Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck Cooling At Speedway Motors

Speedway Motors has the cooling system components classic truck engines require. We stock aluminum radiators and caps to fit many models. Depend on our quality Small Block Chevy and Ford Flathead water pumps, electric fans and expansion tanks to keep your classic pickup cool. View our great selection of flex fans, shrouds, radiator caps and water pump pulleys online. Get the best quality classic truck parts at the lowest possible prices from Speedway Motors!

"Classic Truck, Cooling Fan" Page 1 of 3

  • Aluminum Fan Shroud, 28 W x 18.5 H
    Aluminum Fan Shroud, 28 W x 18.5 H
    SKU-9174026
    x
                

    This aluminum fan shroud kit can be built to fit many applications with a belt-driven fan. The adjustable collar will accommodate 15"-20" fan diameters.

    • Instruction sheet
    • Shroud
    • Fan Ring, 3” x 65”
    • Flat tab, 3” x 7”
    • Brackets, 90º (6)
    • Screws (6)

    917-4026 Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Electric Fan Shroud, 21-24 In Tank-to-Tank x 14-17 In, 12 In Fan Hole
    Electric Fan Shroud, 21-24 In Tank-to-Tank x 14-17 In, 12 In Fan Hole
    SKU-91042012
    x
                

    If you want to get rid of the mechanical fan and go to an electric, this is the ticket. Made of .062" aluminum, these shrouds have a wide lip to allow you to trim and fit most applications. Measure your radiator core from the inside edge to the inside edge of the tanks and then measure the core the other way. (The tanks are not included in the measurement.) 

    21"-24" Tank-to-Tank x 14"-17" w/ One 12" Fan Hole

    Fan Shroud Dimension Chart (GIF)

    Shrouds with built-in fans also available.

    Installation Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • AFCO 80177 Electric Cooling Fan, 16 Inch S-Blade
    AFCO 80177 Electric Cooling Fan, 16 Inch S-Blade
    SKU-10680177
    x
                

    These fans offer the best CFM vs. AMP draw of any electric units we have tested. All fans are made from glass-filled nylon and are rated at zero static. Each fan is also reversable, so it can be used as a puller or pusher.

    To reverse the fan, the fan blade can be flipped or the wires can be reversed.

    Fan Features:

    • Low amp draw
    • Mount in front or rear of radiator
    • Thin design
    • Reversible - push/pull
    • 3.25" depth at motor
    • 17.7 Amp
    • 2170 CFM

    Catalog Correction: These fans DO NOT include an on/off switch.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Cooling Components CCI-1730 Cooling Machine Electric Fan, Style 30
    Cooling Components CCI-1730 Cooling Machine Electric Fan, Style 30
    SKU-91015631
    x
                At one time or another we all have had a car overheat. These fan/shroud combos are just the ticket to avoid having it happen again. These 2500 CFM pull-type fans measure 2-5/8" deep at the motor, 2-3/8" at the mounting brackets and 1-1/2" at the high impact shroud.
    • 18.5" wide x 20.31" high
    • Can be easily reduced in size to 17-1/4" wide x 19-1/4" high
    • 12 volt operation
    • Lower engine operating temperatures
    • Saves horsepower
    • Better fuel mileage
    • Constructed of high-impact ABS material

    Note:  This fan motor requires the use of a 70 amp or larger relay.

    Fan Application Chart (GIF)

    (Style 30 fits same applications a Style 50, but Style 30 gives additional clearance at water pump.)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Electric Fan Shroud w/ Two Fans, 25-28 Inch Tank-to-Tank x 14-17 Inch
    Electric Fan Shroud w/ Two Fans, 25-28 Inch Tank-to-Tank x 14-17 Inch
    SKU-9104214
    x
                

    If you want to get rid of the mechanical fan and go to an electric, this is the ticket. Made of .062" aluminum, these shrouds have a wide lip to allow you to trim and fit most applications. Measure your radiator core from the inside edge to the inside edge of the tanks and then measure the core the other way. (The tanks are not included in the measurement.) 

    Control and wiring sold separately.

