Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Body

Shop Classic Truck Body, Interior, Gauges At Speedway Motors

Speedway Motors is the classic pickup truck source for body parts, gauges, and interior accessories! Find all the essential fiberglass fenders, hoods, tailgates, gauge sets by Stewart Warner and Auto Meter, and vintage gas caps, in our online catalog. While you are there, check out our emblems and decals, rear and side view mirrors, windshields, fiberglass hoods and step plates. Don't forget about Speedway's vintage seats and seat belts for your classic truck, too!

Featured Products
  • Bullet Shape License Plate Fasteners
    Bullet Shape License Plate Fasteners
    (Part #91004020)
    x
                These bullet-shaped fasteners are chrome plated brass; over 1" long and 3/8" diameter at base. Washers,  nut and 1 /4 " stud are bright plated to resist corrosion.
            
  • Universal Long Fiberglass Floor Mount Console
    Universal Long Fiberglass Floor Mount Console
    (Part #9001430)
    x
                With these do-it-yourself interior components there's no limit to the   creative uses you'll find! These fiberglass floor consoles allow you   to customize your street rod's interior to suit your style. 
    • Fiberglass construction
    • Long design floor mount console
    • Can be painted, carpeted or upholstered
    • 33.25" long x 8.5" wide x 6" tall
    • Black gel coat
    • Trim this flat bottomed console to custom fit your application
  • Deluxe Shaved Door Handle Remote Entry Kit
    Deluxe Shaved Door Handle Remote Entry Kit
    (Part #91069235)
    x
                If your street rod doesn't have a remote entry system, you don't know what you're missing. This kit features a premium SPAL shaved door kit with Speedway billet door jam wire looms for a clean installation.   
    • Two massive 40 lb. pull solenoids
    • Two 4-button transmitters
    • One 7-channel receiver
    • Two 1/2" billet door looms
    • Two door poppers
    • Hardware required for hookup
    • Channel one and two have on-board relays built into the box. These channels are used to control door pop solenoids. All the other channels will need to have external relays added for function

    910-69235 Instructions (PDF)

  • Fender Welting
    $8.99
    Product Rating: 4.92 Stars
    Fender Welting
    (Part #75134601)
    x
                

    Fender welting is a necessity for mounting fenders and body panels. Ours is made from black, crush grain vinyl and has a 3/16" diameter bead with a 1" flange. Comes in a 25 foot roll.

  • DEi 050220 Boom Mat Spray On Sound Deadening, 18 oz. Can
    DEi 050220 Boom Mat Spray On Sound Deadening, 18 oz. Can
    (Part #35650220)
    x
                
    Reduce unwanted road noise and deaden vibrations in hard to reach places with Boom Mat's new Spray On sound deadener. Works perfect for trunk interiors, fender wells, undercarriage, body panels, rear quarters, inside door panels, and many more. Boom Mat Spray On also works as a thermal barrier to insulate against unwanted heat. Will eliminate any unwanted sound, vibration, or heat in any vehicle!
    • Reduce unwanted road noise and vibration
    • Won't crack or chip
    • Can be applied in multiple layers
    • Helps prevent rust
    • Paintable in 6 hours
    • Single can will cover approximately 20 sq. ft.
    • Handles temperatures up to 300 F
  • Wehrs Machine WM259NF Gun Drilled Hood Pin w/o Flange, 1/2-20 Thread
    New
    Wehrs Machine WM259NF Gun Drilled Hood Pin w/o Flange, 1/2-20 Thread
    (Part #910452592)
    x
                

    These lightweight aluminum 1/2"-20 fine thread gun drilled hood pin comes without a flange and is 4" tall.

    • 1/2"-20 Thread Pitch
    • 3" Thread Length
    • RH Male Threads
    • No Flange
    • Aluminum Material Type
    • Anodized Finish
    • Sold Individually

     

  • Auto Meter 1420 Designer Black 5 Piece Mechanical Gauge Kit
    New
    Auto Meter 1420 Designer Black 5 Piece Mechanical Gauge Kit
    (Part #1821420)
    x
                Auto Meter has brought together the most popular gauges into a simple kit. The kit includes a speedometer, water temperature, oil pressure, fuel level, and voltmeter. All senders included where applicable.
    • Speedometer, water temperature, oil pressure, fuel level, and voltmeter
    • Sold as kit
    • Range: 120 MPH/100 PSI/100-250 °F/8-18V/240ΩE-33ΩF

    Installation Instructions (1) (PDF)

    Installation Instructions (2) (PDF)

  • Aluminized Heat and Noise Insulation Shield, Double Sided
    Aluminized Heat and Noise Insulation Shield, Double Sided
    (Part #91080249)
    x
                

    Aluminized heat shield is constructed of two layers of 99.5% pure grade industrial aluminum, laminated to 3/8" fiber tech padding to achieve highest reflection of radiant heat and sound deadening. 

