Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Classic Truck Body, Interior, Gauges At Speedway Motors

Speedway Motors is the classic pickup truck source for body parts, gauges, and interior accessories! Find all the essential fiberglass fenders, hoods, tailgates, gauge sets by Stewart Warner and Auto Meter, and vintage gas caps, in our online catalog. While you are there, check out our emblems and decals, rear and side view mirrors, windshields, fiberglass hoods and step plates. Don't forget about Speedway's vintage seats and seat belts for your classic truck, too!

Featured Products
Speedway Economy 12 Circuit Wiring Harness
Speedway Economy 12 Circuit Wiring Harness
(Part #91064017)
x
            

This harness was designed to offer you all the highest quality components in a package designed for cars with minimum accessories. Each wire is color coded and labeled every few inches.

Our prewired 12 circuit kit will fit all your basic needs and makes wiring a painless process. It is designed especially for the street rod without accessories. It also includes horn relay and connector, turn and hazard signals, dimmer switch connector, circuit breaker for headlights, two flashers, one alternator plug, two ignition switch connectors, plus more.

  • Mainfuse box base is 1-7/8" x 3-11/16"
  • Box height is 3-3/4"
12 Circuit Wiring Harness Installation Instructions (PDF)
Dynamat 10455 Xtreme Bulk Pack Cut-to-Fit Thermal and Sound Insulation
Dynamat 10455 Xtreme Bulk Pack Cut-to-Fit Thermal and Sound Insulation
(Part #31010455)
x
            

Reduce road noise and vibration while making your stereo sound twice as good fast with Dynamat. By first laying down a layer of Dynamat Xtreme, you will make your car quiet and cooler. Add another layer of Dynaliner and you will make it even cooler. Or a layer of Dynapad and make it quieter. A Dyna-Roller will make installation easy. 

Kit contains nine 18" x 32" pieces (36 square feet) of Dynamat Xtreme (.067" thick) for rear decks, doors, floors and trunk floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels, under-hood installations and multi-purpose use.

Simply measure your application to order the necessary amount. This product dramatically cuts heat and noise from inside the vehicle for more enjoyable cruising and every day driving.

  • Use to get more bass, more music, lower road noise and better sound
  • Kit contains (9) nine 18" x 32" pieces (36 square feet)
  • Simply measure and cut to fit your application

Dynamat Information Sheet (PDF)

Dynamat Tech Spec Sheet (PDF)

Low Back Vinyl Bucket Seats
From: $229.99
Product Rating: 4.61 Stars
Low Back Vinyl Bucket Seats
(Part #9101400)
x
            

If you are like us, it's hard to find bucket seats small enough to fit in your car. These bucket seats are 24" tall, 20-1/2" wide and 20" deep overall and the back adjusts to your preference. The seat back will also fold forward for easy access to the rear of the vehiclce. Each seat includes a pair of sliders, but universal mount # 910-8115-side is sold separately (shown below).

  • @ front of seat, 7 3/4" from mounting plate to top of cusion
  • @ rear of seat,  5 1/2" from mounting plate to top of cusion
Seat bottom features female threaded mounting holes with the following dimension that corresponds to the included seat sliders:
  • 14-1/2" center to center spacing for side to side bolt pattern 
  • 11-9/16" center to center spacing for front to back bolt pattern

Choose black or beige vinyl and LH or RH side. 

Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
(Part #91064027)
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

Note: The connectors on the ribbon plug that go to the steering column include male connectors for use with a non-keyed steering column. If you have a keyed steering column, you'll need to purchase an additional adapter, such as 91064040 or 91064039.

"Classic Truck, Body" Page 1 of 25

  • EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    (Part #1412310)
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly High Back bucket seat (141-2300).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly High Back seat (141-2300)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • Sill Weather Whisker Strip
    $29.99
    Sill Weather Whisker Strip
    (Part #91001928)
    x
                After putting in new glass and window felt run channels, you don't want to reuse your old whisker that's on your garnish moldings, so here's a way to prevent scratching up that new glass. We now offer a 48" long, 9/16" tall whisker strip. Only offered in black.
            
  • Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    (Part #91065042)
    x
                

    These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face.  The fuel sender comes with seal and and all mounting hardware.

    • 2-1/16”
    • Overall Diameter: 2.25"
    • Overall Length: 9.25"
    • Includes sender
    • 240 ohms empty, 33 ohms full
    • Stainless steel bezel
    • Backlit white face
    • Replacement light socket assembly available # 910-65071

    Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.

  • Auto Meter 201009 Cobra Voltmeter Gauge, Short Sweep Electric, 2 Inch
    Auto Meter 201009 Cobra Voltmeter Gauge, Short Sweep Electric, 2 Inch
    (Part #182201009)
    x
                

    This vintage instrument series is designed to accurately re-create the period correct details of the instruments used in the original Cobra Roadster while incorporating the latest technology advancements in performance gauges from Auto Meter. These black dial face instruments feature incandescent through the dial backlighting with white pointers, traditional numbers and tick marks, and are finished with flat glass and scalloped chrome bezels.

    • Short Sweep Electric Voltmeter
    • 8-18 V
    • Mounts in 2-1/16" Hole
    • Includes mounting hardware and Incandescent Backlighting
    • Requires 18 gauge electrical wire and ring or spade terminal connections for installation (not included)
  • Classic Instruments 1947-53 Chevy Pickup White Gauge Set
    Classic Instruments 1947-53 Chevy Pickup White Gauge Set
    (Part #275602)
    x
                

    Classic Instruments built this package to easily replace the gauges in your '47-'53 Chevy pickup. The gauges have a 140 mph electric speedometer, voltmeter, oil pressure, water temperature and fuel level. The fuel level gauge works with your stock '47-'53 Chevy 0-30 ohm sending unit. All other sending units are included.

     

    Classic Instruments Installation Manual (PDF)

  • DEi 050200 Boom Mat Damping Material, 12 x 12-1/2 Inch, 2 Sheets
    DEi 050200 Boom Mat Damping Material, 12 x 12-1/2 Inch, 2 Sheets
    (Part #35650200)
    x
                Please view the product's page for more information
            
  • Classic Instruments Speedometer Gauge Set, V8 Speedster Face
    Classic Instruments Speedometer Gauge Set, V8 Speedster Face
    (Part #2751018)
    x
                

    Tom Gale, formerly Chief Designer of the Daimler Chrysler Corporation, has led the Classic Instruments design team in the production of a beautiful new series. Designed with unique dial faces that are spun and engine turned aluminum. The pointers for this series is a new design and each pointer is chrome painted. The face has a chrome V8 emblem signifying American Hot Rod Heritage. The light diffusers have laser etched indices lining up with the indices on the gauge faces.

    The V8 Red Steelie series features a vivid red background with spun aluminum numbers and accent graphics that brightly bounce off the red background. The series also features the uniquely designed pointer for the V8 line which is chrome plated and balanced for precision accuracy. Additional details within the instruments are laser etched markings on the light diffuser ring which add a level of dimension and functionality. The etching corresponds with the indices on the face and flow into a polished stainless high step bezel that is crimped around a optic grade curved lens to complete the overall design.

    • Black "V8 Speedster" face design or Red "V8 Red Steelie" face design
    • Kit includes 3-3/8" Speedo & Tach, 2-1/8" Fuel, Oil, Temp, Volts
    • Standard GM sender pack included

    Classic Instruments Installation Manual (PDF)

  • Universal Expanding Body Mounts
    Universal Expanding Body Mounts
    (Part #715BM401)
    x
                

    If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.

    Not recommended for cars newer than 1934.

  • EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern
    EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern
    (Part #1412408)
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly Low Back bucket seat (141-2400).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly Low Back seat (141-2400)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • Hidden Tail Gate Latch w/ 21 Inch Straps
    Hidden Tail Gate Latch w/ 21 Inch Straps
    (Part #91000021)
    x
                

    The last thing you want on your tricked-out classic truck are beat-up old tailgate latches and rusty tailgate chains. This clean latch setup uses small stainless steel brackets that attach to the tailgate, stainless catch assemblies with spring-loaded nylon buttons that install in the bed sides, and woven nylon check straps to hold your tailgate open without damaging that expensive paint job. It's an easy-to-install system that works as nice as it looks and wont rust or rattle.

    910-00021 Instructions (PDF)

  • Omega Kustom 20235 8000 RPM Tach, 5 Inch, Tan Face
    Omega Kustom 20235 8000 RPM Tach, 5 Inch, Tan Face
    (Part #91120235)
    x
                

    Omega Kustom tachometers are made in the U.S.A. with a 3 year warranty. Features a stainless steel bezel, anti-scratch glass lens, precision movements, plastic case, and adjustable brackets.