    Fan Shroud Dimension Chart (GIF)

    910-4214 Instructions (PDF) 

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Walker WS55A Radiator Fan Shroud, Style D, 22 x 18 Inch
    Walker WS55A Radiator Fan Shroud, Style D, 22 x 18 Inch
    SKU-82055A
    x
                

    Maximize your radiators' effectiveness with a tight-fitting fan shroud. Use of these shrouds has produced temperature drops of up to 30 degrees!

    Walker shrouds are vacuum formed from a very dense polyethylene. This high-impact, heat resistant material has a lightly textured, semigloss black finish. The cooling fan hole is not cut out so the installer can tailor that to the exact fan location and diameter.

    See Application tab for application information.

    Fan Shroud Size Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Dual 10 Inch Fan Shroud Combo, 22 W x 17 H
    Dual 10 Inch Fan Shroud Combo, 22 W x 17 H
    SKU-9174007
    x
                

    These universal fit dual fan/aluminum shroud assemblies fit many applications. Features heavy duty SPAL fans.

    Radiator/Shroud Style Guide

    917-4007 Diagram (PDF) 

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • SPAL Curved Blade Fans
    $160.99
    Product Rating: 4.83 Stars
    SPAL Curved Blade Fans
    SKU-910153
    x
                

    These SPAL fans feature curved blades which are much quieter than straight bladed fans. Pull type only. Available in 14" or 16" diameter.

    No mounting hardware is include. You may wish to order 910-64065.

    910-153 Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Steel Four Blade Racing Fan, 19 Inch
    $34.99
    $36.99
    Product Rating: 5.00 Stars
    Steel Four Blade Racing Fan, 19 Inch
    SKU-9101519
    x
                

    These four blade fans have proven to be the fan of choice due to weight, drag and cooling efficiency. Most modifieds use the 15" to 17" while late models and street stocks tend to use the 18" and 19".

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Flex-a-lite Model 155 Electric Cooling Fan
    Flex-a-lite Model 155 Electric Cooling Fan
    SKU-91015445
    x
                

    One piece plastic shroud with full contact rubber seal that maximizes air flow. Highest CFM rating in the industry for this size. All air comes through the radiator. Universal rigid bracket mount system. No thru core mounting required. High torque, high RPM motor.

    • 4-1/4" thick at center of fan with motor
    • Threaded bracket hardware is adjustable from 19-1/4" at fan to approximately 35" maximum width
    • Draws 13.9 amps
    • Hardware is slotted both directions for width and depth of mounting

    This fan works as a puller only and has a 15" diameter with a 18" tall x 16" wide x 4-1/2" thick shroud.

    Electric Cooling Fan Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

     
  • Derale Performance Plain Stainless Flex Fan
    Derale Performance Plain Stainless Flex Fan
    SKU-910156
    x
                

    Features a black powdercoated steel hub center with stainless steel blades. Great for applications where space is at a premium.

    • Rated to 8,000 RPM
    • Standard Rotation (clockwise)
    • Non-reversable
    • Mounting surface to front: 1/4"
    • Mounting surface to rear: 7/8" 
    • Fan Pilot: 5/8" (.625")
    • Blade pitch: 50°

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Perma-Cool 86150 Turbo Flex Reverse Stainless Flex Fan, 15 Inch, Black
    Perma-Cool 86150 Turbo Flex Reverse Stainless Flex Fan, 15 Inch, Black
    SKU-57386150
    x
                Turbo Flex flex fans are designed to pull even more air through the  radiator at low rpm when the speed of the vehicle isn't enough to cool  the engine's coolant system. At higher rpm, when the vehicle's speed  forces air through the radiator, the fan blades flatten out, resulting  in less power being used to spin the fan.  Ideal for applications  requiring extra cooling, use these stainless  steel flex fans with reverse rotation water pumps and serpentine drives,  on vehicles with Turbos or superchargers.  They improve overall engine  performance and gas mileage, featuring a 15" diameter and black center  hub. 
    • Reverse rotation
    • Black center
    • 1 .625" thick blades
    • Stainless Steel Blades

    Turbo-Flex 86150 Installation Instructions (PDF)

