Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 3

Products

Floor

Shop Classic Truck Body, Interior, Gauges At Speedway Motors

Speedway Motors is the classic pickup truck source for body parts, gauges, and interior accessories! Find all the essential fiberglass fenders, hoods, tailgates, gauge sets by Stewart Warner and Auto Meter, and vintage gas caps, in our online catalog. While you are there, check out our emblems and decals, rear and side view mirrors, windshields, fiberglass hoods and step plates. Don't forget about Speedway's vintage seats and seat belts for your classic truck, too!

Featured Products
  • DEi 050501 Floor/Tunnel Shield II, Heat/Sound Insulation, 2 Ft x 21 In
    DEi 050501 Floor/Tunnel Shield II, Heat/Sound Insulation, 2 Ft x 21 In
    (Part #35650501)
    x
                

    Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue.  Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.

    Constructed with an embossed 10 mil aluminum face bonded to 1/8” composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16” thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.

    With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.

    Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations – anywhere to reflect damaging heat.

    • Ideal for firewalls, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells, under hoods & more
    • Blocks radiant heat from entering driver compartment
    • Withstands direct high heat temperatures up to 1750°
    • Serves as a barrier to unwanted road, tire, & engine noise
    • Constructed from 10 mil aluminum bonded to finely woven layer of high temperature resistant glass fiber
    • Easy to form to shapes and contours
    • Excellent heat & sound barrier
    • Wind and water will not affect adhesive
    • Minimum clearance required, only 3/16” thick
    • Just trim, peel & stick
    • Aggressive self-adhesive backing holds past 450°F
    • Withstands 1750°F direct continuous heat
    • Use to shield & reflect unwanted heat
    • Multiple uses
    • Adheres to almost any surface or material including to fiberglass

    Floor & Tunnel Shield Installation Instructions (PDF)

    Floor and Tunnel Shield Frequently Asked Questions (PDF)

    Learn more about identifying and solving vehicle noise issues by reading Boom Mat's tech article. Science of Noise.

    Learn more about the advantages of Boom Mat insulation as well as proper installation by reading Super Chevy Magazine's tech article. Boom Mat Installation - Quiet Cabin.

  • DEi 050503 Floor/Tunnel Shield II, Heat/Sound Insulation, 4 Ft x 42 In
    DEi 050503 Floor/Tunnel Shield II, Heat/Sound Insulation, 4 Ft x 42 In
    (Part #35650503)
    x
                

    Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue.  Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.

    Constructed with an embossed 10 mil aluminum face bonded to 1/8” composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16” thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.

    With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.

    Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations – anywhere to reflect damaging heat.

    • Ideal for firewalls, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells, under hoods & more
    • Blocks radiant heat from entering driver compartment
    • Withstands direct high heat temperatures up to 1750°
    • Serves as a barrier to unwanted road, tire, & engine noise
    • Constructed from 10 mil aluminum bonded to finely woven layer of high temperature resistant glass fiber
    • Easy to form to shapes and contours
    • Excellent heat & sound barrier
    • Wind and water will not affect adhesive
    • Minimum clearance required, only 3/16” thick
    • Just trim, peel & stick
    • Aggressive self-adhesive backing holds past 450°F
    • Withstands 1750°F direct continuous heat
    • Use to shield & reflect unwanted heat
    • Multiple uses
    • Adheres to almost any surface or material including to fiberglass

    Floor & Tunnel Shield Installation Instructions (PDF)

    Floor and Tunnel Shield Frequently Asked Questions (PDF)

    Learn more about identifying and solving vehicle noise issues by reading Boom Mat's tech article. Science of Noise.

    Learn more about the advantages of Boom Mat insulation as well as proper installation by reading Super Chevy Magazine's tech article. Boom Mat Installation - Quiet Cabin.

