Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors has high performance classic truck engine parts at everyday low prices. Whether you are building a Small Block Chevy or Ford Flathead, Speedway has you covered with thousands of parts in stock, ready to ship. With everything from pison sets to camshafts, Speedway can feed your need for speed! Complete classic pickup truck crate engines of multiple sizes, like Chevy 305, 350, 383 and others, are available at great prices! We also have a large selection of cylinder heads, crankshafts and roller rocker arms, so make Speedway your classic truck performance engine solution.

"Classic Truck, Camshaft and Valvetrain" Page 1 of 11

  • Rocker Arm Balls for 7/16 Inch Stud
    Rocker Arm Balls for 7/16 Inch Stud
    x
                Replacement rocker arm pivot balls with oil slots. Comes in a set of 16 for use with 7/16" rocker arm studs.
            
  • 1932-1953 Flathead Ford V8 Single Valve Springs
    1932-1953 Flathead Ford V8 Single Valve Springs
    x
                

    Our complete line of valve train parts to help your flathead Ford V8 run on unleaded fuel. These heavy duty single valve springs are made from top-quality chrome silicon steel and are designed to work with stock 1932-1953 Ford retainers. 

    • Recommended for most street performance 1932-53 Ford/Mercury Flathead V8s
    • Chrome silicon material delivers reliable performance
    • Proper seat pressure for most street and street/strip Flathead cams
    • Installed Height:  2.00"
    • Seat Pressure:  85 lbs @ 2.00" installed height

    Note: "Full Race" cams should be paired with our 450-4005 dual valve springs.

    Flathead Valve Assembly (Link)

     

  • Flathead Lifter Wrench
    $9.99
    Product Rating: 4.25 Stars
    Flathead Lifter Wrench
    x
                

    Use this handy wrench to set your flathead's adjustable lifters.  For use with our 450-F8502 lifters.

  • Chevy Front Timing Cover Chrome Bolt Kit
    Chevy Front Timing Cover Chrome Bolt Kit
    x
                Chevy front timing cover chrome bolt kit. 
            
  • Hastings VA101 Isky Flathead Ford Valve Spring Shims
    Hastings VA101 Isky Flathead Ford Valve Spring Shims
    x
                

    These Hastings valve spring shims are designed for use with our single valve springs (450185G).  These shims will help you achieve the correct installed height for your valve springs when rebuilding Flathead Ford engines.

    • 0.060" thick
    • Designed for use with 185G springs
    • Allows for correct valve spring height
    • Set of 16 shims
  • 429/460 Ford Pushrod Guide Plates, 5/16 Inch
    429/460 Ford Pushrod Guide Plates, 5/16 Inch
    x
                If your engine has non-adjustable rockers and you are switching to our high performance rockers, you will need to use these guide plates and studs. Machining may be required. 
            
  • Mr Gasket 1591 Timing Tape, 8 Inch Balancer
    Mr Gasket 1591 Timing Tape, 8 Inch Balancer
    x
                A convenient way to avoid the expense of having the harmonic balancer degreed. This timing tape is precisely accurate in calibration. Use it for accurate timing, setting valve lash or when degreeing the harmonic balancer. For S/B & B/B Chevy V8 engines.
            
  • Isky Racing Cams F85-02 Adjustable Flathead Ford Lifters
    Isky Racing Cams F85-02 Adjustable Flathead Ford Lifters
    x
                

    Isky's adjustable lifters are the preferred way to maintain critical valve train tolerances while avoiding the hassle of grinding your valve seats for clearance. Simply set your valve lash using the adjustable set screw.

    Made in the USA. Fits 1932-53 Ford and Mercury Flathead V8s.

  • Isky Racing Cams 211100 Max-1 1932-48 Flathead Ford Camshaft
    Isky Racing Cams 211100 Max-1 1932-48 Flathead Ford Camshaft
    x
                

    Isky’s Max-1 is by far the best camshaft we have found for the vast majority of all flathead V8-powered street rods. It offers a great hot rod sound without sacrificing street manners, and provides good low-speed power with both stock and multi-carb intake manifolds.

    Cam Application Chart (GIF)

    450-211100 Specs (Link)

  • Flathead Ford Valve Guide Retainer Clips
    Flathead Ford Valve Guide Retainer Clips
    x
                Fits 1932-53 engines. If using in a 1932-48 engine, you will have to use 1949-53  style retainers, keepers and valves.
            
  • Camshaft Lockplate and Bolt Kit
    Camshaft Lockplate and Bolt Kit
    x
                

    Camshaft lock plate with three grade 8 cam bolts.  V8 and V6 Chevy.

