Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 6

Products

Brake Pedal

Shop Classic Brakes At Speedway Motors

Speedway Motors is the #1 authority on disc brakes conversion kits. With the most experience in the Classic Pickup Truck business, you can be assured that you are getting a quality, excellent fitting kit. Insist on a Speedway front disc brake conversion kit for your classic truck. Don't forget to check out our huge selection of brake rotors, high volume master cylinders, proportioning valves and blocks. Stock up on all the essential brake lines, brake calipers, brake pads and fittings, too!

Featured Products
  • Brake Pedal Pad, Round, Stainless Steel
    Brake Pedal Pad, Round, Stainless Steel
    (Part #7024852)
    x
                Stainless Steel Brake Pedal Cover with rubber insert. Universal. 1/2" fine thread for attaching stud on the back.
            
  • Wilwood Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    Wilwood Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    (Part #91029977)
    x
                

    Wilwood's racing brake/clutch pedal assemblies are the result of years of hands-on experience, input from racers and chassis builders, and design, material selection and manufacturing techniques that result in durable, lightweight components. They incorporate ergonomics without sacrificing performance, and practical requirements without adding weight.

    • Combines the brake & clutch pedals into one unit
    • Positions M/C inside the firewall away from engine heat
    • Aluminum frame & arm construction
    • Steel pivots & mounting studs
    • Anti-skid pedal pads
    • Clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias
    • Bias can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustment

    Tri reverse mount master cylinder pedal assembly has both clutch and brake pedals with balance bar for dual brake master cylinders.

    910-29977 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood 340-1290 Swing Mount Clutch/Brake Pedal, Single M/C, 7:1
    Wilwood 340-1290 Swing Mount Clutch/Brake Pedal, Single M/C, 7:1
    (Part #8353401290)
    x
                

    This pedal is often used as a clutch pedal with a single outlet master cylinder, or as a brake pedal in conjunction with dual outlet, tandem master cylinders on four wheel brake equipped vehicles. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad.

    Swing mount has a 7.00 to 1 pedal ratio.

    Pedal Dimensions (Link)

    Detailed Schematic of Pedal 

    835-3401290 Instructions (PDF) 

     

  • Pedal Mount Plate
    $14.99
    Product Rating: 5.00 Stars
    Pedal Mount Plate
    (Part #91641025)
    x
                

    A simple rigid steel mount for hanging your pedals. Fits all aluminum Wilwood, U.S. Brake, or Tilton brake/clutch pedals and master cylinders we sell.

  • Garage Sale - Lokar XBAG-6080 Midnight Series 55-57 Chevy XL Non-PWR Brake Pad w/Rub
    Garage Sale - Lokar XBAG-6080 Midnight Series 55-57 Chevy XL Non-PWR Brake Pad w/Rub
    (Part #UP48005)
    x
                

    This pedal pad is garage sale priced because we do not usually stock it.   

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

    Brake and Clutch Pads are designed to match the Throttle Pedal assemblies. With Lokar's exclusive mounting design, no drilling is needed to mount pads, which allows easy installation.
    XL Non-Power Brake Pads:

    • Outside measurement of 6 x 2 3/4 and fits 3 1/4 x 1 5/8 original steel brake pedal
  • Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    (Part #6176702)
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from steel and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Female weld bung fittings available in steel.  1/4 Inch NPT works well with rubber round pedal pad (part number 91031200) to mount pedal stud. 

    Threaded Steel Weld Bung Fitting

    • 1/4 Inch NPT

    Fitting Thread Application Chart (GIF)

     

  • Wilwood 340-1289 Floor Mount Clutch/Brake Pedal, Single M/C, 6:1
    Wilwood 340-1289 Floor Mount Clutch/Brake Pedal, Single M/C, 6:1
    (Part #8353401289)
    x
                This pedal can be used for either a hydraulic clutch release or brake master cylinder when used with Wilwood's tandem feed master cylinder and adapter kit. 
    • 6:1 pedal ratio
    • All aluminum frame and arm with steel pivots
    • Anti-skid pedal pad
    • Mounting flange is a vertical pattern on a 2-1/4" on center

    835-3401289 Dimensions (Link)

    Brake Pedal and Blanace Bar Instruction Guide (PDF) 

  • Lokar XBAG-6152 Midnight Series Lakester Steel Brake/Clutch Pedal Pad
    Lokar XBAG-6152 Midnight Series Lakester Steel Brake/Clutch Pedal Pad
    (Part #491XBAG6152)
    x
                

    Lakester hot rod pedal styling is a continuation of the many nostalgic products we offer at Lokar. The pedals have the same quality you have come to expect from its sister steel spoon throttle pedal and round brake/clutch pad. The removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.