  • DEi 050220 Boom Mat Spray On Sound Deadening, 18 oz. Can
    DEi 050220 Boom Mat Spray On Sound Deadening, 18 oz. Can
    (Part #35650220)
    x
                
    Reduce unwanted road noise and deaden vibrations in hard to reach places with Boom Mat's new Spray On sound deadener. Works perfect for trunk interiors, fender wells, undercarriage, body panels, rear quarters, inside door panels, and many more. Boom Mat Spray On also works as a thermal barrier to insulate against unwanted heat. Will eliminate any unwanted sound, vibration, or heat in any vehicle!
    • Reduce unwanted road noise and vibration
    • Won't crack or chip
    • Can be applied in multiple layers
    • Helps prevent rust
    • Paintable in 6 hours
    • Single can will cover approximately 20 sq. ft.
    • Handles temperatures up to 300 F
  • HushMat Ultra Floor/Dash Kit-Thermal & Sound Insulation
    HushMat Ultra Floor/Dash Kit-Thermal & Sound Insulation
    (Part #91080511)
    x
                

    A HushMat Ultra Floor/Dash Kit is universal to treat all full size vehicles.HushMat Ultra reduces road noise, heat and eliminates vibration. It also provides thermal insulation from the engine heat, exhaust heat through the floor and drive train heat through the tunnel.Confirmed in an independent study HushMat Ultra outperforms competitive brands by reducing heat by over 40%!

    • HushMat Ultra requires no surface cleaning/ preparation or heat guns to install
    • Withstands temperatures from -30 degrees up to +400 degrees Fahrenheit
    • NO surface prep - no alcohol or acetone wash needed
    • No installation tools or heat guns required
    • Self Adhesive peel and stick – no secondary glue and NO spray<
    • Trims with razor knife or household scissors
    • Installs in 1/2 the time versus other brands

    HushMat Floor Dash Kit contains twenty (20) 12.1” x 23” sheets or 39 Square Feet of OEM Approved Ultra damping/insulating material. HushMat sheets are easy for one person to handle and install.

    Use a Floor/Dash Kit and HushMat Silencer Megabond 1/2" foam for the ultimate sound and thermal insulating performance. Check out Speedway’s HushMat ‘32 Coupe and ‘32 Sedan full vehicle kits for the manufacturer recommended kits for the complete vehicle.

    910-80511 Installation Guide(PDF)

    HushMat Ultra Details(PDF)

    Enjoy a Cool, Quiet and Comfortable Ride with HushMat

    Floor Dash Kit Application area: Interior side of the following: Firewall, Floor Pan, Tunnel, Rear Wheel Wells.

    See the GoodGuys Article

    HushMat 32 Ford Installation Guide(PDF)

  • HushMat 40100 Ultra H-2-O Damping and Sealing Paste
    HushMat 40100 Ultra H-2-O Damping and Sealing Paste
    (Part #91080518)
    x
                

    HushMat Ultra H-2-O is a water based formula that is designed to maintain flexibility when cured. Ultra H-2-O is perfect for damping trunk lids, hard to reach areas and for sealing floor pan seams between welds. HushMat Ultra H-2-O is water based so it cleans up with a damp rag. Each HushMat Ultra H-2-O tube comes with a custom designed, flat “EZ Squeeze” nozzle that can be cleaned out with water and re-used. HushMat Ultra H-2-O is:

    • Paintable and sandable when cured
    • Cures in 3 hours or less
    • One Part Water Based formula
    • No Ventilation, tools or other application equipment required
    • Outperforms spray damping materials by over 10 times

    HushMat Ultra H-2-O is great for damping those hard to reach areas inside the door frame and rear quarter panels and for sealing body panels and enclosures. HushMat Ultra H-2-O’s chemistry allows for adhesion to sheet metal, wood and fiberglass surfaces and maintains flexibility when cured.

    See the GoodGuys Article.

    910-80518 Details (PDF)

  • Dynamat 10455 Xtreme Bulk Pack Cut-to-Fit Thermal and Sound Insulation
    Dynamat 10455 Xtreme Bulk Pack Cut-to-Fit Thermal and Sound Insulation
    (Part #31010455)
    x
                

    Reduce road noise and vibration while making your stereo sound twice as good fast with Dynamat. By first laying down a layer of Dynamat Xtreme, you will make your car quiet and cooler. Add another layer of Dynaliner and you will make it even cooler. Or a layer of Dynapad and make it quieter. A Dyna-Roller will make installation easy. 

