Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck Heating & A/C At Speedway Motors

Speedway Motors has the heating and air conditioner parts you need to make your classic truck comfortable again. We offer great prices on new heater cores, control modules and air conditioning kits. Don't forget replacement air conditioning o-rings, pipes, and fittings to fix any problems your truck may have right here at Speedway Motors.

Featured Products
Air Conditioning Kit w/ Condenser
Air Conditioning Kit w/ Condenser
SKU-428200
x
            

The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pick-ups and smaller cars.

These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, Sanden 508 compressor  with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

Instructions (PDF) 

Speedway Universal Fit Street Rod Heater, 12 Volt, 20,000 BTU
Speedway Universal Fit Street Rod Heater, 12 Volt, 20,000 BTU
SKU-910454
x
            

These all new universal street rod heaters give you the option of heat in your custom ride with the ease of installation.  They feature a compact size, two-speed fan, and rear fan guard.

  • 9-1/2" x 6-1/2" x 7"
  • Adjustable louver to direct heat flow
  • 12V 20,000 BTU heater
  • Has rear exit hose connections for convenient mounting
Vintage Air 981412 Gen II Compac Universal Heat and Air Kit
Vintage Air 981412 Gen II Compac Universal Heat and Air Kit
SKU-7251000
x
            Trust your heating and cooling needs to Vintage Air!  These universal heater/air conditioning kits are perfect for upgrading the outdated system in your classic ride or just adding a comfort necessity that was once not an option for your automobile.  Regardless of the reason, these redesigned kits are sure to satisfy your needs, with all necessary components and detailed instructions included.  Made in the USA.

Includes:

  • Evaporator
  • Controller         
  • 2-Louvers   
  • SD 508 Compressor w/ double V groove pulley (No compressor bracket)
  • Hose Kit w/drier
  • Safety switch
  • Detailed instructions

Note:  The Gen II Compac Kit is sold without an A/C condenser. 

Vintage Air Gen II Universal Heat and Air Kit with Vertical Condenser
Vintage Air Gen II Universal Heat and Air Kit with Vertical Condenser
SKU-7252000
x
            Trust your heating and cooling needs to Vintage Air!  These universal  heater/air conditioning kits are perfect for upgrading the outdated  system in your classic ride or just adding a comfort necessity that was  once not an option for your automobile.  Regardless of the reason, these  redesigned kits are sure to satisfy your needs, with all necessary  components and detailed instructions included.  Made in the USA.

Includes:

  • Evaporator
  • Controller         
  • 2-Louvers   
  • SD 508 Compressor w/ double V groove pulley (No compressor bracket)
  • Vertical A/C condenser (for early styled cars)
  • Hose Kit w/drier
  • Safety switch
  • Detailed instructions

"Classic Truck, HVAC" Page 1 of 3

  • Aeroquip FCF0809 Stainless Steel Braided AC Hose, -8 AN, 9 Ft. Length
    Aeroquip FCF0809 Stainless Steel Braided AC Hose, -8 AN, 9 Ft. Length
    SKU-617809
    x
                This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
            
  • 90 Degree Crimp-On O-Ring Heater Hose Fitting, -10 AN
    90 Degree Crimp-On O-Ring Heater Hose Fitting, -10 AN
    SKU-4281327
    x
                

    These premium -10 size (7/8" x 14 TPI) crimp-on hose fittings feature O-ring seals and a 90 degree bend. Ideal for use with heater bulkhead plates.

    Note: Will need to be crimped by your local shop. 

  • Under Dash AC Unit
    $229.99
    $279.99
    Under Dash AC Unit
    SKU-91000535
    x
                

    Looking for a simple under-the-dash A/C cooling unit? This compact air conditioning control box is just 16" long 4.25" tall and 11" deep. This unit features two large 2" X 6" air vents in front with a three-speed blower motor and cooling control adjustment.

    Note:  This unit consists of the AC evaporator, duct assembly and blower motor for the under dash use.  It will require the additional items of the compressor, hose kit, dryer and condenser to complete the A/C system.

