Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 2

Products

Crate Engines

Shop Classic Truck Engines At Speedway Motors

Speedway Motors has high performance classic truck engine parts at everyday low prices. Whether you are building a Small Block Chevy or Ford Flathead, Speedway has you covered with thousands of parts in stock, ready to ship. With everything from pison sets to camshafts, Speedway can feed your need for speed! Complete classic pickup truck crate engines of multiple sizes, like Chevy 305, 350, 383 and others, are available at great prices! We also have a large selection of cylinder heads, crankshafts and roller rocker arms, so make Speedway your classic truck performance engine solution.


Featured Products
  • BluePrint 383 Small Block Chevy Crate Engine
    BluePrint 383 Small Block Chevy Crate Engine
    (Part #91532383)
    x
                

    This 383 Chevy "Stroker" motor is a Speedway Exclusive! Machined and assembled at BluePrint Engines, each Small Block Chevy engine is dyno tested (includes individual dyno sheet) and comes with a 30 month/50,000 mile warranty. Each crate engine is built to crank out 420 hp @ 5200 rpm and 450 ft.-lbs. @ 4300 rpm.

    Dyno Sheet (PDF)  (Note: This sheet represents one example engine. Your individual engine may differ slightly.) 

    • 420 hp @ 5200 rpm
    • 450 ft.-lbs. @ 4300 rpm
    • 4-bolt main, 1-piece rear main seal seasoned block 
    • Passenger side dipstick
    • Chrome valve covers and timing cover
    • New plain steel oil pan
    • New cast steel crankshaft
    • Rotating assembly balanced to within 2 grams
    • Harmonic balancer
    • 153 tooth flexplate
    • Hypereutectic pistons
    • 10:1 compression
    • Hydraulic flat tappet cam
    • Heavy duty double roller timing set
    • Performance aluminum cylinder heads
    • Hardened retainers and performance valve springs
    • Aluminum dual plane intake
    • New HEI distributor
    • 2500 stall converter recommended
    Crate Engine Installation Guide

    Truck Freight Shipping Charges Apply - click here for details.

  • BluePrint 302 Ford Hot Rod Crate Engine w/ Front Sump Pan
    BluePrint 302 Ford Hot Rod Crate Engine w/ Front Sump Pan
    (Part #9153200)
    x
                

    Need a new engine for your Blue Oval ride? This Speedway exclusive crate motor will work great in your street rod or classic pickup truck. Machined and assembled at BluePrint Engines, each engine is dyno tested and includes the dyno sheet. Has a 30 month/50,000 mile manufacturer's warranty.

    Dyno Sheet (PDF)  (Note: This sheet represents one example engine. Your individual engine may differ slightly.) 

    • 300+ Horsepower @ 5300
    • 320+ ft lbs @ 3800
    • Hand picked .040" over seasoned block
    • Squared and parallel decked
    • Align honed main bearing bore
    • Cylinders computer honed to within .0002"
    • Cylinders sonic tested
    • Brass freeze plugs
    • 9.6-1 compression ratio
    • Premium cast 2MAE crankshaft - ground 10/10
    • Balanced rotating assembly
    • Harmonic balancer
    • Melling hi-volume oil pump
    • Chrome front sump oil pain
    • Hyd. Roller camshaft .543 int./.554 exh. lift, 218 int./226 exh. duration @ .050, 112° lobe separation
    • H.D. double roller timing chain
    • Timing cover w/ dipstick hole
    • Modified Ford E7TE cast iron heads
    • 1.94" swirl polished intake valves
    • 1.60" swirl polished exhaust valves
    • Hardened retainers and springs
    • Hardened pushrods
    • Finned aluminum valve covers and breathers
    • Polished aluminum dual plane 4bbl intake manifold
    • Distributor installed and timing set
    • Automatic transmission 157 tooth flexplate included (not installed)

    Learn more about these crate engines by reading our article, "Building a Better SBF" as featured in Custom Classic Trucks Magazine.

