Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Brakes At Speedway Motors

Speedway Motors is the #1 authority on disc brakes conversion kits. With the most experience in the Classic Pickup Truck business, you can be assured that you are getting a quality, excellent fitting kit. Insist on a Speedway front disc brake conversion kit for your classic truck. Don't forget to check out our huge selection of brake rotors, high volume master cylinders, proportioning valves and blocks. Stock up on all the essential brake lines, brake calipers, brake pads and fittings, too!

"Classic Truck, Brake Hydraulic Lines" Page 1 of 1

  • Garage Sale - Total Performance Stainless Steel AN3 Brake Line, 14 Inch
    Garage Sale
    Garage Sale - Total Performance Stainless Steel AN3 Brake Line, 14 Inch
    SKU-715BP18114
    x
                

    This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 37° double flare with a AN3 male fitting

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Stainless Steel Brake Line, 3/16 Inch
    Stainless Steel Brake Line, 3/16 Inch
    SKU-6178510
    x
                

    Our 3/16" stainless steel tubing is made from 304 grade (rated at 6000 psi) which is double annealed to allow easy flaring.

    NOTE: This line is intended to be used in conjunction with 37 degree AN # 3 style fittings which make use of a single flare. Stainless steel line will not work with 45 degree double flare 3/8"-24 flare nuts. We strongly suggest that the 37 degree single flare (flaring tool # 910-89524) be used when flaring this line for the AN # 3 tube nuts and sleeves.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

    Brake System Builder Tip (GIF)

  • Stainless 26 Inch Brake Line with 90 Degree End
    Stainless 26 Inch Brake Line with 90 Degree End
    SKU-91031893
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • SSBC Stainless Steel 3/16 Inch Brake Lines
    SSBC Stainless Steel 3/16 Inch Brake Lines
    SKU-91041800
    x
                

    This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 45° double flare with a 3/8"-24 male fitting. Seven different lengths available.

    NOTE: This tubing is flared from the factory with a double flare machine, therefore it is not recommended that these lines be cut and flared to length.

  • Braided Stainless AN 60 Inch Brake Line
    Braided Stainless AN 60 Inch Brake Line
    SKU-91031851
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Braided Steel AN 25 Inch Brake Line
    Braided Steel AN 25 Inch Brake Line
    SKU-91031845
    x
                
    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

    AN 3 O.D. is .265 and AN 4 O.D. is .305

    Select applicable length. AN size is the "-#" at the end of each part number.


  • GARAGE SALE - S.S. BRAKE LINE KIT - 23 T
    $89.99
    $119.99
    Garage Sale
    GARAGE SALE - S.S. BRAKE LINE KIT - 23 T
    SKU-UP25669
    x
                
    Complete your '23 T-Bucket chassis with this pre-bent Stainless Steel brake line kit.  
     
    This is Garage Sale priced because it is missing one of the brake lines typically included with this kit.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Braided Stainless AN 12 Inch Brake Line
    Braided Stainless AN 12 Inch Brake Line
    SKU-91031842
    x
                

    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

    AN 3 O.D. is .265 and AN 4 O.D. is .305

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Stainless 48 Inch Brake Line with 90 Degree End
    Stainless 48 Inch Brake Line with 90 Degree End
    SKU-91031895
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Stainless 12 Inch Brake Line with 90 Degree End
    Stainless 12 Inch Brake Line with 90 Degree End
    SKU-91031897
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Stainless 24 Inch Brake Line with 90 Degree End
    Stainless 24 Inch Brake Line with 90 Degree End
    SKU-91031891
    x
                
    These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.
     
    AN size is the "-#" at the end of the part number.
    • Anodized Steel Ends
    • -3 AN or -4 AN Fitting
    • 24" Brake Line
    • Straight and 90 Degree End
  • Braided Stainless AN 8 Inch Brake Line
    Braided Stainless AN 8 Inch Brake Line
    SKU-91031843
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    SKU-6178530
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for conventional live axle rear suspensions. Includes a 20 foot coil of 3/16" stainless steel line, nineteen -3 AN tube nuts, nineteen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, three -3 AN 18" braided stainless lines, and three 3/8" bulkhead nuts.

