Speedway Motors is the classic pickup truck source for body parts, gauges, and interior accessories! Find all the essential fiberglass fenders, hoods, tailgates, gauge sets by Stewart Warner and Auto Meter, and vintage gas caps, in our online catalog. While you are there, check out our emblems and decals, rear and side view mirrors, windshields, fiberglass hoods and step plates. Don't forget about Speedway's vintage seats and seat belts for your classic truck, too!
$6.99More InfoBullet Shape License Plate Fasteners(Part #91004020)x
These bullet-shaped fasteners are chrome plated brass; over 1" long and 3/8" diameter at base. Washers, nut and 1 /4 " stud are bright plated to resist corrosion.
$119.99More InfoUniversal Long Fiberglass Floor Mount Console(Part #9001430)x
With these do-it-yourself interior components there's no limit to the creative uses you'll find! These fiberglass floor consoles allow you to customize your street rod's interior to suit your style.
- Fiberglass construction
- Long design floor mount console
- Can be painted, carpeted or upholstered
- 33.25" long x 8.5" wide x 6" tall
- Black gel coat
- Trim this flat bottomed console to custom fit your application
$49.99$74.99More Info1928-1929 Model A Roadster Door Latches, Pair(Part #91125002)x
These Model A door latches are designed for roadsters without outside door handles and have the chrome arm that sticks up to open the door. They feature quality steel construction with a painted finish and can be used on all 1928-1931 roadsters if not using outside handles.
- Steel Material
- Painted Finish
- Sold in pairs
$199.99More InfoDeluxe Shaved Door Handle Remote Entry Kit(Part #91069235)x
If your street rod doesn't have a remote entry system, you don't know what you're missing. This kit features a premium SPAL shaved door kit with Speedway billet door jam wire looms for a clean installation.
- Two massive 40 lb. pull solenoids
- Two 4-button transmitters
- One 7-channel receiver
- Two 1/2" billet door looms
- Two door poppers
- Hardware required for hookup
- Channel one and two have on-board relays built into the box. These channels are used to control door pop solenoids. All the other channels will need to have external relays added for function
910-69235 Instructions (PDF)
$8.99More InfoFender Welting(Part #75134601)x
Fender welting is a necessity for mounting fenders and body panels. Ours is made from black, crush grain vinyl and has a 3/16" diameter bead with a 1" flange. Comes in a 25 foot roll.
$8.99$10.67More InfoDEi 050220 Boom Mat Spray On Sound Deadening, 18 oz. Can(Part #35650220)xReduce unwanted road noise and deaden vibrations in hard to reach places with Boom Mat's new Spray On sound deadener. Works perfect for trunk interiors, fender wells, undercarriage, body panels, rear quarters, inside door panels, and many more. Boom Mat Spray On also works as a thermal barrier to insulate against unwanted heat. Will eliminate any unwanted sound, vibration, or heat in any vehicle!
- Reduce unwanted road noise and vibration
- Won't crack or chip
- Can be applied in multiple layers
- Helps prevent rust
- Paintable in 6 hours
- Single can will cover approximately 20 sq. ft.
- Handles temperatures up to 300 F
$29.99More InfoAluminized Heat and Noise Insulation Shield, Double Sided(Part #91080249)x
Aluminized heat shield is constructed of two layers of 99.5% pure grade industrial aluminum, laminated to 3/8" fiber tech padding to achieve highest reflection of radiant heat and sound deadening.
- Insulates against heat, noise and cold
- Mold and mildew proof
- Fire retardent
- Reflects 97% of infrared energy
- Fiberglass reinforced
- Double-sided aluminum backing
- 4' x 6' sheet
$163.99$192.99More InfoMSD 8963 Digital Programmable Shift Light(Part #5478963)x
The most universal and easy to use shift light available! Our new compact Digital Shift Light can be installed on everything from 1-cylinder points-triggered engines to Modular Ford engines with coil-on-plug technology.The tiny digital controller inside the compact housing gives you the ability to program the rpm activation points through the easy-to-view LED panel and two programming buttons. When the engine reaches the activation rpm, the six red LEDs illuminate brightly to alert your senses into throwing the shifter at the exact rpm. The DSL can be installed on single cylinder engines up through 12-cylinders on stock ignitions or high-powered aftermarket systems.
