Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 4

Classic Truck

Browse our wining racing and performance auto parts.

MORE
Classic Truck
X

Shop Classic Truck Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the best names in classic truck carburetors and intake manifolds! Plus, we have a great selection of fuel cells and gas pedals, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N and R2C. Speedway can fuel your need for speed!

Classic Truck, Carburetors

Products
Featured Products
  • On Sale
    No Reviews
    $407.95 $366.99
    Quick View Details
    x
                
    WICKED POWER! This black Street Demon™ redefines the street carburetor with clean looks and ease of use! The Street Demon offers enthusiasts a straightforward four barrel carburetor designed to deliver a stable idle, amazingly crisp throttle response and smooth performance. Its optimized calibration and dual mounting pattern make it Run–Ready™ for a large variety of engines and vehicles!
    • 625 CFM airflow - ideal for use on most stock to mildly modified V8s
    • Dual mounting bolt pattern - fits any street 4bbl intake (square flange or spread bore)
    • Electric Choke Management means easy cold starts
    • Single fuel inlet for simple installation
    • Aerospace Composite fuel bowl offers significant heat insulation benefits over aluminum fuel bowl - keeps fuel up to 20° cooler for optimum performance with modern fuels
    • Integrated fuel bowl/main body design with gasket above fuel level and no plugged passages to eliminate all potential leak paths
    • Small 1-3/8" primary throttle bores combined with proven Triple-Stack™ boosters deliver amazingly crisp throttle reponse and drivability, superior fuel atomization and improved fuel economy
    • Goggle Valve Secondary (GVS™) throttle plate delivers over twice the aire flow of the primary bores for power you can hear and feel
    • GVS™ makes total air flow 625 CFM while maintaining the crisp throttle response delivered by small primary bores
    • Secondary air valve control - torsion spring valve control/adjustment permits seamless primary to secondary throttle response regardless of the throttle opening rate (unique contoured profile developed for better cylinder to cylinder fuel distribution)
    • Smooth styling - patented timeless design fits modern as well as traditional themed vehicles (Patent No.: US D648,746 S)
    • Developed from the ground up with great looks and ease of use in mind
    • Easy to clean and maintain
    • One-piece air horn assembly
    • 2 Stage metering rods control easily accessible without carburetor disassembly or removal
    • 4 optional vacuum step-up springs available to dial in hi-end performance
    • Optional sets of metering rods available to refine calibration
    • Multiple primary and secondary main jet orifice sizes available
    • Patent pending mechanical design
    • Integrated 700R4/200R4 transmission kickdown cable mounting location for proper shifts
    • Ford A/T kickdown(does not work with AOD transmissions)
    • Available TPS kit allows use with 4L60 and 4L80 transmissions
    Go to Product Page
  • Product Rating: 4.50 Stars
    $299.99
    Quick View Details
    x
                

    Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

    There have been numerous attempts to reproduce this unit, with little success. "Speedy" Bill Smith of Speedway Motors in Lincoln, Nebraska, took on the challenge to make a great product even better. The 9 Super 7 ® Carb brings this reproduction of the original Stromberg 97 2 barrel carb into the 21st Century!

    Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the choke assembly, accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result! 

    Aesthetically, the 9Super7 is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

    The other similarity that the 9 Super 7 shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Be sure to include the Secondary 9 Super 7 when installing multi-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

    On the primary 9 super 7 carb the throttle shaft extends from carb body .983" and has the hole on the end to pin the linkage. There is a brass sleeve that the throttle shaft rotates in that extends from the carb body .400 and this leaves the useable throttle shaft length of .583. There is sufficient room for progressive linkage and the manual throttle linkage that rotates over the sleeve.

    • All-new tooling for crisp, flawless castings
    • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
    • Stainless steel screws and hardware
    • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
    • Features original Stromberg 0.97" venturi diameter
    • Modern Nitrophyl float and Neoprene gaskets
    • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
    • Will not stick or dribble like the old Viton-tipped needle and seat setups
    • Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
    • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
    • Extended brass throttle shaft to simplify multi-carb linkage

    915-11655 9 Super 7® Carb Instructions (PDF)

    Note: Not recommended for use with Ethanol fuels.

     

    Go to Product Page
  • Product Rating: 4.40 Stars
    $319.99
    Quick View Details
    x
                

    Edelbrock Performer Series 4 barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, this Edelbrock carb is the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    CALIBRATED FOR FUEL ECONOMY
    Designed for small-block and small displacement big-block engines, this four barrel carb is recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets Primary .098, Secondary .095; Metering Rods .075 x .047; Step-Up Spring yellow (4" Hg). Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    • Easy to tune with great driveability
    • 600 CFM
    • Electric choke
    • Ford/Mopar arms sold separately

    Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

    Go to Product Page
  • On Sale
    Product Rating: 5.00 Stars
    $294.99 $289.99
    Quick View Details
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance 4 barrel carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock parts are proudly made in the U.S.A.  

    This 600 CFM 4 barrel carburetor is designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design. Includes manual choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

     

    Go to Product Page
  • On Sale
    No Reviews
    $435.95 $391.99
    Quick View Details
    x
                
    WICKED POWER! This black Street Demon™ redefines the street carburetor with clean looks and ease of use! The Street Demon offers enthusiasts a straightforward four barrel carburetor designed to deliver a stable idle, amazingly crisp throttle response and smooth performance. Its optimized calibration and dual mounting pattern make it Run–Ready™ for a large variety of engines and vehicles!
    • 750 CFM air flow - ideal for use on most stock to mildly modified V8s
    • Dual mounting bolt pattern - fits any street 4bbl intake (square flange or spread bore)
    • Electric Choke Management means easy cold starts
    • Single fuel inlet for simple installation
    • Integrated fuel bowl/main body design with gasket above fuel level and no plugged passages to eliminate all potential leak paths
    • Small 1-3/8” primary throttle bores combined with proven Triple-Stack™ boosters deliver amazingly crisp throttle response and drivability, superior fuel atomization and improved fuel economy
    • Goggle Valve Secondary (GVS™) throttle plate delivers over twice the air flow of the primary bores for power you can hear and feel
    • GVS™ makes total air flow 750 CFM while maintaining the crisp throttle response delivered by small primary bores
    • Secondary air valve control - torsion spring valve control/adjustment permits seamless primary to secondary throttle response regardless of the throttle opening rate (unique contoured profile developed for better cylinder to cylinder fuel distribution)
    • Smooth styling - patented timeless design fits modern as well as traditional themed vehicles
    • Developed from the ground up with great looks and ease of use in mind
    • Easy to clean and maintain
    • One-piece air horn assembly
    • 2 Stage metering rods control easily accessible without carburetor disassembly or removal
    • 4 optional vacuum step-up springs available to dial in hi-end performance
    • Optional sets of metering rods available to refine calibration
    • Multiple primary and secondary main jet orifice sizes available
    • Patent pending mechanical design
    • Integrated 700R4/200R4 transmission kickdown cable mounting location for proper shifts
    • Ford A/T kickdown (does not work with AOD transmissions)
    • Available TPS kit allows use with 4L60 and 4L80 transmissions

    Street Demon 750 CFM 4 Barrel Carburetor Installation Instructions (PDF) 

    Specs Sheet (Link)

    Go to Product Page
  • On Sale
    Product Rating: 5.00 Stars
    $304.99 $299.99
    Quick View Details
    x
                

    Edelbrock Performer Series 4 barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance four barrel carb to top off your hot rod, the Edelbrock Performer Series 4 barrel carbs are the best choice for performance and value. All Edelbrock parts are proudly made in the U.S.A.  