  • Heater Core for 1967-72 GM C/K Series Truck and Blazer
    Heater Core for 1967-72 GM C/K Series Truck and Blazer
    SKU-910399067
    x
                For your 1967-72 GM C/K Series Truck, use a 100% new heater core,    not a marginal   recore like others sell. All heater cores are a    direct fit  factory replacement for applications without A/C. 
    • All new construction
    • Direct fit factory replacement for 1967-72 GM C/K Series truck, Blazer, and Jimmy
    • Please note: non air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • Air Conditioning Kit w/ Condenser
    Air Conditioning Kit w/ Condenser
    SKU-428200
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pick-ups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, Sanden 508 compressor  with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    Instructions (PDF) 

  • Heater Core for 1966-72 Ford F-Series and Bronco
    Heater Core for 1966-72 Ford F-Series and Bronco
    SKU-910399024
    x
                For your 1966-72 Ford F-Series pickup, use a 100% new heater core,   not a marginal   recore like others sell. All heater cores are a   direct fit  factory replacement for applications without A/C. 
    • All new construction
    • Direct fit factory replacement for 1966-72 Ford F-Series and Bronco
    • Please note: non air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • Aeroquip FCF1003 Stainless Steel Braided AC Hose, -10 AN, 3 Ft. Length
    Aeroquip FCF1003 Stainless Steel Braided AC Hose, -10 AN, 3 Ft. Length
    SKU-617103
    x
                This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
            
  • Straight Nickel Plated AC Fitting w/Port, -6 AN to -6 AN
    Straight Nickel Plated AC Fitting w/Port, -6 AN to -6 AN
    SKU-6171912
    x
                These handsome nickel plated steel fittings are reuseable. This AN6 straight fitting features a high side R134a port.
            
  • Flex-A-Lite 650 Standard Plenum for Mojave Universal Heater
    Flex-A-Lite 650 Standard Plenum for Mojave Universal Heater
    SKU-359650
    x
                

    This plenum is made of black molded plastic and snaps onto the outlet 'grille' of the mojave heater. It has a nipple to attach one, 2.5" flex hose (like dryer vent hose - not included) to the side of the plenum.

    The plenum also has two round vents that can be rotated and which have two vanes that can be positioned to direct the airflow almost any direction or even closed to force air into the defrost hose.

    • 4-3/4" tall
    • 8-1/2" wide
    • 4-1/2" deep

    When installed on the heater, the overall dimensions of the assembly (heater with plenum) are:

    • 5" tall
    • 10" wide
    • 13" deep

    When the plenum is snapped onto the heater, the total depth (front to back) is approximately 13".

     

  • Air Conditioning Condenser, 12 x 19-1/2 Inch
    Air Conditioning Condenser, 12 x 19-1/2 Inch
    SKU-42815215
    x
                

    Horizontal mount aluminum A/C condenser with parallel flow. This is 12" wide by 19-5/8" tall with fittings on passenger/right hand side. Top fitting is 90 degree pointed down and lower fitting is straight point out horizontal.

    Has one -6 AN and one -8 AN fitting.

  • 135 Degree Nickel Plated AC Fitting, O-Ring Pilot w/Port, -10 AN
    135 Degree Nickel Plated AC Fitting, O-Ring Pilot w/Port, -10 AN
    SKU-6171894
    x
                These handsome nickel plated steel fittings are reuseable. This 135 degree AN10 fitting features a low side R134a port.
            
  • Crimp-On A/C O-Ring Fitting, 90 Degree, -6 AN
    Crimp-On A/C O-Ring Fitting, 90 Degree, -6 AN
    SKU-4282321
    x
                90° elbow A/C O-ring crimp fitting with in a -6 (5/8" x 18 TPI) size.
            
  • Aeroquip FCF1009 Stainless Steel Braided AC Hose, -10 AN, 9 Ft. Length
    Aeroquip FCF1009 Stainless Steel Braided AC Hose, -10 AN, 9 Ft. Length
    SKU-617109
    x
                This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
            
  • 90 Degree Nickel Plated AC Fitting, O-Ring Pilot w/ Port, -10 AN
    90 Degree Nickel Plated AC Fitting, O-Ring Pilot w/ Port, -10 AN
    SKU-6171834
    x
                These handsome nickel plated steel fittings are reuseable. This 90 degree AN10 fitting features a low side R134a port.
            
  • Air Conditioning Kit w/o Condenser
    Air Conditioning Kit w/o Condenser
    SKU-428100
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pickups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, compressor with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    428-100 Instructions (PDF)

  • 90 Degree Nickel Plated AC Fitting, -6 AN
    90 Degree Nickel Plated AC Fitting, -6 AN
    SKU-6171732
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • Heater Hose Kits
    From: $99.99
    Product Rating: 5.00 Stars
    Heater Hose Kits
    SKU-91073044
    x
                

    Kit includes two 44" lengths of hose and four ends. Available in polished stainless steel or chrome steel.

