Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck Cooling At Speedway Motors

Speedway Motors has the cooling system components classic truck engines require. We stock aluminum radiators and caps to fit many models. Depend on our quality Small Block Chevy and Ford Flathead water pumps, electric fans and expansion tanks to keep your classic pickup cool. View our great selection of flex fans, shrouds, radiator caps and water pump pulleys online. Get the best quality classic truck parts at the lowest possible prices from Speedway Motors!

"Classic Truck, Hoses and Pipes" Page 1 of 3

  • Straight Aluminum Hose Connectors, 6 Inch
    Straight Aluminum Hose Connectors, 6 Inch
    x
                

    These 6" long aluminum radiator/coolant hose connectors have a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

    Choose hose diameter (O.D.) needed.

  • Universal Transmission Cooler Installation Kit
    Universal Transmission Cooler Installation Kit
    x
                

    This automatic transmission cooler installation kit includes 5/16" hose and fittings.

  • 3/8 Inch Hose for Trans Coolers
    3/8 Inch Hose for Trans Coolers
    x
                This 3/8" I.D. hose is specifically designed for use as an automatic transmission fluid line. Sold per foot.
            
  • 1949-1953 Flathead Ford V8 Radiator Hose Dress-Up Kits
    1949-1953 Flathead Ford V8 Radiator Hose Dress-Up Kits
    x
                

    Dress up the flathead in your postwar Ford or Mercury by replacing the original cylinder head-to-radiator hoses with these stainless or chrome-plated pieces. Each radiator hose dress kit replaces both upper hoses on a flathead Ford V8 and includes two chrome or stainless tubes, four rubber connector hoses, and eight stainless steel hose clamps.

    • Simple way to add some sparkle to your engine compartment
    • Available with polished stainless steel or quality chrome-plated tubes
    • Strong three-ply rubber hose connectors
    • Attractive stainless steel hose clamps
  • Orange Thermal Sleeve
    From: $7.99
    Orange Thermal Sleeve
    x
                

    Looking for a durable way to protect your hoses or wires from excessive heat? If so, this thermal sleeve is sure bet. It features a soft knitted fiberglass interior that won't chafe which is coated with a thick layer of silicone. When combined, the materials will withstand 500°F of continuous heat, or 2000°F for a short duration. The sleeving is even designed to shed sparks while resisting hydraulic fluids and lubricating oil. Exposure to open flames will char the silicone coating but won't scorch the fiberglass inner layer.

    Great for electrical wires, cables and fluid lines. Available in 3/4", 1" & 2" I.D. sizes and each is sold by the foot.

  • Aeroquip FBU0600 Starlite Hose, -6 AN
    Aeroquip FBU0600 Starlite Hose, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Starlite hose can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Flexible Radiator Hose Kit, 24 Inch
    From: $69.99
    Product Rating: 4.00 Stars
    Flexible Radiator Hose Kit, 24 Inch
    x
                

    Flexible stainless steel radiator hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.

    Kit includes:

    • One 1-3/4" diameter hose
    • Two aluminum end cap covers
    • Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
    • Two 1-1/4" I.D. rubber reducers
    • Two 1-1/2" I.D. rubber reducers
    • Four hose clamps
  • Aluminum 90 Degree Hose Connectors
    $16.99
    $20.00
    Product Rating: 5.00 Stars
    Aluminum 90 Degree Hose Connectors
    x
                

    These 90° bend aluminum tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

    Choose hose diameter needed.

  • Aeroquip FBU1600 Starlite Hose, -16 AN
    Aeroquip FBU1600 Starlite Hose, -16 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • 90 Degree Silicone Radiator Hoses
    90 Degree Silicone Radiator Hoses
    x
                

    These 6" long silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated).

    Measures 12" along outermost edge. Choose hose diameter (I.D.) needed.

     

  • 45 Degree Silicone Radiator Hoses
    45 Degree Silicone Radiator Hoses
    x
                

    These 45° bend silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated).

    Choose hose diameter (I.D.) needed.

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 9/16 Inch ID, -10 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 9/16 Inch ID, -10 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race fuel line applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • DEi 010418 Heat Sheath Sewn Aluminized Line Sleeving, 1/2 x 36 Inch
    DEi 010418 Heat Sheath Sewn Aluminized Line Sleeving, 1/2 x 36 Inch
    x
                

    Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F.

