Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors stocks all the best names in classic truck carburetors and intake manifolds! Plus, we have a great selection of fuel cells and gas pedals, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N and R2C. Speedway can fuel your need for speed!

"Classic Truck, Accelerator Pedal" Page 1 of 2

  • Ford/Holley 94 Extended Throttle Shaft
    Ford/Holley 94 Extended Throttle Shaft
    x
                

    About the only way your 94 carburetor could have a tight throttle shaft would be if you found a NOS carb somewhere. Now you can build yourself a dual or triple carb three deuce set-up that will run like new. We offer you these new extended throttle shafts that are .282" which is .005" oversize. You simply run a 9/32" drill bit or reamer through the base plate and you now have a tight carb again.

    Includes (4) throttle butterfy plate screws and a 6-32 x 1/4" truss head end screw (slotted head).

  • Quick Release Cable or Linkage End, 1/4-28 RH
    Quick Release Cable or Linkage End, 1/4-28 RH
    x
                These steel ends are perfect for throttle cable or linkage that needs to be quick release. They have the same thread on the stud as they do in the body. 
            
  • Speedway Universal Throttle Linkage Bell Crank Kit
    Speedway Universal Throttle Linkage Bell Crank Kit
    x
                This bell crank kit features 12 mounting holes for multi-arm positioning and can be used in either push or pull type throttle linkages. Center hole is 1/4" diameter for easy mounting. Each arm has 3 holes for various throttle ratios. Includes all hardware needed for installation. 
            
  • Double End Carburetor Linkage, 9 Inches Long
    Double End Carburetor Linkage, 9 Inches Long
    x
                

    3/16" steel rod carburetor linkage with double ends. Thread size is 10-32 RH and LH. For use with 9 Super 7®, Stromberg 97, and Demon 98 carbs.

  • Lokar GPS-6016 1/2 Inch Billet Alum Floor Mount Throttle Pedal Spacer
    Lokar GPS-6016 1/2 Inch Billet Alum Floor Mount Throttle Pedal Spacer
    x
                

    Lokar's throttle pedal spacer is designed for use if the throttle pedal and mounting base need to be mounted further away from the firewall.  They are made specially for Lokar's billet aluminum floor mount Eliminator throttle pedals.

    • 1/2" Thick
    • Designed for extra clearance
    • Quality steel construction
    • For billet aluminum floor mount Eliminator throttle pedals

    Instructions (PDF)

  • Carburetor Throttle Rod Linkage Connector, 3/16 Inch
    Carburetor Throttle Rod Linkage Connector, 3/16 Inch
    x
                

    Throttle rod sleeves can be attached to the ends of throttle rods to complete. Attaches to 3/16" diameter rods.

    For use with Super 97, Stromberg 97, and Demon 98.

  • Billet Aluminum Throttle Pedal
    Billet Aluminum Throttle Pedal
    x
                
    • Polished aluminum construction with a urethane bushing at the center
    • Pedal is spring loaded
    • Serrated shaft allows you to position arm as needed
    • Easily adjust the angle between the two arms a full 360°
    • Pad measures 4.5" x 1.75"
  • Spoon Throttle Pedal, Chrome
    $29.99
    Product Rating: 4.67 Stars
    Spoon Throttle Pedal, Chrome
    x
                You can't go wrong with this chrome plated steel throttle pedal. Splined pivot hub allows easy indexing of arm for use in nearly any vehicle.
            
  • Chrome Steel and Billet Aluminum Throttle Pedal
    Chrome Steel and Billet Aluminum Throttle Pedal
    x
                

    This Speedway throttle pedal features chrome plated arms, a splined shaft for easy indexing of throttle arm, and a spring loaded, satin finish, billet aluminum pedal with rubber inserts for added driving comfort.

    The arms can be swapped from side-to-side on this foot pedal.

  • Speedway Throttle Assembly
    $34.99
    Product Rating: 4.17 Stars
    Speedway Throttle Assembly
    x
                

    Full cam-slot cable action throttle assembly. Cast aluminum base and textured pedal. Assembly includes heavy duty 48" cable and housing clamp.

  • Mr Roadster Hot Rod Pedal, Solid Arm
    Mr Roadster Hot Rod Pedal, Solid Arm
    x
                

    Fully adjusts angle of pedal and arm. Rubber pad inset. New sloted arm design. Chrome.

    This pedal is 6" from pivot to the center of the pedal pad on the spoon.

  • Double End Carburetor Linkage, 7 Inches Long
    Double End Carburetor Linkage, 7 Inches Long
    x
                

    3/16" steel rod carburetor linkage with double ends. This linkage can be adjusted to fit carb spacings approximately 7" to 7-5/8". The threads at the end of the central rod are 10-32 (3/16" fine), RH on one end, LH on the other.

