Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors is your one stop shop for Classic Truck wiring and lighting. Make wiring your truck simple with easy-to-use wiring harnesses and step by step instructions. Finish off your classic pickup with specialty headlights, LED dome lights, and LED blue dot tail lights. Find anything from various switches, sensors and relays to hidden radio antennas on the online catalog and let Speedway Motors eliminate any and all of your Classic Truck electrical system problems!

"Classic Truck, Lighting, Exterior" Page 1 of 5

  • Stainless License Plate Light
    Stainless License Plate Light
    x
                
    • Fully polished stainless steel housing
    • 12 volt operation
    • Mounting hardware included
    • Uses common replaceable wedge-type dashlight bulb
  • 1930-31 Ford Model A Dropped Headlight Bar, Stainless
    1930-31 Ford Model A Dropped Headlight Bar, Stainless
    x
                

    These dropped style stainless steel headlight bars are for 1930-1931 Fords.  They feature a 4 inch drop and connect fender to fender to support your headlights, just like the originals.  These bars come with a highly polished stainless finish.

    • 1930-31 Fords
    • Top width (flange tip to flange tip) 43"
    • Bottom width (flange tip to flange tip) 38-3/4"
    • 43-1/8" Long
    • OEM # A-13114-BD
    • Highly Polished Stainless Steel 4" Dropped Headlight Bars for Street Rods

    Note: If you intend to use this light bar on your 1930-31 Model "A" using a 1932 grille shell and insert, it will require considerable modification. The 1932 grille insert has a "V" shape, while the 1931 grille does not. The modifications required include cutting, welding, bending and polishing.

  • LED 1157 Tail Light Bulb, 1 Inch, Red
    LED 1157 Tail Light Bulb, 1 Inch, Red
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear, but are red when illuminated.

    LED taillight bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LEDs will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)

     

  • 1947-53 Chevy Pickup Bed Roll Lights
    1947-53 Chevy Pickup Bed Roll Lights
    x
                

    These neat little lights take advantage of the openings on the ends of your bed rolls- space that is otherwise wasted. The simple-to-install LED lights provide extra safety by augmenting your existing tailights, turn signals, and brake lights. The aluminum housings come polished, but can also be painted to match your truck.

    Has a 1.625" body O.D. and 2.00" overall length.

  • Interior-License Plate Light
    Interior-License Plate Light
    x
                Chrome plated. 12 volt. Measures 1-1/4" diameter. 
            
  • Replacement Lens for Tri-Bar Headlights 91101004
    Replacement Lens for Tri-Bar Headlights 91101004
    x
                

    These replacement tri-bar headlight lens feature a 7" diameter. Curved lens is fluted for superior driving vision. They are replacement for our tri-bar headlight assemblies (91101004).

    • 7" diameter
    • Curved lens is fluted for superior driving vision
    • Replacement for tri-bar headlight (91101004)
  • Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    x
                

    No, this is not just another headlight conduit! This is Lokar's design technology for "U-Cut-to-Fit", non-kinking stainless steel headlight braid. Designed with threaded steel studs to insure that you won't experience any of the typical separation between braid and fitting that shows unsightly wires out in the open. Pull, tug or bump your headlight braid and it will stay in place, leaving you with protected wires and a clean set up. Kit comes complete with two 14" flexible braided stainless steel Teflon-lined housings, threaded STEEL studs, billet aluminum fittings, aluminum grill shell washers and four 26" headlight wires.

    • Non-kinking stainless steel
    • Threaded steel studs to insure no separation between braid and fitting
    • Comes complete with:
      • (2)Two 14" flexible braided stainless steel Teflon-lined housings
      • Threaded STEEL studs
      • Billet aluminum fittings
      • Aluminum grill shell washers
      • (4)Four 26" headlight wires
  • Headlight Trim Rings, 1940 Ford/Mercury Deluxe, 1940-41 Ford Pickup, Chrome
    Headlight Trim Rings, 1940 Ford/Mercury Deluxe, 1940-41 Ford Pickup, Chrome
    x
                These chrome headlight rims are reproductions designed to fit 1940 Ford/Mercury passenger cars and 1940-41 Ford pickup trucks. 
    • Original replacements
    • Chrome plated
    • 12" x 9-1/2"
    • Fits:
      • 1940 Deluxe
      • 1940-1941 Pickup
      • 1940 Mercury

    Be sure to include our park lamp lens and gasket sets with these headlamp bezels. 