    • Pliable for tight bends
    • Capable of withstanding 500°F direct / 2000°F radiant heat
    • Five popular diameters to choose from
    • Trim to desired length

    Heat Sheath Frequently Asked Questions (PDF)

  • Aeroquip FBU1200 Starlite Hose, -12 AN
    Aeroquip FBU1200 Starlite Hose, -12 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Aeroquip FBU0400 Starlite Hose, -4 AN
    Aeroquip FBU0400 Starlite Hose, -4 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Billet Aluminum Radiator Neck
    Billet Aluminum Radiator Neck
    x
                Billet Aluminum Radiator Neck. This is a standard size neck. 
  • Aluminum 105 Degree Hose Connectors
    $16.99
    $20.00
    Product Rating: 5.00 Stars
    Aluminum 105 Degree Hose Connectors
    x
                

    These 105° bend aluminum tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

  • Aluminum 135 Degree Radiator Hose Connectors
    Aluminum 135 Degree Radiator Hose Connectors
    x
                

    These 135° bend aluminum tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

  • Stepped Silicone Radiator Hose 1.25 - 1.50 Inch
    Stepped Silicone Radiator Hose 1.25 - 1.50 Inch
    x
                

    These 8" long stepped silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated).

    Connects 1-1/4" I.D. to 1-1/2" I.D. tubing. 

     

  • DEi 010403 Heat Sheath Sewn Aluminized Line Sleeving, 3/4 Inch Diameter x 3 Ft.
    DEi 010403 Heat Sheath Sewn Aluminized Line Sleeving, 3/4 Inch Diameter x 3 Ft.
    x
                

    Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F.

    • Pliable for tight bends
    • Capable of withstanding 500°F direct / 2000°F radiant heat
    • Five popular diameters to choose from
    • Trim to desired length

    Heat Sheath Frequently Asked Questions (PDF)

  • Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
    Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    • -10 AN - 9/16"
    • Up to 45% lighter than stainless steel braided hose
    • Working temperature is -45 Degree F to +300 Degree F
    • Can be used with either crimp style or reusable hose fittings

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Speedway Straight Silicone Radiator Hose, 6 Inch Long
    Speedway Straight Silicone Radiator Hose, 6 Inch Long
    x
                

    These 6" long silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated).

    Choose hose diameter (I.D.) needed.

     

  • Speedway Straight Silicone Radiator Hose, 12 Inch Long
    Speedway Straight Silicone Radiator Hose, 12 Inch Long
    x
                

    These 12" long silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated).

    Choose hose diameter (I.D.) needed.

     

  • Gates 26501 Vulco-Flex Green Stripe Radiator Hose, 1-3/4 x 13-1/2 Inch
    Gates 26501 Vulco-Flex Green Stripe Radiator Hose, 1-3/4 x 13-1/2 Inch
    x
                

    Gates Vulco-Flex "Green Stripe" heavy duty radiator hoses include an internal spiral wire bonded to the I.D. of the hose, which prevents collapsing and kinking while positively retaining the spring.

    • Designed to replace straight or curved coolant hoses
    • Excellent flexibility, yet collapse and kink resistant
    • Heat resistant construction throughout
    • Approved for marine applications
  • Gates 25478 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 17 Inch
    Gates 25478 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 17 Inch
    x
                

    Gates Vulco-Flex II radiator hoses include an interanl spiral wire which prevents collapsing and kinking. The spiral wire is retained within a groove on the inside of the hose.

    • Will bend in almost any direction
    • Replicates the angles of original equipment coolant hose
    • Improved sealing surface for greater leak resistance and increased flexibility
  • Thermo-Sleeve for Hoses and Wires, 1/2 Inch x 3 Feet
    Thermo-Sleeve for Hoses and Wires, 1/2 Inch x 3 Feet
    x
                Using Thermo-Sleeve will provide your wires and  hoses with protection from both radiant and conductive heat. The  aluminized sleeving reflects over 90 percent of heat, while the inner  material is fireproof and resistant to oil. Combined, the  high-temperature fabric and reflective foil skin provide the protection  you need in today's high-performance applications. 
    • 36" length
    • Fits 1/2" - 1" diameter
    • 2,000º F max temp
    • Wrap-around installation
    • Easy hook and loop closure
    • Fireproof & oil resistant
    • Tough silver Mylar foil can be effective with radiant heat up to 2,000º F and 400º F for conductive heat
  • Billet Specialties 68320 Alum Hose Separator Clamp, .625 x .625 Inch
    Billet Specialties 68320 Alum Hose Separator Clamp, .625 x .625 Inch
    x
                Please view the product's page for more information
            
  • Billet Specialties 68325 Alum Hose Separator Clamp, .625 x .781 Inch
    Billet Specialties 68325 Alum Hose Separator Clamp, .625 x .781 Inch
    x
                Please view the product's page for more information
            
  • Flexible Radiator Hose Kit, 12 Inch
    From: $59.99
    Product Rating: 5.00 Stars
    Flexible Radiator Hose Kit, 12 Inch
    x
                

    Flexible stainless steel hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.

