Air and Fuel Delivery
Speedway Motors stocks all the best names in classic truck carburetors and intake manifolds! Plus, we have a great selection of fuel cells and gas pedals, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N and R2C. Speedway can fuel your need for speed!
$1.99More InfoThree-Bolt Carb Base Gasket(Part #91011050)x
Three bolt carburetor base gaskets fit Stromberg 97-style carbs and Holley 94-style carbs.
From: $4.99More InfoSure Seal O-Ring Air Cleaner Spacer(Part #91011063)x
This unique sealing ring spacer has O-ring on the carburetor side to prevent dust from entering past the filter base. Also allows you to raise the filter up for additional clearance.
Available in three heights: 1/2", 1" or 2".
$36.99More InfoMSD 2890 MSD Air Cleaner kit, MSD Logo 14 Inch, 3 Inch Element(Part #5472890)x
MSD Logo Air Cleaner. 14" Air cleaner lid fits Atomic EFI TB. Uses 3" filter.
- Fits Atomic EFI Throttle Body
From: $10.99More InfoAluminum Fuel Line, 3/8 Inch O.D.(Part #91011430)x
Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money.
- Use with tube nut couplers, sleeves and 37° flared AN fittings
- Rated to 250 psi
- Not recommended for high pressure (brake) applications
- Available in 10 ft., 20 ft., or 30 ft. coils
Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.
$9.99More InfoFuel Filter Mounting Bracket(Part #910117)x
These fuel filter mounting brackets are CNC machined aluminum. Available in 1-3/8", 1-1/2", or 1-3/4" round tubing.
These brackets are designed to be used with our filters. Hole is 2" inner diameter.
$7.99$10.00More InfoSpeedway Fuel Cell Foam, 14 x 4 x 6 Inch(Part #6007050)x
Compatible with gasoline, E85, or alky fuels (not recommended for use with nitro-methane). This fuel cell safety foam keeps weight transfer/shift to a minimum, which provides you with more responsive and predictable handling. Can be cut and stacked as needed.
Blocks are sold EACH.
$24.99More InfoAfco 4# Fuel Pressure Sending Unit (1/8 Inch Pipe)(Part #10685284)x
Afco 4# Fuel Pressure Sending Unit
- 1/8 Inch Pipe
$1,099.99More InfoNewMSD 2700 Airforce Intake Manifold, LT1, 2014-Up Corvette(Part #5472700)x
When you’re serious about power for your new LT1 engine, call in the AirForce! The all new Atomic AirForce intake manifold from MSD delivers improved airflow and distribution to improve the performance of stock and modified engines.
- 2014-2015 Chevrolet Corvette Application
- For LT1 engines
- Maximized Airflow
- Minimized Shrouding
- Sold Individually
Intake Info (PDF)
"Classic Truck, Air and Fuel Delivery" Page 1 of 50
Page 1 of 50
$13.99More InfoAFCO 10171 Bushing Kit w/ RH Threaded Female Rod End(Part #10610171)x
AFCO Throttle Rod Components
$231.99More InfoWeiand 7530 Team G Chevy Small Block Manifold(Part #8057530)x
The Weiand Team G is a 360° single-plane, open plenum manifold developed for competition S/B Chevy V8s. Features an isolated plenum and isolated water cross-over to keep the incoming air/fuel charge cooler for improved power. Effective power range is 2800-7200 RPM.
Square carburetor mounting flange.
MPD Racing 94-73800 BLACK Fuel Shut Off Valve for Fuel Filter, -12 AN(Part #546738)x
Replacement fuel shut off valve for Speedway aluminum fuel filters. Has a -12 AN outlet with O-ring. Teflon sealed ball valve inside.
$109.99More InfoJAZ Fuel Cell Fuel Level Sending Unit, 0-90 Ohm, 8 Inch(Part #458890)x
These bolt-in fuel level sending units from JAZ Products feature a positive seal and a 2.3" O.D. bung. For GM gauges with 0-90 ohm range.
Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.
$779.99$799.95More InfoAeromotive 18664 Stealth Fuel Cell, 15 Gallon(Part #91018664)x
Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.
