Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors is the #1 authority on disc brakes conversion kits. With the most experience in the Classic Pickup Truck business, you can be assured that you are getting a quality, excellent fitting kit. Insist on a Speedway front disc brake conversion kit for your classic truck. Don't forget to check out our huge selection of brake rotors, high volume master cylinders, proportioning valves and blocks. Stock up on all the essential brake lines, brake calipers, brake pads and fittings, too!

"Classic Truck, Brake Pedal" Page 1 of 2

  • Pedal Mount Plate
    $14.99
    Product Rating: 5.00 Stars
    Pedal Mount Plate
    x
                

    A simple rigid steel mount for hanging your pedals. Fits all aluminum Wilwood, U.S. Brake, or Tilton brake/clutch pedals and master cylinders we sell.

  • Wilwood Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    Wilwood Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    x
                

    Wilwood's racing brake/clutch pedal assemblies are the result of years of hands-on experience, input from racers and chassis builders, and design, material selection and manufacturing techniques that result in durable, lightweight components. They incorporate ergonomics without sacrificing performance, and practical requirements without adding weight.

    • Combines the brake & clutch pedals into one unit
    • Positions M/C inside the firewall away from engine heat
    • Aluminum frame & arm construction
    • Steel pivots & mounting studs
    • Anti-skid pedal pads
    • Clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias
    • Bias can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustment

    Tri reverse mount master cylinder pedal assembly has both clutch and brake pedals with balance bar for dual brake master cylinders.

    910-29977 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Brake Pedal Pad, Round, Stainless Steel
    Brake Pedal Pad, Round, Stainless Steel
    x
                Stainless Steel Brake Pedal Cover with rubber insert. Universal. 1/2" fine thread for attaching stud on the back.
            
  • Wilwood 340-1290 Forward Swing Mount Single Master Cylinder Pedal
    Wilwood 340-1290 Forward Swing Mount Single Master Cylinder Pedal
    x
                

    This pedal is often used as a clutch pedal with a single outlet master cylinder, or as a brake pedal in conjunction with dual outlet, tandem master cylinders on four wheel brake equipped vehicles. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad.

    Swing mount has a 7.00 to 1 pedal ratio.

    Pedal Dimensions (Link)

    Detailed Schematic of Pedal 

  • Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from steel and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Female weld bung fittings available in steel.  1/4 Inch NPT works well with rubber round pedal pad (part number 91031200) to mount pedal stud. 

    Threaded Steel Weld Bung Fitting

    • 1/4 Inch NPT

    Fitting Thread Application Chart (GIF)

     

  • Universal Frame Rail Power Brake Pedal Mount
    Universal Frame Rail Power Brake Pedal Mount
    x
                
    • Mounting bracket sets off frame rail 2 inches for clearance 
    • Push rod center is 4 inches from frame rail mounting bracket
    • Uses standard GM booster with 4 bolt mounting holes, 3-3/8" centers
    • 10-1/2" tall brake pedal arm with clevis and push rod
    • Pedal arm has 1/2" hole for pedal pad.
    • Mounting hardware included
  • Under-Dash Brake Pedal Assembly, Dual Diaphragm
    Under-Dash Brake Pedal Assembly, Dual Diaphragm
    x
                

    This universal bolt-on swing pedal assembly provides a secure way to mount the brake power booster and master cylinder on the firewall when upgrading brakes on a wide range of cars and trucks. Pedal bracket can be trimmed to fit your application and has holes to place pedal pivot point at 7", 8.5", 10", 11.5", or 13" from the firewall.

    • Includes a dual feed 1" bore master cylinder
    • Dual front outlets 1/2"-20 IFF
    • Dual rear outlets 9/16"-18 IFF
    • Plugs are included for un-used ports
    • Dual diaphragm 7" diameter booster
    • Pedal Length:  13-1/8" from pivot point to pad hole
    • Mount Bracket:  14" long
    • Booster Bolt Pattern:  3-3/8" square

    Booster Tech Tip (GIF)

  • Brake Pedal Pad, Round, Rubber
    Brake Pedal Pad, Round, Rubber
    x
                Rubber brake pedal cover has a concentric circular pattern like original equipment. 1/4" NPT stud (the shank is .650" in length). Molded hard-rubber construction and is 3-1/2" dia. 
            
  • 1941-1954 1/2 Ton Chevy/GMC Pickup Power Brake Pedal Assembly
    1941-1954 1/2 Ton Chevy/GMC Pickup Power Brake Pedal Assembly
    x
                

    These brake pedal assemblies allow you to easily install power brakes on your 1941-1954 half ton Chevy and GMC truck.