    Bolts are 5/16-18 X 7/8 USS Course Grade 8

  • COMP Cams CL12-212-2 S/B Chevy Magnum Cam & Lifter Kit, 2000-6000 RPM
    COMP Cams CL12-212-2 S/B Chevy Magnum Cam & Lifter Kit, 2000-6000 RPM
    x
                

    These COMP Cams camshaft and lifter kits are just the ticket whether it's for a daily driver or hot street machine. These "CL" kits include new camshaft, new hydraulic lifters and camshaft lube.

    Great for street machines. Needs stall, headers and gears. Rough idle.

    Application Chart (GIF)

    282-122122 Specs (PDF)

  • Stock Small Block Chevy Rocker Arm Pivot Balls
    Stock Small Block Chevy Rocker Arm Pivot Balls
    x
                Stock style small block Chevy rocker arm balls are heat treated and grooved for improved oiling. For stock 3/8" diameter studs. Set of 16.
            
  • Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.5:1, 3/8 Stud
    Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.5:1, 3/8 Stud
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    • 4340 steel rocker body
    • Adds up to 30 HP over stock rockers
    • Excellent replacement for stock or sportsman engines
    • Eliminates noise & slop associated with worn or high mileage rockers
    • Includes polylocks and grooved balls
  • Offenhauser 1949-53 Flathead Ford Aluminum Timing Gear
    Offenhauser 1949-53 Flathead Ford Aluminum Timing Gear
    x
                

    Replace your flathead Ford V8's weak original "fiber" timing chain gear with this superior, aluminum cam gear. It lasts longer and withstands high performance cam/valve spring loads with ease.

  • Screw-In Rocker Studs, 3/8 Inch
    Screw-In Rocker Studs, 3/8 Inch
    x
                

    3/8" Chromoly steel. For use without guide plates. Simply tap boss 7/16"-14 and screw in the studs.

    Complete set of 16 studs.

  • Speedway High Lift Spring Kit, 1.253 Inch O.D.
    Speedway High Lift Spring Kit, 1.253 Inch O.D.
    x
                

    S/B Chevy high lift spring kit for solid lifter cams. Kit includes 16 springs (single w/ damper) and 16 steel retainers for use with 7° locks.

    • 1.253" diameter
    • .600" max lift
    • 116 lbs. at 1.80" assembled height
    • 341 lbs. open
    • Solid at 1.16"
  • 1932-1953 Flathead Ford Single Valve Spring Retainers
    1932-1953 Flathead Ford Single Valve Spring Retainers
    x
                

    Things have changed considerably since the first Ford Flathead V8s were built more than 75 years ago, and Speedway Motors has the valve train parts you need to keep these vintage engines running on modern unleaded fuel.

    Single spring retainers for use with single-style valve springs. Fits 1932-1953 Ford and Mercury Flathead V8s.

    Flathead Valve Assembly (Link)

  • COMP Cams 26120-16 Beehive 1.445 Inch Valve Spring, Set of 16
    COMP Cams 26120-16 Beehive 1.445 Inch Valve Spring, Set of 16
    x
                Please view the product's page for more information
            
  • Flathead Ford No-Lead Hardened Valve Seat, Exhaust
    Flathead Ford No-Lead Hardened Valve Seat, Exhaust
    x
                

    The flathead Ford V8 was designed to run on fuel with high levels of lead, but even with leaded fuel, the stock valves will eventually hammer the seats out, which will close up the valve lash and leave your valves hanging open...that is if you don't seize a valve to the guides first!

    Remember what year your engine was built and how fatigued the valve train components are. Henry may have built them right with the technology he had available then, but this is now and we have the modern components you need.

    These 0.060 oversize valve seats are made of a specially hardened material to combat the effect of unleaded fuel and higher performance. Machine work is required for installation. Intake has a 30° seat and exhaust has a 45° seat.

    Flathead Valve Assembly (Link)

  • Small Block Chevy Steel Guide Plates, 5/16 Pushrods
    Small Block Chevy Steel Guide Plates, 5/16 Pushrods
    x
                Raised guiding area grips pushrods at highest point for stability and strength. Fits stock diameter 5/16" pushrods. Set of 8.
            
  • Flathead Ford Heat Treated Valve Guides
    Flathead Ford Heat Treated Valve Guides
    x
                

    The Flathead was designed to run on fuel with high levels of lead, but even with leaded fuel, the stock valves will eventually hammer the seats out, which will close up the valve lash and leave your valves hanging open...that is if you don't seize a valve to the guides first!