  • Afco 85287 Electric Fan Switch, 195 Degree On, 3/8 NPT
    New
    Afco 85287 Electric Fan Switch, 195 Degree On, 3/8 NPT
    SKU-10685287
    x
                This AFCO electric fan switch uses a ground wire to  turn the electric cooling fan on. The thermal fan switch features a 3/8" NPT threaded brass body with a spade terminal for hook-up. Cooling  fan switch activates a cooling fan relay (not included, sold seperately)  when the bulb is immersed in coolant that is 195° F. When the engine  cools to 185° F, the contacts on the fan relay switch open, and the fan  stops automatically. Make sure the temperature fan switch bulb is  submerged in the HOT engine coolant.
    • Non-adjustable radiator fan sensor
    • ON @ 195° F
    • OFF @ 185° F
    • Uses ground wire to switch current to fan
  • Cooling Fan Control for Electric Gauges
    Cooling Fan Control for Electric Gauges
    SKU-91064023
    x
                

    This is the slickest thing we've seen in years. This adjustable box simply uses your electric temperature gauge as the sending unit to control your cooling fan. Features a built-in 30 amp relay to provide maximum power to your fan and it comes with a tiny LED lamp to let you know when the fan is running plus a fuselink to protect the wiring between the temperature control unit and the fan.

    • Easy to install and adjust 
    • No radiator tube
    • Uses existing wiring
    • Simple hookup
    • Fully adjustable
    • Driver-controlled temperature
    • A/C compressor switch to automatically turn on fans
    • 30 amp relay inside box
    • Protective fuse link
    • For 12 volt electrical systems
    • Measures 4-3/4" x 3" x 1-1/4"
  • Steel Four Blade Racing Fan, 18 Inch
    $32.99
    $40.00
    Product Rating: 3.00 Stars
    Steel Four Blade Racing Fan, 18 Inch
    SKU-9101518
    x
                

    These four blade fans have proven to be the fan of choice due to weight, drag and cooling efficiency. Most modifieds use the 15" to 17" while late models and street stocks tend to use the 18" and 19".

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Maradyne Fans MFA116 Nylon Flex Fan, 16 Inch
    Maradyne Fans MFA116 Nylon Flex Fan, 16 Inch
    SKU-359416
    x
                

    One-piece nylon flex fan with reinforced construction for use up to 8000 RPM. Lightweight design (only 12 oz.) relieves stress on your water pump and bearings. Patented S-blade design provides maximum cooling and is ideal for race applications where weight is a concern.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Cooling Fan Control for Mechanical Gauges
    Cooling Fan Control for Mechanical Gauges
    SKU-91064024
    x
                

    Easy to install and adjust! This is the slickest thing we've seen in years. This adjustable box simply uses your mechaical temperature gauge as the sending unit to control your cooling fan. Includes a temperature sender (1/8" NPT fitting) which installs into your engine's water jacket. Installation is as simple as hooking up seven wires and then turning a knob on the end of the box to set the on and off temperatures for the fan.

    Features a built-in 30 amp relay to provide maximum power to your fan and it comes with a tiny LED lamp to let you know when the fan is running plus a fuselink to protect the wiring between the temperature control unit and the fan.

    • No radiator tube
    • Uses existing wiring
    • Simple hookup
    • Fully adjustable
    • Driver-controlled temperature
    • A/C compressor switch to automatically turn on fans
    • 30 amp relay inside box
    • Protective fuse link
    • For 12 volt electrical systems
    • Measures 4-3/4" x 3" x 1-1/4"

     

  • Eyes Fan Cover
    $44.99
    Eyes Fan Cover
    SKU-540099
    x
                Authentic "Eyes" design. Cast aluminum. 5-1/4" diameter and 1-1/8" deep.
            
  • Electric Fan Shroud w/ One Fan, 21-24 Inch Tank-to-Tank x 14-17 Inch
    Electric Fan Shroud w/ One Fan, 21-24 Inch Tank-to-Tank x 14-17 Inch
    SKU-9104212
    x
                

    If you want to get rid of the mechanical fan and go to an electric, this is the ticket. Made of .062" aluminum, these shrouds have a wide lip to allow you to trim and fit most applications. Measure your radiator core from the inside edge to the inside edge of the tanks and then measure the core the other way. (The tanks are not included in the measurement.) 