    Crate Engine Installation Guide (PDF)

    Truck Freight Shipping Charges Apply - click here for details.
  • BluePrint Budget 350 Crate Engine
    $2,699.99
    $2,799.98
    BluePrint Budget 350 Crate Engine
    (Part #91532355)
    x
                
    • 325 hp @ 5400 rpm
    • 360 ft.-lbs. @ 3900 rpm
    • 4-bolt main, 1-piece rear main seal
    • Passenger side dipstick
    • Align honed main bearing bore
    • Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    • Cylinders are sonic tested for thickness
    • BluePrint premium cast iron crankshaft
    • Hypereutectic pistons
    • Chevy heavy beam rods with 150,000 PSI bolts
    • Aluminum dual plane intake
    • Hydraulic flat tappet cam
    • .480 intake / .486 exhaust & 229 intake / 230 exhaust duration @.050
    • Heavy duty double roller timing set
    • BluePrint premium center bolt cast iron
    • Hardened retainers and springs
    • 2.02 swirl polished intake valves
    • 1.60 swirl polished exhaust valves
    • 9.5 to 1 compression
    • New valve covers, oil pan and timing cover
    • Brass freeze plugs
    • New HEI distributor
  • BluePrint 383 Small Block Chevy Roller Crate Engine
    BluePrint 383 Small Block Chevy Roller Crate Engine
    (Part #91533383)
    x
                

    This 383 Chevy "Stroker" motor is a Speedway Exclusive! Machined and assembled at BluePrint Engines, each engine is dyno tested (includes individual dyno sheet) and comes with a 30 month/50,000 mile warranty. Each crate engine is built to crank out 430 hp @ 5200 rpm and 450 ft.-lbs. @ 4300 rpm.

    • 430 hp @ 5200 rpm
    • 450 ft.-lbs. @ 4300 rpm
    • Bore x Stroke: 4.040" x 3.75"
    • 4-bolt main, 1-piece rear main seal seasoned block
    • Passenger side dipstick
    • Brass freeze plugs
    • Chrome valve covers and timing cover
    • New plain steel oil pan
    • New cast steel crankshaft
    • Rotating assembly balanced to within 2 grams
    • Heavy beam connecting rods with 150,000 psi bolts
    • Harmonic balancer
    • 153 tooth flexplate
    • Hypereutectic pistons
    • 10:1 compression
    • Hydraulic roller camshaft
    • Heavy duty double roller timing set
    • Aluminum 1.5:1 ratio roller rocker arms
    • Performance aluminum cylinder heads
    • Hardened retainers and performance valve springs
    • Aluminum dual plane intake
    • New HEI distributor
    • 91 Octane recommended fuel
    • 2500 stall converter recommended

    Crate Engine Installation Guide

    Truck Freight Shipping Charges Apply - click here for details.

  • BluePrint 302 Ford Hot Rod Crate Engine w/ Rear Sump Pan
    BluePrint 302 Ford Hot Rod Crate Engine w/ Rear Sump Pan
    (Part #9153210)
    x
                

    Need a new engine for your Blue Oval ride? This Speedway exclusive crate motor will work great in your street rod or classic pickup truck. Machined and assembled at BluePrint Engines, each engine is dyno tested and includes the dyno sheet. Has a 30 month/50,000 mile manufacturer's warranty.

    Dyno Sheet (PDF)  (Note: This sheet represents one example engine. Your individual engine may differ slightly.) 

    • 300+ Horsepower @ 5300
    • 320+ ft lbs @ 3800
    • Hand picked .040" over seasoned block
    • Squared and parallel decked
    • Align honed main bearing bore
    • Cylinders computer honed to within .0002"
    • Cylinders sonic tested
    • Brass freeze plugs
    • 9.6-1 compression ratio
    • Premium cast 2MAE crankshaft - ground 10/10
    • Balanced rotating assembly
    • Harmonic balancer
    • Melling hi-volume oil pump
    • Steel rear sump oil pan
    • Hyd. Roller camshaft .543 int./.554 exh. lift, 218 int./226 exh. duration @ .050, 112° lobe separation
    • H.D. double roller timing chain
    • Timing cover w/ dipstick hole
    • Modified Ford E7TE cast iron heads
    • 1.94" swirl polished intake valves
    • 1.60" swirl polished exhaust valves
    • Hardened retainers and springs
    • Hardened pushrods
    • Finned aluminum valve covers and breathers
    • Polished aluminum dual plane 4bbl intake manifold
    • Distributor installed and timing set
    • Automatic transmission 157 tooth flexplate included (not installed)

    Learn more about these crate engines by reading our article, "Building a Better SBF" as featured in Custom Classic Trucks Magazine.

    Crate Engine Installation Guide (PDF)

    Truck Freight Shipping Charges Apply - click here for details.
  • BluePrint 496 Big Block Chevy Crate Engine
    BluePrint 496 Big Block Chevy Crate Engine
    (Part #91532496)
    x
                

    This 496 B/B Chevy motor is a Speedway Exclusive! Machined and assembled at BluePrint Engines, each engine is dyno tested (includes individual dyno sheet) and comes with a 30 month/50,000 mile warranty. Each crate engine is built to crank out 480 hp @ 5200 rpm and 550 ft.-lbs. @ 4000 rpm. 

    • 480 hp @ 5200 rpm
    • 550 ft.-lbs. @ 4000 rpm
    • 4 bolt main .060" over block
    • Two piece rear seal, passenger side dipstick
    • New cast steel crankshaft externally balanced, 4.250" stroke
    • New 4340 forged connecting rods
    • Hypereutectic flat top pistons
    • 9:1 compression ratio
    • Rotating assembly balanced to within 2 grams
    • New 168 tooth flexplate
    • Chrome valve covers and timing cover
    • Power + Crosswind dual plane aluminum intake manifold
    • Melling high volume oil pump
    • GM cast iron oval port heads
    • Screw-in studs and guide plates
    • Hardened retainers and performance valve springs
    • Hydraulic flat tappet camshaft
    • New HEI distributor
    • 2500 stall converter recommended
    Crate Engine Installation Guide

    Truck Freight Shipping Charges Apply - click here for details.

  • GM Performance 12499529 Small Block Chevy 350/290 Long Block Engine
    GM Performance 12499529 Small Block Chevy 350/290 Long Block Engine
    (Part #35512499529)
    x
                

    Drop some performance into your Street Rod, Muscle Car or Truck with these genuine GM Performance engines! All GM Performance engines include a 24 Month 50,000 mile warranty. GM Performance Parts believes that everyone should be able to afford a high quality GM V-8 without going broke. The 350/290 is an answer to those car crafters who demand maximum return on their money. But, just because it's affordable, dont think that it's a stone. The 350/290 delivers 290 hp @ 5100 rpm and a solid 326 lb.-ft. of torque at 3750 rpm. With those kinds of numbers, it's the perfect replacement engine for the millions of GM vehicles that shipped with a small-block. Got a tired, old Chevy that needs a lift? This is the crate engine for you. It is loaded with a four-bolt main bearing block, aluminum pistons, and a hydraulic camshaft. The cast iron cylinder heads are designed to be extremely durable while still providing good airflow through the engine. The 350/290 will ship to you as a Base-level long block. Add an intake manifold, carburetor, ignition system, starter, balancer, and water pump, and you'll be ready to hit the road with a fresh new motor.