    Remember what year your engine was built and how fatigued the valve train components are. Henry may have built them right with the technology he had available then, but this is now and we have the modern components you need.

    These Flathead Ford valve guides are heat treated to be compatible with today's low-lead fuels. Fits 1932-53 engines. If using in a 1932-48 engine, you will have to use 1949-53 style retainers, keepers and valves.

    Flathead Valve Assembly (Link)

  • Heat Treated Valve Locks, 11/32 Inch, Set of 32
    Heat Treated Valve Locks, 11/32 Inch, Set of 32
    x
                

    These race locks are designed for stock or performance engines using 7 degree valve locks. They are manufactured from machined steel and offer excellent valve spring location, so it is not necessary to change to a 10 degree retainer. Whether you're rebuilding a stock engine or changing to valve springs that have more seat pressure, these valve locks will provide the reliability that you've been looking for.

    Heat Treated Valve Locks

    • High Quality & Heat Treated
    • High strength, premium, heavy duty
    • Machined from high quality steel
    • Valve stem diameter: 0.342 in.
    • 1-groove
    • 11/32", 7 Degree
    • Set of 32
  • Tru-Gear Small Block Chevy Noisy Gear Drive
    Tru-Gear Small Block Chevy Noisy Gear Drive
    x
                

    Replace your timing chain with a Speedway Tru-Gear gear drive. Unlike timing chains, a gear drive doesn't stretch, so your cam timing stays more accurate. We builds these drives with dual idler gears, making them more stable than single idler gear drives. A Tru Gear gear drive is as easy to install as a timing chain and will fit under your stock timing chain cover. Noisy gears give your engine a "supercharged" sound. 

    For use on Chevrolet Small Block engines 1957–1995 262-400 c.i. all without “FACTORY” hydraulic roller camshaft.

    453-3271N Instuctions (PDF)

  • Speedway Small Block Chevy Extra Strength Pushrods, 5/16 Inch
    Speedway Small Block Chevy Extra Strength Pushrods, 5/16 Inch
    x
                

    Made from C1010 material and heat treated. Has 25% more column strength than stock pushrods. Black finish, 5/16" diameter and .075" wall with drilled, welded balls. Can be used with guide plates. Use for spring pressures up to 400 lbs.

    Available in stock length (7.794"), .100" longer (7.894") and .150" longer (7.944"). Set of 16.

  • Flathead Ford V8 Stainless Steel Valves, Exhaust
    Flathead Ford V8 Stainless Steel Valves, Exhaust
    x
                

    These flathead Ford V8 stainless steel valves are made of hi-grade 4N stainless. Each valve is 0.060 oversize and has an optimized seat angle and boasts a full machine finish, all of which combine to improve airflow and increase horsepower. The intake has a 30° seat and the exhaust has a 45° seat.

    Fits 1932-1953 engines.

    Flathead Valve Assembly (Link)

  • Small Block Chevy Chrome Timing Tab, 7 Inch
    Small Block Chevy Chrome Timing Tab, 7 Inch
    x
                These timing tabs work with small block Chevy covers 910-17401 and 910-17403.
            
  • Small Block Chevy Steel Roller Tip Rocker Arms, 1.5:1
    Small Block Chevy Steel Roller Tip Rocker Arms, 1.5:1
    x
                Stock type long slot steel rockers with roller tip installed. Includes stock type balls and nuts. Fits S/B Chevy with 3/8" rocker arm studs. Set of 16.
            
  • 1932-53 Flathead Ford V8 Camshaft Bearings
    1932-53 Flathead Ford V8 Camshaft Bearings
    x
                Restore oil pressure and timing accuracy with a set of new cam bearings for your 1932-1953 Flathead Ford. 
            
  • Quick Change Cam Cover Kit, Plain
    Quick Change Cam Cover Kit, Plain
    x
                

    Quick change cam cover eliminates the need for dropping the oil pan when replacing timing chain or advancing camshaft. Fits small block Chevy with "long" style (1969-1986) water pump.

    Use of this cover with a "short" water pump typically causes clearance issues with the back of the pump. It can be used with a short pump, but the pump would need to be shimmed for clearance.

  • Cloyes Gear C3023X S/B Chevy Double Roller Timing Chain
    Cloyes Gear C3023X S/B Chevy Double Roller Timing Chain
    x
                

    These heavy duty double-roller timing chain sets for S/B Chevy V8s feature .200" diameter rollers, cast iron cam sprockets and high-quality, heat-treated steel crank sprockets with triple keyways.

