Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 2

Products

Brake Hydraulic Lines

Brake Hydraulic Lines

Get the stopping power you need with performance brake lines from Speedway Motors!  With line availabe in Stainless Steel, Teflon, Nylon and Steel and in practically any length you need, there's no reason to look anywhere else!  When you're ready to upgrade your brake lines, trust the pros at Speedway Motors to get you the ultimate in braking performance.


Featured Products
  • 3/16 Inch Steel Brake Line
    From: $1.99
    Product Rating: 4.73 Stars
    3/16 Inch Steel Brake Line
    (Part #91031800)
    x
                If you choose to use inverted flare hardware on your car, Speedway can save you time, effort, and money. 

    These 3/16" mild steel "hard" lines bend easily and smoothly with hand tools, already have a double flare on each end, have male fittings threaded 3/8"-24 installed and have a 45° inverted flare.

    Double wall, copper plated steel brake line. High burst strength. Resistant to vibration and fatigue. 3/16" O.D. tubing. Each end flared with 3/8"-24 fitting. Seven different precut lengths available.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Stainless 19 Inch Brake Line with 90 Degree End
    Stainless 19 Inch Brake Line with 90 Degree End
    (Part #91031892)
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Braided Stainless AN 12 Inch Brake Line
    Braided Stainless AN 12 Inch Brake Line
    (Part #91031842)
    x
                

    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

    AN 3 O.D. is .265 and AN 4 O.D. is .305

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Stainless 26 Inch Brake Line with 90 Degree End
    Stainless 26 Inch Brake Line with 90 Degree End
    (Part #91031893)
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Braided Steel AN 25 Inch Brake Line
    Braided Steel AN 25 Inch Brake Line
    (Part #91031845)
    x
                
    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

    AN 3 O.D. is .265 and AN 4 O.D. is .305

    Select applicable length. AN size is the "-#" at the end of each part number.


  • Stainless 12 Inch Brake Line with 90 Degree End
    Stainless 12 Inch Brake Line with 90 Degree End
    (Part #91031897)
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • 3/16 Inch Steel Brake Line, 25 Ft. Roll
    $14.99
    $15.99
    Product Rating: 4.75 Stars
    3/16 Inch Steel Brake Line, 25 Ft. Roll
    (Part #91031810)
    x
                

    Here's the item for added strength and durability; zinc coated steel brake line. Available in a 25' roll of 3/16" line, no nuts included.

    This line bends easily and smoothly with hand tools and can be flared with a 45° double flaring tool. Use in conjunction with our 3/8"-24 inverted flare male brake line nuts.

    Brake System Builder Tip (GIF)

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • SSBC Stainless Steel 3/16 Inch Brake Lines
    SSBC Stainless Steel 3/16 Inch Brake Lines
    (Part #91041800)
    x
                

    This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 45° double flare with a 3/8"-24 male fitting. Seven different lengths available.

    NOTE: This tubing is flared from the factory with a double flare machine, therefore it is not recommended that these lines be cut and flared to length.

Filter

"Classic Truck, Brake Hydraulic Lines" Page 1 of 2

Page 1 of 2

  • Stainless Steel Brake Line, 3/16 Inch
    Stainless Steel Brake Line, 3/16 Inch
    (Part #6178510)
    x
                

    Our 3/16" stainless steel tubing is made from 304 grade (rated at 6000 psi) which is double annealed to allow easy flaring.

    NOTE: This line is intended to be used in conjunction with 37 degree AN # 3 style fittings which make use of a single flare. Stainless steel line will not work with 45 degree double flare 3/8"-24 flare nuts. We strongly suggest that the 37 degree single flare (flaring tool # 910-89524) be used when flaring this line for the AN # 3 tube nuts and sleeves.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

    Brake System Builder Tip (GIF)

  • Stainless 26 Inch Brake Line with 90 Degree End
    Stainless 26 Inch Brake Line with 90 Degree End
    (Part #91031893)
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • SSBC Stainless Steel 3/16 Inch Brake Lines
    SSBC Stainless Steel 3/16 Inch Brake Lines
    (Part #91041800)
    x
                

    This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 45° double flare with a 3/8"-24 male fitting. Seven different lengths available.

    NOTE: This tubing is flared from the factory with a double flare machine, therefore it is not recommended that these lines be cut and flared to length.

  • Braided Stainless AN 60 Inch Brake Line
    Braided Stainless AN 60 Inch Brake Line
    (Part #91031851)
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Braided Steel AN 25 Inch Brake Line
    Braided Steel AN 25 Inch Brake Line
    (Part #91031845)
    x
                
    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

    AN 3 O.D. is .265 and AN 4 O.D. is .305

    Select applicable length. AN size is the "-#" at the end of each part number.


