Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the best names in classic truck carburetors and intake manifolds! Plus, we have a great selection of fuel cells and gas pedals, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N and R2C. Speedway can fuel your need for speed!

"Classic Truck, Carburetion" Page 1 of 15

  • Lokar S-68156 5/16-24 Inch Thread Rod End w/Nut, Pair
    Lokar S-68156 5/16-24 Inch Thread Rod End w/Nut, Pair
    SKU-491S68156
    x
                
    • Rod Ends
    • Made In The U.S.A.
    • Lifetime Warranty
  • Lokar XSRK-4001 Black Stainless Steel Carburetor Bracket
    Lokar XSRK-4001 Black Stainless Steel Carburetor Bracket
    SKU-49104001
    x
                

    Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads.  Design provides improved clearance on Edelbrock carbs. Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.

    • Mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads
    • Stainless steel
    • Improved clearance on Edelbrock carbs
    • Includes tension screw to prevent bracket movement under extreme pressure

    49104001 Installation Instructions (PDF) 

  • Lokar TRP-4005 Stainless Pontiac Tri-Power Throttle Cable Bracket Kit
    Lokar TRP-4005 Stainless Pontiac Tri-Power Throttle Cable Bracket Kit
    SKU-491TRP4005
    x
                

    Designed for Rochester Tri-Power. Kit includes Stainless Steel Throttle Cable Bracket and Stainless Steel Springs.

    • Stainless bracket mounts under rear carburetor on Rochester 3-2 set-up.
    • Cables operate from center carburetor.
    • Stainless Bracket and Dual Stainless Springs are used to mount Lokar's Throttle Cable and Kickdown assemblies.
  • Lokar TC-1000TP72 Tuned-Port 1985-91/LT1/LT4 Hi-Tech Throttle Cable
    Lokar TC-1000TP72 Tuned-Port 1985-91/LT1/LT4 Hi-Tech Throttle Cable
    SKU-491TC1000TP72
    x
                
    • Specially Extruded Liner For Extended Cable Life
    • Aluminum Ferrules To Eliminate Fraying
    • U-Cut-To-Fit Outer Housing
    • Clevis Designed w/o Cotter Pins Or Set Screws
    • Adapts To Factory And Aftermarket Pedals
    • Made In The U.S.A.
    • Lifetime Warranty
  • Lokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inch
    Lokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inch
    SKU-4911000160
    x
                Lokar Hi-Tech Throttle Cable features a stainless   steel braided  housing.  They are designed with a specially extruded liner for extended    life of the cable – not to be confused with ordinary braided brake    hose.  Cables are equipped with aluminum fittings and aluminum ferrules    to eliminate fraying.
    Kits come complete with installation instructions.
  • Lokar TCP-1000TPVU Polished Universal 36 Inch Vortec Throttle Cable
    Lokar TCP-1000TPVU Polished Universal 36 Inch Vortec Throttle Cable
    SKU-491TCP1000TPVU
    x
                

    Looking for more shine in your engine compartment? Try Lokar's Polished Hi-Tech Throttle Cables. Lokar's polished cables are available in stainless steel braided housing or black housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose.

    • Cables are equipped with polished aluminum fittings and polished aluminum ferrule to eliminate fraying.
    • "U-Cut-to-Fit" outer housing is available in 24" or 36" lengths with a "U-Cut-to-Fit" stainless inner wire.
    • Clevis is designed without cotter pins or set screws.
    • Adapts to factory and aftermarket pedals.
    • Cables mount nicely with Lokar's array of Bracket and Return Springs (sold separately).
    • Kits complete with installation instructions.
    • Pair up with a Polished Kickdown
  • Lokar XTCB-40RJ1 Midnight Series 502 Ram Jet Throttle Cable Bracket
    Lokar XTCB-40RJ1 Midnight Series 502 Ram Jet Throttle Cable Bracket
    SKU-491XTCB40RJ1
    x
                
