Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 42

Products

Cooling

Shop Classic Truck Cooling At Speedway Motors

Speedway Motors has the cooling system components classic truck engines require. We stock aluminum radiators and caps to fit many models. Depend on our quality Small Block Chevy and Ford Flathead water pumps, electric fans and expansion tanks to keep your classic pickup cool. View our great selection of flex fans, shrouds, radiator caps and water pump pulleys online. Get the best quality classic truck parts at the lowest possible prices from Speedway Motors!

Featured Products
  • Flex-a-lite Heavy Duty Steel Cooling Fan
    Flex-a-lite Heavy Duty Steel Cooling Fan
    (Part #9101575)
    x
                

    Heavy duty fan recommended for stock cars. Moves the maximum amount of air for the best cooling. Steel blades, non-flex design.

    Available in 15", 17", 18" or 19" diameters.

    910-1575 Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • 1949-1953 Flathead Ford V8 Water Pump Gaskets
    1949-1953 Flathead Ford V8 Water Pump Gaskets
    (Part #91015537)
    x
                

    Whether you're installing original Flathead water pumps or Speedway's all-new redesigned pumps, you'll need fresh gaskets to seal them to the block. These gaskets are for 1949-1953 Ford Flathead V8 water pumps. Sold as a pair.

  • Aeroquip FBU0600 Starlite Hose, -6 AN
    Aeroquip FBU0600 Starlite Hose, -6 AN
    (Part #617406)
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Starlite hose can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Speedway Chevy Universal Aluminum Radiators
    Speedway Chevy Universal Aluminum Radiators
    (Part #917347)
    x
                

    Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

    These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

    • All-aluminum, furnace-brazed construction
    • No cheap epoxy glue or crimped in gaskets
    • Maximum amount of fins per inch allows greater heat transfer
    • Billet filler necks
    • Available in 22", 24", 28", or 31" widths (measurements include tanks)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

  • SPAL Thermoswitch Relay and Wiring Harness Kit
    SPAL Thermoswitch Relay and Wiring Harness Kit
    (Part #91064028)
    x
                

    This easy to use cooling fan relay kit includes a labeled wiring harness, 40 amp relay, fuse holder and coolant sensor. Available with 185° on/165° off or 195° on/175° off. Works great with the Spal Pulse-Width Fan Controller.

    • Relay wiring kits are a must-have when installing an electric fan
    • Designed to safely integrate with OEM wiring
    • Waterproof 40/50 Amp relay
    • Printed wires (for ease of installation)
    • 3/8" NPT (National Pipe Thread) stainless steel switch
    • Optional switched override capability
    910-64028 Instructions (PDF)
  • Modular Electric Water Pump Adapters for Small Block Chevy
    Modular Electric Water Pump Adapters for Small Block Chevy
    (Part #911885)
    x
                

    Check out our adapters for our newest Small Block Chevy high volume electric water pump. These engine water pump adapters are machined from billet aluminum and the fit & finish is excellent. 

    • Aluminum
    • Polished
    • Sold as a Pair
    • Designed to work with our modular electric water pump housing (911880)
  • Modular Electric Water Pump Adapters for Big Block Chevy
    Modular Electric Water Pump Adapters for Big Block Chevy
    (Part #911886)
    x
                

    Check out these adapters for our newest high volume electric water pump for Big Block Chevys. These adapters have been machined from billet aluminum and the fit & finish is excellent.

    • Aluminum Construction
    • Designed to work with our modular electric water pump housing (911880)
    • Polished Finish
    • Sold Individually
  • Speedway 180 Degree High Flow Thermostat
    Speedway 180 Degree High Flow Thermostat
    (Part #91015703)
    x
                

    Speedway takes a quality Robertshaw 330-180 high flow 180° thermostat, then modifies it to function properly in high RPM, high flow applications. They feature a balanced sleeve design and are strongly recommended for any performance application. Fits most domestic applications.

    • 2-1/8" diameter 
    • High flow 180° thermostat
    • Balanced sleeve design
    • Recommended for any performance application
    • Fits most domestic applications

    Learn more about the importance of the thermostat with cooling systems and how they work by reading our tech article, Cooling System Principles.

Filter

"Classic Truck, Cooling" Page 1 of 42

Page 1 of 42

  • SPAL Thermoswitch Relay and Wiring Harness Kit
    SPAL Thermoswitch Relay and Wiring Harness Kit
    (Part #91064028)
    x
                

    This easy to use cooling fan relay kit includes a labeled wiring harness, 40 amp relay, fuse holder and coolant sensor. Available with 185° on/165° off or 195° on/175° off. Works great with the Spal Pulse-Width Fan Controller.

    • Relay wiring kits are a must-have when installing an electric fan
    • Designed to safely integrate with OEM wiring
    • Waterproof 40/50 Amp relay
    • Printed wires (for ease of installation)
    • 3/8" NPT (National Pipe Thread) stainless steel switch
    • Optional switched override capability
    910-64028 Instructions (PDF)
  • Aluminum Fan Shroud, 28 W x 18.5 H
    Aluminum Fan Shroud, 28 W x 18.5 H
    (Part #9174026)
    x
                

    This aluminum fan shroud kit can be built to fit many applications with a belt-driven fan. The adjustable collar will accommodate 15"-20" fan diameters.