  • Quartz Halogen Headlight Conversion Kit
    Quartz Halogen Headlight Conversion Kit
    x
                

    Are you wanting to run a set of vintage headlights on your car or truck, but are wondering how to make them work again? This kit will solve the problem! Simply remove the existing socket from the reflector and drill out the hole to 1" in diameter. Then install the new 12 volt H-4 quartz halogen bulb into your reflector and secure it with the included press nut and retainer clip. After wiring up the new connectors, you'll be ready to ride.

    Complete kit comes with 2 halogen bulbs, adaptors, hardware and instructions. Fits most stock headlights.

    • Keep factory/vintage appearance with greatly improved lighting
    • Convenient solution for 6 volt to 12 volt electrical system upgrades
    • Features modern H-4 quartz halogen bulbs
    • 60 watt high beam, 55 watt low beam
    • Fits most headlight housings

    911-21001 Instructions (PDF)

  • DEi 030302 LED Lite'N Boltz License Plate Lighting Kit, Satin Dome Head, 2 Piece
    DEi 030302 LED Lite'N Boltz License Plate Lighting Kit, Satin Dome Head, 2 Piece
    x
                

    LED License Plate Lighting Kits with their right-angle LED, are extremely efficient and emit a much higher degree of light in a desired location than incandescent lamps. Since there’s no filament that can be damaged, LEDs are incredibly durable-virtually shock and vibration-proof.

    • Meets legal requirements without compromising great looks
    • Use anywhere accent lighting is desired
    • Accent lighting for hot rods, motorcycles, boats, ATVs, RVs, personal watercraft, pickup trucks, 4x4's, 18-wheelers and even industrial applications
    • 12-Volt lighted button head bolts
    • Measure 5/16" x 3/4"
    • 9/16" Outside diameter of button head
    • Made of high-grade stainless steel
    • Offer superior lighting
    • Clear epoxy covered lens-waterproof protection
    • .30MA current, 0.36 watts
    • Lights instantly
    • Perfect for license plate relocation projects

    030302 Lite'N Boltz Instructions (PDF) 

    Lite'N Boltz Frequently Asked Questions (PDF) 

  • Universal Compact Double Filament Tail Light Bulb
    Universal Compact Double Filament Tail Light Bulb
    x
                

    Compact dual filament tail light bulb with 1157 style base (with offset pins). Same function as a 1157 bulb, but with a smaller bulb. Universal replacement bulb for tail light applications. Measures 1-1/2" from bottom to the top.

    Works as a replacement bulb for accessory lights 316-0175 and 316-0176.

  • 1940-1953 Chevy Truck LED Tail Lights
    1940-1953 Chevy Truck LED Tail Lights
    x
                

    These 12 volt LED tail lights fit most 1940-1953 Chevrolet trucks that use two staggered bolts on the rear for mounting. A total of 45 super bright red LED's mount in a stainless steel housing.

    • Polycarbonate Lens
    • The left drivers side taillight has a license plate 6 LED light.
    • The right passenger side taillight does not have a license plate light.


    Note: A LED flasher is only required when all the lights on the vehicle are LED.

    1940-1953 Chevy Truck Tail Light Installation Instructions (pdf)

  • Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Blue Dot, Red Glass
    Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Blue Dot, Red Glass
    x
                

    These replacement red glass tail light lens are for 1933-1936 Ford cars and 1945-1952 pickup trucks.  They are for the passenger side and feature the classic Lynx-Eye blue dot in the center.  Gives a bright lavender appearance when brake light comes on.

    • Original replacement
    • Red glass lens
    • Classic Lynx-Eye blue dot in center
    • 1933-1936 Ford cars and 1945-1952 pickups
    • Sold each
  • LED License Plate Bolt Light
    $14.99
    Product Rating: 4.00 Stars
    LED License Plate Bolt Light
    x
                

    These LED bolts can be used to add some style to your license plate frame, or anywhere else on your car for that matter. The possibilities are endless. Features a chrome metal housing which is 1.24" in overall length with a threaded stud and nut for mounting. 12V or 6V operation, but they are much brighter with 12V. 