    • Brackets fit the GM ramjet engine.
    • These brackets along with Lokar Throttle Cables will allow the ramjet to work properly in any vehicle.
    • When used with an automatic transmission, be sure to use the transmission specific Lokar Kickdown Cable.
    • Uses TC-1000RJ throttle cable.
  • Holley 0-80670 Avenger 670 CFM 4 Barrel Carburetor, Electric Choke
    Holley 0-80670 Avenger 670 CFM 4 Barrel Carburetor, Electric Choke
    SKU-42580670
    x
                

    The Holley Street Avenger Model 4150 four barrel carb is the ultimate vacuum secondary street performance upgrade. This 4 barrel carb is street ready right out of the box and features a calibrated electric choke, air and fuel adjustments and built in fuel filters. There are clear sights for easy float adjustments, adjustable vacuum secondaries and four vacuum ports. Plus it has a million mile power valve, is 100% wet flow tested and includes fittings.

    • No Trouble quick change vacuum secondaries - up to 6% more acceleration or 5% better fuel economy with simple spring change (springs included) 
    • Vacuum secondaries allow use on wide variety of vehicles
    • Tuneable fuel metering system
    • Dual feed fuel inlet
    • 1 timed (spark) port, 2 full vacuum, and 1 PCV port
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • Calibrated for monster low-end torque, awesome acceleration, & unmatched top-end horsepower
    • Bolt on & go design
    • Electric choke

    Holley 670 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Speedway Aluminum Fuel Log for Demon Carburetor
    Speedway Aluminum Fuel Log for Demon Carburetor
    SKU-91011600
    x
                

    Ensures adequate fuel pressure to carburetor and helps eliminate fuel starvation problems. Fuel pressure is regulated after carburetor has been supplied and not before. Must use return fuel line to take full advantage of benefits.

    Features AN8 inlet and two AN8 outlets.  Threaded 3/4" NPT (plugged) on back that can be used for a return line. Also has 1/8" NPT outlet for fuel pressure gauge, fittings sold separately. 

  • Edelbrock 14064 Endurashine Performer 600 CFM 4 BBL Carb, Electric
    Edelbrock 14064 Endurashine Performer 600 CFM 4 BBL Carb, Electric
    SKU-32514064
    x
                Please view the product's page for more information
            
  • Fuelab 52501-1 EFI Fuel Pressure Regulator, 25-90 PSI
    Fuelab 52501-1 EFI Fuel Pressure Regulator, 25-90 PSI
    SKU-96052501
    x
                

    Gasoline, methanol, ethanol, and dieselfuel compatible for fuel injected applications. Accepts port style and non-port style union fittings without interference. Also features two 1/8” NPT gauge ports for an external pressure gauge and pressure reference. Fine thread pitch on adjustment screw for precise pressure adjustment.

    • Includes stainless steel mounting bracket
    • One -6AN inlet and one -6AN return port in-line
  • Proform 67160C Trackside Carburetor Spacer Kit, 1 Inch Thick
    Proform 67160C Trackside Carburetor Spacer Kit, 1 Inch Thick
    SKU-58667160
    x
                

    Easily optimize your flow rates with the new PROFORM modular 1" carb spacer kit! Each kit comes with one frame and 3 popular inserts: open, 4-hole, and tapered 4-hole. Various engine combinations have various fuel and air distribution requirements for maximum performance. Lightweight heat-resistant phenolic. Also includes stud kit and gaskets.

    • Modular 1" carb spacer kit
    • Comes with one frame and 3 popular inserts: open, 4-hole, and tapered 4-hole
    • Lightweight heat-resistant phenolic
    • Includes stud kit and gaskets
    • Fits 4 barrel carburetors
    • Made in the U.S.A.
  • Lokar TC-1000EFI184 Hi-Tech Ford EFI Throttle Cable Kit, 84 Inch, Blk
    Lokar TC-1000EFI184 Hi-Tech Ford EFI Throttle Cable Kit, 84 Inch, Blk
    SKU-491TC1000EFI84
    x
                
    • Specially Extruded Liner For Extended Cable Life
    • Aluminum Ferrules To Eliminate Fraying
    • U-Cut-To-Fit Outer Housing
    • Clevis Designed w/o Cotter Pins Or Set Screws
    • Adapts To Factory And Aftermarket Pedals
    • Made In The U.S.A.
    • Lifetime Warranty
  • Ford/Holley 94 Primary Carb Throttle Plate
    Ford/Holley 94 Primary Carb Throttle Plate
    SKU-91011625
    x
                

    About the only way your 94 could have a tight throttle would be if you found a NOS carb somewhere. Using old worn throttle plates make carbs sluggish and increases your idle speed. Our aluminum throttle plates are for those carbs with out-of-round butterflies.

    • Fits both Ford 94 and Holley 94 two barrel carburetors
    • Featues a stock 5 degree angle for use in the primary carb in a multi-carb set up
    • The 5 degree plates are used anywhere you're using your idle circuits

    Note: Screws not included (sold separately with extended throttle shafts).

  • Lokar XTCB-40TP2 Midnight Series Tuned-Port Alum Bracket w/Double Stud
    Lokar XTCB-40TP2 Midnight Series Tuned-Port Alum Bracket w/Double Stud
    SKU-491XTCB40TP2
    x
                
    • The billet aluminum bracket mounts to the side of the Tuned-Port plenum.
    • The billet aluminum bracket is available with a double stud for throttle and kickdown
  • Lokar TCB-40TP1 Tuned-Port Billet Aluminum Bracket w/Single Stud
    Lokar TCB-40TP1 Tuned-Port Billet Aluminum Bracket w/Single Stud
    SKU-491TCB40TP1
    x
                

    The billet aluminum bracket mounts to the side of the Tuned-Port plenum. The billet aluminum bracket is available with:

    • a single stud for throttle only
    • double stud for throttle and kickdown
    • triple stud for a throttle, kickdown and cruise control cable.
  • Lokar TCP-1000LS148 GM LS1 Hi-Tech Throttle Cable Kit, 48 Inch, Pol.
    Lokar TCP-1000LS148 GM LS1 Hi-Tech Throttle Cable Kit, 48 Inch, Pol.
    SKU-491TCP1000LS148
    x
                
    • Specially Extruded Liner For Extended Cable Life
    • Aluminum Ferrules To Eliminate Fraying
    • U-Cut-To-Fit Outer Housing
    • Clevis Designed w/o Cotter Pins Or Set Screws
    • Adapts To Factory And Aftermarket Pedals
    • Made In The U.S.A.
    • Lifetime Warranty
  • Three-Bolt Carb Base Gasket
    $1.99
    Three-Bolt Carb Base Gasket
    SKU-91011050
    x
                Three bolt carburetor base gaskets fit Stromberg 97-style carbs and Holley 94-style carbs.
            
  • Stromberg 97 Primary Base Assembly
    Stromberg 97 Primary Base Assembly
    SKU-91011690
    x
                Where else can you buy brand new Stromberg 97 base assemblies? We now offer you new bases complete with new shafts, butterflies, and linkage. 

    This base for the primary carb location.
  • Lokar XTCB-PLR3 Midnight Series Linkage, Holley Carb, 8-1/4 - 8-5/8
    Lokar XTCB-PLR3 Midnight Series Linkage, Holley Carb, 8-1/4 - 8-5/8
    SKU-491XTCBPLR3
    x
                
    • Progressive Linkage for in-line dual carburetors
    • Design allows the use of only one carb during normal driving conditions and both carburetors at wide open throttle
    • Available in Midnight Series™
  • Lokar TCB-40SD3 Billet Aluminum Street Demon Bracket for TPS/Cruise
    Lokar TCB-40SD3 Billet Aluminum Street Demon Bracket for TPS/Cruise
    SKU-491TCB40SD3
    x
                Throttle/Kickdown Cable Mounting Bracket for Street Demon Carburetors. The Lokar Billet Aluminum Throttle/Kickdown Cable Mounting Bracket for Street Demon Carburetors is CNC machined from 6061-T6 billet aluminum. It provides easy installation of Lokar's Throttle and Kickdown Cables. The product features dual stainless steel return springs and comes recommended by Holley.
  • Moroso 64945 Phenolic Insulating Carb Spacer for Holley 390
    Moroso 64945 Phenolic Insulating Carb Spacer for Holley 390
    SKU-54564945
    x
                

    Phenolic material is a type of plastic resin which has excellent insulating properties, so it will keep the fuel in your 4 barrel Holley 4150/4160 cooler for more power. For 390 CFM carbs with 1.467" diameter bores.

    • Specially formulated material reduces heat conductivity 10 times greater than aluminum
    • Reduces fuel temperature inside the carburetor
    • Denser, more powerful fuel charge to the manifold
    • 4 hole plenum design
    • 1/2" height
    • Gaskets not included
  • Lokar TC-1000TP84 Tuned-Port 1985-91/LT1/LT4 Hi-Tech Throttle Cable
    Lokar TC-1000TP84 Tuned-Port 1985-91/LT1/LT4 Hi-Tech Throttle Cable
    SKU-491TC1000TP84
    x
                
    • Specially Extruded Liner For Extended Cable Life
    • Aluminum Ferrules To Eliminate Fraying
    • U-Cut-To-Fit Outer Housing
    • Clevis Designed w/o Cotter Pins Or Set Screws
    • Adapts To Factory And Aftermarket Pedals
    • Made In The U.S.A.
    • Lifetime Warranty
  • Stewart Warner 280ED-F Electric Temperature Gauge Sender-100-280 Deg.
    Stewart Warner 280ED-F Electric Temperature Gauge Sender-100-280 Deg.
    SKU-665280ED
    x
                

    Operates one gauge only. Sender has 1/8" NPTF threads and includes adapters for 1/4", 3/8" and 1/2" pipe threads. 5/8" hex size.

  • Lokar TC-1000MOD84 Ford MOD 4.6/5.4 V8 Hi-Tech Throttle Cable, 84 Inch
    Lokar TC-1000MOD84 Ford MOD 4.6/5.4 V8 Hi-Tech Throttle Cable, 84 Inch
    SKU-491TC1000MOD84
    x
                
    • Specially Extruded Liner For Extended Cable Life
    • Aluminum Ferrules To Eliminate Fraying
    • U-Cut-To-Fit Outer Housing
    • Clevis Designed w/o Cotter Pins Or Set Screws
    • Adapts To Factory And Aftermarket Pedals
    • Made In The U.S.A.
    • Lifetime Warranty
  • Late Carburetor Adapter
    $24.99
    Product Rating: 4.00 Stars
    Late Carburetor Adapter
    SKU-5605159
    x
                

    Bolt a newer type 4-bolt carb (3-1/4" x 1-7/8", like Rochester 2GC) to an early 3-bolt manifold. Aluminum casting.

    560-5159 Instructions (PDF)

  • Edelbrock 14073 Performer 4 Barrel Carb, 750 CFM, Manual Choke, Black
    Edelbrock 14073 Performer 4 Barrel Carb, 750 CFM, Manual Choke, Black
    SKU-32514073
    x
                Please view the product's page for more information
            
  • Edelbrock 18064 Endurashine AVS 4 Barrel Carb, 650 CFM, Electric Choke
    Edelbrock 18064 Endurashine AVS 4 Barrel Carb, 650 CFM, Electric Choke
    SKU-32518064
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted, in seconds, to suit your application - no extra parts required to achieve optimum performance. Also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Two-piece design means no gaskets below the fuel level for leak-free operation

    Edelbrock 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

    Top It Off Rebate (PDF) 