    Will NOT work in conjunction with the factory clutch pedal. Intended for use with an auto transmission. 

  • Under-Dash Brake Pedal Assembly, Single Diaphragm
    Under-Dash Brake Pedal Assembly, Single Diaphragm
    x
                

    This universal bolt-on swing pedal assembly provides a secure way to mount the brake power booster and master cylinder on the firewall when upgrading brakes on a wide range of cars and trucks. Pedal bracket can be trimmed to fit your application and has holes to place pedal pivot point at 7", 8.5", 10", 11.5", or 13" from the firewall.

    • Includes a dual feed 1" bore master cylinder
    • Dual front outlets 1/2"-20 IFF
    • Dual rear outlets 9/16"-18 IFF
    • Plugs are included for un-used ports
    • Single diaphragm 7" booster

    Booster Tech Tip (GIF)

  • Wilwood Forward Swing Dual Master Cylinder Brake Pedal
    Wilwood Forward Swing Dual Master Cylinder Brake Pedal
    x
                

    This popular pedal mounts two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • The swing type pedal has a ratio of 7:1
    • Includes balance bar
    • This popular pedal mounts two brake master cylinders with a bias balance bar

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Brake Pedal Pad, Polished Aluminum, Round Rubber
    Brake Pedal Pad, Polished Aluminum, Round Rubber
    x
                
    • Polished aluminum
    • Rubber brake pedal cover
    • 3" diameter
    • M12-1.75 stud
  • Wilwood 340-1289 Floor Mount Clutch Pedal
    Wilwood 340-1289 Floor Mount Clutch Pedal
    x
                This pedal can be used for either a hydraulic clutch release or brake master cylinder when used with Wilwood's tandem feed master cylinder and adapter kit. 
    • 6:1 pedal ratio
    • All aluminum frame and arm with steel pivots
    • Anti-skid pedal pad
    • Mounting flange is a vertical pattern on a 2-1/4" on center

    835-3401289 Dimensions (Link)

  • Lokar SG-6017 X-Large Steel Brake Pedal Pad w/Rubber Inserts, Chromed
    Lokar SG-6017 X-Large Steel Brake Pedal Pad w/Rubber Inserts, Chromed
    x
                

    Lokar's chrome steel brake pedal cover is EXTRA LARGE for those seeking more substance under foot.  The brake pedal pads mount with a 1/2 - 20 stud built into the back of the pad.

    • Chrome finish
    • Designed after OEM pedals
    • EXTRA LARGE for those seeking more substance under foot
    • Mount with a 1/2 - 20 stud built into the back of the pad
    • 3-3/4" x 2-3/4"

    Brake and Clutch Pedal Pad Installation Instructions (PDF)

  • Universal Under Dash Brake Pedal Mount
    Universal Under Dash Brake Pedal Mount
    x
                
    • Mounts below dash
    • Sandwiches firewall between bracket and booster/master
    • Includes adjustable pushrod
  • Lokar BFG-6013 Billet Aluminum XL Series Brake Pedal Pad w/Rubber
    New
    Lokar BFG-6013 Billet Aluminum XL Series Brake Pedal Pad w/Rubber
    x
                Lokar's billet aluminum brake pedal cover is EXTRA LARGE for those  seeking  more substance under foot.  These brake pedal pads mount with  a 1/2 - 20  stud built into the back of the pad. 
    • XL Series Pad Size, measures 3-3/4" wide x 2-3/4" tall
    • Rubber Insert Design Pad
    • Brushed Aluminum Finish

    Brake and Clutch Pedal Pad Installation Instructions (PDF)

  • Wilwood Reverse Swing Mount Dual Master Cylinder Pedal Assembly
    Wilwood Reverse Swing Mount Dual Master Cylinder Pedal Assembly
    x
                

    Dual reverse pedal mounts two brake master cylinders with a bias balance bar. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 6.25 to 1 pedal ratio. Master cylinders have single 1/8" NPT outlets.

    • Positions master cylinders inside the firewall away from engine heat
    • Aluminum frame and arm construction
    • Steel pivots and mounting studs
    • Anti-skid pedal pad

    910-29972 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Lokar BAG-6137 55-57 Chevy Curved Power Billet Alum Brake Pedal Pad
    Lokar BAG-6137 55-57 Chevy Curved Power Billet Alum Brake Pedal Pad
    x
                

    For a compact and clean look, Lokar has put a modern bend on classic brake pedal pads. These curved brake/clutch pedal covers add style and function to your classic car. Designed with hidden screws, these pads are curved and pocketed to match and bolt directly to the factory steel brake pedal. Each brake pedal cover has been fashioned after its corresponding factory rubber pad and is available in a brushed finish.

