Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Brakes At Speedway Motors

Speedway Motors is the #1 authority on disc brakes conversion kits. With the most experience in the Classic Pickup Truck business, you can be assured that you are getting a quality, excellent fitting kit. Insist on a Speedway front disc brake conversion kit for your classic truck. Don't forget to check out our huge selection of brake rotors, high volume master cylinders, proportioning valves and blocks. Stock up on all the essential brake lines, brake calipers, brake pads and fittings, too!

"Classic Truck, Disc Brake Upgrade Kits" Page 1 of 2

  • Deluxe Disc Brake Kit 1947-1959 Chevy Half-Ton Pickup
    Deluxe Disc Brake Kit 1947-1959 Chevy Half-Ton Pickup
    x
                

    Improve the stopping power of your 1947-1959 Chevy 1/2 ton pick-up without replacing the factory beam axle. Works with 15" or larger wheels with the GM 5-on-4.75" bolt pattern. Increases front track width 7/16" per side (7/8" total).

    Kit Includes:

    • 11" brake rotor, 5 x 4-3/4"
    • Brake pads
    • GM Caliper slide bolts
    • 1969-77 calipers (7/16"-20 inlets)
    • Brake brackets
    • Rubber Brake Lines
    • Hardware
    • Seals
    • Inner bearing cups
    • Inner bearing cones
    • Spacers
    • Outer bearing cones
    • Dust caps
    • Instructions

    910-31916 Instructions (PDF)

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31902 Instructions (PDF)

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM emergency brake calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31921 Instructions (PDF)

  • Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    x
                Upgrade your Mustang II based suspension from the stock 9-1/4" rotors to our 11" rotors with powerful single piston GM metric floating calipers. This simple bolt-on conversion requires no machining. For use on 1974-80 Pinto, Bobcat and Mustang II spindles.

    Features a 5 on 4-1/2" Ford/Mopar wheel bolt pattern (increases track width 1/2" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31944 Instructions (PDF)

  • 1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 5-1/2 Inch
    1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 5-1/2 Inch
    x
                

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups. No spindle modifications are required.

    Kit Includes:

    • Vented cast iron rotors
    • GM single piston calipers (7/16"-20 inlets)
    • Brake pads
    • Caliper slide bolts
    • Rubber brake lines
    • Steel caliper brackets
    • Hardware
    • New bearing and seal adapters
    • Seals
    • Inner bearing cones
    • Outer bearing cones
    • Spacers
    • Dust caps
  • Mustang II Complete 11 Inch Front Disc Brake Kit, 5 x 4-3/4 GM Bolt Pattern
    Mustang II Complete 11 Inch Front Disc Brake Kit, 5 x 4-3/4 GM Bolt Pattern
    x
                Easily upgrade your Mustang II based suspension from the stock 9-1/4" rotors to 11" rotors with powerful single piston GM midsize floating calipers. Kit requires no machining. For use on 1974-1980 Pinto, Bobcat and Mustang II factory spindles.  

    GM bolt pattern 5 on 4-3/4" (increases track width 1" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31943 Instructions (PDF)

  • Deluxe Disc Brake Kits: 1957-1964 Ford Half Ton
    Deluxe Disc Brake Kits: 1957-1964 Ford Half Ton
    x
                

    These kits allow you to put disc brakes on your 1957-64 Ford 1/2 ton pick-up.

    Kit Includes:

  • 11-3/4" brake rotor, 5 x 5-1/2"
  • Brake pads
  • GM Caliper slide bolts
  • Rubber Brake Lines
  • Rebuilt 1971-76 calipers (7/16"-20 inlets)
  • Brake brackets
  • Hardware
  • Seals
  • Inner bearing cups
  • Inner bearing cones
  • Spacers
  • Outer bearing cones
  • Dust caps
  • Instructions

    Instructions
  •  

     

  • Complete Disc Brake Kit 1937-48 Ford, 5 on 5-1/2 BC
    Complete Disc Brake Kit 1937-48 Ford, 5 on 5-1/2 BC
    x
                

    This complete disc brake kit easily installs big 11-3/4" rotors on your 1937-1948 Ford car or 1937-1947 Ford 1/2 ton pickup spindles while retaining the original 5 on 5-1/2" bolt circle.

    This kit will work with spindles having either original steering arms or with flat steel steering arms. It will NOT work with forged aftermarket steering arms. Wheels must have 3-7/16" center hole and have been designed for disc brake applications. Will NOT work with early Ford factory wire or steel drum brake wheels. You will need to use a later disc brake steel wheel or aftermarket wheel.

    910-31909 Instructions (PDF)

  • Mustang II Complete 11 Inch Front Disc Brake Kit, 5 on 4-3/4 Granada Type Rotor
    Mustang II Complete 11 Inch Front Disc Brake Kit, 5 on 4-3/4 Granada Type Rotor
    x
                Easily upgrade your Mustang II based suspension from the stock 9-1/4"  rotors to 11" rotors with powerful single piston GM Metric style floating  calipers. Kit requires no machining. For use on 1974-1980 Pinto, Bobcat  and Mustang II factory spindles.  
    • GM bolt pattern 5 on 4-3/4" (increases track width 1/2" per side)
    • Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers
    • Granada style rotors

    Front Disc Brake Installation Instructions (PDF)

  • 1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 4-1/2 Inch
    1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 4-1/2 Inch
    x
                

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups. No spindle modifications are required.

    Kit Includes:

    • Vented cast iron rotors
    • GM single piston calipers (7/16"-20 inlets)
    • Brake pads
    • Caliper slide bolts
    • Rubber brake lines
    • Steel caliper brackets
    • Hardware
    • New bearing and seal adapters
    • Seals
    • Inner bearing cones
    • Outer bearing cones
    • Spacers
    • Dust caps
  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Steel rotor hat mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31936 Instructions (PDF)

  • 1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    x
                

    This kit allows you to upgrade your 1963-1966 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 9" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.

    Only for 1/2 ton trucks 

  • Wilwood 140-7675 1964-74 GM Front Disc 12.19 Inch Big Brake Kit
    Wilwood 140-7675 1964-74 GM Front Disc 12.19 Inch Big Brake Kit
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    12.19" Big Brake Series features:

    • Forged 4-pistonDynalite Calipers - black finish
    • 12.19" diameter Ultralite HP 32 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Minimum wheel diameter of 16"

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-1407675 Instructions (PDF)

     

  • Garage Sale - Wilwood Hardware Kit For 1949-54 Chevy Spindles
    Garage Sale
    Garage Sale - Wilwood Hardware Kit For 1949-54 Chevy Spindles
    x
                

    Check out this complete brake package for '49-'54 Chevy car spindles. These kits feature aluminum hubs, vented iron rotors, bearings, seals and all necessary hardware. Hubs are drilled for both 5 x 4.5" and 5 x 4.75" bolt patterns.

     

    This hardware kit is garage sale priced because it has been partially test fit and returned.  What you see is what you get. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit
    GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This complete kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM metric style calipers, brake pads and hardware.

    • Rotors have both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • Fits axle with a maximum flange diameter of 6-1/4" O.D.
    • 2.780" rotor center hole
    • Does not fit all 10 & 12 bolt axles. Check Application tab for details. 

    Axle Flange Identification Chart (GIF)

    910-31919 Instructions (PDF)

  • Wilwood 140-2117-B Rear Brake Kit - Mopar/Dana Axle, 2.36 Offset
    Wilwood 140-2117-B Rear Brake Kit - Mopar/Dana Axle, 2.36 Offset
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popularMopar/Danarear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    • Ultralite HP 32 Curved Vane Vented Rotor - 12.19" x .810"
    • Forged billet Dynalite four-piston calipers
      • Piston Area (in²): 3
      • 1/8" NPT inlet
    • Minimum Wheel Diameter (in): 15
    • BP-10 Smart pads
    • Aluminum mounting brackets and hardware

    This kit will fit Mopar 8 3/4" and Dana 60 rear axlesequipped with green non-adjustable bearings (Mopar P/N RP400). These kits do not have emergency brake provisions.

    Wilwood Rear Brake Kit Installation Instructions (PDF)

    Axle Flange Identification Chart

    Exploded Installation Schematic

  • AFCO 7250-0200 Complete Rear Disc Brake Kit, 2-1/2 Inch Piston
    AFCO 7250-0200 Complete Rear Disc Brake Kit, 2-1/2 Inch Piston
    x
                Complete kit with standard GM metric calipers. Mounts vented rotors and calipers to 3" tube rearend. Complete with rotors, hats, calipers, brackets, brake pads and slide bolts. Hat fits 4-1/2", 4-3/4" and 5" bolt circle. 
            
  • AFCO 7250-0300 Basic Rear Disc Brake Kit
    AFCO 7250-0300 Basic Rear Disc Brake Kit
    x
                Kits for metric calipers. These basic kits include brackets, steel vented rotors, hats and bolts. Caliper brackets weld to 3" tube rearend. Hat fits 4-1/2", 4-3/4" and 5" bolt circle. 
            
  • Wilwood 140-10996 1964-74 GM Front Disc 11 Inch Pro Series Brake Kit
    Wilwood 140-10996 1964-74 GM Front Disc 11 Inch Pro Series Brake Kit
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    11.00" Pro Series Brakes feature:

    • Forged 4-pistonDynalite Calipers - black finish
    • 11.00" diameter Ultralite HP 30 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Provides plenty of clearance inside popular 15” wheels.

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-14010996 Instructions (PDF)

     

  • Wilwood 140-2118-B Rear Brake Kit - New Big Bearing Ford, 2.5 Offset
    Wilwood 140-2118-B Rear Brake Kit - New Big Bearing Ford, 2.5 Offset
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popular Ford big bearing rear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    These kits do not have emergency brake provisions.

    835-1402118 Instructions (PDF)

    Axle Flange Identification Chart

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31920 Instructions (PDF)

  • Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407143 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Garage Sale - 1960-87 Chevy C-10/15 Truck Disc Brake Kit
    Garage Sale
    Garage Sale - 1960-87 Chevy C-10/15 Truck Disc Brake Kit
    x
                

    This item is garage sale priced because there aren't any calipers.  Rotors are a 5 lug, 5x5 bolt pattern.

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS**

     

    Kit is designed to work with stock and dropped spindles.  5 on 5 lug pattern.  Includes rotors, dust shields, hoses, bearings and seals, dust caps, spindles nuts, and brake hose clips.

  • Garage Sale - Speedway Basic Brake Kit For 1955-57 Chevy Car
    Garage Sale
    Garage Sale - Speedway Basic Brake Kit For 1955-57 Chevy Car
    x
                Just what's needed to update your classic Chevy! Eliminate those archaic ball bearings and gain first class stopping power all at once. This kit will increase the total track width by 1-3/4". May not clear some 14" wheels. Uses 1969-72 GM Midsize calipers and rotors. Bolts on with no machine work necessary.  

    Kit Includes:

    • Brake caliper brackets
    • Hardware

    916-31915 Instructions (PDF)

     

    This kit is garage sale priced because it has been bolted on and returned. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Wilwood Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    Garage Sale
    Garage Sale - Wilwood Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    x
                Please view the product's page for more information
            
  • Wilwood 140-7140 Rear Disc Brake Kit, Big Ford 9 Inch New 2-1/2 Offset
    Wilwood 140-7140 Rear Disc Brake Kit, Big Ford 9 Inch New 2-1/2 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407140 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts.

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31932 Instructions (PDF)

  • GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit w/ E-Brake
    GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit w/ E-Brake
    x
                

    If you don't want to spend and arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes two bolt-on caliper brackets, two 11-5/8" vented rotors, two GM emergency brake calipers, brake pads and hardware.

    • 5 on 4-3/4" bolt circle
    • Fits over an axle with a maximum flange diameter of 6" O.D.
    • 2.872" rotor center hole
    • Requires the use of 16" wheels as this kit has a minimum 14-5/8" I.D. for caliper clearance 

    910-31928 Instructions (PDF)

  • Garage Sale - Wilwood Rear Brake Kit - Mopar/Dana Axle, 2.36 Offset
    Garage Sale
    Garage Sale - Wilwood Rear Brake Kit - Mopar/Dana Axle, 2.36 Offset
    x
                Please view the product's page for more information
            
  • Wilwood 140-2113-B Rear Brake Kit - Small Bearing Ford, 2.66 Offset
    Wilwood 140-2113-B Rear Brake Kit - Small Bearing Ford, 2.66 Offset
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popularFordsmall bearingrear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    These kits do not have emergency brake provisions.

    835-1402113 Instructions (PDF)

    Axle Flange Identification Chart

     

    Click Here for Exploded Installation Schematic

     

  • Wilwood 140-7141 Rear E-Brake Kit - GM 12 Bolt Axle
    Wilwood 140-7141 Rear E-Brake Kit - GM 12 Bolt Axle
    x
                

    Wilwood'sFDL Pro-Series rear disc kits provide a complete solution for popular GM 12-boltrear axles that require a parking brake. Forged billet Dynalite four piston calipers, 12.19” one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking.

    E-brake cables sold separately. Fits GM 12-bolts with 2.81" offset and OE C-Clip axles. Does not support Special End or C-Clip Eliminator modifications.

    835-1407141 Instructions (PDF)

    Axle Flange Identification Chart

     

     

    Click Here for Exploded Installation Specs

     

  • Garage Sale - 1963-66 Chevy Pickup Front Disc Brake Conversion Kit
    Garage Sale
    Garage Sale - 1963-66 Chevy Pickup Front Disc Brake Conversion Kit
    x
                

    This kit is garage sale priced because it does not include the booster, master cylinder, most of the mounting hardware or prop valve.  One of the rotors has 2 studs broken off and the other is missing a stud.  What you see is what you get. 

      NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    This kit allows you to upgrade your 1963-1966 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, seals and banjo bolts.

     

     

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Steel hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31931 Instructions (PDF)

  • GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit
    GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit
    x
                

    If you don't want to spend and arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes two bolt-on caliper brackets, two 11-5/8" vented rotors, two GM metric style calipers, brake pads and hardware.

    • 5 on 4-3/4" bolt circle
    • Fits over an axle with a maximum flange diameter of 6" O.D.
    • 2.872" rotor center hole
    • Requires a minimum 14-5/8" I.D. for caliper clearance 

    910-31923 Instructions (PDF)

  • Wilwood 140-2115B Rear Brake Kit - Old Big Bearing Ford, 2.36 Offset
    Wilwood 140-2115B Rear Brake Kit - Old Big Bearing Ford, 2.36 Offset
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popularFord big bearingrear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    • Piston Area (in²): 3
    • 1/8" NPT inlet
    • Minimum Wheel Diameter (in): 15
    • BP-10 Smart pads

    These kits do not have emergency brake provisions.

    Pro Series Rear Axle Kit Installation Instructions (PDF)

    Axle Flange Identification Chart

    Exploded Installation Schematic

     

  • Garage Sale - 1968-74 Nova Dropped Spindle Brake Kit, Pass Side Only, No Caliper
    Garage Sale
    Garage Sale - 1968-74 Nova Dropped Spindle Brake Kit, Pass Side Only, No Caliper
    x
                

    This brake kit is garage sale priced because it is the passenger side only.  What you see is what you get.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    Disc brake conversion kit for 1964-74 GM A-F-X cars using dropped spindles.

    This kit includes aluminum hubs, 11" x 1" drilled and slotted rotors,  caliper brackets, bearings, seals and dust cap.

    The bolt pattern is the common 5 on 4 3/4" GM.

    This is a bolt-on kit. No adapters to press-on the spindle.

  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Wilwood aluminum hats fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31935 Instructions (PDF)

  • Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" NPT inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407139 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Garage Sale - Ford Racing Rear Disc Kit w/ E-Brake
    Garage Sale
    Garage Sale - Ford Racing Rear Disc Kit w/ E-Brake
    x
                

    Looking for a low cost way to add rear disc brakes to your Ford  8.8" or 9" equipped hot rod, without searching the junk yards? Look no further. This Ford Racing rear disc brake kit includes OE quality single-piston calipers, 11.8" vented rotors, E-coated caliper mounting bracket, and all mounting components. Plus, the E-coated backing plate features an integral parking brake for a convenient install.

    Kit is designed for the late model Ford 8.8" truck and 9" (New Style Big Ford housing with 3.15 bearings, 2.5" offset) rear axles. Will NOT work with Mustang 8.8" axle.

    Rotors are drilled for 5 on 4-1/2" bolt pattern. See Notes tab for important install info.

    Will Not Work On 15" or 16" Wheels.

    Axle Flange ID Chart

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • AFCO 7250-0210 Complete Rear Disc Brake Kit, 2-3/4 Piston
    AFCO 7250-0210 Complete Rear Disc Brake Kit, 2-3/4 Piston
    x
                Complete kit with oversized GM metric calipers. Mounts vented rotors and calipers to 3" tube rearend. Complete with rotors, hats, calipers, brackets, brake pads and slide bolts. Hat fits 4-1/2", 4-3/4" and 5" bolt circle. 
            
Goto Previous PagePrevious Page
1 2