    • Economical power
    • Four-bolt block
    • 290 hp @ 5100 rpm
    • 326 lb.-ft. of torque at 3750 rpm
    • 4.00" x 3.48" Bore x Stroke
    • 8.5:1 compression ratio
    • 87 Octane recommended fuel
    • 4-bolt main caps
    • Provisions for both RH and LH oil dipstick
    • Contain a 2-piece rear main seal
    • .450" intake / .460" exhaust - cam lift
    • Cam duration @ .050": 222° intake / 222° exhaust
    • 112° lobe separation
    • .194" intake / 1.50" exhaust valves
    • 1.5:1 ratio rocker arms
    • Add an intake manifold, carburetor, ignition system, starter, balancer, and water pump
    • The best value crate engine in the GM Performance Parts lineup

    Includes:

    • Fully assembled long block
    • Stamped steel OE valve covers
    • Oil pump, pick-up, and oil pan
    • Front timing cover
    • 6" and 8" timing pointers for use with 2:00 mark balancers

    Note: Block is drilled for either side oil dipsticks.  Plugs are included to seal unused tube hole.

     
  • GM Performance 19210009 Small Block Chevy 350 HO Turn-Key Crate Engine
    GM Performance 19210009 Small Block Chevy 350 HO Turn-Key Crate Engine
    (Part #35519210009)
    x
                

    Drop some performance into your Street Rod, Muscle Car or Truck with these genuine GM Performance engines! All GM Performance engines include a 24 Month 50,000 mile warranty. These 350 HO Turn-Key crate engines are packed with all the features you need to get a reliable 330 horsepower and 380 lb.-ft. of torque from a dependable, time-tested combination of GM Performance Parts. Of course, all of the components used in this engine are brand new – not remanufactured parts.  The 350 HO Turn-Key is a great choice for your small-block crate engine needs, based on a tough, Chevy four-bolt block that holds a strong nodular iron crankshaft, good rods, and aluminum pistons. The high-lift camshaft gives the engine its own unique, aggressive idle. The cam is based on the same one found in 1965-67 Corvette 327 engines, but it has even more lift and duration. Complete from top to bottom, the 350 HO comes pre-assembled with the intake manifold, carburetor, water pump, and distributor. With the Turn-Key trim level, you also get everything you need for a complete, running engine right out of the crate. We ship it with an accessory drive package, fuel pump, starter, and spark plug wires included in the package (not installed). The 350 HO Turn-Key crate engine offers you an incredible performance value – all you need to do is add the fuel and enjoy!

    • Complete from top to bottom
    • Four-bolt block
    • 330 HP @ 5000 RPM
    • 380 ft.lbs. of torque @ 3800 RPM
    • 4.00" x 3.48" bore x stroke
    • 9.1:1 compression
    • 92 octane recommended fuel
    • Cam lift: .435" intake / .460" exhaust
    • Lobe separation: 112.5°
    • 1.5:1 ratio stamped rocker arms
    • Nodular iron crankshaft, good rods, and aluminum pistons
    • Ships with an accessory drive package, fuel pump, starter, and spark plug wires (not installed)  
    • 24 Month 50,000 mile warranty

    Includes:

    • Fully assembled long block
    • Chrome steel valve covers with Chevy Bowtie logo
    • Chrome 14" air cleaner
    • Oil pump, pick-up, oil pan
    • Aluminum intake manifold
    • Holley 670cfm carburetor
    • HEI distributor, plug wires, looms, spark plugs 
    • 12-3/4" automatic transmission flexplate
    • 8" harmonic balancer
    • Front timing cover
    • Heavy duty starter w/bolts
    • Oil filter and adapter
    • Serpentine drive system with air conditioning (included but not installed)
    • Passenger side RH oil dipstick and tube
     
     
     
     
    19210008 Installation Guide 3 (PDF)

Filter

"Classic Truck, Crate Engines" Page 1 of 2

Page 1 of 2

  • GM Performance 19244450 Small Block Chevy 350/290 Deluxe Crate Engine
    GM Performance 19244450 Small Block Chevy 350/290 Deluxe Crate Engine
    (Part #35519244450)
    x
                Please view the product's page for more information
            
  • GM Performance 19210009 Small Block Chevy 350 HO Turn-Key Crate Engine
    GM Performance 19210009 Small Block Chevy 350 HO Turn-Key Crate Engine
    (Part #35519210009)
    x
                Please view the product's page for more information
            
