Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck Drivetrain At Speedway Motors

Speedway Motors is the classic truck enthusiasts source for pickup truck drivetrain components at everyday low prices! Select from a large assortment of slip yokes and ring & pinions to fit any need. Plus, you can find an assortment of gears and clutch hydraulic throwout bearings to fit your application, all in one stop. Speedway also has a great selection of classic truck rear end overhaul kits and accessories, too – from gears, axles and slip yokes to bearings and brackets. We can even set you up with a complete Ford 9'' or a quickchange rear end!

"Classic Truck, Differential Ring and Pinions" Page 1 of 1

  • Garage Sale - 1955-64 GM 8.2 Inch Axle Ring and Pinion Set, 5.13:1 Ratio
    Garage Sale
    Garage Sale - 1955-64 GM 8.2 Inch Axle Ring and Pinion Set, 5.13:1 Ratio
    SKU-919107I.GS2
    x
                

    This item is garage sale priced because it has been discontinued.  The brown color on the ring and pinion appear to be a paint applied at the factory to check the gear pattern and not surface rust.

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS** 

     

    Fits 1955-64 GM 8.2" rear axle.  5.13:1 ratio.

  • GM 10 Bolt Ring and Pinion Instal Kit, 8.5 R&P, 30 Spline
    GM 10 Bolt Ring and Pinion Instal Kit, 8.5 R&P, 30 Spline
    SKU-919831021
    x
                Everything you need for a complete ring and pinion installation job. 

    Kit Includes:

    • cover gasket
    • crush sleeve
    • marking compound and brush
    • pinion and carrier bearings
    • pinion nut and washer
    • pinion seal
    • thread locking compound
    • sealer

    Note: Pinion-depth shims are not included. 

  • Garage Sale - 9 Inch Ford Ring & Pinion, 4.86 Gear Ratio
    Garage Sale
    Garage Sale - 9 Inch Ford Ring & Pinion, 4.86 Gear Ratio
    SKU-UP45386
    x
                

    This ring and pinion is garage sale priced because it has been bolted in and returned.   

      NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle.

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF) 

  • Garage Sale - Ford 8.8 Inch Ring and Pinion Gears, 355 Ratio
    Garage Sale
    Garage Sale - Ford 8.8 Inch Ring and Pinion Gears, 355 Ratio
    SKU-UP16686
    x
                

    "Pro" brand gears offer excellent quality at a great price!  We offer a terrific selection of ratios for your 8.8" Ford rear axle.

     

    This gear set is garage sale priced because it appears to have been installed and returned, and we don't usually offer an 8.8" ring and pinion.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • 9 Inch Ford Ring & Pinion, 4.56 Gear Ratio
    $159.99
    $169.99
    Product Rating: 4.00 Stars
    9 Inch Ford Ring & Pinion, 4.56 Gear Ratio
    SKU-91919457
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 6.33 Gear Ratio
    $159.99
    $169.99
    9 Inch Ford Ring & Pinion, 6.33 Gear Ratio
    SKU-91919633
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 5.14 Gear Ratio
    $159.99
    $169.99
    9 Inch Ford Ring & Pinion, 5.14 Gear Ratio
    SKU-91919514
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • Garage Sale - Loaded Halibrand V8 Ring And Pinion, 3.54:1
    Garage Sale
    Garage Sale - Loaded Halibrand V8 Ring And Pinion, 3.54:1
    SKU-UP18606
    x
                

    Highest quality replacement gear set made. Fits all 6-spline Halibrand V8 quick changes. Available loaded with bearings.

