Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Chassis & Frame At Speedway Motors

Start your Classic Truck project right here at Speeway Motors with a wide variety of chassis & frames. Multiple frames and transmission cushions are available. Make sure your classic pickup truck project starts on the right track with reproduction frames rails right here at Speedway Motors!

"Classic Truck, Frame" Page 1 of 3

  • 3/4" RUBBER EXPANDING MOUNT
    $3.99
    Product Rating: 4.25 Stars
    3/4" RUBBER EXPANDING MOUNT
    (Part #715BM401)
    x
                

    If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.

    Not recommended for cars newer than 1934.

  • DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    (Part #35610393)
    x
                Reflect-A-GOLD is a metalized polyamide  polymer laminated glass cloth with a high temperature pressure sensitive  adhesive for use in extreme temperature swing environments. It is  lightweight and easy to apply and remove. 

    Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.

    • For firewalls, bulkheads, engine covers, floors, seat bottoms & more
    • Capable of handling continual temperatures up to 850°F
    • Resists UV degradation for long-term performance
    • Virtually NO clearance needed
    • Adhesive protected by a release liner rated up to 325°F
    • Light weight and flexible-Trim to size
    • Space age polymer material
    • Reflects up to 850°F! Reflecting 80% of heat!
    • Ultra light weight and self adhesive
  • Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember
    Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember
    (Part #91044754)
    x
                

    Our bolt-in Mustang II suspension kit for 1947-1954 Chevy half-ton and 3/4 ton pickups includes all hardware and instructions. 

    • Completely bolt in - no welding required
    • Based on proven Mustang II geometry
    • Complete with bolt in boxing plates to reinforce the frame
    • Interlocking design for ultimate strength
    • Threaded adjusters to fine tune ride height
    • Full lower A-arms required with this crossmember (strutless type)
    • Requires the use of a power rack and pinion and tubular control arms
    • NOT for use with air ride

    910-44754 Instructions (PDF)

    Note:  Use bolt-in motor mount kit 910-54754 to mount your S/B Chevy.
  • Painless Wiring 10104 21 Circuit GM Pickup Chassis Wiring Harness
    New
    Painless Wiring 10104 21 Circuit GM Pickup Chassis Wiring Harness
    (Part #91010104)
    x
                

    This customizable 21 circuit - 12 fuse w/ horn relay and Maxi Fuse pickup chassis wiring harness is made from Painless Performance. You'll find that the ample wire lengths make this kit especially suited for trucks with long beds and extended cabs.  These Painless wiring harnesses feature many pre-wired connections and are color coded to make installation a snap. Included with this harness are the following parts: a GM engineered fuse block & Painless mounting bracket, GM turn signal connectors, pre-wire plugs for the headlights, and a dimmer switch. Application intended for non-fuel injected engine and a non-electronic transmission.

    Includes Circuits for:

    • A/C & Heat
    • Accessory / Cigarette Lighter
    • Backup Lights
    • Brake Lights
    • Charging
    • Dome Light
    • Electric Choke
    • Emergency Flashers
    • Fan Relay Activation Power
    • Fused Power Source
    • Headlights
    • Horn (Relay)
    • Ignition Coil
    • Instrument Panel Lighting and Gauges ( Included wires for: fuel gauge, oil gauge, tachometer, temperature gauge, and voltmeter)
    • Park Lights
    • Radio/Clock (Constant and Switched) 
    • Starting
    • Tail Lights
    • Third Brake Light
    • Turn Signals
    • Wipers

    Connectors included:

    • GM Steering Column Turn Switch
    • Two Headlight Pigtails
    • 10SI & 12 SI Alternator
    • Dimmer Switch

  • Rubber GM Transmission Cushion
    Rubber GM Transmission Cushion
    (Part #91018016)
    x
                

    OEM-style rubber transmission cushion for many '58-'82 GM transmissions including TH350 auto, Muncie, Saginaw, and others.

    • Meets or exceeds OEM specifications 
    • Rubber formulation provides abrasion resistance and aging stability
    • Tough, hardened steel plate & inserts
    • Chemlock® bonding agent ensures superior rubber-to-metal bond
  • TRANS MOUNT-POLY-MOST GM
    $29.99
    Product Rating: 4.67 Stars
    TRANS MOUNT-POLY-MOST GM
    (Part #91025820)
    x
                

    Heavy duty Turbo 350 polyurethane replacement for original GM mounts. Features a built-in safety lock to prevent separation. For race or street race use.

    Fits "most" GM transmissions having a mount on the tailshaft. The bolt spacing for the tranny mount will accomodate 3-3/4" to 4-1/4" bolt pattern on the transmission. For TH350 application.