    • Instruction sheet
    • Shroud
    • Fan Ring, 3” x 65”
    • Flat tab, 3” x 7”
    • Brackets, 90º (6)
    • Screws (6)

    917-4026 Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • High Pressure Radiator Cap, 22-24 Lbs
    High Pressure Radiator Cap, 22-24 Lbs
    (Part #91015622)
    x
                

    A must have when racing! High pressure cap for radiators raises boiling point of water.

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

  • 15 Inch Stainless Steel Expansion Tank
    $32.99
    $34.99
    Product Rating: 4.71 Stars
    15 Inch Stainless Steel Expansion Tank
    (Part #91102215)
    x
                

    2" outside diameter, 1⁄4" O.D. nipples - works with any radiator. Stops loss of coolant and prevents pulling air into system when cooling off. Polished stainless steel expansion reservoir tank with screw-off cap.

    • Heavy wall construction
    • Billet screw in cap
    • Clear neoprene seal

    911-02215 Instructions (PDF)

  • Straight Aluminum Hose Connectors, 6 Inch
    Straight Aluminum Hose Connectors, 6 Inch
    (Part #9171763)
    x
                

    These 6" long aluminum radiator/coolant hose connectors have a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

    Choose hose diameter (O.D.) needed.

  • Walker 347 Radiator Transmission Cooler 45 Degree Fittings
    Walker 347 Radiator Transmission Cooler 45 Degree Fittings
    (Part #820347)
    x
                1/8" NPT and screw into most standard radiator transmission coolers. 45° for 5/16" steel line. 
            
  • Speedway Straight Silicone Radiator Hose, 6 Inch Long
    Speedway Straight Silicone Radiator Hose, 6 Inch Long
    (Part #9171006)
    x
                

    These 6" long silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated).

    Choose hose diameter (I.D.) needed.

     

  • Aluminum Fan Shroud Kit for 22 Inch Radiator, Engine Driven Fan
    Aluminum Fan Shroud Kit for 22 Inch Radiator, Engine Driven Fan
    (Part #9174020)
    x
                

    These universal fit aluminum fan shroud kits can be built to fit many applications with a belt-driven fan. The adjustable collar will accommodate 15"-20" fan diameters.

    Measures 19" tall x 16-3/4" wide x 2-5/8" deep. Works well with Speedway & Afco 24" wide radiators and will work with the Speedway & Afco 22" wide radiators with slight trimming of the width of the shroud.

    • Made for exact fit of many Muscle Car and Hotrod radiators
    • Allows the installer the choice of off center, side-to-side and above the radiator fan positioning
    • For crossflow or downflow radiator mounting
    • Includes fully-formed shroud of .063" lightweight aircraft aluminum
    • 3" trimmable collar
    • Adjustable collar; adjusts for 15-20" fan diameters
    • Includes all the necessary hardware and mounting instructions
    • Measures 19" tall x 16-3/4" wide x 2-5/8" deep

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

    Fan Shroud Installation Instructions (PDF)

     

  • Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    (Part #91015582)
    x
                

    Speedway's adjustable water pump is tried, tested and true. It has great flow, superior quality and standard features that are typically only available on water pumps costing twice as much. State-of-the-art aluminum casting and a precision impeller provide equal flow to both cylinder banks. If you're using a cog belt on your race car, this is the pump you want since it's adjustable. The 1/2" mount holes in this pump are larger than normal, allowing it to be moved up or down slightly to help with belt tension.

    • Adjustable mounting holes
    • High flow and pressure rates
    • Adjustable cam stop
    • Extra-thick fan hub
    • 3/4" inch heavy duty bearing
    • Pressed-fit and set-screw-retained fan hub
    • Large-diameter shaft and reinforced housing make it ideal for oval-track applications

    910-15582 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump

  • Chevy/Mopar Chrome Water Neck, Gasket Sealed
    Chevy/Mopar Chrome Water Neck, Gasket Sealed
    (Part #7204987)
    x
                These thermostat housings will fix your leak with a gasket seal design.  They feature a beautiful chrome finish and are designed as a universal application for most Chevy and Mopar engines with stock intake manifolds.  This design works with a Mopar thermostat only.  Late model Mopar style thermostats suggested.
    • Neck goes straight up, must use Mopar thermostat
    • Beautifully chrome plated
    • Uses gasket for a perfect seal
    • Center-to-center of mount bolts:  3-1/4"
    • Neck/hose size:  1-1/2"
    • Hardware included

    Water neck fits:

    • Chevy Small Block V8
    • Chevy 90 Degree V6
    • Late Mopar V8
  • U-Weld-It Custom Aluminum Radiator Kit, 26 x 19 Inch
    U-Weld-It Custom Aluminum Radiator Kit, 26 x 19 Inch
    (Part #910601)
    x
                