    • LED lighted bolts
    • Chrome metal housing
    • 1.24" in overall length
    • 36" wire length
    • Threaded stud and nut for mounting
    • 12V or 6V operation but much brighter with 12V
    • Available in a selection of colors.
    • These lights are sold as a pair. 
    • Choose from colors: blue, green, red, purple, yellow, white, or amber
  • 1940 Ford Deluxe Park Lamp Lenses
    1940 Ford Deluxe Park Lamp Lenses
    x
                

    Glass lenses - just like the originals. Fits 1940 Ford Deluxe, 1940-1941 Ford pickup and 1940 Mercury.

    Includes cork/rubber gaskets.

  • Speedway 7 Inch Tri-Bar Headlights
    Speedway 7 Inch Tri-Bar Headlights
    x
                

    Speedway's traditional Tri-Bar H4 Halogen headlights allow you to have "the look" with out breaking the bank. Features a chrome plated, high impact plastic housing with a thick glass lens. These headlights do have high and low beams, but they DO NOT have turn signals.

    • 6-5/8" Headlight O.D.
    • High and Low beams
    • 12 volt H4 bulb included
    • Headlight pigtail NOT included
    • Uses common 3-prong connector

    Headlight Wiring Chart (GIF)

    Installation Instructions (PDF)  

    NOTE: These headlights cannot make use of our L.E.D. Turn Signal Indicator for H-4 Bulbs, item # 910-64150.
  • 1933-34 Ford Car, 1935-37 Ford Truck Headlight Mount Pads
    1933-34 Ford Car, 1935-37 Ford Truck Headlight Mount Pads
    x
                

    These headlight mount gasket pads fit '33-'34 Ford passenger cars as well as '35-'37 Ford pickup trucks.  They are rubber construction and are not visible when properly installed.  Use these rubber gaskets to ensure a tight seal.

    • OEM replacements
    • 1933-'34 Ford passenger cars and 1935-'37 Ford pickups
    • Rubber construction
    • Sold as a pair
  • Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    x
                

    Those other super bright, super high powered tail light bulbs may be easy to see, but they also generate enough heat to discolor your lens and burn the paint.

    Halogen tail light bulbs are brighter than standard bulbs, but use less energy, which means they burn cooler. 12 volt only.

    This bulb is shorter than a 1157 bulb and measures only 1-3/4" from bottom to end of the tip. From the pin to tip is 1-1/2".



     

  • Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    x
                

    Speedway's 7" replacement Fluted H4 Headlights allow you to have "the look" with out breaking the bank. Features a chrome plated plastic reflector with a glass lens and an "amber" turn signal lens. Includes a H4 Halogen bulb.

    These headlights have a separate 94-style single filament bulb which can be used as a turn signal or a running lamp (not both). 

    • 6-5/8" headlight O.D.
    • Wiring pigtail for turn/running light is included
    • Wiring pigtail for headlight NOT included
    • Uses common 3-prong headlight plug-in

    Headlight Wiring Chart (GIF)

    Installation Instructions (PDF)  

  • 1938-1956 Ford Pick-up Tail Light Brackets, Stainless Steel
    1938-1956 Ford Pick-up Tail Light Brackets, Stainless Steel
    x
                

    These stainless steel tail light brackets are designed to fit 1938-1956 Ford pick-ups and 1953-1956 Ford cars. They work for either left or right side. Sold Each

    • 1938-1956 Ford Pick-ups
    • 1953-1956 Cars
    • Left and Right Side
    • Stainless Steel

    Note: The dimensions on these brackets are: Tail light mount holes 1-3/4"on center, Bracket mount holes 2"on center, overall bracket width 6". With mount centers for the tail lights at 1-3/4".

    These brackets will accept the Model A tail lights (91127001), the ’32 tail lights (91137005), or the 33-36 tail lights (91137018) and also the same lights in the LED part numbers.

     

  • Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Red Glass
    Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Red Glass
    x
                These reproduction red glass tail light lens are for 1933-1936 Ford cars  and 1945-1952 pickup trucks.  They are for the passenger side and feature specs of the originals. 
    • OEM replacement
    • Red glass lens
    • 1933-1936 Ford cars and 1945-1952 pickups
    • Fit passenger side
    • Sold each
  • 1934 Ford Headlights
    $309.99
    Product Rating: 5.00 Stars
    1934 Ford Headlights
    x
                Polished stainless steel. 12 volt H-5 bulb behind original lens, reflector with mounting studs. 9-1/4" diameter. Halogen bulb.
  • Hagan Street Rods 4-3RDLED 4 Inch Flush-Fit Third Brake Light
    Hagan Street Rods 4-3RDLED 4 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 15 super bright red LED's
    • Lens is 1/2" by 4"
    • Comes with T bolts to hold housing in place
  • Halogen Tail Light Bulbs, 1156 Straight Mounting Pins
    Halogen Tail Light Bulbs, 1156 Straight Mounting Pins
    x
                Those other super bright, super high powered tail light bulbs may be easy to see, but they also generate enough heat to discolor your lens and burn the paint. 