    Omega Kustom Tach Gauge Installation Instructions (PDF)

    Gauge Mounting Information (PDF)

  • HushMat 20200 Silencer Megabond 1/4 In. Sound & Thermal Insulation Kit
    HushMat 20200 Silencer Megabond 1/4 In. Sound & Thermal Insulation Kit
    (Part #91080522)
    x
                

    A HushMat Silencer Megabond ¼” Sound and Thermal Insulating Kit is universal and designed to treat two full size doors or one full sized headliner. HushMat Silencer Megabond reduces airborne noise and radiant heat through absorption.

    • Silencer Megabond is formulated to withstand the automotive environment
    • Withstands temperatures from -30 degrees up to +280 degrees Fahrenheit
    • Absorbs airborne noise from 600 – 4000 Hz frequency
    • Easy to mold around uneven surfaces
    • Self Adhesive peel and stick – no secondary glue and NO spray
    • Trims with razor knife or household scissors
    HushMat Door Kit contains two (2) 23” x 36” sheets or 11.5 Square Feet of OEM Approved foam insulating material.

    Use HushMat Silencer Megabond 1/4" foam on the back side of the door trim panel and HushMat Ultra Door Kit (Speedway Part #

  • Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember
    Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember
    (Part #91044754)
    x
                

    Our bolt-in Mustang II suspension kit for 1947-1954 Chevy half-ton and 3/4 ton pickups includes all hardware and instructions. 

    • Completely bolt in - no welding required
    • Based on proven Mustang II geometry
    • Complete with bolt in boxing plates to reinforce the frame
    • Interlocking design for ultimate strength
    • Threaded adjusters to fine tune ride height
    • Full lower A-arms required with this crossmember (strutless type)
    • Requires the use of a power rack and pinion and tubular control arms
    • NOT for use with air ride

    910-44754 Instructions (PDF)

    Note:  Use bolt-in motor mount kit 910-54754 to mount your S/B Chevy.
  • Stewart Warner 82311 Deluxe Ammeter Gauge, 2-1/16 Inch, 60-0-60 Amps
    Stewart Warner 82311 Deluxe Ammeter Gauge, 2-1/16 Inch, 60-0-60 Amps
    (Part #66582311)
    x
                Stewart Warner Deluxe 2-1⁄16" diameter ammeter gauges feature a black face, white letters and chrome bezel. A 12 volt light is included.
            
  • 1932 Ford Hood Latch, Black
    $3.99
    Product Rating: 4.50 Stars
    1932 Ford Hood Latch, Black
    (Part #91132501)
    x
                

    This is a reproduction rams horn handle for 1932 Fords. The latch comes with the hood side catch and all necessary hardware as well.

    • Overall Height: 4"
    • Spring loaded
    • Reproduction for 1932 Fords 
    • Includes hood side catch and hardware
  • Omega Kustom 22085 Tan Face 5-Gauge Set, Electric Speedometer, 4-3/8
    Omega Kustom 22085 Tan Face 5-Gauge Set, Electric Speedometer, 4-3/8
    (Part #91122085)
    x
                

    Omega Kustom Instruments produces the most advanced speedometers and auxilary gauges available anywhere. All of Omega Kustom’s instruments have the finest movements available today and the latest lighting technology. Each gauge in the kit is surrounded by polished stainless steel bezels and real glass lenses.

    Each Timeless Tan Series set includes:

    • 4-3/8" Speedometer (electric w/ GM style sender)
    • 2-1/16" Fuel Level (w/ sender)
    • 2-1/16" Water Temp (electric w/ sender)
    • 2-1/16" Oil Pressure (electric w/ sender)
    • 2-1/16" Voltmeter

    Omega Gauge Installation Instructions (PDF)

    Gauge Mounting Information (PDF)

  • 1964-66 Chevy Pickup Switch Panel Cover
    1964-66 Chevy Pickup Switch Panel Cover
    (Part #91023664)
    x
                

    These billet aluminum switch panel covers are made to fit your 1964-1966 Chevy pickup truck dash.  They are designed to fit in place of your switches for a new styled sleek look.