    Kit contains nine 18" x 32" pieces (36 square feet) of Dynamat Xtreme (.067" thick) for rear decks, doors, floors and trunk floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels, under-hood installations and multi-purpose use.

    Simply measure your application to order the necessary amount. This product dramatically cuts heat and noise from inside the vehicle for more enjoyable cruising and every day driving.

    • Use to get more bass, more music, lower road noise and better sound
    • Kit contains (9) nine 18" x 32" pieces (36 square feet)
    • Simply measure and cut to fit your application

    Dynamat Information Sheet (PDF)

    Dynamat Tech Spec Sheet (PDF)

  • HushMat Ultra Trunk Kit - Thermal & Sound Insulation
    HushMat Ultra Trunk Kit - Thermal & Sound Insulation
    (Part #91080509)
    x
                

    A HushMat Ultra Trunk Kit is universal and designed to treat a mid-size trunk. HushMat Ultra reduces vibration and rear end road noise. It also reduces that drone from your exhaust system. Hear the rumble on the outside and Cool and Quiet on the inside with a HushMat Trunk Kit.

    • HushMat Ultra requires no surface cleaning/ preparation or heat guns to install
    • Withstands temperatures from -30 degrees up to +400 degrees Fahrenheit
    • Easy to mold around uneven surfaces
    • NO surface prep - no alcohol or acetone wash needed
    • No installation tools or heat guns required
    • Self Adhesive peel and stick – no secondary glue and NO spray
    • Trims with razor knife or household scissors
    • Installs in 1/2 the time versus other brands
    • Available in Silver or Black Foil

    HushMat Trunk Kit contains ten (10) 12” x 23” sheets or 19.1 Square Feet of OEM Approved Ultra damping/insulating material. HushMat sheets are easy for one person to handle and install.

    For the Highest performance install the HushMat Ultra Trunk Kit and HushMat Silencer Megabond 1/2" foam (Speedway Part #910-80524) on the Trunk Floor and over the wheel wells. Then install HushMat Ultra H2O damping paste (Speedway Part #910-80518) on the Trunk Lid for the ultimate sound and thermal insulating performance. Check out Speedway’s HushMat ‘32 Coupe and ‘32 Sedan full vehicle kits for the manufacturer recommended kits for the complete vehicle.

    910-80509 Installation Guide(PDF)

    HushMat Ultra Details(PDF)

    Enjoy a Cool, Quiet and Comfortable Ride with HushMat.

    Trunk Kit Applicaiton area: Interior side of the following: Trunk Floor, Wheel Wells, Rear Quarter Panels, Trunk Lid.

    See the GoodGuys Article.

    HushMat 32 Ford Installation Guide(PDF)

  • LizardSkin 50100 Ceramic Thermal & Sound Insulation, 2 Gallon
    LizardSkin 50100 Ceramic Thermal & Sound Insulation, 2 Gallon
    (Part #91044050)
    x
                LizardSkin is a revolutionary product that can lower the interior temperature of a vehicle from 25 to 30 degrees. With only a .040" thick application, LizardSkin can also lower the interior noise level by 10 - 12 decibels by forming a 100% sealed seamless membrane over 100% of the car's interior. LizardSkin can also be used on the exterior of a vehicle and when used in wheel wells it reduces the chance of starring from thrown rocks. Since it is impervious to moisture after drying,  it helps to seal the surface to which it is applied. 

    Sold in two-gallon buckets. Each covers 45-50 sq. ft. at 0.040" thickness dry. Add their Sound Control, also a spray-on, water-based product, and dramatically reduce interior noise even more.

    • Class A fire-rated
    • Environmentally friendly solution
    • Provides non-combustible thermal insulation
    • Eliminates cut and paste waste
    • Able to withstand temperatures up to 500°F
    • Adheres to most any material
    • Continuous protective moisture barrier
    • One-part coating system
    • Lightweight (around 0.1 lbs/ft2)
    • No respirator needed; but dust mask/protective eyewear is recommended
    • Easy spray-on application
    • Can be easily applied to irregular surfaces and geometries
    • Offers a protective, seamless membrane
    • Fast clean up with soap and water

    Spec Sheet (PDF)