    For use with 9 Super 7, Stromberg 97, and Demon 98 carbs.

  • Speedway Aluminum Throttle Pedal
    Speedway Aluminum Throttle Pedal
    x
                

    Universal cast aluminum pedals are fully adjustable and have a 6-7/8" arm. Throttle cables not included. We recommend universal cable linkage #560-6230. 

    Cable clamp sleeve is included for attachment to the throttle cable.

  • Quick Release Cable or Linkage End, 10-32 RH
    Quick Release Cable or Linkage End, 10-32 RH
    x
                These steel ends are perfect for throttle cable or linkage that needs to be quick release. They have the same thread on the stud as they do in the body. 
            
  • Lokar 6098 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    Lokar 6098 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    x
                

    Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect.  Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket.  Mounts in multiple positions for floor and toe board angles.  Designed with built-in pedal travel stops.   Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Order 48" cable for LS1, Ramjet and Vortec applications.

    • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
    • Mounts in multiple positions for floor and toe board angles
    • Designed with built-in pedal travel stops
    • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
    • Pedal pad is 2” by 6-3/4”
    • Pad is parallelogram in shape and NOT rectangle
    • Brushed billet aluminum finish

    Eliminator Throttle Pedal Installation Instructions (PDF)

     

  • Barefoot Gas Pedal Cover
    $10.99
    Product Rating: 4.50 Stars
    Barefoot Gas Pedal Cover
    x
                A footprint gas pedal chrome detail for your project. Mounts over your original pedal using included bracket.
            
  • Rochester Carb Throttle Linkage Rod Kit, Triple Carb, Progressive
    Rochester Carb Throttle Linkage Rod Kit, Triple Carb, Progressive
    x
                

    This tri-powered factory replacement linkage set for Rochester carbs includes ball bearing joints and new carb throttle body shaft. This linkage kit is for carbs with a small base, 1-7/16 " butterflies. This throttle rod kit is designed to function as a progressive linkage with the center being the primary. It could be locked to work all 3 carbs at the same time if desired but would require correct internal carb components to avoid flooding out the engine during acceleration.  Does not work with after market manifolds.

    • Tri-powered factory replacement linkage set
    • Ball bearing joints
    • Progressive linkage with the center being the primary
    • For Rochester carbs with a small base, 1-7/16 " butterflies
    • Includes ball bearing joints and new carb throttle body shaft
    • Designed to replace the vacuum linkage on factory GM Tri Power setups such as '58-'61 Chevys and Pontiacs
    • Includes a new throttle shaft for the center (primary) carb
    • Linkage connects to the passenger side of the engine
    • Does not work with after market manifolds

    135-6681 Instructions (PDF) 

  • Speedway Hot Rod Pedal, Scalloped Arm
    Speedway Hot Rod Pedal, Scalloped Arm
    x
                The angle of this scalloped throttle pedal is fully adjustable. Chrome steel construction with a rubber pad insert. Features 3 cable mounting holes 1/2" apart.
            
  • Lokar BAG-6085 73-98 Chevy Truck Billet Aluminum Throttle Pad w/Rubber
    Lokar BAG-6085 73-98 Chevy Truck Billet Aluminum Throttle Pad w/Rubber
    x
                

    These direct replacement throttle pads for 1973 - 1998 Chevy Truck feature rubber inserts and measure 2"x5".  These billet aluminum pads are available in a brushed finish.

    • Mounts onto factory arm and spring
    • Quick and Easy Installation
    • Available in brushed finish

    Throttle Pedal Pad Installation Instructions (PDF)

  • Shotgun Bill Deluxe Linkage Kit
    Shotgun Bill Deluxe Linkage Kit
    x
                

     This kit will include a link to connect 2 carbs together.  Also included is a link to tie the butterfly arm into the carb linkage to operate the butterflies in conjunction with the throttle linkage.

     135-1990 Instructions (PDF)

  • Carburetor Throttle Rod Linkage Connector, 1/4 Inch
    Carburetor Throttle Rod Linkage Connector, 1/4 Inch
    x
                

    Throttle rod sleeves can be attached to the ends of throttle rods to complete. Attaches to 1/4" diameter rods.

    For use with 9 Super 7, Stromberg 97, and Demon 98 carbs.

  • Demon 4 Barrel Carburetor Throttle Stop
    Demon 4 Barrel Carburetor Throttle Stop
    x
                Think of how many times you cycle the throttle pedal in the course of a year and how hard you mash it. Putting a stop in front of the throttle arm keeps the arm from over traveling which bends the arm, butterflies and shaft, plus it helps reduce wear on the base plate. 

    These are not so much a driving aid, but money saver. Fits Barry Grant Demon 4 bbl carburetors.

  • Lokar 6097 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    Lokar 6097 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    x
                

    Recipient of NSRA best new product, Lokar's Eliminator Throttle Floor Mount Pedal is designed with the signature Lokar quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops.

    • Recipient of NSRA best new product
    • Eliminates routing cables through firewall
    • Billet aluminum splined adjustable shaft
    • Stainless steel "under-the-floor" cable mounting bracket
    • Mounts in multiple positions
    • Built-in pedal travel stops

    Note: These throttle pedals require 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications. Order 48" cable for LS1 Ramjet and Vortec applications.

  • Lokar XSPO-6070 Steel Spoon Throttle Pedal Assembly, Black
    Lokar XSPO-6070 Steel Spoon Throttle Pedal Assembly, Black
    x
                

    Nostalgic hot rod style is exhibited with Lokar's Spoon Throttle Pedal. The pedal is designed with the same quality as demonstrated in other Lokar Throttle assemblies. The removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.

    • Nostalgic hot rod style
    • Quality steel construction
    • Splined lower arm can be mounted on either side of bracket
    • Black finish

    Throttle Pedal Assembly Installation Instructions (PDF)

  • Rochester 2G Extended Primary Carb Shaft
    Rochester 2G Extended Primary Carb Shaft
    x
                

    Extended throttle shaft for Rochester 2G or 2GC carbs. For use in primary carbs in tri-power three deuce setups with progressive linkage. Fits "small base" Rochester 2 barrel carburetors w/ 1.6" throttle bore centers used on 1950's thru approximately 1968 GM cars.

    Use with factory throttle plates or aftermarket plates.

    • Shaft Groove:  .039"
    • Factory throttle arm end to 1st butterfly screw hole center:  1.725"
    • Butterfly Screw Hole Centers:  11/16"  (.685")
  • Lokar BAG-6004 Brushed Billet Aluminum Throttle Pedal w/ Rubber
    Lokar BAG-6004 Brushed Billet Aluminum Throttle Pedal w/ Rubber
    x
                Lokars billet aluminum throttle pedal has spring-loaded pad like OEM  design.            Removable lower arm is splined for versatility in mounting to  the right or left of the mounting bracket.  Lokar's exclusive upper arm  is a one-piece design. Shaft and arm are one piece, requiring no pins.
            
  • Lokar SPO-6070 Steel Spoon Throttle Pedal Assembly, Chrome Finish
    Lokar SPO-6070 Steel Spoon Throttle Pedal Assembly, Chrome Finish
    x
                

    Nostalgic hot rod style is exhibited with Lokar's Spoon Throttle Pedal. The pedal is designed with the same quality as demonstrated in other Lokar Throttle assemblies. The removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.

    • Nostalgic hot rod style
    • Quality steel construction
    • Splined lower arm can be mounted on either side of bracket
    • Chrome finish 

    49106070 Installation Instructions (PDF)

  • Lokar DBW-6012 Brushed Billet Aluminum Drive-By-Wire Throttle Pedal
    Lokar DBW-6012 Brushed Billet Aluminum Drive-By-Wire Throttle Pedal
    x
                Billet aluminum pedals for use with Lokar drive-by-wire throttle control modules. Pedals feature a splined adjustable mount, spring-loaded return, and rubber pad inserts.
            
  • Lokar BAG-6104 Standard Oval Throttle Pedal, Brushed Billet Aluminum
    Lokar BAG-6104 Standard Oval Throttle Pedal, Brushed Billet Aluminum
    x
                

    These oval billet aluminum throttle pedals come in a standard size. The throttle pedal is spring-loaded with a removable lower arm that is splined for versatility and can be mounted to the right or left of the mounting bracket. The shaft and arm are one piece – requiring no pins. Rubber inserts provide foot traction for safety. 

    • Spring-loaded pedal
    • Lower arm can be mounted to the right or left of the mounting bracket
    • Rubber inserts provide foot traction for safety
    • Brushed Billet Aluminum finish

    4916104 Installation Instructions (PDF)

  • Spoon Throttle Pedal, Black Chrome
    Spoon Throttle Pedal, Black Chrome
    x
                You can't go wrong with this sleek black chrome steel throttle pedal. Splined pivot hub allows easy indexing of arm for use in nearly any vehicle.
            
  • Lokar XBAG-6004 Standard Black Billet Aluminum Throttle Pedal w/Rubber
    Lokar XBAG-6004 Standard Black Billet Aluminum Throttle Pedal w/Rubber
    x
                

    Billet aluminum throttle pedal has spring-loaded pad like OEM design. Removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket. Lokar's exclusive upper arm is a one-piece design. Shaft and arm are one piece, requiring no pins.