    • Billet aluminum
    • Machined to fit over the stock steel pads
    • Quick and easy installation
    • Rubber inserts
    • Brushed finish

    4916137 Installation Instructions (PDF)

  • Lokar BAG-6152 Lakester Steel Brake/Clutch Pedal Pad, Chromed
    Lokar BAG-6152 Lakester Steel Brake/Clutch Pedal Pad, Chromed
    x
                

    Lakester hot rod pedal styling is a continuation of the many nostalgic products offered at Lokar. The brake pedal covers have the same quality you have come to expect from its sister steel spoon throttle pedal and round brake/clutch pedal pad. Lakester pedals feature curved pads and arms.

    These new nostalgic style pedals are available in a chromed finish. This unique pedal design will give your favorite vehicle an all new look.

    • Hot rod styling
    • Chrome finish
    • Quality steel construction
    • Quick and easy installation
    • 2" x 3-1/2"

    4916152 Installation Instructions (PDF)

     

  • Wilwood 340-5181 Reverse Swing Mount Brake Pedal
    Wilwood 340-5181 Reverse Swing Mount Brake Pedal
    x
                

    Dual reverse pedal mounts two brake master cylinders with a bias balance bar. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 6.25 to 1 pedal ratio.

    • Positions master cylinders inside the firewall away from engine heat
    • Aluminum frame and arm construction
    • Steel pivots and mounting studs
    • Anti-skid pedal pad

    835-3405181 Instructions (PDF)

  • Lokar SPO-6071 Chrome Round Steel Brake/Clutch Pedal Pad with Rubber
    Lokar SPO-6071 Chrome Round Steel Brake/Clutch Pedal Pad with Rubber
    x
                

    Lokar's steel round 3" brake/clutch pedal pad is equipped with rubber inserts to complete the ensemble. The brake/clutch pedal cover is available in a chromed finish.

    • Nostalgic hot rod style
    • Equipped with rubber inserts 
    • Chrome finish
    • 3" Round

    Steel Brake/Clutch Pedal Pad Installation Instructions (PDF)

  • Universal Under Dash 90 Degree Pedal Assembly
    Universal Under Dash 90 Degree Pedal Assembly
    x
                
    • Universal right angle bracket
    • Converts front to back pedal motion into left to right
    • Accepts our 7" boosters
  • Lokar BAG-6166 67-72 Chevy/GMC Curved Billet Alum Auto Brake Pedal Pad
    Lokar BAG-6166 67-72 Chevy/GMC Curved Billet Alum Auto Brake Pedal Pad
    x
                For a compact and clean look, Lokar has put a modern bend  on classic  brake/clutch pedal pads. These curved brake/clutch pedal covers add style  and function to your classic truck.  Designed with hidden  screws, these  pads are curved to match and bolt directly to the factory  steel  brake/clutch pedal.  Each brake/clutch pedal cover has been  fashioned  after its corresponding factory rubber pad and is available in a brushed  finish.
    • Direct replacement
    • Curved to match and bolt directly onto factory steel brake/clutch pedal arms
    • Billet aluminum construction
    • Hidden screws
    • Rubber inserts for added traction
    • Brushed finish

    4916166 Installation Instructions (PDF)

  • Round Brake Pedal Pad - Black Chrome
    Round Brake Pedal Pad - Black Chrome
    x
                
    • Chrome Brake Pedal Cover
    • Universal fit, 3-1/8" O.D.
    • Non-slip rubber insert
    • 1/2" fine mounting stud on back
  • Lokar BAG-6169 67-72 Chevy/GMC Curved Billet Alum E-Brake Pedal Pad
    Lokar BAG-6169 67-72 Chevy/GMC Curved Billet Alum E-Brake Pedal Pad
    x
                For a compact and clean look, Lokar has put a modern bend  on classic   brake/clutch pedal pads. These curved e-brake pedal covers add style   and function to your classic truck.  Designed with hidden  screws,  these  pads are curved to match and bolt directly to the factory  steel   brake/clutch pedal.  Each brake/clutch pedal cover has been  fashioned   after its corresponding factory rubber pad and is available in a brushed   finish.
    • Direct replacement
    • Curved to match and bolt directly onto factory steel brake/clutch pedal arms
    • Billet aluminum construction
    • Hidden screws
    • Rubber inserts for added traction
    • Brushed finish

    4916169 Installation Instructions (PDF)

  • Lokar XBFG-6013 XL Series Billet Aluminum Brake Pedal Pad w/Rubber
    Lokar XBFG-6013 XL Series Billet Aluminum Brake Pedal Pad w/Rubber
    x
                

    Billet aluminum brake pedal covers are designed to match the throttle pedal assemblies and are machined to fit over the stock steel pads with Lokar's exclusive mounting design, no drilling is needed and installation is simple. Traditional brake pedal pads are available with rubber inserts and a brushed finish. Lokar's billet aluminum brake pedal cover is designed with a 1/2 - 20 thread and includes a 1/2 - 20 stud in kit. These pedals can be mounted centered or off center.