    Halogen bulbs are brighter than standard bulbs, but use less energy, which means they burn cooler. 12 volt only.

    This bulb is shorter than a 1156 bulb and measures only 1-3/4" from bottom to end of the tip. From the pin to tip is 1-1/2".


     


  • Hagan Street Rods fm4SSA-LEDH Flush Mount Tail Lights Amber Slot 4x.5
    Hagan Street Rods fm4SSA-LEDH Flush Mount Tail Lights Amber Slot 4x.5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 4" x 0.5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • 1156 LED Tail Light Bulb, 1 Inch, Red
    1156 LED Tail Light Bulb, 1 Inch, Red
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1156 bulbs have the pins straight across and a single contact on the plug. The bulbs appear to be clear, but are red when illuminated.

    LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.) LED lights require so little “juice” that the conventional flasher can’t cope.

    These LED bulbs are made to serve as a conversion replacement for old damaged or missing original bulbs.  They essentially work the same but with greater quality and brighter, clearer light. They can be used as a running light, a brake light, or both.

    • 12 Volt Bulb
    • 1156 bulbs have the pins straight across and a single contact on the plug
    • Red when illuminated
    • 1" Diameter
    • Efficient and use such small amounts of power
    • Requires the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong)
  • Replacement 7 Inch Fluted Headlights
    Replacement 7 Inch Fluted Headlights
    x
                

    Here's a slick 7" replacement tri-bar style headlight bulb that will outperform your old sealed beam headlights. In the past, tri-bar headlights looked good but performed terribly. These upgraded headlights feature high powered quartz halogen H4 bulbs and a newly designed curved lens and fluted reflector for improved lighting and better visibility. Chrome plated, molded plastic housing with a glass lens.

    The perfect addition to a retro-rod or a sleek new street machine. Will directly replace 6014 sealed beam headlamps.

    Wiring Chart (GIF)

  • EMPI 9414 Cal-Look Amber Turn Signals, 2-1/2 Inch Diameter, Pair
    EMPI 9414 Cal-Look Amber Turn Signals, 2-1/2 Inch Diameter, Pair
    x
                

    Complete with housing, these turn signal assemblies feature single filament 12-Volt bulbs, seals and wire for proper installation.  The simple design allows these signals to be universally mounted as well. 

    • Single filament 12-Volt bulbs
    • Amber lens color
    • 2-1/2" diameter
    • Includes housing, seal, wiring
    • Sold as a pair
  • Super Bright Power Bulbs, Offset
    Super Bright Power Bulbs, Offset
    x
                12 volt stock replacement for use with old styled glass lenses. Super Power (50 candlepower), for more visibility. Use on side and taillights. With offset mounting pins.

    This bulb has two filaments and two contact points. It will not work properly in an 1156 socket.

    Never touch these bulbs with bare fingers! Smudges and skin oil will cause quick bulb failure. Wipe them with a cloth containing rubbing alcohol before use!

  • Hagan Street Rods fm8 3rdLED 8 Inch Flush-Fit Third Brake Light
    Hagan Street Rods fm8 3rdLED 8 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 30 super bright red LED's
    • Lens is 1/2" by 8"
    • Comes with T bolts to hold housing in place
  • 1934 Ford Commercial Headlilghts, 12V Halogen, W/ Turn Signal
    1934 Ford Commercial Headlilghts, 12V Halogen, W/ Turn Signal
    x
                These turn signal conversion commercial headlights are the perfect upgrade for your 1933-34 Ford.  They feature 12 volt halogen bulbs with turn signal bulbs included inside the headlamp.  These headlights are a standard 1934 Ford size at 9-1/2" diameter.
    • 12 Volt halogen bulbs
    • Turn signal bulbs hidden inside
    • Original style lens with mounting studs
    • Primered housing bucket with stainless steel rim
    • 9-1/2" diameter
    • Sold as a pair
  • Speedway 7 Inch Tri-Bar Headlights w/ Clear Turn Signal Lens
    Speedway 7 Inch Tri-Bar Headlights w/ Clear Turn Signal Lens
    x
                

    Speedway's traditional Tri-Bar H4 Halogen headlights allow you to have "the look" with out breaking the bank. Features a chrome plated, high impact plastic housing with a thick glass lens.