    Control and wiring sold separately.

    Fan Shroud Dimension Chart (GIF)

    910-4212 Instructions (PDF) 

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Nylon Flex Fan, 18 Inch
    $26.99
    Product Rating: 4.50 Stars
    Nylon Flex Fan, 18 Inch
    SKU-359418
    x
                

    One-piece nylon flex fan with reinforced construction for use up to 8000 RPM. Lightweight design (only 12 oz.) relieves stress on your water pump and bearings. Patented S-blade design provides maximum cooling and is ideal for race applications where weight is a concern.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Walker WS70 Radiator Fan Shroud, Style F, 19-1/4 x 20-1/8 Inch
    Walker WS70 Radiator Fan Shroud, Style F, 19-1/4 x 20-1/8 Inch
    SKU-82070
    x
                

    Maximize your radiators' effectiveness with a tight-fitting fan shroud. Use of these shrouds has produced temperature drops of up to 30 degrees!

    Walker shrouds are vacuum formed from a very dense polyethylene. This high-impact, heat resistant material has a lightly textured, semigloss black finish. The cooling fan hole is not cut out so the installer can tailor that to the exact fan location and diameter.

    See Application tab for application information.

    Fan Shroud Size Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Flex-a-lite Heavy Duty Steel Cooling Fan
    Flex-a-lite Heavy Duty Steel Cooling Fan
    SKU-9101575
    x
                

    Heavy duty fan recommended for stock cars. Moves the maximum amount of air for the best cooling. Steel blades, non-flex design.

    Available in 15", 17", 18" or 19" diameters.

    910-1575 Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Walker WS60 Radiator Fan Shroud, Style E, 23 x 16 Inch
    Walker WS60 Radiator Fan Shroud, Style E, 23 x 16 Inch
    SKU-82060
    x
                

    Maximize your radiators' effectiveness with a tight-fitting fan shroud. Use of these shrouds has produced temperature drops of up to 30 degrees!

    Walker shrouds are vacuum formed from a very dense polyethylene. This high-impact, heat resistant material has a lightly textured, semigloss black finish. The cooling fan hole is not cut out so the installer can tailor that to the exact fan location and diameter.

    See Application tab for application information.

    Fan Shroud Size Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Single 16 Inch Fan Shroud Combo, 20.5 W x 17.5 H
    Single 16 Inch Fan Shroud Combo, 20.5 W x 17.5 H
    SKU-9174084
    x
                

    This universal fit single 16" electric fan and shroud assembly has the power to cool even the most potent engines. Features heavy duty SPAL fan.

    917-4084 Diagram (PDF)  

    Note: This fan directly fits 1968-72 Chevelle/Malibu and 1970-81 Camaro, but may also fit other applications as well with slight modification.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Dual 12 Inch Fan Shroud Combo, 28 W x 17 H
    Dual 12 Inch Fan Shroud Combo, 28 W x 17 H
    SKU-9174004
    x
                

    These universal fit dual fan/aluminum shroud assemblies fit many applications. Features heavy duty SPAL fans.

    Radiator/Shroud Style Guide

    917-4004 Diagram (PDF) 

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Chrome/Stainless Flex Fan
    $47.99
    Product Rating: 4.00 Stars
    Chrome/Stainless Flex Fan
    SKU-910157
    x
                

    Features a chrome plated steel hub center with stainless steel blades. Great for applications where space is at a premium.

    • Standard Rotation (clockwise)
    • Non-reversible
    • Rated to 8,000+ RPM
    • Narrow blade width and moderate pitch improves air flow with minimal horsepower loss
    • Specially formed blade tips minimize fan noise
    • Two piece steel center hubs for positive blade attachment
    • Flange bolt spacing: 1-3/4" - 2-1/4" (1.309"-2.782")
    • Mounting surface to front: 1/4"
    • Mounting surface to rear: 7/8" 
    • Blade pitch: 50°

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Steel Four Blade Racing Fan, 15 Inch
    $29.99
    $35.00
    Product Rating: 5.00 Stars
    Steel Four Blade Racing Fan, 15 Inch
    SKU-9101515
    x
                

    These four blade fans have proven to be the fan of choice due to weight, drag and cooling efficiency. Most modifieds use the 15" to 17" while late models and street stocks tend to use the 18" and 19".