    Build and design your own radiator with these aluminum u-weld-it kits.  They come with everything you need to create a custom radiator to fit your specific application.  These radiators can be used as either a cross-flow or down-flow.
    • Overall Dimensions:  25-5/8" x 19-9/16" x 3-1/8"
    • Core Dimensions:  21" x 18" x 2-1/4"

    Kit Includes:

    • (1) 1-1/2" Hose connection
    • (1) 1-3/4" Hose connection
    • (1) Billet Aluminum filler neck
    • (1) Overflow tube
    • (1) Weld-on Bung
    • (1) Draincock

    Note: This kit requires aluminum welding and fabrication.  Kit is sold as an unfinished product.  Standard warranties DO NOT APPLY.

  • Aluminum 105 Degree Hose Connectors
    $16.99
    $20.00
    Product Rating: 4.50 Stars
    Aluminum 105 Degree Hose Connectors
    (Part #9171003)
    x
                

    These 105° bend aluminum tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

  • LSX/Vortec Thermostat Housing, Polished Aluminum
    LSX/Vortec Thermostat Housing, Polished Aluminum
    (Part #57545411)
    x
                

    These cast aluminum thermostat housings come in Polished Aluminum finish.

    Center to center is 3". The outer hole is 7/8" center to center from closest hole. 

  • Aeroquip FBM4216 Starlite Crimp Fitting, Straight, -16 AN
    Aeroquip FBM4216 Starlite Crimp Fitting, Straight, -16 AN
    (Part #6174216)
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Mr Gasket 2471S Thermocap Radiator Cap, 16 Lb.
    Mr Gasket 2471S Thermocap Radiator Cap, 16 Lb.
    (Part #5502471S)
    x
                

    How handy is this! The built-in calibrated thermometer on this chrome-plated 16 lb. radiator cap makes it easy to check your coolant temp - and to know when its safe to remove the cap. Fits radiators on most domestic vehicles.

    • Helps to prevent burn injuries
    • Integrated coolant reclamation valve works great with your coolant recovery system
    • Your radiator can reclaim coolant from your overflow bottle
    • Wide 30° to 270° F temperature range
    • Calibrated in centigrade and Fahrenheit
    • Color-coded temperature ranges
    • Chromed crown with a colored trim ring

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

  • Walker 345 Radiator Transmission Cooler 90 Degree Fittings
    Walker 345 Radiator Transmission Cooler 90 Degree Fittings
    (Part #820345)
    x
                1/8" NPT and screw into most standard radiator transmission coolers.  90° for 5/16" steel line. 
            
  • Walker 346 Radiator Transmission Cooler Steel Line Straight Fittings
    Walker 346 Radiator Transmission Cooler Steel Line Straight Fittings
    (Part #820346)
    x
                1/8" NPT and screw into most standard radiator transmission coolers. Straight for 5/16" steel line. 
            
  • Electric Fan Shroud, 21-24 In Tank-to-Tank x 14-17 In, 12 In Fan Hole
    Electric Fan Shroud, 21-24 In Tank-to-Tank x 14-17 In, 12 In Fan Hole
    (Part #91042012)
    x
                

    If you want to get rid of the mechanical fan and go to an electric, this is the ticket. Made of .062" aluminum, these shrouds have a wide lip to allow you to trim and fit most applications. Measure your radiator core from the inside edge to the inside edge of the tanks and then measure the core the other way. (The tanks are not included in the measurement.) 

    21"-24" Tank-to-Tank x 14"-17" w/ One 12" Fan Hole

    Dimensions (PDF)

    Shrouds with built-in fans also available.

    Installation Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • AFCO 80177 Electric Cooling Fan, 16 Inch S-Blade
    AFCO 80177 Electric Cooling Fan, 16 Inch S-Blade
    (Part #10680177)
    x
                

    These fans offer the best CFM vs. AMP draw of any electric units we have tested. All fans are made from glass-filled nylon and are rated at zero static. Each fan is also reversable, so it can be used as a puller or pusher.

    To reverse the fan, the fan blade can be flipped or the wires can be reversed.

    Fan Features:

    • Low amp draw
    • Mount in front or rear of radiator
    • Thin design
    • Reversible - push/pull
    • 3.25" depth at motor
    • 17.7 Amp
    • 2170 CFM

    Catalog Correction: These fans DO NOT include an on/off switch.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Plain Aluminum 348/409 Big Block Chevy Water Pump, Mechanical, Short
    Plain Aluminum 348/409 Big Block Chevy Water Pump, Mechanical, Short
    (Part #91015563)
    x
                

    If you are spending the money to build a 348 or 409 Chevy engine you had just as well put a high performance aluminum water pump on it. Threaded on top for heater hose fitting. Barbed hose fitting included. Comes with gaskets.

    • Threaded on top for heater hose fitting
    • Barbed hose fitting included
    • Comes with gaskets
    • Plain aluminum finish
Goto Previous PagePrevious Page
1 2 3 4 5 ... 42