     

    This ring and pinion is garage sale priced because the bearings have been packed and it has been test fit. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS


     

  • 9 Inch Ford Ring & Pinion, 4.86 Gear Ratio
    $159.99
    $169.99
    9 Inch Ford Ring & Pinion, 4.86 Gear Ratio
    SKU-91919486
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 3.50 Gear Ratio
    9 Inch Ford Ring & Pinion, 3.50 Gear Ratio
    SKU-91919350
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 1935-48 Ford/Mercury High Torque Ring and Pinion Gear Set, 6.17 Gear
    1935-48 Ford/Mercury High Torque Ring and Pinion Gear Set, 6.17 Gear
    SKU-919107J
    x
                These fit 1935-1948 passenger cars or 1935-1941 Ford 1/2 ton pick-ups (no 3/4 ton or larger). All gear sets are direct replacements for stock, non-quickchange rear axles. 6-spline input. 

    Installation Instructions  (PDF)

  • Garage Sale - 1935-1948 Ford/Mercury High Speed Ring and Pinion Gear Set, 5.86 Gear Ratio
    Garage Sale
    Garage Sale - 1935-1948 Ford/Mercury High Speed Ring and Pinion Gear Set, 5.86 Gear Ratio
    SKU-9109107I.GS
    x
                

    This item is garage sale priced because it's old stock.  5.86 ratio

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS**

     

    These fit 1935-1948 passenger cars or 1935-1941 Ford 1/2 ton pick-ups (no 3/4 ton or larger). All gear sets are direct replacements for stock, non-quickchange rear axles. 6-spline input.

    Installation Instructions  (PDF) 

  • 1935-48 Ford/Mercury High Torque Ring and Pinion Gear Set, 5.86 Gear
    1935-48 Ford/Mercury High Torque Ring and Pinion Gear Set, 5.86 Gear
    SKU-919107I
    x
                These fit 1935-1948 passenger cars or 1935-1941 Ford 1/2 ton pickups (not 3/4 ton or larger). All gear sets are direct replacements for stock, non-quickchange Ford banjo rear axles. 6-spline input. 

    Installation Instructions  (PDF)

  • Garage Sale - 1941-52 Ford 3/4 Ton Ring And Pinion, 4.87:1 Ratio
    Garage Sale
    Garage Sale - 1941-52 Ford 3/4 Ton Ring And Pinion, 4.87:1 Ratio
    SKU-91900487
    x
                

    These gears are garage sale priced because we no longer offer them.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - GM 10 Bolt Ring & Pinion Instal Kit, 8.5
    Garage Sale
    Garage Sale - GM 10 Bolt Ring & Pinion Instal Kit, 8.5
    SKU-UP33233
    x
                Kit Includes:
    • cover gasket
    • marking compound and brush
    • carrier bearings
    • pinion seal
    • thread locking compound
    • sealer
    Note: Pinion-depth shims are not included.  
     
    This is Garage Sale priced because it does not include a crush sleeve or large pinion bearing.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  
  • 9 Inch Ford Ring & Pinion, 4.11 Gear Ratio
    9 Inch Ford Ring & Pinion, 4.11 Gear Ratio
    SKU-91919411
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 6.20 Gear Ratio
    $159.99
    $169.99
    9 Inch Ford Ring & Pinion, 6.20 Gear Ratio
    SKU-91919620
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • Motive Gear Ford 9 Inch Performance Ring and Pinion, 1957 - Up Style
    Motive Gear Ford 9 Inch Performance Ring and Pinion, 1957 - Up Style
    SKU-919194
    x
                

    Motive Gear 9" Performance Style 1957 & Up ring and pinion gear sets are quality assured and tested to take a beating in your aluminum or steel housing.  Computer-controlled heat treatment, index tooth spacing, and CNC machining all go into this series of performance gear sets. 

    • 10 Bolt 3rd member
    • Aluminum or steel housing
    • Ring gear diameter 9"
    • 10-7/16" x 20 RH threaded bolts
    • Pinion diameter 1.313" 28 splines
    • No case breaks
    • 8620 Material - Heat Treated
    • Choose your ratio

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Motive Gear Performance Ring and Pinion Chart (GIF)   

  • 9 Inch Ford Ring & Pinion, 5.83 Gear Ratio
    $159.99
    $169.99
    9 Inch Ford Ring & Pinion, 5.83 Gear Ratio
    SKU-91919583
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • Garage Sale - Ford 8.8 Inch Ring And Pinion Gears
    Garage Sale
    Garage Sale - Ford 8.8 Inch Ring And Pinion Gears
    SKU-UP4658
    x
                

    "Pro" brand gears offer excellent quality at a great price!  We offer a terrific selection of ratios for your 8.8" Ford rear axle.