    • Billet aluminum
    • 1964-1966 Chevy Pickup
    • Switch eliminator panel
  • Painless Wiring 10104 21 Circuit GM Pickup Chassis Wiring Harness
    New
    Painless Wiring 10104 21 Circuit GM Pickup Chassis Wiring Harness
    (Part #91010104)
    x
                

    This customizable 21 circuit - 12 fuse w/ horn relay and Maxi Fuse pickup chassis wiring harness is made from Painless Performance. You'll find that the ample wire lengths make this kit especially suited for trucks with long beds and extended cabs.  These Painless wiring harnesses feature many pre-wired connections and are color coded to make installation a snap. Included with this harness are the following parts: a GM engineered fuse block & Painless mounting bracket, GM turn signal connectors, pre-wire plugs for the headlights, and a dimmer switch. Application intended for non-fuel injected engine and a non-electronic transmission.

    Includes Circuits for:

    • A/C & Heat
    • Accessory / Cigarette Lighter
    • Backup Lights
    • Brake Lights
    • Charging
    • Dome Light
    • Electric Choke
    • Emergency Flashers
    • Fan Relay Activation Power
    • Fused Power Source
    • Headlights
    • Horn (Relay)
    • Ignition Coil
    • Instrument Panel Lighting and Gauges ( Included wires for: fuel gauge, oil gauge, tachometer, temperature gauge, and voltmeter)
    • Park Lights
    • Radio/Clock (Constant and Switched) 
    • Starting
    • Tail Lights
    • Third Brake Light
    • Turn Signals
    • Wipers

    Connectors included:

    • GM Steering Column Turn Switch
    • Two Headlight Pigtails
    • 10SI & 12 SI Alternator
    • Dimmer Switch

  • Speedway Electric Speedometer, 3-3/8 Inch Diameter
    Speedway Electric Speedometer, 3-3/8 Inch Diameter
    (Part #91065051)
    x
                These electric speedometers are perfect for your rod or race project. They feature a white face with bold black lettering and a bright orange needle for quick monitoring.  Our 0-160 mph speedometers also come with a stainless steel bezel and a complete installation kit. 
    • 3-3/8” body diameter
    • 3-3/4 ” bezel
    • Overall Diameter: 3-3/4"
    • Body Length: 1.60"
    • Stud Length: 1.00"
    • Backlit white face with black lettering
    • Orange needle
    • Electric
    • 0-160 mph range
    • Stainless steel bezel
    • Includes installation kit
    • SENDER NOT Included
    • Replacement light socket assembly available # 910-65075

    Instructions (PDF)

  • Lokar IDH-2010 Brushed Billet Alum Door Handles, Ford Pre-1949, Pair
    Lokar IDH-2010 Brushed Billet Alum Door Handles, Ford Pre-1949, Pair
    (Part #491IDH2010)
    x
                
    • Splined Arms for fine adjustment
    • Available for most GM and Ford Applications
    • Windowed Arms match other quality Lokar products
    • Hidden set screws
  • 1935-37 Ford Pickup Rear Fender Filler Panel
    1935-37 Ford Pickup Rear Fender Filler Panel
    (Part #9003541)
    x
                
            
  • Lokar XIDH-2025 Midnight Series Lakester Door Handles, GM/Ford 1949-Up
    Lokar XIDH-2025 Midnight Series Lakester Door Handles, GM/Ford 1949-Up
    (Part #491XIDH2025)
    x
                
    • Nostalgia Styling
    • Steel Splined Arms for a full 360 fine adjustment
    • Hidden set screws
    • Available in chrome, black and raw finish
    • Matches Lakester Throttle Pedal and Brake Pedal sets
    • Available for most Ford and GM Applications
    • Windowed Arms match other quality Lokar products
    • Hidden set screws
  • Classic Instruments AN80SHC All American Series Nickel Tach
    Classic Instruments AN80SHC All American Series Nickel Tach
    (Part #275202)
    x
                

    Classic Instruments teamed up with Tom Gale, who was Chief Designer at Chrysler, to produce these beautiful gauges. They feature curved glass, polished stainless bezel, a raised logo and the vintage appearance you are looking for. The tach is 3-3/8".

     Classic Instruments Installation Manual (PDF)

  • Rubber GM Transmission Cushion
    Rubber GM Transmission Cushion
    (Part #91018016)
    x
                

    OEM-style rubber transmission cushion for many '58-'82 GM transmissions including TH350 auto, Muncie, Saginaw, and others.

    • Meets or exceeds OEM specifications 
    • Rubber formulation provides abrasion resistance and aging stability
    • Tough, hardened steel plate & inserts
    • Chemlock® bonding agent ensures superior rubber-to-metal bond
  • Lokar IDP-2005 Polished Billet Arm Rest Door Pulls, Pair
    Lokar IDP-2005 Polished Billet Arm Rest Door Pulls, Pair
    (Part #491IDP2005)
    x
                Two screw installation, Stainless Screws included
    • Deep pocket - 4 finger width
    • Designed to recess in arm rest
    • Mounting bracket included
    • Sold in pairs
    • Complements Lokar Door Handles, Pedals and Dash Inserts
  • 1933-34 Ford Pickup Fiberglass Front Splash Apron
    1933-34 Ford Pickup Fiberglass Front Splash Apron
    (Part #9003428)
    x
                

    Fiberglass front frame horn cover. Features a glossy gelcoat finish that is ready for paint preparations.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.  

  • Lokar XIDH-2022 Midnight Series Vent Window Cranks, Ford Pre-1949
    Lokar XIDH-2022 Midnight Series Vent Window Cranks, Ford Pre-1949
    (Part #491XIDH2022)
    x
                
    • Splined Arms for fine adjustment
    • Available for Ford Applications
    • Windowed Arms match other quality Lokar products
    • Hidden set screws
    • Available in brushed, polished or black finish
  • Auto Meter 1202 American Muscle Five Gauge Set
    Auto Meter 1202 American Muscle Five Gauge Set
    (Part #1821202)
    x
                

    Auto Meter has hit a home run with their new American Muscle gauge kit. The distinctive look features LED illumination, glowing red pointers, chrome bezel and spun aluminum dials. The five gauge set includes a 3-3/8" electric speedometer and 2-1/16" water, oil, volt and fuel gauges.

    • Gauge Ranges: 160 MPH / 100 PSI / 100-250 deg. F / 8-18 Volts / 240ΩE-33ΩF
    • Tach (sold separately) operates on 4, 6, or 8 cylinder engines with points, electronic, and most 12V high performance racing ignitions

    Includes all sending units.

    In-Dash Gauge Installation Instructions (PDF)

  • Scat ProCar Rally Bucket Seats with Houndstooth Inserts
    Scat ProCar Rally Bucket Seats with Houndstooth Inserts
    (Part #91070047)
    x
                The ProCar Rally bucket seat by Scat Enterprizes features OEM grade fabric and vinyl with map pockets and easy adjustment reclining levers.  Available in left or right side styles.
    • Sliders included
    • Adjustable headrest
    • Adjustable incline or recline
    • High quality TIG welded steel frame
    • High quality injected molded foam
    • Seat adaptors available for most models
    • OEM grade houndstooth center
    • Choose left or right side versions
  • Linear Actuator Controller for 12 Volt Actuator
    Linear Actuator Controller for 12 Volt Actuator
    (Part #91064295)
    x
                

    This linear actuator controller limits exactly how far the actuator moves. It can be programmed to move the actuator to any of three determined preset positions and features an indicator light that shows for each of these custom presets until unit is currently positioned. Once programmed, the display unit can be removed to add three momentary switches (not included) to make the actuator move to the preset positions at the flip of a switch.  This linear actuator controller is designed to be used with a 12 volt actuator.

    • Limits exactly how far the actuator moves
    • 3 programmable settings and 3 negative inputs
    • Indicator light
    • Controls (1) actuator
    • Designed to be used with a 12 volt actuator
    • Intended for use with our actuator 910-64290
    • Controller kit includes:
      • Central control unit
      • User input display
      • Two wiring harnesses
      • Mounting hardware and instructions 

    910-64295 Instructions (PDF)

  • Classic Instruments VT09GSLF-D Vintage Fuel Level Gauge
    Classic Instruments VT09GSLF-D Vintage Fuel Level Gauge
    (Part #275309)
    x
                

    Requires tank-mounted sender #275235. 2-1/8" diameter.

    Vintage Series Gauges: feature 24 carat gold plated bezels, with parchment faces and brown numbers with old-fashion style red pointers.

    Classic Instruments Installation Manual (PDF)

  • TH350 Transmission Cushion Mount-Polyurethane
    TH350 Transmission Cushion Mount-Polyurethane
    (Part #91025820)
    x
                

    Heavy duty Turbo 350 polyurethane replacement for original GM mounts. Features a built-in safety lock to prevent separation. For race or street race use.