  • GARAGE SALE - S.S. BRAKE LINE KIT - 23 T
    $89.99
    $119.99
    Garage Sale
    GARAGE SALE - S.S. BRAKE LINE KIT - 23 T
    (Part #UP25669)
    x
                
    Complete your '23 T-Bucket chassis with this pre-bent Stainless Steel brake line kit.  
     
    This is Garage Sale priced because it is missing one of the brake lines typically included with this kit.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - SSBC Stainless Steel 3/16 Inch Brake Lines, 60 Inch Length
    Garage Sale
    Garage Sale - SSBC Stainless Steel 3/16 Inch Brake Lines, 60 Inch Length
    (Part #UP50727)
    x
                

    This brake line is garage sale priced because one end was bent in shipping. 

     No Warranty, No Returns On Garage Sale Items

    This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 45° double flare with a 3/8"-24 male fitting. Seven different lengths available.

    NOTE: This tubing is flared from the factory with a double flare machine, therefore it is not recommended that these lines be cut and flared to length.

  • Braided Stainless AN 12 Inch Brake Line
    Braided Stainless AN 12 Inch Brake Line
    (Part #91031842)
    x
                

    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

    AN 3 O.D. is .265 and AN 4 O.D. is .305

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Stainless 48 Inch Brake Line with 90 Degree End
    Stainless 48 Inch Brake Line with 90 Degree End
    (Part #91031895)
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Stainless 12 Inch Brake Line with 90 Degree End
    Stainless 12 Inch Brake Line with 90 Degree End
    (Part #91031897)
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Stainless 24 Inch Brake Line with 90 Degree End
    Stainless 24 Inch Brake Line with 90 Degree End
    (Part #91031891)
    x
                
    These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.
     
    AN size is the "-#" at the end of the part number.
    • Anodized Steel Ends
    • -3 AN or -4 AN Fitting
    • 24" Brake Line
    • Straight and 90 Degree End
  • Braided Stainless AN 8 Inch Brake Line
    Braided Stainless AN 8 Inch Brake Line
    (Part #91031843)
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    (Part #6178530)
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for conventional live axle rear suspensions. Includes a 20 foot coil of 3/16" stainless steel line, nineteen -3 AN tube nuts, nineteen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, three -3 AN 18" braided stainless lines, and three 3/8" bulkhead nuts.

    617-8530 Instructions 

  • 3/16 Inch Steel Brake Line, 25 Ft. Roll
    $14.99
    $15.99
    Product Rating: 4.75 Stars
    3/16 Inch Steel Brake Line, 25 Ft. Roll
    (Part #91031810)
    x
                

    Here's the item for added strength and durability; zinc coated steel brake line. Available in a 25' roll of 3/16" line, no nuts included.

    This line bends easily and smoothly with hand tools and can be flared with a 45° double flaring tool. Use in conjunction with our 3/8"-24 inverted flare male brake line nuts.

    Brake System Builder Tip (GIF)

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Garage Sale - Total Performance Stainless Steel Brake Line
    Garage Sale
    Garage Sale - Total Performance Stainless Steel Brake Line
    (Part #715F10454SS)
    x
                

    Total Performance stainless steel brake line kit. Includes 3/16 hardlines that are already flaired for NPT and AN fittings, stainless steel flex lines to fit the AN4 fittings already attached, brass T fittings, and a Wilwood proportioning valve. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Braided Stainless AN 48 Inch Brake Line
    Braided Stainless AN 48 Inch Brake Line
    (Part #91031847)
    x
                
    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

    AN 3 O.D. is .265 and AN 4 O.D. is .305

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Stainless 19 Inch Brake Line with 90 Degree End
    Stainless 19 Inch Brake Line with 90 Degree End
    (Part #91031892)
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Braided Stainless AN 6 Inch Brake Line
    Braided Stainless AN 6 Inch Brake Line
    (Part #91031841)
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Braided Stainless AN 36 Inch Brake Line
    Braided Stainless AN 36 Inch Brake Line
    (Part #91031846)
    x
                
    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

    AN 3 O.D. is .265 and AN 4 O.D. is .305

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Garage Sale - Stainless Steel Brake Line and Fitting Kit
    Garage Sale
    Garage Sale - Stainless Steel Brake Line and Fitting Kit
    (Part #715BP173)
    x
                

    Stainless steel braided brake lines are perfect for almost any application. These include:

     

    • (2) Stainless Braided Lines 20"
    • (2) 90 Degree AN4 Fittings
    • (2) T Style AN4 Fittings with Farrels 

     

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

Goto Previous PagePrevious Page
1 2