    The separate 94-style single filament bulb can be used as a turn signal or park light (not both). This filament appears clear but it glows amber when in use. 

    • 6-5/8" Headlight O.D.
    • High and Low beams
    • 12 volt H4 bulb included
    • Running light pigtail included
    • Headlight pigtail NOT included
    • Uses common 3-prong connector

    Headlight Wiring Chart (GIF)

    Installation Instructions (PDF)  


  • Ford 1941 Car, 1948-1956 Pickup Truck Tail Light Lens, Red Glass
    Ford 1941 Car, 1948-1956 Pickup Truck Tail Light Lens, Red Glass
    x
                

    Replace those old, cracked, or missing tail lights with these red glass lens.  They are reproductions for your 1941 Ford passenger car and 1948-1956 Ford pickup truck. 

    • Original replacements
    • 1941 Ford passenger car and 1948-1956 Ford pickup
    • Red glass lens
    • Sold each

     

  • Hagan Street Rods fm8OVR-LEDH Flush Mount Tail Lights Red Oval 8 x 1
    Hagan Street Rods fm8OVR-LEDH Flush Mount Tail Lights Red Oval 8 x 1
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 8" x 1" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fmTD6R-LEDH Flush Mount Tail Lights Teardrop 6 x .75
    Hagan Street Rods fmTD6R-LEDH Flush Mount Tail Lights Teardrop 6 x .75
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 6" x .75" x 0.25" thick
    • Steel face plate is 18 gauge mild steel
    • Boxes are 1-5/8" deep x 2" wide x 9" long

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • 1933-1936 Ford Stainless Tail Lights
    1933-1936 Ford Stainless Tail Lights
    x
                

    These are an exact duplicate of the original 1933-1936 Ford car glass lens tail lights. Also fits later model pick-ups and wagons. Left light has a lens to illuminate the license plate.

    • Highly polished stainless steel housing & rim
    • Cloth braided wire loom
    • Stainless steel screws
    • 12 volt bulb
    • Red glass lens
    • Choose right or left
  • Delta 01-1179-50X Classic 7 In. Headlights w/Xenon Bulb, Replace H6024
    Delta 01-1179-50X Classic 7 In. Headlights w/Xenon Bulb, Replace H6024
    x
                

    Delta developed Classic headlight replacements for the stock headlights. This headlight is powered by the Xenon Gas filled replaceable bulbs H4 60/55 Watt which will outperform stock headlight 4 to 1. The Headlights feature European prismatic lead-crystal lens, vacuum metalized steel reflector, Xenon bulbs, rubber boot protecting the optics from moisture and elements. 7" classic with xenon - replaces H6024.

    • Bulb color: Clear
    • Wattage: 55/60w
    • Light Source: Xenon
    • Mount Type: Headlight Ring
    • Finish: Black
    • Housing Material: Metal
    • Set includes:
      • (2) headlights
      • (2) H4 Xenon bulbs 60/55 Watt
      • (2) rubber boots
      • Hi/Lo Beam

     

  • Hagan Flush Mount LED Tail Lights Red Oval 4.5 x 1.5
    Hagan Flush Mount LED Tail Lights Red Oval 4.5 x 1.5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 4.5" x 1.5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm10SSR-LEDH Flush Mount Tail Lights Red Slot 10x.5
    Hagan Street Rods fm10SSR-LEDH Flush Mount Tail Lights Red Slot 10x.5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 10" x .5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • 1937 Ford Blue Dot Tail Light Lens, Passenger Car
    1937 Ford Blue Dot Tail Light Lens, Passenger Car
    x
                

    These replacement red glass tail light lens are for 1937 Ford cars.  They are for the passenger side and feature the classic Lynx-Eye blue dot in the center.  Gives a bright lavender appearance when brake light comes on.

    • Original replacement
    • Red glass lens
    • Classic Lynx-Eye blue dot in center
    • 1937 Ford cars only
    • 3" diameter
    • Sold each

    Note: The 1937 blue dot tail light lens is held into the housing by a metal ring around the outside of tail light housing, which captures the lens lip and housing lip together.

Goto Previous PagePrevious Page
1 2 3 4 5