  • Blueprint BP3830CT1 383 Small Block Chevy Vortec Head Crate Engine
    Blueprint BP3830CT1 383 Small Block Chevy Vortec Head Crate Engine
    (Part #91531383)
    x
                Please view the product's page for more information
            
  • BluePrint Roller 496 B/B Chevy Engine
    $6,999.99
    $7,499.99
    BluePrint Roller 496 B/B Chevy Engine
    (Part #91533496)
    x
                
    • 590 hp @ 5700 rpm
    • 600 ft.-lbs. @ 3700 rpm
    • 4-bolt main .060 over Gen IV block
    • 1 piece rear seal
    • Cylinders honed on computer controlled machine to within .0002
    • Cylinders are sonic tested for thickness
    • New forged steel externally balanced crankshaft 4.250 stroke
    • New 168 tooth flexplate
    • H-beam connecting rods with 150,000 PSI rod bolts
    • Hypereutectic pistons
    • 10.1 to 1 compression
    • Rotating assembly balanced
    • Hydraulic roller cam
    • 566 Intake / .566 exhaust & 242 intake / 248 exhaust duration @.050 - 112 degree lobe separation
    • Aluminum rectangular port cylinder heads
    • Power + crosswind dual plane aluminum intake manifold
    • Valve covers, oil pan and timing cover
    • New HEI distributor
    • Must use an electric fuel pump
    • Brass freeze plugs

    Crate Engine Installation Guide

    Truck Freight Shipping Charges Apply - click here for details.

  • GM Performance 19210007 Small Block Chevy 350/330 HP Long Block Engine
    GM Performance 19210007 Small Block Chevy 350/330 HP Long Block Engine
    (Part #35519210007)
    x
                Please view the product's page for more information
            
  • BluePrint 383 Small Block Chevy Roller Crate Engine
    BluePrint 383 Small Block Chevy Roller Crate Engine
    (Part #91533383)
    x
                Please view the product's page for more information
            
  • BluePrint Budget 350 Crate Engine
    $2,699.99
    $2,799.98
    BluePrint Budget 350 Crate Engine
    (Part #91532355)
    x
                
    • 325 hp @ 5400 rpm
    • 360 ft.-lbs. @ 3900 rpm
    • 4-bolt main, 1-piece rear main seal
    • Passenger side dipstick
    • Align honed main bearing bore
    • Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    • Cylinders are sonic tested for thickness
    • BluePrint premium cast iron crankshaft
    • Hypereutectic pistons
    • Chevy heavy beam rods with 150,000 PSI bolts
    • Aluminum dual plane intake
    • Hydraulic flat tappet cam
    • .480 intake / .486 exhaust & 229 intake / 230 exhaust duration @.050
    • Heavy duty double roller timing set
    • BluePrint premium center bolt cast iron
    • Hardened retainers and springs
    • 2.02 swirl polished intake valves
    • 1.60 swirl polished exhaust valves
    • 9.5 to 1 compression
    • New valve covers, oil pan and timing cover
    • Brass freeze plugs
    • New HEI distributor
  • BluePrint 383 Small Block Chevy Crate Engine
    BluePrint 383 Small Block Chevy Crate Engine
    (Part #91532383)
    x
                Please view the product's page for more information
            
  • GM Performance 12499529 Small Block Chevy 350/290 Long Block Engine
    GM Performance 12499529 Small Block Chevy 350/290 Long Block Engine
    (Part #35512499529)
    x
                Please view the product's page for more information
            
  • BluePrint 496 Big Block Chevy Crate Engine
    BluePrint 496 Big Block Chevy Crate Engine
    (Part #91532496)
    x
                

    This 496 B/B Chevy motor is a Speedway Exclusive! Machined and assembled at BluePrint Engines, each engine is dyno tested (includes individual dyno sheet) and comes with a 30 month/50,000 mile warranty. Each crate engine is built to crank out 480 hp @ 5200 rpm and 550 ft.-lbs. @ 4000 rpm. 