  • Small Block Chevy Two-Piece Stud Girdle, 3/8 Inch Studs
    Small Block Chevy Two-Piece Stud Girdle, 3/8 Inch Studs
    x
                

    BluMax Stud Girdles are designed to eliminate rocker stud flexing and provide more accurate valve lift and timing. They are specially machined to accommodate vacuum pump and crank case evacuation components. These lightweight, spring-loaded, 6061 T-6 aluminum stud girdles include 3/8" polylocks.

    For S/B Chevy V8. 

    • Polylocks included
    • Anodized for a superior finish
    • More consistent high-RPM performance
    • Easy and quick removal and replacement
    • Made from the finest quality billet aluminum
    • Pre-machined to allow for vacuum pump airflow

     

  • Rocker Arm Stud Pinning Kit
    $9.99
    Product Rating: 4.00 Stars
    Rocker Arm Stud Pinning Kit
    x
                Prevents studs from loosening. For all engines using pressed-in rocker arm studs. Not for hollow studs. 16 roll pins, 1 special 5/32" drill.
            
  • 1949-1953 Flathead Ford Front Cam Gears
    1949-1953 Flathead Ford Front Cam Gears
    x
                

    Most flathead replacement camshafts don’t come with the distributor drive gear. Don’t forget to get one! Speedway recommends that you replace your front distributor gear and rear oil pump gear at the same time.

    • For use on 1949-1953 flathead Fords that retain the original front drive distributor
    • New Isky cams come with this gear
    • Can be used on 1948 and earlier engines that use a 1949 and newer cam, front cover and distributor
  • Flathead Ford V8 Heavy Duty Valve Keepers, 16 Pairs
    Flathead Ford V8 Heavy Duty Valve Keepers, 16 Pairs
    x
                

    Stock Flathead Fords have weak valve springs, which increases wear on retainers, valve stem grooves and keepers. Increased horsepower and hard driving often cause failure. Recommended as part of Speedway’s no-lead valve conversion for Flatheads.

    • Heavy-duty, case-hardened, stamped steel 7° keepers
    • Stronger than originals
    • Works with 1949-1953 valve stems and retainers
      16 Pairs

     

    Flathead Valve Assembly (Link)

  • ARP Fasteners 200-1401 Chevy Timing Cover Studs
    ARP Fasteners 200-1401 Chevy Timing Cover Studs
    x
                Includes all hardware. 170,000 PSI studs.  
    All Chevy V8, 1/4" stud kit.
  • Chevy Cam Degree Bushing Kit, Even Degrees
    Chevy Cam Degree Bushing Kit, Even Degrees
    x
                

    Used for degreeing in camshaft. Even #s are a set of five. Use a 13/32” drill bit to re-drill dowel hole in cam gear. Be sure to securely fasten cam gear when drilling to prevent elongating the hole.

    550-85 Instructions (PDF)

  • Small Block Chevy Aluminum Cam Button
    Small Block Chevy Aluminum Cam Button
    x
                Limits lateral movement of camshaft ("cam walk"). Solid aluminum construction. Fits Small Block Chevy 262-400 c.i. and 90° V6.
            
  • Moroso 62190 11 Inch Degree Wheel
    Moroso 62190 11 Inch Degree Wheel
    x
                

    11" diameter. Heavy gauge aluminum discs calibrated in 1° increments for determining precise valve, cam and ignition timing. 11" degree wheel works with crank socket.

    • These degree wheels are mandatory for professional engine builders
    • Accurately measures several timing functions of an engine: camshaft centerline, valve timing, TDC, BDC, etc.
    • Marked in easy-to-read one degree increments
    • Made from heavy gauge metal with a silk screen finish for long-lasting use
    • Adapter included to fit virtually any engine
    • For mounting either wheel, use Crankshaft Socket Nos. 61755 or No. 61756 for Small and Big Block Chevys, and No. 61757 for LS Series Engines with keyway

     

  • Flathead Ford V8 Stainless Steel Valves, Intake
    Flathead Ford V8 Stainless Steel Valves, Intake
    x
                

    These flathead Ford V8 stainless steel valves are made of hi-grade 4N stainless. Each valve is 0.060 oversize and has an optimized seat angle and boasts a full machine finish, all of which combine to improve airflow and increase horsepower. The intake has a 30° seat and the exhaust has a 45° seat.

    Fits 1932-1953 engines.

    Flathead Valve Assembly (Link)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 11