- Includes Stealth 340 LPH in-tank fuel pump
- Works with both carbureted and EFI systems
- Return line provisions
- Two AN8 vents with rollover valves
- Universal 0-90 Ohm fuel level sender
- Standard 12-bolt flush mount lid assembly
- Natural aluminum finish
- Ready to go simple installation
Fuel Pump Flow Chart (GIF)
$389.99More InfoEdelbrock 1413 Performer 4 Barrel Carburetor, 800 CFM, Electric Choke(Part #3251413)x
Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.
Designed and calibrated for maximum street performance with most Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately.
- Electric choke
- Smooth throttle response throughout the power band
- Uses metering rods to transition between circuits - rods can be changed in seconds without carburetor removal or draining fuel
- Float levels are factory set; adjustments are rarely needed
- Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
- Lightweight all-aluminum body is compatible with gasohol and blended fuels
- Includes both timed and full vacuum ports for ignition advance
$179.99More InfoAeromotive 11140 340 Stealth Fuel Pump, Centered Inlet(Part #91011140)x
The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. It is a compact, lightweight pump that bolts into many existing hanger assemblies.
What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. Compared to other popular aftermarket pumps, at 40 psi the 340 boasts more than 340 lph. That’s over 30% more flow, making it ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the OE configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications.
- Fits most vehicles where popular aftermarket pumps are applicable
- Designed for in-tank use only
- Can be used in carbureted or EFI applications
- Turbine pump mechanism increases durability and can be used in pulse modulated applications
910-11140 Instructions (PDF)
$17.99$21.95More InfoLokar XSRK-4001 Black Stainless Steel Carburetor Bracket(Part #49104001)x
Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads. Design provides improved clearance on Edelbrock carbs. Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.
- Mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads
- Stainless steel
- Improved clearance on Edelbrock carbs
- Includes tension screw to prevent bracket movement under extreme pressure
$249.99More InfoKinsler Fuel Injection 5800 Spun Aluminum Tank, 2 Gallon(Part #473500)x
Beautiful, brush-finished .080" wall spun aluminum tank with a knurled, billet aluminum, non-vented screw-on cap. Two female 3/8" NPT fittings on top, one female 3/4" NPT fitting on the bottom.
Mounting brackets sold separately.
$103.99More InfoWaterman 935566D Dash Mount Fuel Shut Off Valve, -6 AN(Part #9109355661)x
Dash mount is AN6 male with offset style handle. Fuel cell ball valve mounts in plate. Required for many Sprint cars. They are designed to be plumbed inline and mount close to the driver.
- Engineered specifically for sprint car applications
- -6 AN male to male fuel shut off valve
- Designed to be plumbed inline and mount close to the driver
$74.99$87.95More InfoLokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inch(Part #4911000160)x
Lokar Hi-Tech Throttle Cable features a stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying.
Kits come complete with installation instructions.
$579.99$844.95More InfoRussell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit(Part #325641605)x
This fuel pump kit provides a complete electronic fuel system for GM LS-series and Chrysler 5.7 Hemi engine swaps in muscle cars, street rods and off-road vehicles. Kit features an Edelbrock EFI fuel pump, regulator/filter, relay, Russell Pro Flex hose, an assortment of silver and black AN hose end fittings, and all mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.
- For GM/Chevy LS and Chrysler 5.7 Hemi engine swaps into older non-EFI vehicles
- Includes Edelbrock Electric Fuel Pump # 3594
- Includes Edelbrock Fuel Pressure Regulator
- Returnless Fuel System
- Supports up to 450 HP
$421.99More InfoHolley 0-80670 Avenger 670 CFM 4 Barrel Carburetor, Electric Choke(Part #42580670)x
The Holley Street Avenger Model 4150 four barrel carb is the ultimate vacuum secondary street performance upgrade. This 4 barrel carb is street ready right out of the box and features a calibrated electric choke, air and fuel adjustments and built in fuel filters. There are clear sights for easy float adjustments, adjustable vacuum secondaries and four vacuum ports. Plus it has a million mile power valve, is 100% wet flow tested and includes fittings.
- No Trouble quick change vacuum secondaries - up to 6% more acceleration or 5% better fuel economy with simple spring change (springs included)
- Vacuum secondaries allow use on wide variety of vehicles
- Tuneable fuel metering system
- Dual feed fuel inlet
- 1 timed (spark) port, 2 full vacuum, and 1 PCV port
- Ford A/T kickdown, does not work with A.O.D. transmissions
- Calibrated for monster low-end torque, awesome acceleration, & unmatched top-end horsepower
- Bolt on & go design
- Electric choke
$129.99More InfoOTB Gear 4461 Orbit Style Air Cleaner, Offset Base, Polished(Part #2474461)xThe inspiration for "Orbit" came from the the '30's - '40's Ford horn button design. But repeating rings were a very popular design theme by a number of auto builders. Got twin 4's with real tight spacing? The selection of air cleaners for you has been pretty slim, right? Many manifolds out there position the carbs with only 6-7/16" center to center. This variation features a 1/4" offset base to deal with this problem - a simple solution to an old issue. If spacing this tight isn't your problem, we have a straight base also. If running twin carbs, check your center to center spacing. We use our Platinum Series air filter with A-356 aircraft grade castings for a show quality product. The filter media is a medium gray, washable oiled cloth. Prefer to have an unpolished finish? You can have that too. Hardware furnished includes a polished stainless socket drive top screw. Diameter 6-3/4" - Height 4-1/2". Fits carbs with the typical 5" base.
- Washable Filter Media
- 1/4" Offset base plate
- Fits carbs with standard 5-1/8" neck
- Diameter 6-3/4"
- Height 4-1/2"
- Hardware furnished includes a polished stainless socket drive top screw
- Priced and sold as single assembly - purchase 2 for a twin carb application
$149.99More InfoEdelbrock 5001 Small Block Chevy Torker II Intake Manifold(Part #3255001)x
Designed for 1955-86 high-performance 262-400 c.i.d. small-block Chevy V8s operating in the 2500-6500 RPM range. The Torker II is an updated version of original Torker offering better performance. Manifold accepts late-model waterneck, air-conditioning, alternator and H.E.I. distributor.
Will fit Corvette and 1987 and later stock aluminum heads. Will NOT fit 1987 and later cast iron heads and will NOT cover port openings of Chevrolet Bowtie or LT1 heads.
NOT intended for use on heavy vehicles (trucks, vans etc.).
$44.99More InfoSpeedway Aluminum Fuel Log for Demon Carburetor(Part #91011600)x
Ensures adequate fuel pressure to carburetor and helps eliminate fuel starvation problems. Fuel pressure is regulated after carburetor has been supplied and not before. Must use return fuel line to take full advantage of benefits.
Features AN8 inlet and two AN8 outlets. Threaded 3/4" NPT (plugged) on back that can be used for a return line. Also has 1/8" NPT outlet for fuel pressure gauge, fittings sold separately.
$64.99More InfoFlamed Billet-Style Oval Air Cleaners(Part #91011037)x
Theses highly polished aluminum air cleaners have the look of billet without the expense. Available with flame top.
Measures 3" high, 8-3/8" wide. Fits 5-1/8" single quad air horns.
$999.99More InfoEdelbrock Big Block Chevy Dual Quad Set-Up, Rectangular Port(Part #92519917)x
There is nothing sweeter looking or sounding than a dual quad on a Chevy! This one kit gets you two manual choke Edelbrock carbs, an Edelbrock unpolished intake manifold, fuel line and special progressive linkage. Just add a suggested air cleaner to finish your installation.
- 1500-6000 RPM
- Will clear HEI distributors
- Will not fit tall-deck truck blocks
- Has 6-7/16" carb centers
Overall Height from the bottom of the intake to the top of the air cleaners below:
Height from bottom of intake to carb mounting surface: 4.899"
- Port exit dimensions: 1.66" x 2.30
$14.99More InfoSure Seal Air Cleaner Base Only, 14 Inch(Part #91011062-2)x
Speedway's Sure Seal air cleaner base is manufactured from spun aluminum. Fits Holley carbs. Uses standard 14" diameter filters, sold separately. Minimum filter height required is 4".
- Base has a 1-1/2" drop
- Distance from the carb neck to top with .5" spacer and 4" filter = 4.25"
$39.99More InfoNostalgia Spun Aluminum Air Cleaner(Part #91011093)x
This spun aluminum air cleaner fits common 5 1/8" neck 4BBL carburetors and is 8" diameter and 3 7/8" tall. Wing nut sold separately.