    617-8530 Instructions 

  • 3/16 Inch Steel Brake Line, 25 Ft. Roll
    $14.99
    $15.99
    Product Rating: 4.73 Stars
    3/16 Inch Steel Brake Line, 25 Ft. Roll
    SKU-91031810
    x
                

    Here's the item for added strength and durability; zinc coated steel brake line. Available in a 25' roll of 3/16" line, no nuts included.

    This line bends easily and smoothly with hand tools and can be flared with a 45° double flaring tool. Use in conjunction with our 3/8"-24 inverted flare male brake line nuts.

    Brake System Builder Tip (GIF)

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Garage Sale - Total Performance Stainless Steel Brake Line
    Garage Sale
    Garage Sale - Total Performance Stainless Steel Brake Line
    SKU-715F10454SS
    x
                

    Total Performance stainless steel brake line kit. Includes 3/16 hardlines that are already flaired for NPT and AN fittings, stainless steel flex lines to fit the AN4 fittings already attached, brass T fittings, and a Wilwood proportioning valve. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - Total Performance Cross Over Line, AN4
    Garage Sale
    Garage Sale - Total Performance Cross Over Line, AN4
    SKU-715TP23T100
    x
                

    Stainless steel braided brake line. Each line includes a brass T fitting with 1/8 NPT ends and aluminum AN fittings for hardlines on the other. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Braided Stainless AN 48 Inch Brake Line
    Braided Stainless AN 48 Inch Brake Line
    SKU-91031847
    x
                
    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

    AN 3 O.D. is .265 and AN 4 O.D. is .305

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Stainless 19 Inch Brake Line with 90 Degree End
    Stainless 19 Inch Brake Line with 90 Degree End
    SKU-91031892
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Braided Stainless AN 6 Inch Brake Line
    Braided Stainless AN 6 Inch Brake Line
    SKU-91031841
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Garage Sale - Total Performance Stainless Steel AN3 Brake Line, 6 Inch
    Garage Sale
    Garage Sale - Total Performance Stainless Steel AN3 Brake Line, 6 Inch
    SKU-715BP18106
    x
                

    This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 37° double flare with a AN3 male fitting

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Braided Stainless AN 36 Inch Brake Line
    Braided Stainless AN 36 Inch Brake Line
    SKU-91031846
    x
                
    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

    AN 3 O.D. is .265 and AN 4 O.D. is .305

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Garage Sale - Stainless Steel Brake Line and Fitting Kit
    Garage Sale
    Garage Sale - Stainless Steel Brake Line and Fitting Kit
    SKU-715BP173
    x
                

    Stainless steel braided brake lines are perfect for almost any application. These include:

     

    • (2) Stainless Braided Lines 20"
    • (2) 90 Degree AN4 Fittings
    • (2) T Style AN4 Fittings with Farrels 

     

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Stainless 36 Inch Brake Line with 90 Degree End
    Stainless 36 Inch Brake Line with 90 Degree End
    SKU-91031894
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • 3/16 Inch Steel Brake Line
    From: $1.99
    Product Rating: 4.67 Stars
    3/16 Inch Steel Brake Line
    SKU-91031800
    x
                If you choose to use inverted flare hardware on your car, Speedway can save you time, effort, and money. 

    These 3/16" mild steel "hard" lines bend easily and smoothly with hand tools, already have a double flare on each end, have male fittings threaded 3/8"-24 installed and have a 45° inverted flare.

    Double wall, copper plated steel brake line. High burst strength. Resistant to vibration and fatigue. 3/16" O.D. tubing. Each end flared with 3/8"-24 fitting. Seven different precut lengths available.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Garage Sale - T-Bucket Stainless Brake Lines
    Garage Sale
    Garage Sale - T-Bucket Stainless Brake Lines
    SKU-UP35185
    x
                

    Complete your '23 T-Bucket chassis with this pre-bent Stainless Steel brake lines. Includes hard lines to properly plumb the brakes on your T.

    Note: Does not work with '27 T chassis. 

    Learn more about the proper uses of residual and proportioning valves and by reading our tech article. Brake System Selection.  

     

    These lines are garage sale priced because one of them is pinched.  Hard lines only, what you see is what you get. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS