Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 9

Products

Gaskets and Seals

Shop Classic Truck Engines At Speedway Motors

Speedway Motors has high performance classic truck engine parts at everyday low prices. Whether you are building a Small Block Chevy or Ford Flathead, Speedway has you covered with thousands of parts in stock, ready to ship. With everything from pison sets to camshafts, Speedway can feed your need for speed! Complete classic pickup truck crate engines of multiple sizes, like Chevy 305, 350, 383 and others, are available at great prices! We also have a large selection of cylinder heads, crankshafts and roller rocker arms, so make Speedway your classic truck performance engine solution.

Featured Products
  • Sill Weather Strip Rubber
    $24.99
    Sill Weather Strip Rubber
    (Part #91001927)
    x
                Black rubber sill weather strips. One side is 7/8 inches tall and the mounting side is 5/8 inches tall. Measures 48 inches long. Can be mounted easy to any window felt channel laying agents, the glass preventing water leaking inside the door or quarter panel. 
            
  • Fel-Pro 1142-026 PermaTorque Multi-Layer Steel Head Gasket, Small Block Chevy
    New
    Fel-Pro 1142-026 PermaTorque Multi-Layer Steel Head Gasket, Small Block Chevy
    (Part #3441142026)
    x
                

    Fel-Pro Performance head gaskets are proven to handle big power and are designed to maintain contact pressure between the cylinder head and block during engine operation.  Manufactured to work great with both cast iron and aluminum heads, pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS. Engines with open deck surfaces, numerous cooling passages, and relatively few head fasteners will greatly benefit from Fel-Pro performance PermaTorque MLS head gaskets.

    • Works for 265-350 Small Block Chevy
    • Gaskets are sold each
    • Multi-layer
    • 4.100" gasket bore
    • Nominal compression thickness: .026"
    • Compressed volume: 5.7 cc
    • Not for use with small block 400.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • 1949-1953 Flathead Ford V8 Water Pump Gaskets
    1949-1953 Flathead Ford V8 Water Pump Gaskets
    (Part #91015537)
    x
                

    Whether you're installing original Flathead water pumps or Speedway's all-new redesigned pumps, you'll need fresh gaskets to seal them to the block. These gaskets are for 1949-1953 Ford Flathead V8 water pumps. Sold as a pair.

  • Walker 346 Radiator Transmission Cooler Steel Line Straight Fittings
    Walker 346 Radiator Transmission Cooler Steel Line Straight Fittings
    (Part #820346)
    x
                1/8" NPT and screw into most standard radiator transmission coolers. Straight for 5/16" steel line. 
            
  • Speedway Small Block Chevy Overhaul Gasket Set, 350 Chevy, '67-'85
    Speedway Small Block Chevy Overhaul Gasket Set, 350 Chevy, '67-'85
    (Part #9152350)
    x
                Speedway standard rebuild gasket sets feature composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
            
  • Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    (Part #3441003)
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Pre-flattened steel wire
    • Nominal compression thickness: .041"
    • Compressed volume: 9.1 cc
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Ford C-4 Automatic Transmission Oil Pan Gasket
    Ford C-4 Automatic Transmission Oil Pan Gasket
    (Part #91010229)
    x
                This oil pan gasket is made to work with your Ford C-4 automatic transmission. It is .07" thick and made of rubber impregnated cork. 
    • .07" thick rubber impregnated cork gasket
    • Sold individually
    • Ford C-4 transmission
  • Best Gasket 536C-P 1949-53 Flathead Big Bore Head Gaskets, Copper
    Best Gasket 536C-P 1949-53 Flathead Big Bore Head Gaskets, Copper
    (Part #91015895)
    x
                

    1949-1953 flathead Ford V8 head gaskets for use with all bores from 3-1/16" to 3-3/8". This is a sandwich-style copper gasket. It measures approx .080" uncompressed and .062" compressed.