    • Billet aluminum 
    • Machined to fit over the stock steel brake pedal pads
    • No drilling is needed
    • Quick and easy installation
    • Rubber inserts
    • 3-3/4" wide x 2-3/4" tall

    XL and Standard Pedal Comparison Chart (Link) 

    49106013 Installation Instructions (PDF)

     

  • Wilwood Dual Master Cylinder Floor Mount Pedal Assembly
    Wilwood Dual Master Cylinder Floor Mount Pedal Assembly
    x
                

    This is one of racing's most popular pedals for mounting two brake master cylinders with a bias balance bar. The floor mount pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 

    • Floor mount assembly
    • Has a 6:1 pedal ratio
    • Includes brake balance bar

    910-29976 Instructions (PDF)

    910-29976 Specs Sheet

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • US Brake Swing Mount Dual Master Cylinder Pedal
    US Brake Swing Mount Dual Master Cylinder Pedal
    x
                

    This combo pairs a Wilwood pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 7:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", or 1".

    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Lokar BAG-6138 55-57 Chevy Curved XL Non-Power Alum Brake Pedal Pad
    Lokar BAG-6138 55-57 Chevy Curved XL Non-Power Alum Brake Pedal Pad
    x
                

    For a compact and clean look, Lokar has put a modern bend on classic brake pedal pads. These curved brake/clutch pedal covers add style and function to your classic car. Designed with hidden screws, these pads are curved and pocketed to match and bolt directly to the factory steel brake pedal. Each brake pedal cover has been fashioned after its corresponding factory rubber pad and is available in a brushed finish.

    • Extra Large Non-Power Brake Pedal Pad
    • Billet aluminum
    • Machined to fit over the stock steel pads
    • Quick and easy installation
    • Rubber inserts
    • Brushed finish

    4916138 Installation Instructions (PDF)

  • Dual Reverse-Mount Master Cylinder Pedal Kit
    Dual Reverse-Mount Master Cylinder Pedal Kit
    x
                

    This Wilwood pedal mounts two US Brake master cylinders with a bias balance bar and positions the master cylinders inside the firewall and away from engine heat. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable (at right) for quick on-track adjustments.

    • US Brake Master Cylinders
      • External return spring maintains positive pedal feel, prolongs pad life
      • Polished smooth bores
      • One-piece alumiunum construction

    6.25:1 pedal ratio. Each master cylinder has a single 1/8" NPT outlet. Specify m/c bore sizes.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Lokar XBAG-6005 Standard Black Billet Alum Brake Pedal Pad w/Rubber
    Lokar XBAG-6005 Standard Black Billet Alum Brake Pedal Pad w/Rubber
    x
                

    Billet aluminum brake pedal covers are designed to match the throttle pedal assemblies and are machined to fit over the stock steel pads with Lokar's exclusive mounting design, no drilling is needed and installation is simple. Traditional brake pedal pads are available with rubber inserts and a brushed finish. Lokar's billet aluminum brake pedal cover is designed with a 1/2 - 20 thread and includes a 1/2 - 20 stud in kit. These pedals can be mounted centered or off center.

    • Billet aluminum 
    • Machined to fit over the stock steel pads
    • No drilling is needed
    • Quick and easy installation
    • Rubber inserts
    • 3" x 2"

    XL and Standard Pedal Comparison Chart (Link) 

    49106005 Installation Instructions (PDF)

  • TCI 600-6570-56 Under-Floor Power Brake / Hydraulic Clutch Assembly
    TCI 600-6570-56 Under-Floor Power Brake / Hydraulic Clutch Assembly
    x
                

    Want to put a manual transmission in your street rod?  These universal pedal assemblies offer a clean, simple way to mount your brake master cylinder and hydraulic clutch master cylinder to the frame, under the floor.  Kits include a bracket and pedals, plus new brake and clutch master cylinders.  Power brake kit has a 7” brake booster and matching master cylinder.