- š Installs with distributors, coil packs or coil-on-plug systems ranging from single to 12-cylinders. š Programmable from 100 - 15,900 rpm down to 10 rpm increments. š Six bright LEDs are easy to view in daylight and can be dimmed at night. š Supplied with an easy to install GMR pickup!
"Classic Truck, Body" Page 1 of 50
Page 1 of 50
EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each(Part #1412310)x
Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly High Back bucket seat (141-2300). EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.
- Thick padded high grade vinyl construction
- Designed for use with EMPI's Poly High Back seat (141-2300)
- Black with square pattern
- Snap fasteners
- Dual harness slots
$29.99More InfoSill Weather Whisker Strip(Part #91001928)x
After putting in new glass and window felt run channels, you don't want to reuse your old whisker that's on your garnish moldings, so here's a way to prevent scratching up that new glass. We now offer a 48" long, 9/16" tall whisker strip. Only offered in black.
$29.99More InfoSpeedway Fuel Level Gauge with Sender, 2-1/16 Inch(Part #91065042)x
These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face. The fuel sender comes with seal and and all mounting hardware.
- Overall Diameter: 2.25"
- Overall Length: 9.25"
- Includes sender
- 240 ohms empty, 33 ohms full
- Stainless steel bezel
- Backlit white face
- Replacement light socket assembly available # 910-65071
Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.
$574.99More InfoClassic Instruments 1947-53 Chevy Pickup White Gauge Set(Part #275602)x
Classic Instruments built this package to easily replace the gauges in your '47-'53 Chevy pickup. The gauges have a 140 mph electric speedometer, voltmeter, oil pressure, water temperature and fuel level. The fuel level gauge works with your stock '47-'53 Chevy 0-30 ohm sending unit. All other sending units are included.
$14.99$19.23More InfoDEi 050200 Boom Mat Damping Material, 12 x 12-1/2 Inch, 2 Sheets(Part #35650200)x
Please view the product's page for more information
$3.99More InfoUniversal Expanding Body Mounts(Part #715BM401)x
If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.
Not recommended for cars newer than 1934.
$39.99More InfoEMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern(Part #1412408)x
Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly Low Back bucket seat (141-2400). EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.
- Thick padded high grade vinyl construction
- Designed for use with EMPI's Poly Low Back seat (141-2400)
- Black with square pattern
- Snap fasteners
- Dual harness slots
$48.99$65.88More InfoDEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet(Part #35610393)x
Reflect-A-GOLD is a metalized polyamide polymer laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and remove.
Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.
- For firewalls, bulkheads, engine covers, floors, seat bottoms & more
- Capable of handling continual temperatures up to 850°F
- Resists UV degradation for long-term performance
- Virtually NO clearance needed
- Adhesive protected by a release liner rated up to 325°F
- Light weight and flexible-Trim to size
- Space age polymer material
- Reflects up to 850°F! Reflecting 80% of heat!
- Ultra light weight and self adhesive
$184.99More InfoHidden Tail Gate Latch w/ 21 Inch Straps(Part #91000021)x
The last thing you want on your tricked-out classic truck are beat-up old tailgate latches and rusty tailgate chains. This clean latch setup uses small stainless steel brackets that attach to the tailgate, stainless catch assemblies with spring-loaded nylon buttons that install in the bed sides, and woven nylon check straps to hold your tailgate open without damaging that expensive paint job. It's an easy-to-install system that works as nice as it looks and wont rust or rattle.
910-00021 Instructions (PDF)
$199.99More InfoOmega Kustom 20235 8000 RPM Tach, 5 Inch, Tan Face(Part #91120235)x
$170.99More InfoHushMat 20200 Silencer Megabond 1/4 In. Sound & Thermal Insulation Kit(Part #91080522)x
A HushMat Silencer Megabond ¼” Sound and Thermal Insulating Kit is universal and designed to treat two full size doors or one full sized headliner. HushMat Silencer Megabond reduces airborne noise and radiant heat through absorption.
- Silencer Megabond is formulated to withstand the automotive environment
- Withstands temperatures from -30 degrees up to +280 degrees Fahrenheit
- Absorbs airborne noise from 600 – 4000 Hz frequency
- Easy to mold around uneven surfaces
- Self Adhesive peel and stick – no secondary glue and NO spray
- Trims with razor knife or household scissors
Use HushMat Silencer Megabond 1/4" foam on the back side of the door trim panel and HushMat Ultra Door Kit (Speedway Part #
$599.99More InfoBolt-In 1947-54 Chevy Pickup Mustang II Crossmember(Part #91044754)x
Our bolt-in Mustang II suspension kit for 1947-1954 Chevy half-ton and 3/4 ton pickups includes all hardware and instructions.