    • Lakester pedals feature curved pads and arms.
    • This unique pedal design will give your favorite vehicle an all new look.
    • The throttle pedal is designed using Delrin bushings for smooth operation when throttling up or down during daily use.

Filter

"Classic Truck, Brake Pedal" Page 1 of 6

Page 1 of 6

  • Brake Pedal Pad, Round, Rubber
    Brake Pedal Pad, Round, Rubber
    (Part #91031200)
    x
                Rubber brake pedal cover has a concentric circular pattern like original equipment. 1/4" NPT stud (the shank is .650" in length). Molded hard-rubber construction and is 3-1/2" dia. 
            
  • Lokar BAG-6083 1976-03 Chevy Truck Billet Alum Automatic Brake Pad
    Lokar BAG-6083 1976-03 Chevy Truck Billet Alum Automatic Brake Pad
    (Part #491BAG6083)
    x
                
    • Made to cover the factory brake pad. Billet aluminum construction with hardware included. Made in the U.S.A. Lifetime warranty.
    • Made To Cover Factory Brake Pad
    • Quick And Easy Installation
    • No Drilling Required
    • No Alignment Problems
    • Hardware Incl.
    • Billet Aluminum
    • Made In The U.S.A.
    • Lifetime Warranty
  • Lokar BAG-6005 Billet Aluminum Brake Pad w/Rubber, Brushed
    Lokar BAG-6005 Billet Aluminum Brake Pad w/Rubber, Brushed
    (Part #491BAG6005)
    x
                
    • Made to cover the factory brake pad. Billet aluminum construction with hardware included. Made in the U.S.A. Lifetime warranty.
    • Designed w/1/2 X 20 Thread
    • Incl. 1/2 X 20 Stud In Kit
    • Can Be Mounted Centered Or Off Center
    • Rubber Insert Designed Pad
    • Made In The U.S.A.
    • Lifetime Warranty
  • Lokar XBAG-6176 Midnight Series 97-01 Jeep Auto Curved Brake Pad w/Rub
    Lokar XBAG-6176 Midnight Series 97-01 Jeep Auto Curved Brake Pad w/Rub
    (Part #491XBAG6176)
    x
                For a compact and clean look. Add style and function to your classic car. Designed with hidden screws. Curved to match and bolt directly to the factory pedal. Brushed billet aluminum with rubber inserts. Made in the U.S.A. Lifetime warranty.
            
  • US Brake Tri Reverse Mount Master Cylinder Pedal Assembly Kit, 6.2:1
    US Brake Tri Reverse Mount Master Cylinder Pedal Assembly Kit, 6.2:1
    (Part #91029984)
    x
                

    This Wilwood pedal/US Brake master cylinder assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • 6.2:1 pedal ratio 
    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction
    • Each master cylinder has a single 1/8" NPT outlet
    • Specify m/c bore sizes needed (3/4", 7/8", 1")

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Lokar BAG-6185 1966-77 Ford Bronco Billet Alum Man Brake/Clutch Pedals
    Lokar BAG-6185 1966-77 Ford Bronco Billet Alum Man Brake/Clutch Pedals
    (Part #491BAG6185)
    x
                For a compact and clean look. Add style and function to your classic car. Designed with hidden screws. Curved to match and bolt directly to the factory pedal. Brushed billet aluminum with rubber inserts. Made in the U.S.A. Lifetime warranty.
    • For A Compact And Clean Look
    • Add Style And Function To Your Classic Car
    • Designed With Hidden Screws
    • Curved To Match And Bolt Directly To Factory Pedal
    • Black Anodized Aluminum w/Rubber Inserts
    • Lifetime Warranty
  • Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    (Part #6176702)
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from steel and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Female weld bung fittings available in steel.  1/4 Inch NPT works well with rubber round pedal pad (part number 91031200) to mount pedal stud. 

    Threaded Steel Weld Bung Fitting

    • 1/4 Inch NPT

    Fitting Thread Application Chart (GIF)

     

  • Lokar BCA-9503 90 Billet Aluminum Direct Fit Brake & Clutch Pedal Arm
    Lokar BCA-9503 90 Billet Aluminum Direct Fit Brake & Clutch Pedal Arm
    (Part #491BCA9503)
    x
                
    • Billet Brake And Clutch Arm
  • Lokar SG-6008 Steel Brake Pad w/Rubber, Chromed
    Lokar SG-6008 Steel Brake Pad w/Rubber, Chromed
    (Part #491SG6008)
    x
                Lokar's Steel Throttle Pedals are the first spring-loaded steel pedal in the industry and designed after OEM pedals. Removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.
    • Lokar offers these steel assemblies in both our standard pad size and our larger, XL pad.
    • The XL pad is EXTRA  LARGE for those seeking more substance under foot.
    • Matching Steel Brake Pads mount with a 1/2 - 20 stud built into the back of the pad.
    • Matching Dimmer Switch Cover fits both Chevy and Ford.
    • Available in chromed finish
  • Lokar XBAG-6107 Midnight Series Standard Oval Billet Alum Brake Pad
    Lokar XBAG-6107 Midnight Series Standard Oval Billet Alum Brake Pad
    (Part #491XBAG6107)
    x
                