    Fits "most" GM transmissions having a mount on the tailshaft. The bolt spacing for the tranny mount will accomodate 3-3/4" to 4-1/4" bolt pattern on the transmission. For TH350 application.

  • Lokar XIDH-2006 Midnight Series Billet Alum Door Handles, GM Pre-1949
    Lokar XIDH-2006 Midnight Series Billet Alum Door Handles, GM Pre-1949
    (Part #491XIDH2006)
    x
                
    • Splined Arms for fine adjustment
    • Available for GM Applications
    • Windowed Arms match other quality Lokar products
    • Hidden set screws
    • Available in brushed, polished or black finish
  • Fuelab 71501 Fuel Pressure Gauge, 0-120 PSI
    Fuelab 71501 Fuel Pressure Gauge, 0-120 PSI
    (Part #91071501)
    x
                

    FueLab mechanical fuel pressure gauges featurea black housing with a white face and black text.

    • For use on regulators or fuel rails with gauge ports
    • Direct mount 1/8” NPT fitting
    • 1.5” diameter gauge face
    • Not for use in passenger or driver’s compartments
  • Lokar IDH-2026 Lakester Chromed Steel Door Handles, Ford Pre-1949
    Lokar IDH-2026 Lakester Chromed Steel Door Handles, Ford Pre-1949
    (Part #491IDH2026)
    x
                 
    • Steel Splined Arms for a full 360 fine adjustment
    • Matches Lakester Throttle Pedal and Brake Pedal sets
    • Available for most GM and Ford applications
    • Windowed Arms match other quality Lokar products
    • Hidden set screws
  • 1937-38 Chevy 5-Gauge Dash Panel
    1937-38 Chevy 5-Gauge Dash Panel
    (Part #9100537)
    x
                

    Brighten up your Chevy's dash and take advantage of modern instruments with these polished aluminum dash panels.  Gauge panels are set up for 3-3/8" speedometers and 2-1/16" accessory gauges.  Gauges sold separately. 

    Panels has a 3/16" lip around the back side of the whole panel to catch the opening in the dash

    910-0537

    • 4-1/16" x 11-7/8"
  • BedWood Extruded Aluminum Bed Strip Set for 1954-55 Chevy 3600 LWB
    BedWood Extruded Aluminum Bed Strip Set for 1954-55 Chevy 3600 LWB
    (Part #1682201)
    x
                

    These BedStrips™ with hidden fasteners are extruded aluminum, show polished, bright anodized, trimmed to length for your particular application, and ready to install into the stock grooves. Includes stainless hidden fasteners. Made in the USA.

    • Designed for use with bed wood kits for 1954-55 Chevy 3600 LWB stepside pickups 
    • Choose between "Speed-bump" or "Flat-top" style strip kits
    • Includes hidden fasteners
    • Extruded aluminum
    • Made in U.S.A.
  • Hagan M-ARM-32 Fattie Rear-View Mirror Arm, 32 Roadster Windshield
    Hagan M-ARM-32 Fattie Rear-View Mirror Arm, 32 Roadster Windshield
    (Part #174007)
    x
                

    This interior rear-view mirror arm will bolt directly to a 1932 Ford style windshield frame.  They feature 3/8-24 threads and come in a show polished finish.

    • Thread is 3/8-24
    • Comes in a show polished finish
    • Sold individually
  • Dual Billet A/C Vent, 30 Degree Bezel
    Dual Billet A/C Vent, 30 Degree Bezel
    (Part #9103034)
    x
                

    Give your dash some class with these distinctive oval-shaped A/C vents. They feature machined billet aluminum bezels with stainless steel vents for easy upkeep. Features dual-outlet vents and a 30-degree angle-cut bezel.

    Vents accept standard 2-1/2" A/C hoses and include brackets. Bezel measures 7-1/2" x 2".

  • Auto Meter 880088 Ford Series 3-1/8 Tachometer
    Auto Meter 880088 Ford Series 3-1/8 Tachometer
    (Part #1828888)
    x
                

    Won’t this gauge look sweet in your Ford hot rod? This 3-1/8" diameter Auto Meter tachometer has a vintage look that includes the Ford logo. Features a vintage-style domed lens and white gauge face. Designed to mount into your dash.

    Operates on 4, 6, or 8 cylinder engines with points, electronic, and most 12V high performance racing ignitions.

    Tach Wiring Guide (Link)

     

     

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25