- Completely bolt in - no welding required
- Based on proven Mustang II geometry
- Complete with bolt in boxing plates to reinforce the frame
- Interlocking design for ultimate strength
- Threaded adjusters to fine tune ride height
- Full lower A-arms required with this crossmember (strutless type)
- Requires the use of a power rack and pinion and tubular control arms
- NOT for use with air ride
910-44754 Instructions (PDF)Note: Use bolt-in motor mount kit 910-54754 to mount your S/B Chevy.
$44.99More InfoAuto Meter 1337 Arctic White Air-Core Water Temperature Gauge(Part #1821337)x
Auto Meter Arctic White Series gauges feature a vintage-style domed lens and a black bezel. Gauge illuminates via an incandescent bulb and "around the dial" lighting. Red and green bulb covers are included with temperature meter for a custom look.
- Includes 1/8" NPT Sender
- Includes 3/8"" NPT adapter/fitting
- Includes 1/2"" NPT adapter/fitting
$24.99More InfoStewart Warner 82311 Deluxe Ammeter Gauge, 2-1/16 Inch, 60-0-60 Amps(Part #66582311)x
Stewart Warner Deluxe 2-1⁄16" diameter ammeter gauges feature a black face, white letters and chrome bezel. A 12 volt light is included.
$3.99More Info1932 Ford Hood Latch, Black(Part #91132501)x
This is a reproduction rams horn handle for 1932 Fords. The latch comes with the hood side catch and all necessary hardware as well.
- Overall Height: 4"
- Spring loaded
- Reproduction for 1932 Fords
- Includes hood side catch and hardware
$399.99More InfoOmega Kustom 22085 Tan Face 5-Gauge Set, Electric Speedometer, 4-3/8(Part #91122085)x
Omega Kustom Instruments produces the most advanced speedometers and auxilary gauges available anywhere. All of Omega Kustom’s instruments have the finest movements available today and the latest lighting technology. Each gauge in the kit is surrounded by polished stainless steel bezels and real glass lenses.
Each Timeless Tan Series set includes:
- 4-3/8" Speedometer (electric w/ GM style sender)
- 2-1/16" Fuel Level (w/ sender)
- 2-1/16" Water Temp (electric w/ sender)
- 2-1/16" Oil Pressure (electric w/ sender)
- 2-1/16" Voltmeter
$29.99More Info1964-66 Chevy Pickup Switch Panel Cover(Part #91023664)x
These billet aluminum switch panel covers are made to fit your 1964-1966 Chevy pickup truck dash. They are designed to fit in place of your switches for a new styled sleek look.
- Billet aluminum
- 1964-1966 Chevy Pickup
- Switch eliminator panel
$69.99More InfoSpeedway Electric Speedometer, 3-3/8 Inch Diameter(Part #91065051)x
These electric speedometers are perfect for your rod or race project. They feature a white face with bold black lettering and a bright orange needle for quick monitoring. Our 0-160 mph speedometers also come with a stainless steel bezel and a complete installation kit. This speedometer will work with either a 16 or an 8 ppm sender. There are two calibration modes, the first of which asks you to drive a measured mile and the speedometer will detect the frequency of the sender. The other mode allows you to enter the pulses per mile of your sender.
- 3-3/8” body diameter
- 3-3/4 ” bezel
- Overall Diameter: 3-3/4"
- Body Length: 1.60"
- Stud Length: 1.00"
- Backlit white face with black lettering
- Orange needle
- 0-160 mph range
- Stainless steel bezel
- Includes installation kit
- Compatible with almost any sender EXCEPT the Sky Driver GPS signal generator by Classic Instruments
- SENDER NOT Included
- Replacement light socket assembly available # 910-65075
$81.99$103.95More InfoLokar IDH-2010 Brushed Billet Alum Door Handles, Ford Pre-1949, Pair(Part #491IDH2010)x
- Splined Arms for fine adjustment
- Available for most GM and Ford Applications
- Windowed Arms match other quality Lokar products
- Hidden set screws
$79.99More Info1935-37 Ford Pickup Rear Fender Filler Panel(Part #9003541)x