Filter

"Classic Truck, Floor" Page 1 of 3

Page 1 of 3

  • DEi 050200 Boom Mat Damping Material, 12 x 12-1/2 Inch, 2 Sheets
    DEi 050200 Boom Mat Damping Material, 12 x 12-1/2 Inch, 2 Sheets
    (Part #35650200)
    x
                Please view the product's page for more information
            
  • HushMat 20200 Silencer Megabond 1/4 In. Sound & Thermal Insulation Kit
    HushMat 20200 Silencer Megabond 1/4 In. Sound & Thermal Insulation Kit
    (Part #91080522)
    x
                

    A HushMat Silencer Megabond ¼” Sound and Thermal Insulating Kit is universal and designed to treat two full size doors or one full sized headliner. HushMat Silencer Megabond reduces airborne noise and radiant heat through absorption.

    • Silencer Megabond is formulated to withstand the automotive environment
    • Withstands temperatures from -30 degrees up to +280 degrees Fahrenheit
    • Absorbs airborne noise from 600 – 4000 Hz frequency
    • Easy to mold around uneven surfaces
    • Self Adhesive peel and stick – no secondary glue and NO spray
    • Trims with razor knife or household scissors
    HushMat Door Kit contains two (2) 23” x 36” sheets or 11.5 Square Feet of OEM Approved foam insulating material.

    Use HushMat Silencer Megabond 1/4" foam on the back side of the door trim panel and HushMat Ultra Door Kit (Speedway Part #

  • DEi 050503 Floor/Tunnel Shield II, Heat/Sound Insulation, 4 Ft x 42 In
    DEi 050503 Floor/Tunnel Shield II, Heat/Sound Insulation, 4 Ft x 42 In
    (Part #35650503)
    x
                

    Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue.  Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.

    Constructed with an embossed 10 mil aluminum face bonded to 1/8” composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16” thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.

    With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.

    Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transm

  • DEi 050218 Boom Mat Installation Roller
    $11.99
    $15.39
    Product Rating: 5.00 Stars
    DEi 050218 Boom Mat Installation Roller
    (Part #35650218)
    x
                Please view the product's page for more information
            
  • Dynamat 21100 Dynapad Thermal & Sound Insulation 3/8 Inch Thick
    Dynamat 21100 Dynapad Thermal & Sound Insulation 3/8 Inch Thick
    (Part #31021100)
    x
                

    You may not be Chip Foose, but you can use the same Dynamat products Chip does. By first laying down a layer of Dynamat Xtreme, you will make your car quiet and cooler. Add another layer of Dynaliner and you will make it even cooler. Or a layer of Dynapad and make it quieter. A Dyna-Roller will make installation easy. 

    DynaPad is a four-layer composite barrier material utilizing a 1 pound per square foot vinyl barrier that is sandwiched between two layers of 3/16 inch thick acoustic foam with a urethane top layer. DynaPad is designed to provide an under carpet sound barrier in automotive interiors, residential and commercial dwellings. The material can withstand temperature ranges between -40ºF and +225ºF (-40ºC to +107ºC)

    This DynaPad is used primarily on the floor. DynaPad is optimized for use under carpet in automotive, residential and commercial applications. It is also used in other applications requiring acoustic barrier foam systems.

    Dynapad Information Sheet (PDF)

  • DEi 050501 Floor/Tunnel Shield II, Heat/Sound Insulation, 2 Ft x 21 In
    DEi 050501 Floor/Tunnel Shield II, Heat/Sound Insulation, 2 Ft x 21 In
    (Part #35650501)
    x
                

    Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue.  Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.

    Constructed with an embossed 10 mil aluminum face bonded to 1/8” composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16” thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.

    With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.

    Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, fl

  • DEi 050113 Under Carpet Lite, Sound Absorbion & Insulation, 54 x 72 In
    DEi 050113 Under Carpet Lite, Sound Absorbion & Insulation, 54 x 72 In
    (Part #35650113)
    x
                Please view the product's page for more information
            
  • DEi 050110 Under Carpet Lite, Sound Absorbion & Insulation, 24 x 54 In
    DEi 050110 Under Carpet Lite, Sound Absorbion & Insulation, 24 x 54 In
    (Part #35650110)
    x
                Please view the product's page for more information
            
  • DEi 050507 Boom Mat Floor & Tunnel Shield II 21 x 24 Inch
    DEi 050507 Boom Mat Floor & Tunnel Shield II 21 x 24 Inch
    (Part #35650507)
    x
                

    Boom Mat offers this heat and sound insulation floor and tunnel shield in a 21" x 24" sheet. Protect yourself from radiant heat from entering the driver compartment and also from road, tire, and engine noise. Boom Mat has constructed this shield from 10 mil aluminum bonded to a finely woven layer of high temperature resistant glass fiber. Perfect for firewalls, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells and under hoods. Will also work great for any application you can think of because it can adhere to almost any surface including fiberglass.

    • Peel, trim & stick application
    • Use to shield & reflect unwanted heat
    • Only 3/16” thick
    • Aggressive adhesive backing
    • Withstands 1750°F direct continuous
    • 21"x24"

    Floor & Tunnel Shield Installation Instructions (PDF)

    Floor and Tunnel Shield Frequently Asked Questions (PDF)

    Learn more about identifying and solving vehicle noise issues by reading Boom Mat's tech article. Science of Noise.

  • DEi 050508 Boom Mat Floor & Tunnel Shield II 21 x 48 Inch
    DEi 050508 Boom Mat Floor & Tunnel Shield II 21 x 48 Inch
    (Part #35650508)
    x
                Please view the product's page for more information
            
  • DEi 050121 Boom Mat Leather Look Sound Barrier, 48 x 48 Inch
    DEi 050121 Boom Mat Leather Look Sound Barrier, 48 x 48 Inch
    (Part #35650121)
    x
                Please view the product's page for more information
            
  • DEi 05204 Boom Mat Damping Material, 12 x 12-1/2 Inch, 8 Sheets
    DEi 05204 Boom Mat Damping Material, 12 x 12-1/2 Inch, 8 Sheets
    (Part #35650204)
    x
                Please view the product's page for more information
            
  • DEi 050103 Boom Mat Moldable Noise Barrier, 24 x 54 Inch
    DEi 050103 Boom Mat Moldable Noise Barrier, 24 x 54 Inch
    (Part #35650103)
    x
                Please view the product's page for more information
            
  • DEi 050100 Boom Mat Under Carpet Sound Deadening Layer, 24 x 54 Inch
    DEi 050100 Boom Mat Under Carpet Sound Deadening Layer, 24 x 54 Inch
    (Part #35650100)
    x
                Please view the product's page for more information
            
  • DEi 050509 Boom Mat Floor & Tunnel Shield II 42 x 48 Inch
    DEi 050509 Boom Mat Floor & Tunnel Shield II 42 x 48 Inch
    (Part #35650509)
    x
                

    Boom Mat offers this heat and sound insulation floor and tunnel shield in a 42" x 48" sheet. Protect yourself from radiant heat from entering the driver compartment and also from road, tire, and engine noise. Boom Mat has constructed this shield from 10 mil aluminum bonded to a finely woven layer of high temperature resistant glass fiber. Perfect for firewalls, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells and under hoods. Will also work great for any application you can think of because it can adhere to almost any surface including fiberglass.

    • Peel, trim & stick application
    • Use to shield & reflect unwanted heat
    • Only 3/16” thick
    • Aggressive adhesive backing
    • Withstands 1750°F direct continuous
    • 42"x48"

    Floor & Tunnel Shield Installation Instructions (PDF)

    Floor and Tunnel Shield Frequently Asked Questions (PDF)

    Learn more about identifying and solving vehicle noise issues by reading Boom Mat's tech article. Science of Noise.

  • Dynamat 10455 Xtreme Bulk Pack Cut-to-Fit Thermal and Sound Insulation
    Dynamat 10455 Xtreme Bulk Pack Cut-to-Fit Thermal and Sound Insulation
    (Part #31010455)
    x
                

    Reduce road noise and vibration while making your stereo sound twice as good fast with Dynamat. By first laying down a layer of Dynamat Xtreme, you will make your car quiet and cooler. Add another layer of Dynaliner and you will make it even cooler. Or a layer of Dynapad and make it quieter. A Dyna-Roller will make installation easy. 