  • 1940-1941 Ford Pickup Running Boards
    1940-1941 Ford Pickup Running Boards
    (Part #9004038)
    x
                Smoothie custom style. Fit 1/2 ton pick-up and 1/2 ton panel (not for sedan delivery). Choose left hand or right hand. Fiberglass construction. Ships UPS oversize. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1953-56 Ford Half Ton Pickup Running Boards
    1953-56 Ford Half Ton Pickup Running Boards
    (Part #9005315)
    x
                Oversize UPS. Fiberglass construction. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Tubular Transmission Mount with 2 Inch Drop
    Tubular Transmission Mount with 2 Inch Drop
    (Part #91628903)
    x
                

    Universal rear transmission mounts and heavy duty tube crossmember. Fit most GM, Ford, and Mopar manual and auto transmissions. Black powder coated finish. Crossmember must be welded directly into frame or to 3 hole mounting flanges for bolt-in application. Fits frames up to 38" wide.

     

    Note: May require re-drilling of the mount holes when used with Ford C4/C6 trans cushion 910-18017.

  • Painless Wiring 10118 21 Circuit Wire Harness, 1967-77 Ford F-Series Pickup
    New
    Painless Wiring 10118 21 Circuit Wire Harness, 1967-77 Ford F-Series Pickup
    (Part #91010118)
    x
                

    This 21 circuit wiring harness from Painless Performance is a direct fit for your 1967-1977 Ford F-Series truck. This harness entails a unique covered micro-fuse block with a 20 amp auxiliary relay circuit for accessories such as fog lights, or fuel pump. Each wire is color coated for an easy installation. This harness also includes brand new headlight, ignition, dimmer, wiper, and brake switches. Made in the USA!

    Installation Instructions (PDF) 

    Harness includes circuits for:

    • A/C & Heat
    • Accessory (Relayed)
    • Accessory / Cigarette Lighter
    • Backup Lights
    • Brake Lights
    • Cargo Lamp
    • Charging
    • Dome Light
    • Electric Choke
    • Emergency Flashers
    • Fused Power Source
    • Headlights
    • Horn (Relay)
    • Ignition Coil
    • Instrument Panel Lighting and Gauges (Ammeter, Brake Warning Light, 4-Wheel Drive Light, Fuel Gauge, Oil Gauge, Tachometer, and Temp. Gauge)
    • Park Lights
    • Radio/Clock (Constant and Switched) 
    • Starting
    • Tail Lights and License Plate Light
    • Turn Signals
    • Wipers and Washer Pump

     

     

  • All-In-One Accessory Clamps
    $14.99
    All-In-One Accessory Clamps
    (Part #91032866)
    x
                

    These billet aluminum clamps are great for mounting and adjusting hood pins. The accessory bracket and 3.5" hose clamps can be added for holding power steering and radiator reservoir tanks.

    Available for 1”, 1.25”, 1.375”, or 1.50” tube sizes. Clamp is drilled and tapped ½” – 20 in the center, and 10-32 on the outsides.

    Hood pins and brackets sold separately.

  • Tubular Transmission Mount with 6 Inch Drop
    Tubular Transmission Mount with 6 Inch Drop
    (Part #91628905)
    x
                

    Universal rear transmission mounts and heavy duty tube crossmember. Fit most GM, Ford, and Mopar manual and auto transmissions. Black powder coated finish. Crossmember must be welded directly into frame or to 3 hole mounting flanges for bolt-in application. Fits frames up to 38" wide.

     

    Note: May require re-drilling of the mount holes when used with Ford C4/C6 trans cushion 910-18017.

  • Speedway Economy 12 Circuit Wiring Harness
    Speedway Economy 12 Circuit Wiring Harness
    (Part #91064017)
    x
                

    This harness was designed to offer you all the highest quality components in a package designed for cars with minimum accessories. Each wire is color coded and labeled every few inches.

    Our prewired 12 circuit kit will fit all your basic needs and makes wiring a painless process. It is designed especially for the street rod without accessories. It also includes horn relay and connector, turn and hazard signals, dimmer switch connector, circuit breaker for headlights, two flashers, one alternator plug, two ignition switch connectors, plus more.

    • Mainfuse box base is 1-7/8" x 3-11/16"
    • Box height is 3-3/4"
    12 Circuit Wiring Harness Installation Instructions (PDF)
  • DEi 010408 Cool-Tape Heat Reflective Tape, 1-3/8 Inch x 15 Ft.
    DEi 010408 Cool-Tape Heat Reflective Tape, 1-3/8 Inch x 15 Ft.
    (Part #35610408)
    x
                

    Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses.

