Looks original with deluxe stainless trim
Goto Previous PagePrevious Page
1 2 3 4 5