    • Insulates against heat, noise and cold 
    • Mold and mildew proof
    • Fire retardent
    • Reflects 97% of infrared energy
    • Fiberglass reinforced
    • Double-sided aluminum backing
    • 4' x 6' sheet

Filter

"Classic Truck, Body" Page 1 of 50

Page 1 of 50

  • EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    (Part #1412310)
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly High Back bucket seat (141-2300).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly High Back seat (141-2300)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • Sill Weather Whisker Strip
    $29.99
    Sill Weather Whisker Strip
    (Part #91001928)
    x
                After putting in new glass and window felt run channels, you don't want to reuse your old whisker that's on your garnish moldings, so here's a way to prevent scratching up that new glass. We now offer a 48" long, 9/16" tall whisker strip. Only offered in black.
            
  • Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    (Part #91065042)
    x
                

    These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face.  The fuel sender comes with seal and and all mounting hardware.

    • 2-1/16”
    • Overall Diameter: 2.25"
    • Overall Length: 9.25"
    • Includes sender
    • 240 ohms empty, 33 ohms full
    • Stainless steel bezel
    • Backlit white face
    • Replacement light socket assembly available # 910-65071

    Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.

  • Auto Meter 201009 Cobra Air-Core Voltmeter Gauge, 2-1/16 Inch
    Auto Meter 201009 Cobra Air-Core Voltmeter Gauge, 2-1/16 Inch
    (Part #182201009)
    x
                

    This vintage instrument series is designed to accurately re-create the period correct details of the instruments used in the original Cobra Roadster while incorporating the latest technology advancements in performance gauges from Auto Meter. These black dial face instruments feature incandescent through the dial backlighting with white pointers, traditional numbers and tick marks, and are finished with flat glass and scalloped chrome bezels.

    • Short Sweep Electric Voltmeter
    • 8-18 V
    • Mounts in 2-1/16" Hole
    • Includes mounting hardware and Incandescent Backlighting
    • Requires 18 gauge electrical wire and ring or spade terminal connections for installation (not included)
  • Classic Instruments 1947-53 Chevy Pickup White Gauge Set
    Classic Instruments 1947-53 Chevy Pickup White Gauge Set
    (Part #275602)
    x
                

    Classic Instruments built this package to easily replace the gauges in your '47-'53 Chevy pickup. The gauges have a 140 mph electric speedometer, voltmeter, oil pressure, water temperature and fuel level. The fuel level gauge works with your stock '47-'53 Chevy 0-30 ohm sending unit. All other sending units are included.

     

    Classic Instruments Installation Manual (PDF)

  • DEi 050200 Boom Mat Damping Material, 12 x 12-1/2 Inch, 2 Sheets
    DEi 050200 Boom Mat Damping Material, 12 x 12-1/2 Inch, 2 Sheets
    (Part #35650200)
    x
                Please view the product's page for more information
            
  • Classic Instruments Speedometer Gauge Set, V8 Speedster Face
    Classic Instruments Speedometer Gauge Set, V8 Speedster Face
    (Part #2751018)
    x
                

    Tom Gale, formerly Chief Designer of the Daimler Chrysler Corporation, has led the Classic Instruments design team in the production of a beautiful new series. Designed with unique dial faces that are spun and engine turned aluminum. The pointers for this series is a new design and each pointer is chrome painted. The face has a chrome V8 emblem signifying American Hot Rod Heritage. The light diffusers have laser etched indices lining up with the indices on the gauge faces.

    The V8 Red Steelie series features a vivid red background with spun aluminum numbers and accent graphics that brightly bounce off the red background. The series also features the uniquely designed pointer for the V8 line which is chrome plated and balanced for precision accuracy. Additional details within the instruments are laser etched markings on the light diffuser ring which add a level of dimension and functionality. The etching corresponds with the indices on the face and flow into a polished stainless high step bezel that is crimped around a optic grade curved lens to complete the overall design.

    • Black "V8 Speedster" face design or Red "V8 Red Steelie" face design
    • Kit includes 3-3/8" Speedo & Tach, 2-1/8" Fuel, Oil, Temp, Volts
    • Standard GM sender pack included

    Classic Instruments Installation Manual (PDF)

  • Universal Expanding Body Mounts
    Universal Expanding Body Mounts
    (Part #715BM401)
    x
                

    If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.

    Not recommended for cars newer than 1934.

  • EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern
    EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern
    (Part #1412408)
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly Low Back bucket seat (141-2400).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly Low Back seat (141-2400)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    (Part #35610393)
    x
                Reflect-A-GOLD is a metalized polyamide  polymer laminated glass cloth with a high temperature pressure sensitive  adhesive for use in extreme temperature swing environments. It is  lightweight and easy to apply and remove. 

    Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.

    • For firewalls, bulkheads, engine covers, floors, seat bottoms & more
    • Capable of handling continual temperatures up to 850°F
    • Resists UV degradation for long-term performance
    • Virtually NO clearance needed
    • Adhesive protected by a release liner rated up to 325°F
    • Light weight and flexible-Trim to size
    • Space age polymer material
    • Reflects up to 850°F! Reflecting 80% of heat!
    • Ultra light weight and self adhesive
  • Hidden Tail Gate Latch w/ 21 Inch Straps
    Hidden Tail Gate Latch w/ 21 Inch Straps
    (Part #91000021)
    x
                

    The last thing you want on your tricked-out classic truck are beat-up old tailgate latches and rusty tailgate chains. This clean latch setup uses small stainless steel brackets that attach to the tailgate, stainless catch assemblies with spring-loaded nylon buttons that install in the bed sides, and woven nylon check straps to hold your tailgate open without damaging that expensive paint job. It's an easy-to-install system that works as nice as it looks and wont rust or rattle.

    910-00021 Instructions (PDF)

  • Omega Kustom 20235 8000 RPM Tach, 5 Inch, Tan Face
    Omega Kustom 20235 8000 RPM Tach, 5 Inch, Tan Face
    (Part #91120235)
    x
                

    Omega Kustom tachometers are made in the U.S.A. with a 3 year warranty. Features a stainless steel bezel, anti-scratch glass lens, precision movements, plastic case, and adjustable brackets.

    Omega Kustom Tach Gauge Installation Instructions (PDF)

    Gauge Mounting Information (PDF)

  • HushMat 20200 Silencer Megabond 1/4 In. Sound & Thermal Insulation Kit
    HushMat 20200 Silencer Megabond 1/4 In. Sound & Thermal Insulation Kit
    (Part #91080522)
    x
                

    A HushMat Silencer Megabond ¼” Sound and Thermal Insulating Kit is universal and designed to treat two full size doors or one full sized headliner. HushMat Silencer Megabond reduces airborne noise and radiant heat through absorption.

    • Silencer Megabond is formulated to withstand the automotive environment
    • Withstands temperatures from -30 degrees up to +280 degrees Fahrenheit
    • Absorbs airborne noise from 600 – 4000 Hz frequency
    • Easy to mold around uneven surfaces
    • Self Adhesive peel and stick – no secondary glue and NO spray
    • Trims with razor knife or household scissors
    HushMat Door Kit contains two (2) 23” x 36” sheets or 11.5 Square Feet of OEM Approved foam insulating material.

    Use HushMat Silencer Megabond 1/4" foam on the back side of the door trim panel and HushMat Ultra Door Kit (Speedway Part #

  • Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember
    Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember
    (Part #91044754)
    x
                

    Our bolt-in Mustang II suspension kit for 1947-1954 Chevy half-ton and 3/4 ton pickups includes all hardware and instructions. 

    • Completely bolt in - no welding required
    • Based on proven Mustang II geometry
    • Complete with bolt in boxing plates to reinforce the frame
    • Interlocking design for ultimate strength
    • Threaded adjusters to fine tune ride height
    • Full lower A-arms required with this crossmember (strutless type)
    • Requires the use of a power rack and pinion and tubular control arms
    • NOT for use with air ride

    910-44754 Instructions (PDF)

    Note:  Use bolt-in motor mount kit 910-54754 to mount your S/B Chevy.
  • Auto Meter 1337 Arctic White Air-Core Water Temperature Gauge
    Auto Meter 1337 Arctic White Air-Core Water Temperature Gauge
    (Part #1821337)
    x
                

    Auto Meter Arctic White Series gauges feature a vintage-style domed lens and a black bezel. Gauge illuminates via an incandescent bulb and "around the dial" lighting. Red and green bulb covers are included with temperature meter for a custom look.

    • Includes 1/8" NPT Sender
    • Includes 3/8"" NPT adapter/fitting
    • Includes 1/2"" NPT adapter/fitting

    Electrical Water Temperature Guage Installation Instructions (PDF)

  • Stewart Warner 82311 Deluxe Ammeter Gauge, 2-1/16 Inch, 60-0-60 Amps
    Stewart Warner 82311 Deluxe Ammeter Gauge, 2-1/16 Inch, 60-0-60 Amps
    (Part #66582311)
    x
                Stewart Warner Deluxe 2-1⁄16" diameter ammeter gauges feature a black face, white letters and chrome bezel. A 12 volt light is included.
            
  • 1932 Ford Hood Latch, Black
    $3.99
    Product Rating: 4.50 Stars
    1932 Ford Hood Latch, Black
    (Part #91132501)
    x
                

    This is a reproduction rams horn handle for 1932 Fords. The latch comes with the hood side catch and all necessary hardware as well.

    • Overall Height: 4"
    • Spring loaded
    • Reproduction for 1932 Fords 
    • Includes hood side catch and hardware
  • Omega Kustom 22085 Tan Face 5-Gauge Set, Electric Speedometer, 4-3/8
    Omega Kustom 22085 Tan Face 5-Gauge Set, Electric Speedometer, 4-3/8
    (Part #91122085)
    x
                

    Omega Kustom Instruments produces the most advanced speedometers and auxilary gauges available anywhere. All of Omega Kustom’s instruments have the finest movements available today and the latest lighting technology. Each gauge in the kit is surrounded by polished stainless steel bezels and real glass lenses.

    Each Timeless Tan Series set includes:

    • 4-3/8" Speedometer (electric w/ GM style sender)
    • 2-1/16" Fuel Level (w/ sender)
    • 2-1/16" Water Temp (electric w/ sender)
    • 2-1/16" Oil Pressure (electric w/ sender)
    • 2-1/16" Voltmeter

    Omega Gauge Installation Instructions (PDF)

    Gauge Mounting Information (PDF)

  • 1964-66 Chevy Pickup Switch Panel Cover
    1964-66 Chevy Pickup Switch Panel Cover
    (Part #91023664)
    x
                

    These billet aluminum switch panel covers are made to fit your 1964-1966 Chevy pickup truck dash.  They are designed to fit in place of your switches for a new styled sleek look.

    • Billet aluminum
    • 1964-1966 Chevy Pickup
    • Switch eliminator panel
  • Speedway Electric Speedometer, 3-3/8 Inch Diameter
    Speedway Electric Speedometer, 3-3/8 Inch Diameter
    (Part #91065051)
    x
                These electric speedometers are perfect for your rod or race project. They feature a white face with bold black lettering and a bright orange needle for quick monitoring.  Our 0-160 mph speedometers also come with a stainless steel bezel and a complete installation kit. This speedometer will work with either a 16 or an 8 ppm sender.  There are two calibration modes, the first of which asks you to drive a measured mile and the speedometer will detect the frequency of the sender. The other mode allows you to enter the pulses per mile of your sender.
    • 3-3/8” body diameter
    • 3-3/4 ” bezel
    • Overall Diameter: 3-3/4"
    • Body Length: 1.60"
    • Stud Length: 1.00"
    • Backlit white face with black lettering
    • Orange needle
    • Electric
    • 0-160 mph range
    • Stainless steel bezel
    • Includes installation kit
    • Compatible with almost any sender EXCEPT the Sky Driver GPS signal generator by Classic Instruments
    • SENDER NOT Included
    • Replacement light socket assembly available # 910-65075

    Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 50