    • Withstands direct heat up to 400°F and 2000°F radiant heat
    • Protects lines, hoses, cables, and more
    • Aluminized and bonded to fiberglass
    • Flexible and easy to apply
    • Strong self-adhesive backing
    • Use to secure panels, seal air boxes, wrap wiring & more

    Cool Tape Frequently Asked Questions (PDF)

  • Heidts Mustang II Crossmember for 1953-56 Ford F-100 Pickup Frame, Weld-On
    Heidts Mustang II Crossmember for 1953-56 Ford F-100 Pickup Frame, Weld-On
    (Part #41334425)
    x
                Please view the product's page for more information
            
  • Heatshield Armor Exhaust Wrap, 1/2 Inch Thick, 12 x 60 Inch Sheet
    Heatshield Armor Exhaust Wrap, 1/2 Inch Thick, 12 x 60 Inch Sheet
    (Part #91076005)
    x
                Stop heat at its source with Heatshield Armor exhaust wrap. It has an aluminum shell and inner ceramic liner that allows it to withstand continuous 1800 degree Farenheit temperatures. Best of all, it's flexible, easy to cut and simple to install using six 14" long stainless steel ties to wrap it around your pipes. Each kit contains a 1' x 5' section of material.
            
  • Thermo Tec 16000 Fire-Proof Shifter Boot
    Thermo Tec 16000 Fire-Proof Shifter Boot
    (Part #70413501)
    x
                

    The Fire-Proof Shifter Boot is made of woven silica with a flexible Mylar finish. The shifter boot was developed as a fire barrier for high-speed engine fires, which can burn away rubber boots in seconds. Thermo-Tec's Fire-Proof Shifter Boot gives the driver one more level of protection from engine fires and tunnel heat.  Includes boot only, mounting ring not included.

    Universal, fits many applications. 

  • Thermo Tec 13500 Adhesive-Backed Aluminized Heat Barrier, 12 x 12 Inch
    Thermo Tec 13500 Adhesive-Backed Aluminized Heat Barrier, 12 x 12 Inch
    (Part #70413500)
    x
                

    Protect parts and components from radiant heat. This special adhesive-backed material can be used to protect painted surfaces, plastic  parts and more. This heat barrier is composed of woven silica with a flexible aluminized finish and a strong adhesive. The reflective surface of the material is capable of withstanding   radiant temperatures of up to 2000ºF. Material can be easily applied to any surface or wrapped around hoses and wires for a clean professional appearance.

  • Thermo Tec 17062 Thermo-Flex Insulation, 5/8 Inch I.D. x 3 Ft.
    Thermo Tec 17062 Thermo-Flex Insulation, 5/8 Inch I.D. x 3 Ft.
    (Part #70417062)
    x
                

    Thermo-Flex heat shield is a composite material with unlimited uses. The material is manufactured to provide abrasion resistance, thermal insulation and physical containment of hoses and wiring. The combination of aluminum and silica produces a sleeving that is flexible, lightweight and strong. Thermo-Flex can be slit for applications such as wire looms or hosecovering without disconnecting the ends of the wire or hose.

    Thermo-Flex will withstand temperatures in excess of 750º F in radiant heat.

  • 1934 Ford Extended Cab Pickup Running Boards
    1934 Ford Extended Cab Pickup Running Boards
    (Part #103B185L)
    x
                

    Heavy gauge steel construction for strength. These are a smooth, no-covering style made 6" longer-than-stock to be used in conjunction with the extended cab 1934 Ford pickup assembly. Perfect mate to our extended frame rails. 

    Ready for prep and paint.

  • Aluminized Heat and Sound Insulation Shield, 4 x 6 Foot Sheets
    Aluminized Heat and Sound Insulation Shield, 4 x 6 Foot Sheets
    (Part #91080250)
    x
                

    These aluminized heat shields are constructed of two layers of 99.5% pure grade industrial aluminum, laminated to 3/8" fiber tech padding to achieve highest reflection of radiant heat and sound deadening. Includes 4 feet by 6 feet of thermal and noise insulation.

