Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Brakes At Speedway Motors

Speedway Motors is the #1 authority on disc brakes conversion kits. With the most experience in the Classic Pickup Truck business, you can be assured that you are getting a quality, excellent fitting kit. Insist on a Speedway front disc brake conversion kit for your classic truck. Don't forget to check out our huge selection of brake rotors, high volume master cylinders, proportioning valves and blocks. Stock up on all the essential brake lines, brake calipers, brake pads and fittings, too!

"Classic Truck, Drum Brakes and Accessories" Page 1 of 1

  • Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 1-3/4 Inch
    Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 1-3/4 Inch
    (Part #91065410)
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    • Wheel Cylinder Inlet: 7/16"-20 straight thread
      • NOT 7/16"-20 IFF
      • Inlet fitting will require a sealing washer or O-ring style fitting
    • Bolt Pattern: 3-3/8" center-to-center both horizontal and vertically
      • If using Model A or B spindles the holes will have to be elongated inward to fit the narrower bolt pattern
      • We recommend use of adapter rings 916-31928 to keep the spindle centered in the backing plate

     

  • Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 1-3/4 Inch
    Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 1-3/4 Inch
    (Part #91065430)
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    • Wheel Cylinder Inlet:  7/16"-24 IFF
      • To connect an AN 3 hose, use (2) of 910-318-7/16"
      • To connect a 3/16" steel line, use (2) of 910-3183-7/16"
    • Bolt Pattern:  3-3/8" center to center both horizontal and vertically
    • Use with park brake cables typical of '39-'48 Ford passenger cars
  • Currie 96237 11 Inch Replacement Brake Drum for 9-Plus Kits
    Currie 96237 11 Inch Replacement Brake Drum for 9-Plus Kits
    (Part #91096237)
    x
                These 11" brake drums are replacement for Currie 9-Plus drum brake kits and are designed for use with 5 on 4-1/2" and 5 on 4-3/4" bolt patterns.
    • 11" Brake Drum
    • 5 on 4-1/2" & 5 on 4-3/4" Wheel Bolt Patterns
    • Replacement for 9-Plus drum brake kits
    • Stud holes to fit all 9+ standard wheel studs
    • 2.800" center register hole
    • Sold Each
  • 12 x 2 Brake Drum for Bendix Style 1937-48 Ford Brakes
    12 x 2 Brake Drum for Bendix Style 1937-48 Ford Brakes
    (Part #91065400)
    x
                We offer these new iron 12" x 2" brake drums with a 5 on 5-1/2" bolt circle, which are impossible to find elsewhere. Use this brake drum with our Bendix Style self-energizing 12" x 1-3/4" or 12" x 2" backing plate assemblies for 1937-1948 Ford.
            
  • Currie 96227 11 x 2-1/4 Inch Drum Brake Kit w/5 x 4-1/2 and 5 x 4-3/4 BP
    Currie 96227 11 x 2-1/4 Inch Drum Brake Kit w/5 x 4-1/2 and 5 x 4-3/4 BP
    (Part #91096227)
    x
                

    9-Plus offers these drum brake kits, compatible with new style "big" ford 9" rearends.  They are a complete 11" drum brake kit with drums that are double drilled in both 5 on 4-1/2" and 5 on 4-3/4" wheel bolt patterns. This brake kit is ABCS standard which means it fits the late model large bearing (Torino) style housing end, a 2.500" brake space axle, and the drums feature a 2.800" center register hole.  Register refers to the size of the hole in the center of the brake drum.  With the axle installed in the housing, the brake space is the distance from the outside of the housing end, to the outside of the axle flange.

    • ABCS standard
    • All brand new fully-loaded assemblies
    • Double drilled for 5 on 4-1/2" and 5 on 4-3/4" wheel bolt patterns
    • For use with late model large bearing (Torino) style housings
    • Complete 11" drum brake kit
  • Ford Racing 11 Inch Drum Brake Kit, 2-1/2 Offset
    Ford Racing 11 Inch Drum Brake Kit, 2-1/2 Offset
    (Part #91031937)
    x
                We offer these rear drum brake kits for popular 9" Ford rear axles. Each kit has new 11" x 2-1/4" drums, backing plates, shoes, wheel cylinders, springs, emergency brake arm and hardware.  

    Fits New style Big Ford housing with 2-1/2" axle offset and 3.15" axle bearing. Drums drilled for 5 on 4-1/2" bolt pattern.

    Axle Flange Identification Chart (Link)

  • Early Ford Banjo Rear End Brake Drum/Axle Retainer
    Early Ford Banjo Rear End Brake Drum/Axle Retainer
    (Part #91031365)
    x
                If you snap an axle in your non-safety-hub-equipped 1939-48 Ford banjo rear end, you can stop the loss of the brake drum and axle stub with this kit. Includes 2 bolt-on brackets and hardware.
            
  • Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 2 Inch
    Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 2 Inch
    (Part #91065420)
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    Wheel Cylinder Inlet: 7/16"-20 straight thread
    NOT 7/16"-20 IFF
    Inlet fitting will require a sealing washer or O-ring style fitting
    Bolt Pattern: 3-3/8" center-to-center both horizontal and vertically
    If using Model A or B spindles the holes will have to be elongated inward to fit the narrower bolt pattern

    We recommend use of adapter rings 916-31928 to keep the spindle centered in the backing plate 

  • Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    (Part #91065440)
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    • Wheel Cylinder Inlet:  7/16"-24 IFF
      • To connect an AN 3 hose, use (2) of 910-318-7/16"
      • To connect a 3/16" steel line, use (2) of 910-3183-7/16"
    • Bolt Pattern:  3-3/8" center to center both horizontal and vertically
    • Use with park brake cables typical of '39-'48 Ford passenger cars
  • Garage Sale - Ford 9 Inch Drum Brake Backing Plate, Right
    Garage Sale
    Garage Sale - Ford 9 Inch Drum Brake Backing Plate, Right
    (Part #91031927.RGS)
    x
                

    We offer these rear drum brake backing plates for small Ford 9" Ford rear axles. Those are sold as each, left or right.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    Garage Sale
    Garage Sale - Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    (Part #UP33030)
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

     

    These are garage sale priced because they are missing the bottom springs.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - Ford 9 Inch Drum Brake Backing Plate, Left
    Garage Sale
    Garage Sale - Ford 9 Inch Drum Brake Backing Plate, Left
    (Part #91031927.LGS)
    x
                

    We offer these rear drum brake backing plates for small Ford 9" Ford rear axles. Those are sold as each, left or right.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - 1956-57 Buick/1950-51 Cadillac Wheel Cylinders
    Garage Sale
    Garage Sale - 1956-57 Buick/1950-51 Cadillac Wheel Cylinders
    (Part #9107536.GS)
    x
                
    • Material: Cast Iron
    • Inlet Thread Size: 7/16-20
    • Bleeder Screw Included: Yes
    • Bore: 1-1/8"
     
     
    These wheel cylinders are garage sale priced because they are different than what we currently offer.  See applications tab for exact applications.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    
  • Garage Sale - 11" x 2-1/4" Ford Brake Drums
    Garage Sale
    Garage Sale - 11" x 2-1/4" Ford Brake Drums
    (Part #UP41219)
    x
                

    This is garage sale priced because it was painted red.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     

    Fits New style Big Ford housing with 2-1/2" axle offset and 3.15" axle bearing. Drums drilled for 5 on 4-1/2" bolt pattern. 

  • Garage Sale - Bendix 151 Drum Brake Shoes, Half Set, Non Asbestos Organic
    Garage Sale
    Garage Sale - Bendix 151 Drum Brake Shoes, Half Set, Non Asbestos Organic
    (Part #910151.GS1)
    x
                

    Are your brakes worn out? If so, then you need to get some of these Bendix Brakes brake shoes. They are made from quality materials, so you know they'll last.

     

    • Dodge/Plymouth Rear
    • Ford/Mercury Rear

     

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - Complete 11" Backing Plates for 9" Ford
    Garage Sale
    Garage Sale - Complete 11" Backing Plates for 9" Ford
    (Part #UP25340)
    x
                We offer these rear drum brake kits for popular 9" Ford rear axles. Each kit has new backing plates, shoes, wheel cylinders, springs, emergency brake arm and hardware. 

     

    These are garage sale priced because they are missing the star adjusters.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Bendix 152 Rear Drum Brake Shoes, Graphite Metallic
    Garage Sale
    Garage Sale - Bendix 152 Rear Drum Brake Shoes, Graphite Metallic
    (Part #910152)
    x
                

    Are your brakes worn out? If so, then you need to get some of these Bendix Brakes brake shoes. They are made from quality materials, so you know they'll last.

     

    • Ford and Mercury 9 inch rear ends 

     

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS