Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Shift into high gear with classic truck automatic transmission parts from Speedway Motors!  Featuring tranny parts from the top brands like Lokar, flexplates, nostalgia shifters, and torque convertors, Speedway Motors is your classic pickup truck transmission mega-store.  Let Speedway help you get into Drive with a huge selection of classic truck parts perfect for your ride and at prices that can't be beat.

Featured Products
B&M 113001 GM TH350 Transmission and 2400 Stall Converter Kit
B&M 113001 GM TH350 Transmission and 2400 Stall Converter Kit
x
            

These B&M Street/Strip Turbo 350 automatic transmission and converter combinations are designed to be used in street rods and muscle cars. The included Tork Master 2400 converter has a higher stall speed (2300-2500 RPM) which allows you to run a little more cam without having the car pulling on the brakes all the time. This TH350 transmission is ideal for use behind small block Chevy engines with 230 ft. lbs. of torque at 2500 RPM. It has a 2:52 first, 1:52 second and 1:1 high gears. Uses the short 6" tail shaft and has an adjustable modulator and B&M internals. Ships by truck.

B&M TH350 features: 

  • 2:52 1st gear, 1:52 2nd gear
  • Extra wide direct drum bushing
  • Machined forward & direct pistons
  • New kickdown band with welded anchors
  • New intermediate & low roller clutches
  • All new B&M high performance friction plates, thrust bearings & races
  • New adjustable modulator, detent control link with new breather & filter
  • Recalibrated valve body Hardened intermediate outer race
  • Dual piston apply feature on 2-3 shift to increase torque capacity

Tork Master 2400 Converter features:

  • New alloy steel pump drive tube
  • Needle thrust bearings when factory equipped
  • New thrust washer between turbine and cover
  • Pressure tested and fully balanced 
Lokar ATS6350AM TH350 Hi-Tech Shifter, 23 Inch
Lokar ATS6350AM TH350 Hi-Tech Shifter, 23 Inch
x
            

Designed for Chevy Turbo 350 automatic transmissions. This unique shifter features reverse and neutral safety lockout button and safety switch. 12 point installation positioning, shifter rotation for precise comfort. Brushed hi-tech aluminum knob.

  • For TH350 transmission application
  • Neutral Safety Switch
  • Positive Lock-Out in Park and Neutral
  • 360-degree lever rotation for extra leg room
  • Out-from-under-the-dash and away-from-the-seat lever adjustments
  • Brushed aluminum shifter knob
  • Easy-to-remove shifter knobs for simple boot installation
  • Teflon lined button in shifter knobs for smooth operation
  • Chrome-plated lever
  • Gold iridited bracketry
  • All hardware included for installation
Lokar ATS6350CM TH350 Hi-Tech Shifter, 12 Inch
Lokar ATS6350CM TH350 Hi-Tech Shifter, 12 Inch
x
            

Designed for Chevy Turbo 350 automatic transmissions. This unique shifter features reverse and neutral safety lockout button and safety switch. 12 point installation positioning, shifter rotation for precise comfort. Brushed hi-tech aluminum knob.

  • For TH350 transmission application
  • Neutral Safety Switch
  • Positive Lock-Out in Park and Neutral
  • 360-degree lever rotation for extra leg room
  • Out-from-under-the-dash and away-from-the-seat lever adjustments
  • Brushed aluminum shifter knob
  • Easy-to-remove shifter knobs for simple boot installation
  • Teflon lined button in shifter knobs for smooth operation
  • Chrome-plated lever
  • Gold iridited bracketry
  • All hardware included for installation
1968-81 GM TH350-TH400 Performance Torque Converter-2700-3000 Stall
1968-81 GM TH350-TH400 Performance Torque Converter-2700-3000 Stall
x
            

Races are won or lost at the starting line, so make sure you come out ahead with a High Performance Turbo 350-Turbo 400 Torque Converter. Whether you are looking for a street, strip, racing, or just plain heavy duty converter, these units will deliver lasting performance in your GM TH350 or TH400. With features like welded internals, oversized bearings, and hardened hubs, you can rest assured that these torque converters are of the highest quality possible. Made in the U.S.A.

  • For Turbo 350 and Turbo 400 transmission application
  • 2700-3000 stall - 10" diameter 
  • 1968-'81 GM - 10-3/4" bolt circle

All stall ranges will vary depending on the engine setup, vehicle weight, and gear ratios.

Note: These converters will work with TH400 transmissions only if a dual bolt pattern flywheel is used.

Instructions (PDF)

To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter. 

"Classic Truck, Automatic Transmission" Page 1 of 6

  • Lokar S-68148 12 Inch Replacement Shifter Lever
    Lokar S-68148 12 Inch Replacement Shifter Lever
    x
                These Lokar Replacement ATS shifter sticks are  direct replacements for your Lokar ATS automatic shifters. They are  manufactured from steel and are chrome plated for show-quality looks.  Available in different lengths, Lokar replacement ATS shifter sticks are  the perfect choice for your Lokar shifter.
    • 12 in. long
    • Replacement shifter stick only
    • Sold individually
  • Lokar KD-2350U TH350 Kickdown Kit
    Lokar KD-2350U TH350 Kickdown Kit
    x
                

    These Turbo 350 transmission kickdown kits have a stainless bracket that mounts on rear manifold bolts. Designed for 4 barrel carburetors on S/B Chevy engines. Kit includes extender for more versatility in adjusting cable length where needed. For TH350 transmission application.

    Note: Cable housing cannot be cut to fit.

  • 1953-64 Ford Pickup Automatic Transmission Mount
    1953-64 Ford Pickup Automatic Transmission Mount
    x
                This crossmember is ideal for mounting Ford or GM transmissions into 1953-1964 Ford pick-ups. Mounts in channel of frame or under frame to support the tailshaft of the transmission.

    With this mount sitting on table, from the table to the surface that mounts on the frame is 2-3/4". The whole piece is 33-1/2" long.

    Note: Works with rubber transmission cushions.

  • Replacement Pilot Bushing, Chevy Engine to Ford Trans
    Replacement Pilot Bushing, Chevy Engine to Ford Trans
    x
                

    Replacement pilot bushing for use with adapter 720-0392 for Chevy V8/V6 engines to Ford (1932-1948), Mercury (1939-1950), and Ford pick-up truck (1932-1952) transmissions.

    • Adapts Ford transmission to Chevy crankshaft
    • 1.093" O.D.
    • .671" I.D.
    • 1.45" long
  • Lokar ATS6350AN GM TH350 Nostalgia Shifter w/ Free boot
    Lokar ATS6350AN GM TH350 Nostalgia Shifter w/ Free boot
    x
                

    Lokar's Nostalgia Turbo 350 Shifter is designed with 2 bends in the lever and a black mushroom knob for a nostalgic hot rod look. It has 23" lever, Teflon-lined Safety-Lock-Out button, main plate, and side brackets.

    For GM Turbo Hydramatic 350 or TH350 automatic transmissions.

    TH350 Shifter Installation Instructions 

    Free boot with purchase of Nostalgia Shifter!

  • GM TH350/TH400 Oil Pan Bolt Kit
    GM TH350/TH400 Oil Pan Bolt Kit
    x
                Chrome bolt set for TH-350 and TH-400 automatic transmission oil pans. 
            
  • Lokar SK-6862 Skull 3-Speed Automatic Shift Knob
    Lokar SK-6862 Skull 3-Speed Automatic Shift Knob
    x
                

    The finishing touch for your hot rod! Polished, high luster aluminum Skull auto shift knob is designed with a safety lock-out button and functions with the same smooth operation as Lokar's original factory installed knobs (only works with Lokar shifters). The Teflon lining guarantees smooth operation. Knob button engraved with specific transmission shift pattern.

    All shift patterns meet NSRA safety requirements. Knobs operate with Lokar 3-speed automatic shifters ONLY.

  • Ididit 2802000010 2-1/4 Inch Column Mount Cable Shift Kit
    Ididit 2802000010 2-1/4 Inch Column Mount Cable Shift Kit
    x
                This is the slickest way to connect your column shifter to your tranny. If you are using the Ididit shorty column, this is a must. Includes column bracket to mount cable to Ididit columns, 6 foot cable and GM tranny brackets.
            
  • Ford 289-351W C4-AOD Transmission Block Plate
    Ford 289-351W C4-AOD Transmission Block Plate
    x
                We use this plate with our Flathead Ford to C-4 transmission adaptor kit to provide additonal torque convertor clearance (insufficient convertor clearance will ruin the transmission front pump).
            
  • ARP Fasteners 200-2902 Chevy Flexplate Bolts
    ARP Fasteners 200-2902 Chevy Flexplate Bolts
    x
                

    Flexplate bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP develop special bolts that are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining.

    Fits Chevrolet 90° V6 & 265-454 Chevy V8 with 2-Pc rear seal. Set of 6 bolts.

    • Exclusive, flat, 12-point head design
    • Larger than stock shank diameter for increased strength and improved flexplate register
    • Originally developed for NASCAR Winston Cup competition
    • 200,000 psi rating
  • 1955-1985 Chevy Flexplate for 2-Piece Rear Main, 153 Tooth
    1955-1985 Chevy Flexplate for 2-Piece Rear Main, 153 Tooth
    x
                

    These non-SFI rated S/B Chevy automatic transmission flexplates are suggested whenever installing a new engine or transmission. These flexplates are for two-piece rear main seal engines ONLY.

    • (Internal balance, 153-tooth)
      • Dual bolt patterns, 9-3/4" and 10-3/4"
      • Flexplate O.D. 12-3/4"
      • Center Hole 2-1/2"

    Make sure you choose the correct flywheel for your application by reading our tech article. Small Block Chevy - How to Choose a Flexplate.

  • 1968-81 Performance GM TH350-TH400 Torque Converter-2200-2600 Stall
    1968-81 Performance GM TH350-TH400 Torque Converter-2200-2600 Stall
    x
                

    Races are won or lost at the starting line, so make sure you come out ahead with a High Performance Torque Converter. Whether you are looking for a street, strip, racing, or just plain heavy duty converter, these units will deliver lasting performance in your GM TH350 or TH400. With features like welded internals, oversized bearings, and hardened hubs, you can rest assured that these torque converters are of the highest quality possible. Made in the U.S.A.

    • For Turbo 350 or Turbo 400 transmission applications
    • 2200-2600 stall - 12" diameter 
    • 1968-'81 GM - 10-3/4" bolt circle

    All stall ranges will vary depending on the engine setup, vehicle weight, and gear ratios.

    Note: These converters will work with TH400 transmissions only if a dual bolt pattern flywheel is used.

    Instructions (PDF)

    To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter.

  • Flathead 10 Inch Clutch Disc, 1 Inch 14-Spline, S-10, T-5 Transmission
    Flathead 10 Inch Clutch Disc, 1 Inch 14-Spline, S-10, T-5 Transmission
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 10" clutch discs for the flathead V8. They replace 10" OEM with a 11-5/8" bolt circle.

    These premium organic clutch friction discs are for use with flathead Ford V8 to S-10 T-5  transmission conversions.

    Flathead 10 Inch Clutch Disc

    • 1 Inch 14-Spline 
    • Early Ford Flatheads
    • S-10 T-5  transmission conversions

    T-5 and Adapter Tech Tips (Link)

    Warning: Not for use with 11" Ford Truck pressure plate.  Clearence of adapter may be required with pressure plates larger than 9".  Speedway pressure plate 91015635 is without weights and provides extra clearance.  T-5 transmissions may require drilling mount ears to 1/2".  

     

  • Small Block Chevy Flexplate Spacers
    From: $18.99
    Product Rating: 5.00 Stars
    Small Block Chevy Flexplate Spacers
    x
                

    If you don't have at least .125" between the end of the starter drive and the flexplate, you're asking for trouble. These spacers allow you the clearance needed to make your lightweight flex plate live. Includes a .030", .035", .045", .055" and .070" spacers. S/B Chevy. 

    -74:  For use with '55-'85 two-piece S/B Chevy crank
    -86:  For use with '86-Up one-piece S/B Chevy crank

  • Lokar TD-3350400FM TH350-TH400 Firewall Mount Transmission Dipstick
    Lokar TD-3350400FM TH350-TH400 Firewall Mount Transmission Dipstick
    x
                

    This Turbo 350 or Turbo 400 transmission dipstick features braided stainless covered tubing with billet look handle and stainless hardware. Flexible design gives added mounting versatility for your TH350 or TH400 transmission.

     

  • Derale 14002 TH400 Extended Filter Pickup Tube for Deep Trans Pan
    Derale 14002 TH400 Extended Filter Pickup Tube for Deep Trans Pan
    x
                

    For use with GM TH400 "deep" pans, this filter pickup tube allows proper pickup depth for applications where a deep pan is replacing a stock depth GM Turbo 400 transmission pan.

    • Extends filter for use on "deep" trans pans
    • Required when changing from standard Turbo 400 pan to deep Turbo 400 pan
  • Flathead V8 to Ford C4 Auto Transmission Conversion Kit
    Flathead V8 to Ford C4 Auto Transmission Conversion Kit
    x
                Please view the product's page for more information
            
  • Lokar ATS6350BM TH350 Hi-Tech Shifter, 16 Inch
    Lokar ATS6350BM TH350 Hi-Tech Shifter, 16 Inch
    x
                

    Designed for Chevy Turbo 350 automatic transmissions. This unique shifter features reverse and neutral safety lockout button and safety switch. 12 point installation positioning, shifter rotation for precise comfort. Brushed hi-tech aluminum knob.

    • For TH350 transmission application
    • Neutral Safety Switch
    • Positive Lock-Out in Park and Neutral
    • 360-degree lever rotation for extra leg room
    • Out-from-under-the-dash and away-from-the-seat lever adjustments
    • Brushed aluminum shifter knob
    • Easy-to-remove shifter knobs for simple boot installation
    • Teflon lined button in shifter knobs for smooth operation
    • Chrome-plated lever
    • Gold iridited bracketry
    • All hardware included for installation
  • TH350 Finned Aluminum Transmission Pan
    TH350 Finned Aluminum Transmission Pan
    x
                

    This polished, cast aluminum Turbo 350 oil pan replaces your original TH350 automatic transmission pan. Aluminum fins provide more cooling than stock-type steel pans.

    Includes drain plug, bolts and gasket.

  • Shift Indicator Pointer
    $4.99
    Product Rating: 5.00 Stars
    Shift Indicator Pointer
    x
                This is a glue on pointer for use with our shift indicator housings and lenses.
            
  • Garage Sale - Mr. Gasket Large Shifter Boot With Chrome Trim Ring
    Garage Sale
    Garage Sale - Mr. Gasket Large Shifter Boot With Chrome Trim Ring
    x
                

    Shifter Boots are designed to accommodate the additional length, width and height of floor modifications in competition shifter installations.

     

    Measures 7-3/4" x 8-3/4" 

    Includes Boot, Trim Ring and Screws

     

    These shifter boots are garage sale priced because they are new old stock.  

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS      

  • Lokar KD-2700HT 700R4 Hi-Tech Kickdown Kit
    Lokar KD-2700HT 700R4 Hi-Tech Kickdown Kit
    x
                

    These Hi-Tech 700-R4 transmission kickdown kits have a braided stainless, Teflon lined cable, which will adapt to virtually any 700R4 carburetor manifold (including tinnel ram, blower manifolds, and Weber induction systems). 36" long, you-cut-to-fit cable attaches to the stainless bracket # 491-4350 or # 491-SRK4000.

    491-2700HT Instructions (PDF)

  • Lokar ATS6700AN Nostalgia GM 700R4 Shifter w/ Free Boot
    Lokar ATS6700AN Nostalgia GM 700R4 Shifter w/ Free Boot
    x
                

    Lokar's Nostalgia 700R4 Shifter is designed with 2 bends in the lever and a black mushroom knob for a nostalgic hot rod look. It has 23" lever, Teflon-lined Safety-Lock-Out button, main plate, and side brackets.

    Tech note:  Shifter lever lengths start 3-1/2" above the top of the transmission.

    For GM 700R-4 automatic overdrive transmissions.

    Free boot with purchase of Nostalgia Shifter!

  • TH350 Transmission Chrome Dipstick-27 Inch
    TH350 Transmission Chrome Dipstick-27 Inch
    x
                For GM TH350 with chrome tube. Some bracket modification may be required. This Turbo 350 transmission dipstick will fit great.
            
  • Lokar ATS60C4AN Nostalgia Ford C4 and C5 Shifter w/ Free Boot
    Lokar ATS60C4AN Nostalgia Ford C4 and C5 Shifter w/ Free Boot
    x
                

    Lokar's Nostalgia Ford C4 and C5 Shifter is designed with 2 bends in the lever and a black mushroom knob for a nostalgic hot rod look. It has 23" lever, Teflon-lined Safety-Lock-Out button, main plate, and side brackets.

    For Ford C4 and C5 SelectShift Cruise-O-Matic automatic transmissions.

    Free boot with purchase of Nostalgia Shifter!

  • TH350 Transmission Pan-Chrome Steel
    TH350 Transmission Pan-Chrome Steel
    x
                

    Stock capacity stamped steel oil pan for GM Turbo 350 automatic transmission. Chrome plated. Features cooling fins for additional cooling capacity. For TH350 transmission applications.

    Includes drain plug.

  • 1955-1985 Chevy Flexplate for 2-Piece Rear Main, 168 Tooth
    1955-1985 Chevy Flexplate for 2-Piece Rear Main, 168 Tooth
    x
                

    These non-SFI rated S/B Chevy automatic transmission flexplates are suggested whenever installing a new engine or transmission. These flexplates are for two-piece rear main seal engines ONLY.

    •  (Internal balance, 168-tooth)
      • Dual bolt patterns, 10-3/4" and 11-1/2"
      • Flexplate O.D. 14.09"
      • Center Hole 2-1/2"

    Make sure you choose the correct flywheel for your application by reading our tech article. Small Block Chevy - How to Choose a Flexplate.

  • Lokar ATS6400AN Nostalgia GM TH400 Shifter w/ Free Boot
    Lokar ATS6400AN Nostalgia GM TH400 Shifter w/ Free Boot
    x
                

    Lokar's Nostalgia Shifter is designed with 2 bends in the lever and a black mushroom knob for a nostalgic hot rod look. It has 23" lever, Teflon-lined Safety-Lock-Out button, main plate, and side brackets.

    For GM Turbo Hydramatic 400 automatic transmissions.

    Free boot with purchase of Nostalgia Shifter!

  • TH400 Transmission Chrome Dipstick
    TH400 Transmission Chrome Dipstick
    x
                Turbo 400 transmission chrome dipstick with O-ring seal for GM TH400 auto transmissions. Some bracket modification may be required. 22" length.
            
  • Lokar ATS6A0DAN Nostalgia Ford AOD Shifter w/ Free Boot
    Lokar ATS6A0DAN Nostalgia Ford AOD Shifter w/ Free Boot
    x
                

    Lokar's Nostalgia Shifter is designed with 2 bends in the lever and a black mushroom knob for a nostalgic hot rod look. It has 23" lever, Teflon-lined Safety-Lock-Out button, main plate, and side brackets.

    For Ford AOD automatic overdrive transmissions.

    Free boot with purchase of Nostalgia Shifter!

  • Lokar TD-3700FM36 Stainless Steel 700R4 Firewall Mount Trans Dipstick
    Lokar TD-3700FM36 Stainless Steel 700R4 Firewall Mount Trans Dipstick
    x
                

    Braided stainless covered tubing with billet look handle and stainless hardware. Flexible design gives added mounting versatility.

     

    You have flexibility with our Teflon-lined Flexible Braided Stainless 700R4 Transmission Dipstick. This R4 Kit comes complete with braided stainless outer housing and heat resistant E-Z to read flexible inner dipstick measuring cable. Inner cable is molded with appropriate trans fluid levels. Billet aluminum handle and billet aluminum fittings complement Lokar's Flexible Engine Dipsticks. Kit includes dipstick funnel adapter to assist in filling. Designed for "push in" style transmissions. Dipstick seals with double O-rings.  Firewall mount measures 24" in length. 

    This 700R4 dipstick kit comes complete with installation instructions.

     

  • Lokar KD-2350HT Hi-Tech TH350 Kickdown Kit
    Lokar KD-2350HT Hi-Tech TH350 Kickdown Kit
    x
                

    These Hi-Tech Turbo 350 transmission kickdown kits feature a braided stainless, Teflon lined cable that adapts to any manifold installation (including tunnel ram, blower manifolds and Weber induction systems). 36" long, you-cut-to-fit cable attaches to stainless brackets # 491-4000 or # 491-SRK4000.

    491-2350HT Instructions (PDF)

     

  • Lokar ATS6400BM GM TH400 Hi-Tech Shifter, 16 Inch
    Lokar ATS6400BM GM TH400 Hi-Tech Shifter, 16 Inch
    x
                

    Designed for Chevy Turbo 400 automatic transmissions. This unique shifter features reverse and neutral safety lockout button and safety switch. 12 point installation positioning, shifter rotation for precise comfort. Brushed hi-tech aluminum knob.

    • For TH400 transmission application
    • Neutral Safety Switch
    • Positive Lock-Out in Park and Neutral
    • 360-degree lever rotation for extra leg room
    • Out-from-under-the-dash and away-from-the-seat lever adjustments
    • Brushed aluminum shifter knob
    • Easy-to-remove shifter knobs for simple boot installation
    • Teflon lined button in shifter knobs for smooth operation
    • Chrome-plated lever
    • Gold iridited bracketry
    • All hardware included for installation
  • 1986-1994 Chevy 153 Tooth Flexplate 1 PC Rear Main, Ext. Balance
    1986-1994 Chevy 153 Tooth Flexplate 1 PC Rear Main, Ext. Balance
    x
                

    These non-SFI rated Small Block Chevy flexplates are suggested whenever installing a new engine or transmission. This 153-tooth flexplate fits 1985-89 externally balanced S/B Chevys (such as 4.3/305/350) with a 1-piece rear main seal. Single bolt pattern.\

    • 12-13/16" O.D.
    • 3 on 10-3/4" bolt pattern for the torque converter

    Make sure you choose the correct flywheel for your application by reading our tech article. Small Block Chevy - How to Choose a Flexplate.

     

  • Lokar ATS6350AM TH350 Hi-Tech Shifter, 23 Inch
    Lokar ATS6350AM TH350 Hi-Tech Shifter, 23 Inch
    x
                

    Designed for Chevy Turbo 350 automatic transmissions. This unique shifter features reverse and neutral safety lockout button and safety switch. 12 point installation positioning, shifter rotation for precise comfort. Brushed hi-tech aluminum knob.

    • For TH350 transmission application
    • Neutral Safety Switch
    • Positive Lock-Out in Park and Neutral
    • 360-degree lever rotation for extra leg room
    • Out-from-under-the-dash and away-from-the-seat lever adjustments
    • Brushed aluminum shifter knob
    • Easy-to-remove shifter knobs for simple boot installation
    • Teflon lined button in shifter knobs for smooth operation
    • Chrome-plated lever
    • Gold iridited bracketry
    • All hardware included for installation
  • 1968-81 GM TH350-TH400 Performance Torque Converter, 2000-2200 Stall
    1968-81 GM TH350-TH400 Performance Torque Converter, 2000-2200 Stall
    x
                

    Races are won or lost at the starting line, so make sure you come out ahead with a High Performance Turbo 350 or Turbo 400 Torque Converter. Whether you are looking for a street, strip, racing, or just plain heavy duty converter, these units will deliver lasting performance in your GM TH350 or TH400. With features like welded internals, oversized bearings, and hardened hubs, you can rest assured that these torque converters are of the highest quality possible. Made in the U.S.A.

    • 2000-2200 stall - 12" diameter 
    • 1968-'81 GM Turbo 350 or Turbo 400 - 10-3/4" bolt circle

    All stall ranges will vary depending on the engine setup, vehicle weight, and gear ratios.

    Note: These converters will work with TH400 transmissions only if a dual bolt pattern flywheel is used.

    Instructions (PDF)

    To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter. 

  • Lokar KD-2AODHT Ford/AOD Stainless Steel Kickdown Cable
    Lokar KD-2AODHT Ford/AOD Stainless Steel Kickdown Cable
    x
                

    Lokar's "U-Cut-to-Fit" Hi-Tech Kickdown Cable features a stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdown cable is adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount the kickdown with a Stainless Steel Carburetor Bracket and Return Springs (sold separately).

    Complete instructions included in kit.

  • Lokar 700R4 Hi-Tech Shifters
    From: $234.99
    Product Rating: 5.00 Stars
    Lokar 700R4 Hi-Tech Shifters
    x
                

    Designed for Chevy 700R4 transmission. This unique shifter features reverse and neutral safety lockout button and safety switch. 12 point installation positioning, shifter rotation for precise comfort. Brushed hi-tech aluminum knob.

    • For 700R-4 transmission application
    • Neutral Safety Switch
    • Positive Lock-Out in Park and Neutral
    • 360-degree lever rotation for extra leg room
    • Out-from-under-the-dash and away-from-the-seat lever adjustments
    • Brushed aluminum shifter knob
    • Easy-to-remove shifter knobs for simple boot installation
    • Teflon lined button in shifter knobs for smooth operation
    • Chrome-plated lever
    • Gold iridited bracketry
    • All hardware included for installation

    Tech note:  Shifter lever lengths start 3-1/2" above the top of the transmission.

  • Lokar ATS6350R2 TH350 Radical Double Bend Shifter
    Lokar ATS6350R2 TH350 Radical Double Bend Shifter
    x
                

    If you want the Rat Fink look, these Lokar Turbo 350 Radical 32" double bend handle shifters are for you! You get a 32 inch tall shifter with the same Lokar functionality, quality, and safety features you've come to expect: classic Black Mushroom knob with exclusive Teflon-lined Safety-Lock-Out Button, coated steel main plate and side brackets. For TH350 transmission application.

    For GM Turbo Hydramatic 350 automatic transmission.

    TH350 Shifter Installation Instructions 

    Tech Note:  Shifter lever lengths start 3-1/2" above the top of the transmission.

  • Lokar S-68151 6 Inch Replacement Shifter Lever
    Lokar S-68151 6 Inch Replacement Shifter Lever
    x
                These Lokar Replacement ATS shifter sticks are  direct replacements for your Lokar ATS automatic shifters. They are  manufactured from steel and are chrome plated for show-quality looks.  Available in different lengths, Lokar replacement ATS shifter sticks are  the perfect choice for your Lokar shifter.
    • 6 in. long
    • Replacement shifter stick only
    • Sold individually
Goto Previous PagePrevious Page
1 2 3 4 5 6