    • Insulates against heat, noise and cold 
    • Mold and mildew proof
    • Fire retardent
    • Reflects 97% of infrared energy
    • Fiberglass reinforced
    • Single-sided aluminum backing
    • 4' x 6' sheet
  • 60 PC GUSSET/TAB KIT
    $49.99
    $51.99
    Product Rating: 5.00 Stars
    60 PC GUSSET/TAB KIT
    (Part #91091025)
    x
                

    This Gusset Kit / Tab Kit includes:

    • (10) - Standard gussets with 1/2" hole
    • (10) - Standard 3 hole gussets
    • (10) - Chassis tab, 3/16" steel with 1/2" hole
    • (10) - Trick tab, 1/8" steel with 1/4" hole
    • (10) - Body tabs, .085" steel with 1/4" hole
    • (10) - seat belt tabs, 3/16" steel with 1/2" hole
  • Ford C4-Ford C6 Transmission Cushions
    Ford C4-Ford C6 Transmission Cushions
    (Part #91018017)
    x
                

    The studs on the Ford C4 or Ford C6 tranny mount are 10mm x 1.5 thread. It is a standard replacement mount that fits most Fords and is not uncommon, as metric fasteners have been used on domestic vehicles for over 25 years. For Ford C4 and Ford C6 application.

    The slots in the crossmember will require a little grinding to use this mount.

  • Painless 10106 22 Circuit Wiring Harness for 1975 and Later CJ Jeeps
    New
    Painless 10106 22 Circuit Wiring Harness for 1975 and Later CJ Jeeps
    (Part #91010106)
    x
                

    This 22-circuit wiring harness from Painless Performance is for your 1975 and later CJ Jeep. This is a customizable kit that routes the wires through a connector and the ignition switch is in the column. This kit includes GM column mounted ignition switch connectors and a GM column mounted turn signal switch connector pre-terminated and ready to install. Also included are pre-wire plugs for headlights and the dimmer switch.

    This harness includes circuits for:

    • A/C & Heat
    • Accessory / Cigarette Lighter
    • Backup Lights
    • Brake Lights
    • Charging
    • Dome Light
    • Electric Choke
    • Emergency flashers
    • Fan Relay Activation Power
    • Fused Power Source
    • Headlights
    • Horn (Relay)
    • Ignition Coil
    • Instrument Panel Lighting and Gauges (Includes wires for: Emergency Brake Light, Four-wheel drive light, fuel and oil gauge, tachometer, temperature gauge, and voltmeter)
    • Park Lights
    • Radio/Clock (Constant and Switched) 
    • Starting
    • Tail Lights
    • Third Brake Light
    • Turn Signals
    • Under Hood Light
    • Wipers

     

     

  • 1953-56 Ford Pickup Front Frame Boxing Plates
    1953-56 Ford Pickup Front Frame Boxing Plates
    (Part #91054425)
    x
                

    When using original or reproduction frame rails, be sure to fully box the front section for strength and saftey. Our front boxing plates are designed to box the frame in critical front suspension attachment points and motor mount areas.

    10 gauge.

  • MUST II IFS 47-54 CHEVY PU
    $449.99
    MUST II IFS 47-54 CHEVY PU
    (Part #413307)
    x
                Please view the product's page for more information
            
  • Universal Adjustable Frame Rail Bracket
    New
    Universal Adjustable Frame Rail Bracket
    (Part #91007211)
    x
                This slick little universal adjustable frame rail bracket fits inside your un-boxed frame rail to mount just about anything you can think of. It works especially well for a steering shaft support heim and has a specially sized and angled slot just for that purpose. It's  also no coincidence that the pre-drilled bolt holes also line up with  most popular electric fuel pumps and fuel filter brackets.
    • Plain mild steel
    • Includes all necessary hardware for bracket installation
    • Support heim not included
  • HEIDTS UNIV.60" X-MEMBER
    $449.99
    HEIDTS UNIV.60" X-MEMBER
    (Part #413202)
    x
                Please view the product's page for more information
            
  • DEi 010450 Titanium Exhaust Pipe Heat Shield, 6 Inch x 1 Ft.
    DEi 010450 Titanium Exhaust Pipe Heat Shield, 6 Inch x 1 Ft.
    (Part #35610450)
    x
                With the strategic placement of DEI’s Titanium Pipe Shield near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks or motorcycle pipes, radiant heat can be controlled for maximum protection and performance.  Other uses include isolated areas such as sections of the exhaust pipe after the collector, an area that can heat transmission fluid, or along the path of an exhaust system in proximity of gas tanks, differentials and rear facias. The shield is designed for multiple automotive applications as well as marine, powersports, diesel and industrial applications where heat dissipation and thermal control is needed.
    • Capable of handling high temperature exposure up to 1350° F
    • Protects heat sensitive components, hoses, lines and electrical wiring
    • Easy to install with unique rivet-based pipe standoff brackets and pipe clamps
    • Reduces heat from entering vehicle when placed on exhaust pipes
    • Simple to re-position
    • 6" Wide x 1' Long
  • Speedway 1953-1956 Ford F-100 Truck Mustang II Crossmember
    Speedway 1953-1956 Ford F-100 Truck Mustang II Crossmember
    (Part #91034425)
    x
                Please view the product's page for more information
            