     

    This gear set is garage sale priced because it appears to have been installed and returned, and we don't usually offer an 8.8" ring and pinion.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - 9 Inch Ford Ring & Pinion, 3.70 Gear Ratio
    Garage Sale
    Garage Sale - 9 Inch Ford Ring & Pinion, 3.70 Gear Ratio
    SKU-UP48827
    x
                

    This ring and pinion is garage sale priced because it has been installed and returned. 

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle.

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 1935-1948 Ford/Mercury High Speed Ring and Pinion Gear Set, 3.78 Gear
    1935-1948 Ford/Mercury High Speed Ring and Pinion Gear Set, 3.78 Gear
    SKU-919107E
    x
                These fit 1935-1948 passenger cars or 1935-1941 Ford 1/2 ton pickups (not 3/4 ton or larger). All gear sets are direct replacements for stock, non-quickchange Ford banjo rear axles. 6-spline input. 

    Installation Instructions  (PDF)

  • 9 Inch Ford Ring & Pinion, 5.43 Gear Ratio
    $159.99
    $169.99
    9 Inch Ford Ring & Pinion, 5.43 Gear Ratio
    SKU-91919543
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • Garage Sale - 7-1/2 Inch Ford Ring & Pinion, 410 Ratio
    Garage Sale
    Garage Sale - 7-1/2 Inch Ford Ring & Pinion, 410 Ratio
    SKU-UP41524
    x
                

    This ring and pinion is garage sale priced because the pinion gear appears to have been installed and returned.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    For your Pony car/Mini stock.  Don't forget the cross pin and bearing kit.

  • 9 Inch Ford Ring & Pinion, 5.00 Gear Ratio
    $159.99
    $169.99
    9 Inch Ford Ring & Pinion, 5.00 Gear Ratio
    SKU-91919500
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 3.70 Gear Ratio
    9 Inch Ford Ring & Pinion, 3.70 Gear Ratio
    SKU-91919370
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 4.71 Gear Ratio
    $159.99
    $169.99
    9 Inch Ford Ring & Pinion, 4.71 Gear Ratio
    SKU-91919471
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 5.67 Gear Ratio
    $159.99
    $169.99
    Product Rating: 5.00 Stars
    9 Inch Ford Ring & Pinion, 5.67 Gear Ratio
    SKU-91919567
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • Garage Sale - 1955-64 GM 8.2 Inch Axle Ring and Pinion Set, 4.56:1 Ratio
    Garage Sale
    Garage Sale - 1955-64 GM 8.2 Inch Axle Ring and Pinion Set, 4.56:1 Ratio
    SKU-919107I.GS3
    x
                Please view the product's page for more information
            
  • Garage Sale - 1970-96 GM 10 Bolt 8-1/2 Inch Ring And Pinion, 308 Ratio
    Garage Sale
    Garage Sale - 1970-96 GM 10 Bolt 8-1/2 Inch Ring And Pinion, 308 Ratio
    SKU-UP18870
    x
                

    Note: When replacing a stock 2.56 (or numerically lower) ratio, the carrier must also be replaced with a 2.73 or higher ratio's carrier to compensate for the difference in ring gear thickness.

     

    This ring and pinion is garage sale priced because it has been bolted on and returned. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS


     

  • 1935-1948 Ford/Mercury High Speed Ring and Pinion Gear Set, 3.54 Gear
    1935-1948 Ford/Mercury High Speed Ring and Pinion Gear Set, 3.54 Gear
    SKU-919107D
    x
                

    These ring & pinion sets fit 1935-1948 passenger cars or 1935-1941 Ford 1/2 ton pick-ups (no 3/4 ton or larger). All gear sets are direct replacements for stock, non-quickchange Ford banjo rear axles. 6-spline input.