  • Mr Gasket 97 Carburetor Insulator Plate, Holley/AFB Carbs, 1/4 Inch
    Mr Gasket 97 Carburetor Insulator Plate, Holley/AFB Carbs, 1/4 Inch
    SKU-55097
    x
                These Mr Gasket Heat Dissipator carburetor insulator gaskets are  top notch when it comes to eliminating the heat transfer from your  intake to your carb. The heavy-duty gaskets are made of heat absorbing gasket material separated by layers of aluminum alloy.
    • For Holley/AFB/Edelbrock carburetors
    • 1/4" thick
    • 4-hole opening
  • AFCO 10174 Carburetor Bushings, Pair
    $10.99
    $11.99
    AFCO 10174 Carburetor Bushings, Pair
    SKU-10610174
    x
                AFCO Throttle Rod Components
            
  • Lokar XDP-1000HT36 Midnight Series Duo-Pak Hi-Tech Throttle Cable Kit
    Lokar XDP-1000HT36 Midnight Series Duo-Pak Hi-Tech Throttle Cable Kit
    SKU-491XDP1000HT36
    x
                Features stainless steel housing and throttle cable and springs. Easy installation. All hardware and detailed instructions included. Made in the U.S.A. Lifetime warranty.
    • Duo-Pak Hi-Tech Throttle
    • Stainless Steel Housing
    • Stainless Steel Throttle Cable And Springs
    • Easy Installation
    • All Hardware And Detailed Instructions Incl.
    • Lifetime Warranty
  • Holley 34-25 Quick Change Primary Float Bowl
    Holley 34-25 Quick Change Primary Float Bowl
    SKU-4253425
    x
                Update your Holley 4150/4160 carb with quick change float bowls. Includes gaskets and plugs. For center hung float bowl. Also includes jet driver. 

    NOTE: Primary and secondary bowls are not interchangeable!

    425-3425 Instruction Sheet (PDF)

  • Lokar XTCB-40EFI Midnight Series Ford EFI Throttle Bracket 86-93, EGR
    Lokar XTCB-40EFI Midnight Series Ford EFI Throttle Bracket 86-93, EGR
    SKU-491XTCB40EFI
    x
                
    • Ford EFI Bracket fits 1986 to 1993, Ford 302, and 351 electronic fuel injection systems that have installed the Mustang EGR spacer.
    • This Stainless Bracket mounts in stock location for easy installation of our Kickdown Cables and Throttle Cables.
    • (1986 to 1993 uses TC-1000HT)
    • The EFI Bracket does not fit B.A.P. throttle bodies.
  • Demon Carb 1903 Street Demon 750 CFM 4 Bbl Carburetor, Ball Brnshd Alu
    Demon Carb 1903 Street Demon 750 CFM 4 Bbl Carburetor, Ball Brnshd Alu
    SKU-91012014
    x
                Please view the product's page for more information
            
  • Holley Carburetor Gas Needle and Seat, .110 Inch
    Holley Carburetor Gas Needle and Seat, .110 Inch
    SKU-4276504
    x
                "Viton" needle and seat is resistant to dirt and provides superior seal when closed. Size .110" for gas carbs. Gasket not included. 
            
  • Lokar TC-1000LS172 Hi-Tech GM LS1 Throttle Cable Kit, 72 Inch Long
    Lokar TC-1000LS172 Hi-Tech GM LS1 Throttle Cable Kit, 72 Inch Long
    SKU-491TC1000LS172
    x
                
    • Specially Extruded Liner For Extended Cable Life
    • Aluminum Ferrules To Eliminate Fraying
    • U-Cut-To-Fit Outer Housing
    • Clevis Designed w/o Cotter Pins Or Set Screws
    • Adapts To Factory And Aftermarket Pedals
    • Made In The U.S.A.
    • Lifetime Warranty
Goto Previous PagePrevious Page
1 2 3 4 5 ... 15