    Kit contains nine 18" x 32" pieces (36 square feet) of Dynamat Xtreme (.067" thick) for rear decks, doors, floors and trunk floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels, under-hood installations and multi-purpose use.

    Simply measure your application to order the necessary amount. This product dramatically cuts heat and noise from inside the vehicle for more enjoyable cruising and every day driving.

    • Use to get more bass, more music, lower road noise and better sound
    • Kit contains (9) nine 18" x 32" pieces (36 square feet)
    • Simply measure and cut to fit your application

    Dynamat Information Sheet (PDF)

    Dynamat Tech Spec Sheet (PDF)

  • DEi 050120 Boom Mat Leather Look Sound Barrier, 24 x 48 Inch
    DEi 050120 Boom Mat Leather Look Sound Barrier, 24 x 48 Inch
    (Part #35650120)
    x
                Please view the product's page for more information
            
  • Dynamat 11103 Dynaliner Thermal & Sound Insulation, 1/2 Inch Thick
    Dynamat 11103 Dynaliner Thermal & Sound Insulation, 1/2 Inch Thick
    (Part #31011103)
    x
                

    Dynaliner is the perfect ultra light weight thermal and sound insulator to use on top of Dynamat. This durable crush and tear resistant material has the highest heat blocking properties available in a single layer synthetic foam-type material.

    Dynaliner isn’t affected by oil and does not absorb water. Dynaliner provides acoustic isolation and excellent thermal insulation for roof, firewall, floor, quarter panels, doors and even as a hoodliner.

    • IsolateVibrations
    • Reduce Noise
    • Block Heat
    • Peel and Stick Application
    • Oil and Water Resistant
    • Ultra Light and Flexible
    Application: A high efficiency, general purpose thermo- acoustic foam available in 1/8”, 1/4” and 1/2” thickness. Dynaliner provides high acoustic absorption and excellent thermal insulation for roof, firewall, floor, quarter panels, doors and more. See chart for application recommendations.

    Dynamat Information Sheet

    Dynamat Tech Spec Sheet 

    Dynamat Application Recommendation Chart

  • HushMat Ultra Bulk Kit, Thermal and Sound Insulation
    HushMat Ultra Bulk Kit, Thermal and Sound Insulation
    (Part #91080515)
    x
                A HushMat Ultra Bulk Kit is universal and designed to treat an entire small car.   It is the best kit to purchase if you are doing a complete vehicle build. HushMat Ultra reduces temperature, vibration and road noise.  HushMat is the #1 Rated sound and thermal insulator by Corvette Restorer Magazine.Hear the rumble on the outside and Cool and Quiet on the inside with a HushMat Bulk Kit.

        * HushMat Ultra requires no surface cleaning/preparation or heat guns to install
        * Withstands temperatures from -30 degrees up to +400 degrees Fahrenheit
        * Easy to mold around uneven surfaces
        * NO surface prep - no alcohol or acetone wash needed
        * No installation tools or heat guns required
        * Self Adhesive peel and stick; no secondary glue and NO spray
        * Trims with razor knife or household scissors
        * Installs in 1/2 the time versus other brands
        * Available in Silver or Black Foil

    HushMat Bulk Kit contains thirty (30) 12” x 23” sheets or 58.1 Square Feet of OEM Approved Ultra damping/insulating material. HushMat sheets are easy for one person to handle and install.  

    For the Highest performance install the HushMat Ultra Bulk Kit and HushMat Silencer Megabond 1/2" foam (Speedway Part #910-80524) on the Trunk F
  • Dynamat 21203 DynaDeck
    $164.99
    $174.99
    Product Rating: 5.00 Stars
    Dynamat 21203 DynaDeck
    (Part #31021203)
    x
                

    DynaDeck is a waterproof floor liner that's a great alternative to carpet. This ultra-durable carpet replacement is made of high grade 3/8” waterproof liner, utilizing a 1lb/sq.ft. vinyl barrier over a 1/4” high efficiency thermoacoustic foam. It has a durable deep twist embossed vinyl grain top facing. Matches the textured flooring of vintage cars, trucks and jeeps.

    36" x 54" roll.

Goto Previous PagePrevious Page
1 2 3