    • Billet aluminum
    • Spring-loaded pad like OEM design
    • Splined lower arm can be mounted on either side of bracket
    • One-piece design upper arm

    XL and Standard Pedal Comparison Chart (Link)

    49106004 Installation Instructions (PDF)

  • Lokar BFG-6012 XL Series Billet Alum Throttle Pedal w/Rubber Inserts
    Lokar BFG-6012 XL Series Billet Alum Throttle Pedal w/Rubber Inserts
    x
                

    Lokars aluminum throttle pedal has spring-loaded pad like OEM design. Removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket. Lokar's exclusive upper arm is a one-piece design. Shaft and arm are one piece, requiring no pins.

    • Extra Large throttle pedal
    • Billet aluminum
    • Spring-loaded pad like OEM design
    • Splined lower arm can be mounted on either side of bracket
    • One-piece design upper arm

    XL and Standard Pedal Comparison Chart (Link)

    49106012 Installation Instructions (PDF)

     

  • Lokar XBAG-6148 Competitor Centered Aluminum Throttle Pedal Assembly
    Lokar XBAG-6148 Competitor Centered Aluminum Throttle Pedal Assembly
    x
                Please view the product's page for more information
            
  • Lokar BAG-6165 71-72 Chevy/GMC C10 Billet Alum Throttle Pedal Assembly
    Lokar BAG-6165 71-72 Chevy/GMC C10 Billet Alum Throttle Pedal Assembly
    x
                

    These direct replacement throttle assemblies for 1971-1972 Chevy Truck feature rubber inserts and are designed to convert original rod linkage to Lokar's modern throttle cable system. They are designed to mount in original firewall location with offset bezel washers to align cable through firewall. The arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad. The throttle pad is spring-loaded like OEM design and measures 2" x 5". These billet aluminum assemblies are available in a brushed finish.

    • Direct replacement (mounts into the factory location)
    • Billet aluminum construction
    • Adjustable upper and lower arms
    • 48 tooth fine spline
    • Delrin bushings for smooth operation
    • Compatible with Lokar cables
    • Brushed finish

      * Replaces factory rod linkage with cable linkage

    4916165 Installation Instructions (PDF)

  • Quick Release Cable or Linkage End, 3/8-24 RH
    Quick Release Cable or Linkage End, 3/8-24 RH
    x
                These steel ends are perfect for throttle cable or linkage that needs to be quick release. They have the same thread on the stud as they do in the body. 
            
  • Stromberg 97 Extended Throttle Shaft, .282 Inch Diameter
    Stromberg 97 Extended Throttle Shaft, .282 Inch Diameter
    x
                

    About the only way your 97 could have a tight throttle shaft would be if you found a NOS carb somewhere. Now you can build yourself a dual or triple carb three deuce set-up that will run like new. We offer you these new extended throttle shafts that are .282", which is .005" oversize. You simply run a 9/32" drill bit or reamer through the base plate and you now have a tight carb again.

    • Extended throttle shaft
    • .282" which is .005" oversize
    • Fits 97-style carbs with throttle bore centers of 1.333"
    • Threaded screw hole & machined step to work with OEM throttle linkage
    • Stub shaft to clamp a linkage arm onto it for multi-carb linkage
    • Butterfly screws included
    • Brass construction
    • Threaded End to Center of 1st Butterfly Screw Hole:  1-5/16"

    910-11591 Instructions (PDF)

  • Lokar GPS-6015 1/2 Inch Brushed Throttle Pedal Spacer for Steel Pedals
    Lokar GPS-6015 1/2 Inch Brushed Throttle Pedal Spacer for Steel Pedals
    x
                

    Lokar throttle pedal spacer is designed for use if the throttle pedal and mounting base needs to be mounted further away from the firewall.  Made specially for steel throttle pedals.

    • 1/2" Thick
    • Brushed Chrome
    • Designed for extra clearance
    • Quality steel construction
    • For steel throttle pedals
  • Edelbrock 1481 Mopar Throttle Level Adapter
    Edelbrock 1481 Mopar Throttle Level Adapter
    x
                Throttle Lever Adapter 325-1481 fits 1966 and later Chryslers. Accepts cruise control. Use with appropriate throttle cable  plate when necessary. Available in gold iridited  finish to match Edelbrock  Performer Series Carbs.
            
  • Speedway Rochester Tri-Power Throttle Linkage, Progressive
    Speedway Rochester Tri-Power Throttle Linkage, Progressive
    x
                

    This tri-powered replacement linkage set for Rochester carbs features ball bearing joints needed to create a progressive tri-power linkage. 

    • Tri-powered factory replacement linkage set
    • Ball bearing joints
    • For Rochester carbs with a small base

    WARNING:This is to only be used with our Rochester 2G Tri Power base kit (#991011589). It will not work with any other carb/intake combinations.

  • Lokar XBAG-6149 Competitor Vertical Offset Throttle Pedal Assembly
    Lokar XBAG-6149 Competitor Vertical Offset Throttle Pedal Assembly
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2