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • 10" Electric Fan - 710 CFM
    10" Electric Fan - 710 CFM
    SKU-910346937
    x
                The manufacturer of this fan suggests using a 20 amp fuse for EACH of these fans. This fan measures 11 1/2" on its widest side, 11" on its narrowest side and it is 2 1/2" deep at the center of the motor at the bearing and is 2" at the rest of the motor.
            
  • AFCO 80176 Electric Cooling Fan, 8 Inch S-Blade
    AFCO 80176 Electric Cooling Fan, 8 Inch S-Blade
    SKU-10680176
    x
                

    These fans offer the best CFM vs. AMP draw of any electric units we have tested. All fans are made from glass-filled nylon and are rated at zero static. Each fan is also reversible, so it can be used as a puller or pusher.

    To reverse the fan, the fan blade can be flipped or the wires can be reversed.

    Fan Features:

    • Low amp draw
    • Mount in front or rear of radiator
    • Thin design
    • Reversible - push/pull

    Catalog Correction: These fans DO NOT include an on/off switch.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Flex-A-Lite 31163 Temp Sensitive Variable Speed Control Fan Controller
    Flex-A-Lite 31163 Temp Sensitive Variable Speed Control Fan Controller
    SKU-35931163
    x
                
    • 45 amp rating
    • Senses coolant temperature via screw-in sensor (included)
    • Sets fan speed from 60% to 100% depending on built-in setting
    • Fan will run for 30 seconds after engine shut-off
    • Temp. range: 160°-220° F
    • 12 volt use only

    359-31163 Instructions (PDF)

  • Electric Fan Shroud w/ Two Fans, 25-28 Inch Tank-to-Tank x 21-24 Inch
    Electric Fan Shroud w/ Two Fans, 25-28 Inch Tank-to-Tank x 21-24 Inch
    SKU-9104213
    x
                

    If you want to get rid of the mechanical fan and go to an electric, this is the ticket. Made of .062" aluminum, these shrouds have a wide lip to allow you to trim and fit most applications. Measure your radiator core from the inside edge to the inside edge of the tanks and then measure the core the other way. (The tanks are not included in the measurement.) 

    Control and wiring sold separately.

    Fan Shroud Dimension Chart (GIF)

    910-4213 Instructions (PDF) 

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Dual 10 Inch Fan Shroud Combo, 21.75 W x 17.5 H
    Dual 10 Inch Fan Shroud Combo, 21.75 W x 17.5 H
    SKU-9174013
    x
                

    These universal fit dual fan/aluminum shroud assemblies fit many applications. Features heavy duty SPAL fans.

    Radiator/Shroud Style Guide

    917-4013 Diagram (PDF) 

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • AFCO 80179 Electric Cooling Fan, 14 Inch S-Blade
    AFCO 80179 Electric Cooling Fan, 14 Inch S-Blade
    SKU-10680179
    x
                

    These fans offer the best CFM vs. AMP draw of any electric units we have tested. All fans are made from glass-filled nylon and are rated at zero static. Each fan is also reversable, so it can be used as a puller or pusher.

    To reverse the fan, the fan blade can be flipped or the wires can be reversed.

    Fan Features:

    • Low amp draw
    • Rated at 1555 CFM
    • Mount in front or rear of radiator
    • Thin design
    • Reversible - push/pull

    Catalog Correction: These fans DO NOT include an on/off switch.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Offenhauser 3499 1945-1948 Flathead Fan Carrier Bracket
    Offenhauser 3499 1945-1948 Flathead Fan Carrier Bracket
    SKU-5603499
    x
                

    Aluminum fan carrier bracket fits 1945-1948 Flatheads with either stock intake manifold or Offy aluminum intakes with fan bracket provisions. Width of bracket where it mounts onto the manifold is 2-1/4".

    Mounting Chart (Part A in Chart)

  • AFCO 80180 Electric Cooling Fan, 12 Inch S-Blade
    AFCO 80180 Electric Cooling Fan, 12 Inch S-Blade
    SKU-10680180
    x
                

    These fans offer the best CFM vs. AMP draw of any electric units we have tested. All fans are made from glass-filled nylon and are rated at zero static. Each fan is also reversable, so it can be used as a puller or pusher.

    To reverse the fan, the fan blade can be flipped or the wires can be reversed.

    Fan Features:

    • Low amp draw
    • Up to 3000 CFM
    • Mount in front or rear of radiator
    • Thin design
    • Reversible - push/pull

    Catalog Correction: These fans DO NOT include an on/off switch.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Electric Fan Shroud, 25-28 In Tank-to-Tank x 17-20 In, 10 In Fan Holes
    Electric Fan Shroud, 25-28 In Tank-to-Tank x 17-20 In, 10 In Fan Holes
    SKU-91042015
    x
                

    If you want to get rid of the mechanical fan and go to an electric, this is the ticket. Made of .062" aluminum, these shrouds have a wide lip to allow you to trim and fit most applications. Measure your radiator core from the inside edge to the inside edge of the tanks and then measure the core the other way. (The tanks are not included in the measurement.) 

    25"-28" Tank-to-Tank x 17"-20" w/ Two 10" Fan Holes

    Fan Shroud Dimension Chart (GIF)

    Shrouds with built-in fans also available.

    Installation Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Nylon Flex Fan, 17 Inch
    $26.99
    Product Rating: 5.00 Stars
    Nylon Flex Fan, 17 Inch
    SKU-359417
    x
                

    One-piece nylon flex fan with reinforced construction for use up to 8000 RPM. Lightweight design (only 12 oz.) relieves stress on your water pump and bearings. Patented S-blade design provides maximum cooling and is ideal for race applications where weight is a concern.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Cooling Components CCI-1780 Cooling Machine Electric Fan, Style 80
    Cooling Components CCI-1780 Cooling Machine Electric Fan, Style 80
    SKU-91015682
    x
                At one time or another we all have had a car overheat. These fan/shroud combos are just the ticket to avoid having it happen again. These 2500 CFM pull-type fans measure 2-5/8" deep at the motor, 2-3/8" at the mounting brackets and 1-1/2" at the high impact shroud.
    • 26" wide x 20" high
    • Can be easily reduced in size to 23-1/4" wide x 18-1/2" high
    • 12 volt operation
    • Lower engine operating temperatures
    • Saves horsepower
    • Better fuel mileage
    • Constructed of high-impact ABS material

    Note:  This fan motor requires the use of a 70 amp or larger relay.

    Fan Application Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Speedway 6 Volt Electric Cooling Fan
    From: $99.99
    Product Rating: 4.25 Stars
    Speedway 6 Volt Electric Cooling Fan
    SKU-910151
    x
                
    Help your vintage engine keep cool by adding an electric cooling fan to your radiator. Electric fans are far more efficient than mechanical engine driven fans because they free up horsepower and only run when you want them to (when used with a fan controller, not included). Plus, most electric fans can be mounted ahead of the radiator or behind the radiator, with the more efficient location being on the engine side of the radiator.
     
    These powerful electric fans work with 6-volt electrical systems and draw 6 to 10 amps, depending on the size. The fan is supplied as a "puller" to mount behind the radiator, but it can be changed to a "pusher" by reversing the wires, flipping the fan blade and mounting in front of the radiator.
    • Available in 12", 14" or 16" diameters
    • Fans have 10 straight blades
    • High impact plastic construction
    • Sealed ball bearings for long life
    • Can push or pull
    • Works with positive or negative ground systems
    • Includes mounting ears (straps not included)

    For best results, be sure that your generator supplies enough current to power the fan. If it does not, check out our 6 Volt Alternator 91067169. It supplies additional current at idle to run electric accessories

  • Universal Water Pump Shim Kit
    Universal Water Pump Shim Kit
    SKU-54564035
    x
                

    Water pump pulley shim kit provides proper drive belt alignment with pulleys.  Kit contains two aluminum 1/16" spacer and one 1/8" spacer.

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump

Goto Previous PagePrevious Page
1 2 3