    • 480 hp @ 5200 rpm
    • 550 ft.-lbs. @ 4000 rpm
    • 4 bolt main .060" over block
    • Two piece rear seal, passenger side dipstick
    • New cast steel crankshaft externally balanced, 4.250" stroke
    • New 4340 forged connecting rods
    • Hypereutectic flat top pistons
    • 9:1 compression ratio
    • Rotating assembly balanced to within 2 grams
    • New 168 tooth flexplate
    • Chrome valve covers and timing cover
    • Power + Crosswind dual plane aluminum intake manifold
    • Melling high volume oil pump
    • GM cast iron oval port heads
    • Screw-in studs and guide plates
    • Hardened retainers and performance valve springs
    • Hydraulic flat tappet camshaft
    • New HEI distributor
    • 2500 stall converter recommended
    Crate Engine Installation Guide

    Truck Freight Shipping Charges Apply - click here for details.

  • BluePrint 302 Ford Hot Rod Crate Engine w/ Rear Sump Pan
    BluePrint 302 Ford Hot Rod Crate Engine w/ Rear Sump Pan
    (Part #9153210)
    x
                Please view the product's page for more information
            
  • Chevrolet Performance 19301293 GM ZZ5 Base Crate Engine
    Chevrolet Performance 19301293 GM ZZ5 Base Crate Engine
    (Part #35519301293)
    x
                Please view the product's page for more information
            
  • BluePrint Roller 347 Ford Engine
    $4,999.99
    BluePrint Roller 347 Ford Engine
    (Part #91533347)
    x
                
    • 415 hp and 400 torque
    • Hand picked seasoned blocks bored .040 over
    • Square and parallel decked
    • Align honed main bearing bore
    • Cylinders honed on computer controlled machine to within .0002
    • Cylinders are sonic tested for thickness
    • New cast steel crankshaft with 3.400 stroke
    • New rods with 150,000 psi bolts
    • Hypereutectic pistons
    • 10 to 1 compression
    • Balanced rotating assembly
    • Hydraulic roller camshaft
    • .543 Intake / .554 exhaust & 218 intake / 226 exhaust duration @ .050 - 112 degree lobe separation
    • Heavy duty double roller timing set
    • Aluminum, 58cc chamber cylinder heads
    • Valve covers
    • New HEI distributor
    • Painted oil pan
    • Brass freeze plugs

    Crate Engine Installation Guide

    Truck Freight Shipping Charges Apply - click here for details.

  • GM Performance 19201332 Big Block Chevy ZZ502 Turn-Key Crate Engine
    GM Performance 19201332 Big Block Chevy ZZ502 Turn-Key Crate Engine
    (Part #35519201332)
    x
                Please view the product's page for more information
            
  • Cadillac 4.6L LH2 Northstar Street Rod Crate Engine
    Cadillac 4.6L LH2 Northstar Street Rod Crate Engine
    (Part #91599282)
    x
                This Northstar engine was designed originally  for transverse front-wheel drive applications. It was modified  substantially in 2004 for longitudinal rear- and all-wheel drive use in  the STS, SRX, and XLR, as well as receiving continuously variable valve  timing on both intake and exhaust sides. The RWD (LH2) Northstar  produces 320 hp (239 kW) and 315 lb•ft (427 N•m). An increased  compression ratio of 10.5:1 enables most of the increase in power from  the L37 and LD8 Northstars.

    2004–2009    Cadillac XLR
    320 hp (239 kW) @ 6400 rpm    310 lb•ft (420 N•m) @ 4400 rpm
  • GM Performance 19210008 Small Block Chevy 350 Deluxe Turn-Key Engine
    GM Performance 19210008 Small Block Chevy 350 Deluxe Turn-Key Engine
    (Part #35519210008)
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2