    • Fits 1935-48 Passenger Cars or 1935-41 Ford 1/2 ton pickups
    • Does not fit 3/4 ton or larger
    • Stock (non-quick change)
    • All gear sets are direct replacements
    • Six spline input
    • 3.54 gear ratio

    Installation Instructions  (PDF)

  • 1935-1948 Ford/Mercury High Speed Ring and Pinion Gear Set, 3.25 Gear
    1935-1948 Ford/Mercury High Speed Ring and Pinion Gear Set, 3.25 Gear
    SKU-919107F
    x
                

    These fit 1935-1948 passenger cars or 1935-1941 Ford 1/2 ton pickups (not 3/4 ton or larger). All gear sets are direct replacements for stock, non-quickchange Ford banjo rear axles. 6-spline input.

    • Fits 1935-48 Passenger Cars or 1935-41 Ford 1/2 ton pickups
    • Does not fit 3/4 ton or larger
    • Stock (non-quick change)
    • All gear sets are direct replacements
    • Six spline input
    • 3.25:1 gear ratio

    Installation Instructions  (PDF)

  • 9 Inch Ford Ring & Pinion, 3.89 Gear Ratio
    9 Inch Ford Ring & Pinion, 3.89 Gear Ratio
    SKU-91919389
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 6.00 Gear Ratio
    $159.99
    $169.99
    Product Rating: 5.00 Stars
    9 Inch Ford Ring & Pinion, 6.00 Gear Ratio
    SKU-91919600
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 1970-96 GM 10 Bolt 8 1/2 Inch Ring and Pinion
    1970-96 GM 10 Bolt 8 1/2 Inch Ring and Pinion
    SKU-91910
    x
                

    Many ratios to choose from.

    • 8.50" diameter ring gear
    • 1.625" diameter pinion
    • 10 ring gear bolts
    • 10 cover bolts
    • 30 pinion splines
    • Uses LH thread ring gear bolts - 7/16"-20

    Note: When replacing a stock 2.56 (or numerically lower) ratio, the carrier must also be replaced with a 2.73 or higher ratio's carrier to compensate for the difference in ring gear thickness.

  • 9 Inch Ford Ring & Pinion, 5.29 Gear Ratio
    $159.99
    $169.99
    9 Inch Ford Ring & Pinion, 5.29 Gear Ratio
    SKU-91919529
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • GM 10 Bolt 7.5 Inch Ring and Pinion
    From: $149.99
    Product Rating: 4.00 Stars
    GM 10 Bolt 7.5 Inch Ring and Pinion
    SKU-91913
    x
                

    IMPORTANT NOTE: Ring & Pinion  ratios are designed for use with a "3 series" carrier. If you intend to install these ratios with a "2 series" carrier, you need to use ring gear spacer #910-48305.

    • 7.50" diameter ring gear
    • 1.438" diameter pinion
    • 27 splines
  • Garage Sale - 1970-96 GM 10 Bolt 8-1/2" Ring and Pinion - 308 Ratio
    Garage Sale
    Garage Sale - 1970-96 GM 10 Bolt 8-1/2" Ring and Pinion - 308 Ratio
    SKU-UP14011
    x
                

    Note: When replacing stock 2.56 and numerically lower, the carrier must be replaced with a carrier of 2.73 or higher.

     

    This ring & pinion is garage sale priced because it has been installed.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - AFCO 9 Inch Ford Ring And Pinion, 4.71 Ratio
    Garage Sale
    Garage Sale - AFCO 9 Inch Ford Ring And Pinion, 4.71 Ratio
    SKU-AUP2032
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle.

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

     

    These ring and pinions are garage sale priced because they are new old stock. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS