Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck Cooling At Speedway Motors

Speedway Motors has the cooling system components classic truck engines require. We stock aluminum radiators and caps to fit many models. Depend on our quality Small Block Chevy and Ford Flathead water pumps, electric fans and expansion tanks to keep your classic pickup cool. View our great selection of flex fans, shrouds, radiator caps and water pump pulleys online. Get the best quality classic truck parts at the lowest possible prices from Speedway Motors!

Featured Products
Speedway Chevy Universal Aluminum Radiators
Speedway Chevy Universal Aluminum Radiators
SKU-917347
x
            

Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

  • All-aluminum, furnace-brazed construction
  • No cheap epoxy glue or crimped in gaskets
  • Maximum amount of fins per inch allows greater heat transfer
  • Billet filler necks
  • Available in 22", 24", 28", or 31" widths (measurements include tanks)

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

Speedway Ford-Mopar Universal Radiator
From: $129.99
Product Rating: 4.46 Stars
Speedway Ford-Mopar Universal Radiator
SKU-917348
x
            Leave it to Speedway to offer you a professional quality aluminum racing radiator at an affordable price. Check out these features: 
  • All aluminum, furnace brazed construction - NO EPOXY, NO GASKETS
  • 2 rows of 1" aluminum tubes (out cools 5 rows of copper)
  • Maximum amount of fins per inch, allows greater heat transfer
  • Billet filler neck - not stamped
  • Available in 22", 24", 26", 28" or 31" (width measurements include tanks)
  • 19" tall

In this Ford / Mopar Application the upper hose is located on the passenger side & the lower hose is located on the driver side.

Speedy Bill recommends using a 32 lb. or less radiator cap and to check it regularly.

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

1949-53 Flathead Car/Pickup Water Pump with Wide Belt
1949-53 Flathead Car/Pickup Water Pump with Wide Belt
SKU-91015592
x
            

Original flathead water pumps have always suffered from unreliable bronze bushings and carbon seals. They almost always leaked and even Ford manuals warned mechanics not to tighten fan belts too tight. The excess slack allowed belts to slip and lose contact with the generator and water pump pulleys, causing more cooling and power problems.

Speedway's completely new water pumps feature severe-duty roller and ball bearings, close tolerances and modular impellers to provide maximum flow and reduce cavitation. They also have modern ceramic seals on a heavy duty 3/4" shaft, making the assembly exceptionally strong and more efficient.

Note: This water pump is for 1949-1953 engines in 1948-1952 pickups or 1932-1948 cars.

  • Flathead Water Pump Features (Link)
  • Designed for use with 5/8" belt drive system
  • Severe-duty roller and ball bearings
  • Ceramic seals on sturdy 3/4" shaft
  • High-flow modular impeller reduces cavitation
  • Includes gasket and a connection for the heater hose return

1949-1953 Flathead Water Pump Installation Instructions (PDF)

Universal Aluminum Radiator - 27 Inch Tall, Passenger Side Outlet
Universal Aluminum Radiator - 27 Inch Tall, Passenger Side Outlet
SKU-9175159
x
            

These downflow aluminum radiators are for you guys that are building something a little different. They work great in many '30s, '40s & '50s medium width nose vehicles (be sure to measure before you order).

  • Built-in 7-plate automatic transmission cooler
  • Centered filler neck w/ hose nipple
  • 2 rows of 1" tubes
  • Trans Cooler ports:  1/2"-20 inverted flare

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.

"Classic Truck, Cooling" Page 1 of 21

  • SPAL Thermoswitch Relay and Wiring Harness Kit
    SPAL Thermoswitch Relay and Wiring Harness Kit
    SKU-91064028
    x
                

    This easy to use cooling fan relay kit includes a labeled wiring harness, 40 amp relay, fuse holder and coolant sensor. Available with 185° on/165° off or 195° on/175° off. Works great with the Spal Pulse-Width Fan Controller.

    • Relay wiring kits are a must-have when installing an electric fan
    • Designed to safely integrate with OEM wiring
    • Waterproof 40/50 Amp relay
    • Printed wires (for ease of installation)
    • 3/8" NPT (National Pipe Thread) stainless steel switch
    • Optional switched override capability
    910-64028 Instructions (PDF)
  • Aluminum Fan Shroud, 28 W x 18.5 H
    Aluminum Fan Shroud, 28 W x 18.5 H
    SKU-9174026
    x
                

    This aluminum fan shroud kit can be built to fit many applications with a belt-driven fan. The adjustable collar will accommodate 15"-20" fan diameters.

    • Instruction sheet
    • Shroud
    • Fan Ring, 3” x 65”
    • Flat tab, 3” x 7”
    • Brackets, 90º (6)
    • Screws (6)

    917-4026 Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • High Pressure Radiator Cap, 22-24 Lbs
    High Pressure Radiator Cap, 22-24 Lbs
    SKU-91015622
    x
                

    A must have when racing! High pressure cap for radiators raises boiling point of water.

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

  • 15 Inch Stainless Steel Expansion Tank
    $32.99
    $34.99
    Product Rating: 4.71 Stars
    15 Inch Stainless Steel Expansion Tank
    SKU-91102215
    x
                

    2" outside diameter, 1⁄4" O.D. nipples - works with any radiator. Stops loss of coolant and prevents pulling air into system when cooling off. Polished stainless steel expansion reservoir tank with screw-off cap.

    • Heavy wall construction
    • Billet screw in cap
    • Clear neoprene seal

    911-02215 Instructions (PDF)

  • Straight Aluminum Hose Connectors, 6 Inch
    Straight Aluminum Hose Connectors, 6 Inch
    SKU-9171763
    x
                

    These 6" long aluminum radiator/coolant hose connectors have a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

    Choose hose diameter (O.D.) needed.

  • Walker 347 Radiator Transmission Cooler 45 Degree Fittings
    Walker 347 Radiator Transmission Cooler 45 Degree Fittings
    SKU-820347
    x
                1/8" NPT and screw into most standard radiator transmission coolers. 45° for 5/16" steel line. 
            
  • Speedway Straight Silicone Radiator Hose, 6 Inch Long
    Speedway Straight Silicone Radiator Hose, 6 Inch Long
    SKU-9171006
    x
                

    These 6" long silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated).

    Choose hose diameter (I.D.) needed.

     

  • Aluminum Fan Shroud Kit for 22 Inch Radiator, Engine Driven Fan
    Aluminum Fan Shroud Kit for 22 Inch Radiator, Engine Driven Fan
    SKU-9174020
    x
                

    These universal fit aluminum fan shroud kits can be built to fit many applications with a belt-driven fan. The adjustable collar will accommodate 15"-20" fan diameters.

    Measures 19" tall x 16-3/4" wide x 2-5/8" deep. Works well with Speedway & Afco 24" wide radiators and will work with the Speedway & Afco 22" wide radiators with slight trimming of the width of the shroud.

    • Made for exact fit of many Muscle Car and Hotrod radiators
    • Allows the installer the choice of off center, side-to-side and above the radiator fan positioning
    • For crossflow or downflow radiator mounting
    • Includes fully-formed shroud of .063" lightweight aircraft aluminum
    • 3" trimmable collar
    • Adjustable collar; adjusts for 15-20" fan diameters
    • Includes all the necessary hardware and mounting instructions
    • Measures 19" tall x 16-3/4" wide x 2-5/8" deep

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

    Fan Shroud Installation Instructions (PDF)

     

  • Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    SKU-91015582
    x
                

    Speedway's adjustable water pump is tried, tested and true. It has great flow, superior quality and standard features that are typically only available on water pumps costing twice as much. State-of-the-art aluminum casting and a precision impeller provide equal flow to both cylinder banks. If you're using a cog belt on your race car, this is the pump you want since it's adjustable. The 1/2" mount holes in this pump are larger than normal, allowing it to be moved up or down slightly to help with belt tension.

    • Adjustable mounting holes
    • High flow and pressure rates
    • Adjustable cam stop
    • Extra-thick fan hub
    • 3/4" inch heavy duty bearing
    • Pressed-fit and set-screw-retained fan hub
    • Large-diameter shaft and reinforced housing make it ideal for oval-track applications

    910-15582 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump

  • Chevy/Mopar Chrome Water Neck, Gasket Sealed
    Chevy/Mopar Chrome Water Neck, Gasket Sealed
    SKU-7204987
    x
                These thermostat housings will fix your leak with a gasket seal design.  They feature a beautiful chrome finish and are designed as a universal application for most Chevy and Mopar engines with stock intake manifolds.  This design works with a Mopar thermostat only.  Late model Mopar style thermostats suggested.
    • Neck goes straight up, must use Mopar thermostat
    • Beautifully chrome plated
    • Uses gasket for a perfect seal
    • Center-to-center of mount bolts:  3-1/4"
    • Neck/hose size:  1-1/2"
    • Hardware included

    Water neck fits:

    • Chevy Small Block V8
    • Chevy 90 Degree V6
    • Late Mopar V8
  • U-Weld-It Custom Aluminum Radiator Kit, 26 x 19 Inch
    U-Weld-It Custom Aluminum Radiator Kit, 26 x 19 Inch
    SKU-910601
    x
                
    Build and design your own radiator with these aluminum u-weld-it kits.  They come with everything you need to create a custom radiator to fit your specific application.  These radiators can be used as either a cross-flow or down-flow.
    • Overall Dimensions:  25-5/8" x 19-9/16" x 3-1/8"
    • Core Dimensions:  21" x 18" x 2-1/4"

    Kit Includes:

    • (1) 1-1/2" Hose connection
    • (1) 1-3/4" Hose connection
    • (1) Billet Aluminum filler neck
    • (1) Overflow tube
    • (1) Weld-on Bung
    • (1) Draincock

    Note: This kit requires aluminum welding and fabrication.  Kit is sold as an unfinished product.  Standard warranties DO NOT APPLY.

  • Aluminum 105 Degree Hose Connectors
    $16.99
    $20.00
    Product Rating: 4.50 Stars
    Aluminum 105 Degree Hose Connectors
    SKU-9171003
    x
                

    These 105° bend aluminum tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

  • LSX/Vortec Thermostat Housing, Polished Aluminum
    LSX/Vortec Thermostat Housing, Polished Aluminum
    SKU-57545411
    x
                

    These cast aluminum thermostat housings come in Polished Aluminum finish.

    Center to center is 3". The outer hole is 7/8" center to center from closest hole. 

  • Aeroquip FBM4216 Starlite Crimp Fitting, Straight, -16 AN
    Aeroquip FBM4216 Starlite Crimp Fitting, Straight, -16 AN
    SKU-6174216
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Mr Gasket 2471S Thermocap Radiator Cap, 16 Lb.
    Mr Gasket 2471S Thermocap Radiator Cap, 16 Lb.
    SKU-5502471S
    x
                

    How handy is this! The built-in calibrated thermometer on this chrome-plated 16 lb. radiator cap makes it easy to check your coolant temp - and to know when its safe to remove the cap. Fits radiators on most domestic vehicles.

    • Helps to prevent burn injuries
    • Integrated coolant reclamation valve works great with your coolant recovery system
    • Your radiator can reclaim coolant from your overflow bottle
    • Wide 30° to 270° F temperature range
    • Calibrated in centigrade and Fahrenheit
    • Color-coded temperature ranges
    • Chromed crown with a colored trim ring

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

  • Walker 345 Radiator Transmission Cooler 90 Degree Fittings
    Walker 345 Radiator Transmission Cooler 90 Degree Fittings
    SKU-820345
    x
                1/8" NPT and screw into most standard radiator transmission coolers.  90° for 5/16" steel line. 
            
  • Walker 346 Radiator Transmission Cooler Steel Line Straight Fittings
    Walker 346 Radiator Transmission Cooler Steel Line Straight Fittings
    SKU-820346
    x
                1/8" NPT and screw into most standard radiator transmission coolers. Straight for 5/16" steel line. 
            
  • Electric Fan Shroud, 21-24 In Tank-to-Tank x 14-17 In, 12 In Fan Hole
    Electric Fan Shroud, 21-24 In Tank-to-Tank x 14-17 In, 12 In Fan Hole
    SKU-91042012
    x
                

    If you want to get rid of the mechanical fan and go to an electric, this is the ticket. Made of .062" aluminum, these shrouds have a wide lip to allow you to trim and fit most applications. Measure your radiator core from the inside edge to the inside edge of the tanks and then measure the core the other way. (The tanks are not included in the measurement.) 

    21"-24" Tank-to-Tank x 14"-17" w/ One 12" Fan Hole

    Fan Shroud Dimension Chart (GIF)

    Shrouds with built-in fans also available.

    Installation Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • AFCO 80177 Electric Cooling Fan, 16 Inch S-Blade
    AFCO 80177 Electric Cooling Fan, 16 Inch S-Blade
    SKU-10680177
    x
                

    These fans offer the best CFM vs. AMP draw of any electric units we have tested. All fans are made from glass-filled nylon and are rated at zero static. Each fan is also reversable, so it can be used as a puller or pusher.

    To reverse the fan, the fan blade can be flipped or the wires can be reversed.

    Fan Features:

    • Low amp draw
    • Mount in front or rear of radiator
    • Thin design
    • Reversible - push/pull
    • 3.25" depth at motor
    • 17.7 Amp
    • 2170 CFM

    Catalog Correction: These fans DO NOT include an on/off switch.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Plain Aluminum 348/409 Big Block Chevy Water Pump, Mechanical, Short
    Plain Aluminum 348/409 Big Block Chevy Water Pump, Mechanical, Short
    SKU-91015563
    x
                

    If you are spending the money to build a 348 or 409 Chevy engine you had just as well put a high performance aluminum water pump on it. Threaded on top for heater hose fitting. Barbed hose fitting included. Comes with gaskets.

    • Threaded on top for heater hose fitting
    • Barbed hose fitting included
    • Comes with gaskets
    • Plain aluminum finish
  • Offenhauser 1949-53 Flathead Angled Water Neck
    Offenhauser 1949-53 Flathead Angled Water Neck
    SKU-56034965
    x
                Replace your corroded or missing Flathead water neck with this high-quality  version. Made of cast aluminum for a good seal and longevity. 
    • Uses 1-1/4" hose
    • Includes bolts and gasket
    • Two required per engine
  • Speedway Straight Silicone Radiator Hose, 12 Inch Long
    Speedway Straight Silicone Radiator Hose, 12 Inch Long
    SKU-9171007
    x
                

    These 12" long silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated).

    Choose hose diameter (I.D.) needed.

     

  • Aluminum Upper Pulley Screw Kit
    Aluminum Upper Pulley Screw Kit
    SKU-91015440
    x
                Set of four tapered seat bolts to properly secure upper aluminum water pump pulleys. Flat head cap. Black oxide finish. 
            
  • Cooling Components CCI-1730 Cooling Machine Electric Fan, Style 30
    Cooling Components CCI-1730 Cooling Machine Electric Fan, Style 30
    SKU-91015631
    x
                At one time or another we all have had a car overheat. These fan/shroud combos are just the ticket to avoid having it happen again. These 2500 CFM pull-type fans measure 2-5/8" deep at the motor, 2-3/8" at the mounting brackets and 1-1/2" at the high impact shroud.
    • 18.5" wide x 20.31" high
    • Can be easily reduced in size to 17-1/4" wide x 19-1/4" high
    • 12 volt operation
    • Lower engine operating temperatures
    • Saves horsepower
    • Better fuel mileage
    • Constructed of high-impact ABS material

    Note:  This fan motor requires the use of a 70 amp or larger relay.

    Fan Application Chart (GIF)

    (Style 30 fits same applications a Style 50, but Style 30 gives additional clearance at water pump.)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Electric Fan Shroud w/ Two Fans, 25-28 Inch Tank-to-Tank x 14-17 Inch
    Electric Fan Shroud w/ Two Fans, 25-28 Inch Tank-to-Tank x 14-17 Inch
    SKU-9104214
    x
                

    If you want to get rid of the mechanical fan and go to an electric, this is the ticket. Made of .062" aluminum, these shrouds have a wide lip to allow you to trim and fit most applications. Measure your radiator core from the inside edge to the inside edge of the tanks and then measure the core the other way. (The tanks are not included in the measurement.) 

    Control and wiring sold separately.

    Fan Shroud Dimension Chart (GIF)

    910-4214 Instructions (PDF) 

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Walker WS55A Radiator Fan Shroud, Style D, 22 x 18 Inch
    Walker WS55A Radiator Fan Shroud, Style D, 22 x 18 Inch
    SKU-82055A
    x
                

    Maximize your radiators' effectiveness with a tight-fitting fan shroud. Use of these shrouds has produced temperature drops of up to 30 degrees!

    Walker shrouds are vacuum formed from a very dense polyethylene. This high-impact, heat resistant material has a lightly textured, semigloss black finish. The cooling fan hole is not cut out so the installer can tailor that to the exact fan location and diameter.

    See Application tab for application information.

    Fan Shroud Size Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Speedway 180 Degree High Flow Thermostat
    Speedway 180 Degree High Flow Thermostat
    SKU-91015703
    x
                

    Speedway takes a quality Robertshaw 330-180 high flow 180° thermostat, then modifies it to function properly in high RPM, high flow applications. They feature a balanced sleeve design and are strongly recommended for any performance application. Fits most domestic applications.

    • 2-1/8" diameter 
    • High flow 180° thermostat
    • Balanced sleeve design
    • Recommended for any performance application
    • Fits most domestic applications

    Learn more about the importance of the thermostat with cooling systems and how they work by reading our tech article, Cooling System Principles.

  • AFCO 80158 Coolant Recovery Tank
    AFCO 80158 Coolant Recovery Tank
    SKU-10680158
    x
                

    AFCO's 100% aluminum coolant recovery tank catches radiator overflow before it leaks all over the track. Completes a closed system. Includes two 3/8" aluminum hose barbs.

    Product holds 1.5 pints.

    Learn more about cooling with recovery systems and how they work by reading our tech article. Cooling System Principles.  

  • Walker C-Ac497-1 Cobra Ford 39 DL, 40-41 PU Rad/Condenser Chevy Engine
    Walker C-Ac497-1 Cobra Ford 39 DL, 40-41 PU Rad/Condenser Chevy Engine
    SKU-820CAC4971
    x
                Please view the product's page for more information
            
  • AFCO 80094B Black Billet Aluminum Radiator Cap with Logo
    AFCO 80094B Black Billet Aluminum Radiator Cap with Logo
    SKU-10680094B
    x
                These quality radiator caps help prevent the loss of coolant that can lead to overheating.
    • 16 lb. radiator cap is made of billet aluminum with black finish
    • Engraved AFCO logo
    • For Street use only

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

  • Aeroquip FBM4211 Starlite Crimp Fitting, Straight, -4 AN
    Aeroquip FBM4211 Starlite Crimp Fitting, Straight, -4 AN
    SKU-6174211
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4212 Starlite Crimp Fitting, Straight, -6 AN
    Aeroquip FBM4212 Starlite Crimp Fitting, Straight, -6 AN
    SKU-6174212
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Gates 26501 Vulco-Flex Green Stripe Radiator Hose, 1-3/4 x 13-1/2 Inch
    Gates 26501 Vulco-Flex Green Stripe Radiator Hose, 1-3/4 x 13-1/2 Inch
    SKU-39526501
    x
                

    Gates Vulco-Flex "Green Stripe" heavy duty radiator hoses include an internal spiral wire bonded to the I.D. of the hose, which prevents collapsing and kinking while positively retaining the spring.

    • Designed to replace straight or curved coolant hoses
    • Excellent flexibility, yet collapse and kink resistant
    • Heat resistant construction throughout
    • Approved for marine applications
  • Standard Transmission Cooler
    $19.99
    Product Rating: 5.00 Stars
    Standard Transmission Cooler
    SKU-91023101
    x
                

    Use this 4-pass standard transmssion cooler in place of radiator lower tank cooler, or as a supplement to it.

    • 5" Tall x 16-3/4" Wide x 3/4" Thick
    • Includes 4 ft. rubber hose (3/8" I.D.), 4 stainless hose clamps and nylon mounting kit

    Transmission Cooler Installation Instructions (PDF)

  • LSX/Vortec Water Pump, Cast Aluminum
    LSX/Vortec Water Pump, Cast Aluminum
    SKU-57545408
    x
                

    Designed specifically for the GM LS Gen III/IV engines, these high flow aluminum pumps are engineered to deliver a faster, higher volume flow of water. Pressure-injected, aluminum alloy pump bodies significantly improve cooling for any street, high performance, or racing application. Featuring a precision cast-iron impeller design and pressure-balanced water passages, these "super pumps" equalize flow and minimize engine hot spots at any speed.

    • Fits 1997-2003 engines
    • 8-hole billet steel hub
    • Heavy-duty 0.750" shaft
    • Shielded-sealed roller ball bearings
  • Griffin 7-70084 Deluxe Alum Radiator for 30-31 Ford Chassis w/Small Block Chevy
    Griffin 7-70084 Deluxe Alum Radiator for 30-31 Ford Chassis w/Small Block Chevy
    SKU-91735229
    x
                
    Griffin Aluminum radiators give superior cooling over a brass/copper radiator. They feature 2 rows of 1.25" tubes furnace brazed into the core which provides 40% greater tube-to-fin contact over a copper/brass radiator.  These radiators are designed for use on 1930-31 Ford Chassis with a small block Chevy engine.
    • Built-in HD automatic transmission oil cooler
    • Hood support brackets are included
    • Brackets on side for gille shell
    • Brackets on top for support rods
    • No "dummy" filler neck

    Griffin Ford Engine Radiator Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Stant 10372 High Pressure Racing Radiator Cap, 21-25 Lbs
    Stant 10372 High Pressure Racing Radiator Cap, 21-25 Lbs
    SKU-91015706
    x
                

    Used by all the top NASCAR teams. The best high pressure radiator caps you can buy!

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

  • Moroso 63500 Small Block Chevy Aluminum Short Water Pump
    Moroso 63500 Small Block Chevy Aluminum Short Water Pump
    SKU-54563500
    x
                

    Moroso first pioneered the aluminum water pump for racing over 15 years ago. Over the years, continual improvements have resulted in providing the best cooling system components available for competition use.

    • Computer designed housing cast from 356-T6 aluminum
    • Lightweight impeller maintains consistent coolant temp throughout the water jacket
    • Low-drag impeller adds 14HP @ 7,500 RPM 
    • Includes integral cam stop boss
    • Overall length of 5.603" from rear mounting face to hub face  

    Fits 1955-1968 “Short” design 5/8" shaft S/B Chevy appliactions. Note: Pump will not clear a billet 910-11040 timing cover.

    545-63500 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.    

  • Aeroquip FBU0400 Starlite Hose, -4 AN
    Aeroquip FBU0400 Starlite Hose, -4 AN
    SKU-617404
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Gates 25478 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 17 Inch
    Gates 25478 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 17 Inch
    SKU-39525478
    x
                

    Gates Vulco-Flex II radiator hoses include an interanl spiral wire which prevents collapsing and kinking. The spiral wire is retained within a groove on the inside of the hose.

    • Will bend in almost any direction
    • Replicates the angles of original equipment coolant hose
    • Improved sealing surface for greater leak resistance and increased flexibility
Goto Previous PagePrevious Page
1 2 3 4 5 ... 21