    910-15895 Instructions (PDF)

Filter

"Classic Truck, Gaskets and Seals" Page 1 of 9

Page 1 of 9

  • Perma-Cool 195 Universal Spin-on Bypass Port Oil Filter Adapter
    Perma-Cool 195 Universal Spin-on Bypass Port Oil Filter Adapter
    (Part #573195)
    x
                

    These universal oil filter adapters come with 6 different thread size adapters to make installation easy on a variety of applications. They are designed to be mounted between the engine block and oil filter to route oil to a remote oil cooler.

    • 3/8 NPT ports
    • Special thread adapters cover 90% of engines
    • Die cast aluminum
    • Add an oil cooler and remote filter

    Oil Filter Adapter 195 Installation Instructions (PDF)

     

  • J-B Weld 8276 Kwik Epoxy Putty
    J-B Weld 8276 Kwik Epoxy Putty
    (Part #91080180)
    x
                

    J-B Weld is the world's finest cold-weld compound. It's a remarkably easy, convenient, and inexpensive alternative to welding, soldering, and brazing. The Kwik Weld formula, which when mixed in equal parts, sets in 4 minutes. JB Weld bonds to virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper - just about any porous and non-porous material. When cured, you can drill it, tap it, and machine it.

    • Gasoline, petroleum, chemical, and acid resistant
    • Waterproof
    • Sets in 4 minutes, fully cures in 4 hours
    • Withstands temperatures up to 300° F
  • Fel-Pro Gaskets 2802 Small Block Chevy Performance Gasket Set
    Fel-Pro Gaskets 2802 Small Block Chevy Performance Gasket Set
    (Part #3442802)
    x
                

    Fel Pro Performance V8 gasket set for 1955-79 S/B Chevy with left hand dipstick. Fits 283, 302, 307, 327, and 350 with stock or small intake and exhaust ports (excluding most aluminum blocks).

    • #1003 Head Gaskets
      • pre-flattened steel wire ring
      • 4.166" gasket bore
      • 0.041" nominal compression thickness
      • 9.1 cc compressed volume
    • Intake Gaskets
      • 1.23" x 1.99"  port size
      • .060" thickness
    • Header Gaskets have 1.38" x 1.38" ports
  • Speedway 1957-85 Chevy 283-350 Complete Gasket Set
    Speedway 1957-85 Chevy 283-350 Complete Gasket Set
    (Part #91010255)
    x
                

    Speedway Chevy gaskets are for 2-piece rear main blocks. Oil pan gasket can be used with either RH or LH dipsticks and includes both thin and thick seals. Valve cover gaskets are 5/16" rubberized cork suitable for racing.

    • Suitable for engines up to 600 h.p. 
    • Intake Gasket: 1205 style, 1.28" x 2.09"
  • Fel-Pro 1244 S/B Chevy Intake Manifold Gaskets, 1.25x1.90 to 1.40x2.30
    Fel-Pro 1244 S/B Chevy Intake Manifold Gaskets, 1.25x1.90 to 1.40x2.30
    (Part #3441244)
    x
                Fel-Pro Blue Stripe premium quality intake manifold gaskets for Small Block Chevy (SBC).
            
  • Fel-Pro Gaskets KS2614 1970-1980 S/B Chevy 400 Overhaul Gasket Set
    Fel-Pro Gaskets KS2614 1970-1980 S/B Chevy 400 Overhaul Gasket Set
    (Part #344KS2614)
    x
                

    The Fel-Pro Overhaul Gasket Set includes the composite head gasket (Fel Pro # 8364PT), valve cover, water pump, intake, front seal and cover gasket, oil pan and rear main seal.

    Fits 1970-1980 Small Block Chevy 400 V8.

  • Best Gasket RS638G-1 1962-65 Chevy 409 HP Gasket Set
    Best Gasket RS638G-1 1962-65 Chevy 409 HP Gasket Set
    (Part #910RS638G1)
    x
                

    You won't get very far rebuilding that W-Series engine if you don't have a gasket set. These modern, 100% complete gasket sets are a great solution to old sealing problems. They feature a GraphTite cylinder head gasket which consists of Kevlar reinforced graphite facing material mechanically bonded to both sides of a perforated steel core. This modern engineered, high-performance material is rated to a temperature of 1400° F. Steel fire rings are installed in the combustion chamber areas of the gasket.

    GraphTite head gaskets have superb sealing characteristics, excellent torque retention, and hold up to the punishment dished out by high-performance engines – high quality all the way. This gasket might be overkill for cruiser engines, but so what...extra performance never hurts!

    Gasket Kit Contents (Link)

  • Best Gasket 20012E Oldsmobile V8 303-324-371 Valve Cover Gasket Set
    Best Gasket 20012E Oldsmobile V8 303-324-371 Valve Cover Gasket Set
    (Part #91020012)
    x
                Oldsmobile V8 303-324-371 Valve Cover Gasket Set for 1949-58 models.
            
  • Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    (Part #3441003)
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Pre-flattened steel wire
    • Nominal compression thickness: .041"
    • Compressed volume: 9.1 cc
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Speedway Small Block Chevy Overhaul Gasket Set, 400 Chevy '70-'81
    Speedway Small Block Chevy Overhaul Gasket Set, 400 Chevy '70-'81
    (Part #9152400)
    x
                

    Seedway standard rebuild gasket sets feature composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.

  • Speedway Small Block Chevy Overhaul Gasket Set, 350 Chevy, '67-'85
    Speedway Small Block Chevy Overhaul Gasket Set, 350 Chevy, '67-'85
    (Part #9152350)
    x
                Speedway standard rebuild gasket sets feature composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
            
  • Fel-Pro Gaskets 1818 1980-1985 Small Block Chevy Oil Pan Gasket Set
    Fel-Pro Gaskets 1818 1980-1985 Small Block Chevy Oil Pan Gasket Set
    (Part #3441818)
    x
                

    Premium quality Fel-Pro Blue Stripe oil pan gaskets for Small Block Chevy.

    Note: Thick front seal is 3/8"

  • Grommet for Push-In Oil Breather, 1-1/4 Inch O.D., 3/4 Inch I.D.
    Grommet for Push-In Oil Breather, 1-1/4 Inch O.D., 3/4 Inch I.D.
    (Part #5506377)
    x
                

    Our replacement 1-1/4" grommets are made of a black neoprene material for extended service life. Fits into a 1-1/4" valve cover hole.

  • Small Block Chevy Valve Cover Gaskets, 3/16 Inch Thick Six Hole
    Small Block Chevy Valve Cover Gaskets, 3/16 Inch Thick Six Hole
    (Part #91010215)
    x
                

    Composite valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC).

  • Fel-Pro Gaskets 1821 1957-1979 Small Block Chevy Oil Pan Gasket Set
    Fel-Pro Gaskets 1821 1957-1979 Small Block Chevy Oil Pan Gasket Set
    (Part #3441821)
    x
                

    Premium quality Fel-Pro Blue Stripe oil pan gaskets for Small Block Chevy.

    Note: Thick front seal is 3/8" and the thin front seal is 1/4".

  • Fel-Pro Gaskets FS7525B 1949-53 Flathead Ford V8 Overhaul Gasket Set
    Fel-Pro Gaskets FS7525B 1949-53 Flathead Ford V8 Overhaul Gasket Set
    (Part #344FS7525B)
    x
                

    If you're going to overhaul your Flathead, you're going to need new gaskets. This complete overhaul gasket set is for 1949-1953 Ford and Mercury flathead V8 engines. Includes all the necessary gaskets and seals you need for a typical engine rebuild.

    • High-quality gaskets for a leak-free engine
    • Modern composition head gaskets
    • Head gaskets will fit bores up to 3-3/16" (3.1875")
    • Set includes gaskets for:
      • Cylinder Heads
      • Oil Pan
      • Rear Seal
      • Water Pumps
      • Front Packing
      • Fuel Pump
      • Water Necks
      • Timing Cover
      • Valve Seals
      • Intake Manifold
      • Exhaust Manifolds
Goto Previous PagePrevious Page
1 2 3 4 5 ... 9