    • 3/4" hose O.D.
    • 5/8" hose I.D.
  • Brass Replacement Sleeves - AN8 AC - Set of 6
    Brass Replacement Sleeves - AN8 AC - Set of 6
    SKU-6172431
    x
                Replacement brass sleeves in an assortment of AN sizes for your air conditioning system. 
            
  • Straight Nickel Plated AC Fitting, O-Ring Pilot w/Port, -10 AN
    Straight Nickel Plated AC Fitting, O-Ring Pilot w/Port, -10 AN
    SKU-6171814
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • Flex-A-Lite 640 Mojave Universal Heater
    Flex-A-Lite 640 Mojave Universal Heater
    SKU-359640
    x
                

    This 12,000 BTU universal heater is fully self contained, but compact in size. The 3 speed fan blows air through a heater core that is plumbed just like any newer car. Works well in most under-dash applications. Includes universal switch, fuse and wiring.

    Also available is a universal plenum which also has provisions for defroster hookups.

    359-640 Instructions (PDF)

  • Vintage Air 981412 Gen II Compac Universal Heat and Air Kit
    Vintage Air 981412 Gen II Compac Universal Heat and Air Kit
    SKU-7251000
    x
                Trust your heating and cooling needs to Vintage Air!  These universal heater/air conditioning kits are perfect for upgrading the outdated system in your classic ride or just adding a comfort necessity that was once not an option for your automobile.  Regardless of the reason, these redesigned kits are sure to satisfy your needs, with all necessary components and detailed instructions included.  Made in the USA.

    Includes:

    • Evaporator
    • Controller         
    • 2-Louvers   
    • SD 508 Compressor w/ double V groove pulley (No compressor bracket)
    • Hose Kit w/drier
    • Safety switch
    • Detailed instructions

    Note:  The Gen II Compac Kit is sold without an A/C condenser. 

  • Heater Core for 1964-66 GM C/K Series Truck with Factory Air
    Heater Core for 1964-66 GM C/K Series Truck with Factory Air
    SKU-910398224
    x
                For your 1964-66 GM C/K Series truck, use a 100% new heater core,   not a marginal   recore like others sell. All heater cores are a   direct fit  factory replacement for applications with A/C. 
    • All new construction
    • Direct fit factory replacement for 1964-66 GM C/K Series truck with factory air
    • Please note: factory air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • A/C Hose Kit
    $89.99
    Product Rating: 5.00 Stars
    A/C Hose Kit
    SKU-42810100
    x
                

    These air conditioning hose kits include enough hose and fittings to allow a normal installation in applications without bulkhead fittings. 

    • (2) Band Clamps
    • (4) AN6 Straight
    • (1) AN8 Straight
    • (1) AN10 Straight
    • (2) AN6 90 Degree
    • (1) AN8 90 Degree
    • (1) AN10 90 Degree
    • (1) AN8 90 Degree with Service Port
    • (1) AN10 90 Degree with Service Port
    • (4) #6 O-Rings
    • (2) #8 O-Rings
    • (2) #10 O-Rings
    • (2) Grommets
    • 6 ft #6 Hose
    • 5 ft #8 Hose
    • 4 ft #10 Hose

     

    Fittings will need to be crimped at your local shop.

  • Vintage Air 03260 SuperFlow Horizontal Condenser
    Vintage Air 03260 SuperFlow Horizontal Condenser
    SKU-7253260
    x
                

    The cool people at Vintage Air technology have done it again! Defining their commitment to creating superior products, Vintage Air offers these SuperFlow condensers. These condensers have a unique micro tube design with improved refrigerant flow to provide much more capacity than any other comparable tube and fin condenser. By providing increased refrigerant contact with the micro tube walls and multiple passes per circuit, SuperFlow condensers furnish more sufficient flow for a more efficient system and much cooler air. Vintage Air SuperFlow condensers are available in horizontal models, which are perfect for late model cars. They offer more grille area and most include universal mount bracket kits. Oh, and by the way, increased condenser capacity means that more heat is dissipated, pressure drops, and your compressor turns more easily. "So what," you say? Well, if your engine isn't working as hard, you gain a boost of horsepower! Cool, huh? Vintage Air--the people who know all about living cool.