    This 500 CFM four barrel carburetor is designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Includes manual choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    • Manual choke 
    • Bolt-on-and-run performance right out of the box
    • Smooth throttle response throughout the power band
    • Uses metering rods to transition between circuits - rods can be changed in seconds without carburetor removal or draining fuel
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation 
    • Lightweight all-aluminum body is compatible with gasohol and blended fuels
    • Includes both timed and full vacuum ports for ignition advance

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

    Go to Product Page
  • Product Rating: 5.00 Stars
    $354.99
    Quick View Details
    x
                This 500cfm 4412CT Holly carb shares the hugely  successful features of the original 4412C but with a couple changes  aimed for circle track cars. The choke has been removed but the horn  remains and has been specially calibrated for circle track use. The  4412C Holley carb is easily the most winningest two barrel carburetor on the market  and comes out of the box ready to run. 

    Features:
    • Choke delete
    • Choke horn remains
    • 50cc accelerator pump
    • 1 timed (spark) port, 1 full vacuum, & 1 PCV port
    • The mandated carbs for many oval track racing sanctioning bodies
    • Calibrated specifically for circle track use
    Go to Product Page
  • Product Rating: 5.00 Stars
    $549.99
    Quick View Details
    x
                

    Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

    There have been numerous attempts to reproduce this unit, with little success. "Speedy" Bill Smith of Speedway Motors in Lincoln, Nebraska, took on the challenge to make a great product even better. The 9 Super 7 ® Carb brings this reproduction of the original Stromberg 97 2 barrel carb into the 21st Century!

    Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the choke assembly, accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result! 

    Aesthetically, the 9Super7 is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

    The other similarity that the 9 Super 7 shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Be sure to include the Secondary 9 Super 7 when installing multi-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

    On the primary 9 super 7 carb the throttle shaft extends from carb body .983" and has the hole on the end to pin the linkage. There is a brass sleeve that the throttle shaft rotates in that extends from the carb body .400 and this leaves the useable throttle shaft length of .583. There is sufficient room for progressive linkage and the manual throttle linkage that rotates over the sleeve.

     

    • All-new tooling for crisp, flawless castings
    • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
    • Stainless steel screws and hardware
    • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
    • Features original Stromberg 0.97" venturi diameter
    • Modern Nitrophyl float and Neoprene gaskets
    • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
    • Will not stick or dribble like the old Viton-tipped needle and seat setups
    • Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
    • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
    • Extended brass throttle shaft to simplify multi-carb linkage
    • Perfect for use with our dual carb intake manifolds for Ford Flatheads

    915-11655 9 Super 7® Carb Instructions (PDF)

    Note: Not recommended for use with Ethanol fuels.

     

    Go to Product Page
No Reviews
$389.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
Product Rating: 5.00 Stars
$421.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
No Reviews
$525.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
Garage Sale
No Reviews
$334.99 $269.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
No Reviews
$418.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
Product Rating: 5.00 Stars
$469.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
On Sale
No Reviews
$369.99 $346.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
Garage Sale
No Reviews
$399.99 $299.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
On Sale
No Reviews
$344.99 $339.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
Product Rating: 5.00 Stars
$341.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
No Reviews
$633.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
On Sale
No Reviews
$314.99 $309.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
No Reviews
$421.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
Product Rating: 4.70 Stars
$439.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
Product Rating: 4.50 Stars
$299.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
No Reviews
$854.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
No Reviews
$499.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
Product Rating: 5.00 Stars
$379.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
No Reviews
$421.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
On Sale
No Reviews
$379.99 $374.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
Garage Sale
No Reviews
$1,149.99 $949.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
No Reviews
$763.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
On Sale
Product Rating: 5.00 Stars
$294.99 $289.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
Garage Sale
No Reviews
$499.99 $399.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
Product Rating: 4.30 Stars
$799.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
On Sale
Product Rating: 5.00 Stars
$479.99 $466.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
Product Rating: 5.00 Stars
$334.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
No Reviews
$899.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
On Sale
No Reviews
$435.95 $391.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
No Reviews
$874.99
In Stock In Stock
This part is in stock.
In Stock
|
Same Day Same Day Shipping
Same day shipping available on this part if you order before 6PM CST.
Same Day
Page 1 of 4