  • 1947-1954 Chevy 1/2 Ton Pickup Truck Frame Rails
    1947-1954 Chevy 1/2 Ton Pickup Truck Frame Rails
    (Part #91604754)
    x
                

    Build a firm foundation for your vintage 1947-54 Chevy 1/2 ton pickup without picking up a welder! This innovative line of chassis components from Speedway Motors allows the do-it-yourself rodder to assemble a frame using only basic hand tools and a drill.

    • Laser cut from 7-gauge steel plate
    • Replicates shape and dimensions of original Chevy frame
    • Welded on a rail fixture to ensure proper shape
    • Ground and sanded to prep for finishing
    • For '47-'54 1/2 pickups

    916-04754 Instructions (PDF)

    NOTE: Finish will be plain steel, not powder coated as shown.

  • Tubular Transmission Mount with 8 Inch Drop
    Tubular Transmission Mount with 8 Inch Drop
    (Part #91628906)
    x
                

    Universal rear transmission mounts and heavy duty tube crossmember. Fit most GM, Ford, and Mopar manual and auto transmissions. Black powder coated finish. Crossmember must be welded directly into frame or to 3 hole mounting flanges for bolt-in application. Fits frames up to 38" wide.

     

    Note: May require re-drilling of the mount holes when used with Ford C4/C6 trans cushion 910-18017.

  • ReflectACool 12" x 24"
    $14.99
    $20.30
    ReflectACool 12" x 24"
    (Part #35610461)
    x
                

    Reflect-A-Cool, constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a racecar where typical mechanical fasteners cannot be used and has many industrial uses.

    Reflect-A-Cool can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It’s that easy.

    • Protect wires, cables, hoses, pipes & tubing from radiant heat sources
    • Radiant heat protection up to 2000°F
    • Self-adhesive backing with release liner for easy installation
    • Moisture & solvent resistant
    • Virtually NO clearance needed

    Reflect-A-Cool Frequently Asked Questions (PDF)

  • Thermo Tec 14002 Thermo-Shield Thermal Tape
    Thermo Tec 14002 Thermo-Shield Thermal Tape
    (Part #70414002)
    x
                

    Thermo-Shield protects hoses and wires from radiant heat. Thermo-Shield is used in applications where it is difficult or not practical to disconnect one end of the hose or wire. NOT FOR USE ON EXHAUST PIPE.

    The adhesive-backed composite construction tape can easily be wrapped around the hose or wire to make a clean, professional appearance and protect parts from over 90% of radiant heat up to 2000 degrees Fahrenheit.

    Comes in a 1-1/2" wide x 15' foot roll.

  • Bolt-In 1935-40 Ford Mustang II Crossmember
    Bolt-In 1935-40 Ford Mustang II Crossmember
    (Part #91043540)
    x
                Please view the product's page for more information
            
  • Heidts 1955-59 Chevy Truck Econo Mustang II Crossmember
    Heidts 1955-59 Chevy Truck Econo Mustang II Crossmember
    (Part #41334429)
    x
                Please view the product's page for more information
            
  • Straight Tubular Transmission Mount
    Straight Tubular Transmission Mount
    (Part #91628902)
    x
                

    Universal rear transmission mounts and heavy duty tube crossmember. Fit most GM, Ford, and Mopar manual and auto transmissions. Black powder coated finish. Crossmember must be welded directly into frame or to 3 hole mounting flanges for bolt-in application. Fits frames up to 38" wide.

     

    Note: May require re-drilling of the mount holes when used with Ford C4/C6 trans cushion 910-18017.

  • Speedway Universal 20 Circuit Wiring Harness
    Speedway Universal 20 Circuit Wiring Harness
    (Part #91064027)
    x
                Please view the product's page for more information
            
  • Speedway 1955-1959 Chevy Truck Crossmember
    Speedway 1955-1959 Chevy Truck Crossmember
    (Part #91034429)
    x
                Please view the product's page for more information
            
  • Small Block Ford Crossmember Motor Mount
    Small Block Ford Crossmember Motor Mount
    (Part #91618013)
    x
                Universal mount allows 260-289-302-351W S/B Fords and 1970-1974 Cleveland engines with front sump oil pan to be installed into most frames up to 38" wide. Cut for frame width, then bolt or weld in.   

    Note: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

Goto Previous PagePrevious Page
1 2 3