    • Micro tube design with improved refrigerant flow
    • More sufficient flow for a more efficient system and much cooler air
    • Horizontal model - perfect for late model cars
    • Includes mounting brackets
    • 14" tall x 18" wide x .83" thick
    • Male o-ring fittings, #8 top and #6 bottom fitting
  • LS EVAP Delete Plug
    $12.99
    $18.99
    New
    LS EVAP Delete Plug
    SKU-91680916
    x
                

    These EGR EVAP delete plugs are intended for use on non-pollution controlled, off-road vehicles only.

    • For GM LS engines
    • Hardware and O-ring are included

     

  • Vintage Air 03332 SuperFlow Vertical Condenser
    Vintage Air 03332 SuperFlow Vertical Condenser
    SKU-7253332
    x
                

    The cool people at Vintage Air technology have done it again! Defining their commitment to creating superior products, Vintage Air offers these SuperFlow condensers. These condensers have a unique micro tube design with improved refrigerant flow to provide much more capacity than any other comparable tube and fin condenser. By providing increased refrigerant contact with the micro tube walls and multiple passes per circuit, SuperFlow condensers furnish more sufficient flow for a more efficient system and much cooler air. Vintage Air SuperFlow condensers are available in vertical models for those tight spots in your classic street rod, and most include universal mount bracket kits. Oh, and by the way, increased condenser capacity means that more heat is dissipated, pressure drops, and your compressor turns more easily. "So what," you say? Well, if your engine isn't working as hard, you gain a boost of horsepower! Cool, huh? Vintage Air--the people who know all about living cool.

    • Micro tube design with improved refrigerant flow
    • More sufficient flow for a more efficient system and much cooler air
    • Vertical model - for those tight spots in your classic street rod
    • Includes mounting brackets
    • Designed for street Rods (1932-'40 and most pre-'48 cars)
    • 20.75" tall x 14" wide x .75" thick
    • #8 fitting at top / #6 fitting at bottom
  • Heater Core for 1967-72 GM C/K Series Truck and Blazer w/ Factory Air
    Heater Core for 1967-72 GM C/K Series Truck and Blazer w/ Factory Air
    SKU-910399090
    x
                For your 1967-72 GM C/K Series truck, use a 100% new heater core,    not a marginal   recore like others sell. All heater cores are a    direct fit  factory replacement for applications with A/C. 
    • All new construction
    • Direct fit factory replacement for 1967-72 GM C/K Series truck and blazer
    • Please note; factory air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • Tuff Stuff 4515NBDP Polished V-Belt AC Compressor
    Tuff Stuff 4515NBDP Polished V-Belt AC Compressor
    SKU-42823459
    x
                The Sanden type 508 compressor provides ample capacity for even large interiors and will enhance the appearance of your engine compartment. Has a -10 AN O-ring suction (low side) and a -8 AN O-ring pressure (high side).
            
  • 90 Degree Nickel Plated AC Fitting, O-Ring Pilot w/ Port, -6 AN
    90 Degree Nickel Plated AC Fitting, O-Ring Pilot w/ Port, -6 AN
    SKU-6171832
    x
                These handsome nickel plated steel fittings are reuseable. Features an AN6 90 degree fitting with port with a high side R134a port.
            
  • Straight Nickel Plated AC Fitting, O-Ring Pilot, -6 AN
    Straight Nickel Plated AC Fitting, O-Ring Pilot, -6 AN
    SKU-6171712
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • Slimeline Plenum for Mojave Heater
    Slimeline Plenum for Mojave Heater
    SKU-359655
    x
                

    This plenum is made of black molded plastic and snaps onto the outlet 'grille' of the mojave heater.

    The plenum also has two round vents that can be rotated and which have two vanes that can be positioned to direct the airflow almost any direction.

  • Speedway Universal Fit Street Rod Heater, 12 Volt, 20,000 BTU
    Speedway Universal Fit Street Rod Heater, 12 Volt, 20,000 BTU
    SKU-910454
    x
                

    These all new universal street rod heaters give you the option of heat in your custom ride with the ease of installation.  They feature a compact size, two-speed fan, and rear fan guard.

    • 9-1/2" x 6-1/2" x 7"
    • Adjustable louver to direct heat flow
    • 12V 20,000 BTU heater
    • Has rear exit hose connections for convenient mounting
Goto Previous PagePrevious Page
1 2 3