    • Brake pads are designed with a 1/2 - 20 thread.
    • Includes a 1/2 - 20 stud in the kit.
    • Can be mounted centered or off center.
  • Wilwood Reverse Swing Mount Dual Master Cylinder Pedal Assembly
    Wilwood Reverse Swing Mount Dual Master Cylinder Pedal Assembly
    (Part #91029972)
    x
                

    Dual reverse pedal mounts two brake master cylinders with a bias balance bar. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 6.25 to 1 pedal ratio. Master cylinders have single 1/8" NPT outlets.

    • Positions master cylinders inside the firewall away from engine heat
    • Aluminum frame and arm construction
    • Steel pivots and mounting studs
    • Anti-skid pedal pad

    910-29972 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Lokar BAG-6137 55-57 Chevy Curved Power Billet Alum Brake Pedal Pad
    Lokar BAG-6137 55-57 Chevy Curved Power Billet Alum Brake Pedal Pad
    (Part #4916137)
    x
                

    For a compact and clean look, Lokar has put a modern bend on classic brake pedal pads. These curved brake/clutch pedal covers add style and function to your classic car. Designed with hidden screws, these pads are curved and pocketed to match and bolt directly to the factory steel brake pedal. Each brake pedal cover has been fashioned after its corresponding factory rubber pad and is available in a brushed finish.

    • Billet aluminum
    • Machined to fit over the stock steel pads
    • Quick and easy installation
    • Rubber inserts
    • Brushed finish

    4916137 Installation Instructions (PDF)

  • Lokar XBAG-6186 Midnight Series 66-77 XL Billet Manual Brake Pedal Pad
    Lokar XBAG-6186 Midnight Series 66-77 XL Billet Manual Brake Pedal Pad
    (Part #491XBAG6186)
    x
                For a compact and clean look. Add style and function to your classic car. Designed with hidden screws. Curved to match and bolt directly to the factory pedal. Brushed billet aluminum with rubber inserts. Made in the U.S.A. Lifetime warranty.
    • For A Compact And Clean Look
    • Add Style And Function To Your Classic Car
    • Designed With Hidden Screws
    • Curved To Match And Bolt Directly To Factory Pedal
    • Black Anodized Aluminum w/Rubber Inserts
    • Lifetime Warranty
  • Lokar XBAG-6153 Midnight Series Lakester Steel Auto Brake Pedal Pad
    Lokar XBAG-6153 Midnight Series Lakester Steel Auto Brake Pedal Pad
    (Part #491XBAG6153)
    x
                

    Lakester hot rod pedal styling is a continuation of the many nostalgic products we offer at Lokar. The pedals have the same quality you have come to expect from its sister steel spoon throttle pedal and round brake/clutch pad. The removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.

    • Lakester pedals feature curved pads and arms.
    • This unique pedal design will give your favorite vehicle an all new look.
    • The throttle pedal is designed using Delrin bushings for smooth operation when throttling up or down during daily use.
  • Lokar BAG-6184 1976-77 Ford Bronco Billet Alum Auto Brake Pedal w/Pads
    Lokar BAG-6184 1976-77 Ford Bronco Billet Alum Auto Brake Pedal w/Pads
    (Part #491BAG6184)
    x
                For a compact and clean look. Add style and function to your classic car. Designed with hidden screws. Curved to match and bolt directly to the factory pedal. Brushed billet aluminum with rubber inserts. Made in the U.S.A. Lifetime warranty.
    • For A Compact And Clean Look
    • Add Style And Function To Your Classic Car
    • Designed With Hidden Screws
    • Curved To Match And Bolt Directly To Factory Pedal
    • Black Anodized Aluminum w/Rubber Inserts
    • Lifetime Warranty
  • Lokar XBAG-6152 Midnight Series Lakester Steel Brake/Clutch Pedal Pad
    Lokar XBAG-6152 Midnight Series Lakester Steel Brake/Clutch Pedal Pad
    (Part #491XBAG6152)
    x
                

    Lakester hot rod pedal styling is a continuation of the many nostalgic products we offer at Lokar. The pedals have the same quality you have come to expect from its sister steel spoon throttle pedal and round brake/clutch pad. The removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.

    • Lakester pedals feature curved pads and arms.
    • This unique pedal design will give your favorite vehicle an all new look.
    • The throttle pedal is designed using Delrin bushings for smooth operation when throttling up or down during daily use.
Goto Previous PagePrevious Page
1 2 3 4 5 6