    Kits includes:

    • One 1-3/4" diameter hose
    • Two aluminum end cap covers
    • Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
    • Two 1-1/4" I.D. rubber reducers
    • Two 1-1/2" I.D. rubber reducers
    • Four hose clamps
  • Steel 105 Degree Hose Connectors
    Steel 105 Degree Hose Connectors
    x
                

    These 105° bend steel tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

  • Gotta Show 231104 Ford Transmission Cooler Line Kit
    Gotta Show 231104 Ford Transmission Cooler Line Kit
    x
                

    These kits make it easy to plumb your transmission to your radiator or external transmission cooler. Hose uses aircraft quality TEFLON® inner liner for high temperature and abrasion resistance.

    • 11 ft. braided stainless steel hose with AN 6 female ends
    • Two metal lines to connect to your transmission
    • Two AN 6 female fittings
    • The steel lines have AN6 and 1/4' NPT fittings

    Note: You will need to buy the right adapter fittings to your radiator or transmission cooler.

    Instructions (PDF)

  • Billet Specialties 68820 Alum Hose Separator Clamp, 1.015 x 1.015 Inch
    Billet Specialties 68820 Alum Hose Separator Clamp, 1.015 x 1.015 Inch
    x
                Please view the product's page for more information
            
  • Thermo-Sleeve for Hoses and Wires, 1 Inch x 3 Feet
    Thermo-Sleeve for Hoses and Wires, 1 Inch x 3 Feet
    x
                Using Thermo-Sleeve will provide your wires and  hoses with protection from both radiant and conductive heat. The  aluminized sleeving reflects over 90 percent of heat, while the inner  material is fireproof and resistant to oil. Combined, the  high-temperature fabric and reflective foil skin provide the protection  you need in today's high-performance applications. 
    • 36" length
    • Fits 5/8" - 1" diameter
    • 2,000º F max temp
    • Slip-on installation
    • Fireproof & oil resistant
    • Tough silver Mylar finish
  • Billet Specialties 68220 Alum Hose Separator Clamp, .562 x .562 Inch
    Billet Specialties 68220 Alum Hose Separator Clamp, .562 x .562 Inch
    x
                Please view the product's page for more information
            
  • Billet Specialties 68125 Alum Hose Separator Clamp, .540 x .630 Inch
    Billet Specialties 68125 Alum Hose Separator Clamp, .540 x .630 Inch
    x
                Please view the product's page for more information
            
  • AFCO Silicone Radiator Hoses, 45 Degree, 12 Inch Length
    AFCO Silicone Radiator Hoses, 45 Degree, 12 Inch Length
    x
                
    • High-temp fiberglass reinforced silicone hose
    • Allows you to customize your cooling system
    • Choose 1-1/4”, 1-1/2” or 1-3/4” O.D.
  • Aeroquip FBU0800 Starlite Hose, -8 AN
    Aeroquip FBU0800 Starlite Hose, -8 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Thermo Tec 17300 Thermo-Flex Insulation, 3 Inch I.D. x 3 Ft.
    Thermo Tec 17300 Thermo-Flex Insulation, 3 Inch I.D. x 3 Ft.
    x
                

    Thermo-Flex heat shield is a composite material with unlimited uses. The material is manufactured to provide abrasion resistance, thermal insulation and physical containment of hoses and wiring. The combination of aluminum and silica produces a sleeving that is flexible, lightweight and strong. Thermo-Flex can be slit for applications such as wire looms or hosecovering without disconnecting the ends of the wire or hose.

    Thermo-Flex will withstand temperatures in excess of 750º F in radiant heat.

  • AFCO Chevy Aluminum Thermostat Housing, 45 Degree Neck
    AFCO Chevy Aluminum Thermostat Housing, 45 Degree Neck
    x
                

    These thermostat housings are die-cast, polished aluminum. The O-ring sealed water neck rises at a 45° angle and can be rotated 360° for best possible radiator hose access. Includes hardware. 

    Fits all Chevy V8's 1955-86, and accepts normal GM thermostats and 1-1⁄2" I.D. hoses.

  • Gotta Show 231101 GM Transmission Cooler Line Kit
    Gotta Show 231101 GM Transmission Cooler Line Kit
    x
                

    These kits make it easy to plumb your transmission to your radiator or external transmission cooler. Hose uses aircraft quality Teflon® inner liner for high temperature and abrasion resistance.

    • 11 ft. braided stainless steel hose
    • Fittings are 1/2"-20 IFM
    • Two metal lines to connect to your transmission

    Note: You will need to buy the right adapter fittings to your radiator or transmission cooler.

    910-31101 Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3