    • Overall length from front of pedal arm to back of master cylinder is 25-1/2"
    • Overall width from frame rail to right side of booster is 11-1/8"
    • Height from top of pedal assembly to bottom of booster is 6-3/4"
    • Top of pedal assembly to center of pedal pad mounting hole is 8-1/2"

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

     

  • TCI 600-6571-56 Under-Floor Manual Brake / Hydraulic Clutch Assembly
    TCI 600-6571-56 Under-Floor Manual Brake / Hydraulic Clutch Assembly
    x
                

    Want to put a manual transmission in your street rod?  These universal pedal assemblies offer a clean, simple way to mount your brake master cylinder and hydraulic clutch master cylinder to the frame, under the floor.  Kits include a bracket and pedals, plus new brake and clutch master cylinders.  Maximum brake pedal throw is 6", clutch pedal is 5.6".

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1953-56 Ford Pickup Frame Mount Power Brake Pedal
    1953-56 Ford Pickup Frame Mount Power Brake Pedal
    x
                

    These brake pedal assemblies allow you to easily install power brakes on your 1953-1956 Ford truck. 

    Note: Pedal assembly is only applicable to a chassis using an automatic transmission.  It does not function with the factory clutch pedal arrangement.

  • Lokar BAG-6107 Standard Oval Billet Aluminum Brake Pedal Pad, Brushed
    Lokar BAG-6107 Standard Oval Billet Aluminum Brake Pedal Pad, Brushed
    x
                

    These oval billet aluminum brake pads come in a standard size. The brake pedal covers are designed with a 1/2 - 20 thread and includes a 1/2 - 20 stud in the kit. Can be mounted centered or off center.

    • 1/2 - 20 thread with stud included
    • Mounted either centered or off center
    • 3-3/4" x 1-3/4"

    4916107 Installation Instructions (PDF)

  • Lokar BAG-6153 Lakester Steel Automatic Brake Pedal Pad, Chromed
    Lokar BAG-6153 Lakester Steel Automatic Brake Pedal Pad, Chromed
    x
                

    Lakester hot rod pedal styling is a continuation of the many nostalgic products we offer at Lokar. The brake pedal covers have the same quality you have come to expect from its sister steel spoon throttle pedal and round brake/clutch pad. Lakester pedals feature curved pads and arms.

    These new nostalgic style pedal covers are available in a chromed finish. This unique pedal design will give your favorite vehicle an all new look.

    • Hot rod styling
    • Quality steel construction
    • No drilling is needed
    • Quick and easy installation
    • Chromed finish
    • 5" x 2-3/4"

    4916153 Installation Instructions (PDF)

  • Lokar EFB-9001 Brushed Billet Aluminum Under Dash E-Brake Assembly
    Lokar EFB-9001 Brushed Billet Aluminum Under Dash E-Brake Assembly
    x
                

    NSRA Best New Product Lokar Under-the-Dash Foot Operated Emergency Brake features the same superior craftsmanship you have come to expect of all our products. This foot brake gives you ease of operation along with a clean, out of the way emergency brake.

    • Adjustable 9" to 13" firewall to dash
    • Length of the arm measures 10" from the pivot point to the bottom of the foot pad.
    • Dash to firewall adjustable bracketry
    • Various location mounting capability
    • Heat treated gears
    • Hidden gears and mechanisms for clean finish
    • Rubber stop for quiet pedal return
    • Application for finished and unfinished cars
    • Complete with instructions and all hardware
    • Connector cables sold separately
    • Available in brushed finish

    4919001 Installation Instructions (PDF)

  • US Brake Dual Master Cylinder Floor Mount Pedal
    US Brake Dual Master Cylinder Floor Mount Pedal
    x
                

    This combo pairs a Wilwood floor mount pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    US Brake Master Cylinders

    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction

    Has a 6:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", 1".

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1955-1959 Chevy Pickup Frame Mount Power Brake Pedal
    1955-1959 Chevy Pickup Frame Mount Power Brake Pedal
    x
                

    These brake pedal assemblies allow you to easily install power brakes on your 1955-1959 Chevy truck.

    Will NOT work in conjunction with the factory clutch pedal. Intended for use with an auto transmission.  


     

  • Garage Sale - 1947-54 Chevy Pickup Frame Pedal Mount Bracket
    Garage Sale
    Garage Sale - 1947-54 Chevy Pickup Frame Pedal Mount Bracket
    x
                

    This is the same bracket that comes with our 1947-54 brake pedal assembly.

     

    These brackets are garage sale priced because we do not usually sell them separately.  What you see is what you get. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     

Goto Previous PagePrevious Page
1 2