Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 6

Products

Accelerator Pedal

Shop Classic Truck Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the best names in classic truck carburetors and intake manifolds! Plus, we have a great selection of fuel cells and gas pedals, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N and R2C. Speedway can fuel your need for speed!

Featured Products
  • Lokar XBAG-6151 Midnight Series Lakester Steel Throttle Pedal
    Lokar XBAG-6151 Midnight Series Lakester Steel Throttle Pedal
    (Part #491XBAG6151)
    x
                

    Lakester hot rod pedal styling is a continuation of the many nostalgic products we offer at Lokar. The pedals have the same quality you have come to expect from its sister steel spoon throttle pedal and round brake/clutch pad. The removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.

    • Lakester pedals feature curved pads and arms.
    • This unique pedal design will give your favorite vehicle an all new look.
    • The throttle pedal is designed using Delrin bushings for smooth operation when throttling up or down during daily use.
  • Quick Release Cable or Linkage End, 1/4-28 RH
    Quick Release Cable or Linkage End, 1/4-28 RH
    (Part #1750601)
    x
                These steel ends are perfect for throttle cable or linkage that needs to be quick release. They have the same thread on the stud as they do in the body. 
            
  • Ford/Holley 94 Extended Throttle Shaft
    Ford/Holley 94 Extended Throttle Shaft
    (Part #91011592)
    x
                

    About the only way your 94 carburetor could have a tight throttle shaft would be if you found a NOS carb somewhere. Now you can build yourself a dual or triple carb three deuce set-up that will run like new. We offer you these new extended throttle shafts that are .282" which is .005" oversize. You simply run a 9/32" drill bit or reamer through the base plate and you now have a tight carb again.

    Includes (4) throttle butterfy plate screws and a 6-32 x 1/4" truss head end screw (slotted head).

  • Spoon Throttle Pedal, Chrome
    $29.99
    Product Rating: 4.78 Stars
    Spoon Throttle Pedal, Chrome
    (Part #91655011)
    x
                You can't go wrong with this chrome plated steel throttle pedal. Splined pivot hub allows easy indexing of arm for use in nearly any vehicle.
            
  • Speedway Universal Throttle Linkage Bell Crank Kit
    Speedway Universal Throttle Linkage Bell Crank Kit
    (Part #5501523)
    x
                This bell crank kit features 12 mounting holes for multi-arm positioning and can be used in either push or pull type throttle linkages. Center hole is 1/4" diameter for easy mounting. Each arm has 3 holes for various throttle ratios. Includes all hardware needed for installation. 
            
  • Lokar GPS-6016 1/2 Inch Billet Alum Floor Mount Throttle Pedal Spacer
    Lokar GPS-6016 1/2 Inch Billet Alum Floor Mount Throttle Pedal Spacer
    (Part #49106016)
    x
                

    Lokar's throttle pedal spacer is designed for use if the throttle pedal and mounting base need to be mounted further away from the firewall.  They are made specially for Lokar's billet aluminum floor mount Eliminator throttle pedals.

    • 1/2" Thick
    • Designed for extra clearance
    • Quality steel construction
    • For billet aluminum floor mount Eliminator throttle pedals

    Instructions (PDF)

  • Double End Carburetor Linkage, 9 Inches Long
    Double End Carburetor Linkage, 9 Inches Long
    (Part #5601006)
    x
                

    3/16" steel rod carburetor linkage with double ends. Thread size is 10-32 RH and LH. For use with 9 Super 7®, Stromberg 97, and Demon 98 carbs.

  • Carburetor Throttle Rod Linkage Connector, 3/16 Inch
    Carburetor Throttle Rod Linkage Connector, 3/16 Inch
    (Part #5601007)
    x
                

    Throttle rod sleeves can be attached to the ends of throttle rods to complete. Attaches to 3/16" diameter rods.

    For use with Super 97, Stromberg 97, and Demon 98.

Filter

"Classic Truck, Accelerator Pedal" Page 1 of 6

Page 1 of 6

  • Lokar XDBW-6004 Midnight Series Drive-by-Wire Aluminum Throttle Pedal
    Lokar XDBW-6004 Midnight Series Drive-by-Wire Aluminum Throttle Pedal
    (Part #491XDBW6004)
    x
                Lokar has partnered with Williams Controls the world leader in heavy duty electronic throttle pedals.
    Features:
    • The first programmable electronic throttle pedal (Drive- By- Wire) for the automotive aftermarket
    • Programmable Non-Contact (Solid State) hall effect sensor for most GM, Ford & Mopar applications
    • Splined pedal arm for versatile mounting
    • All metal construction; Aluminum and Stainless Steel
    • 3 times better performance over standard OEM pedals
    • Over 90 years of combined throttle pedal experience
    • Sensor programmed on pedal to optimize electrical output for quick throttle response (No pedal lag)
    • Brushed or black finish
  • Lokar XBAG-6085 Midnight Series 73-98 Chevy Truck Throttle Pad, Rubber
    Lokar XBAG-6085 Midnight Series 73-98 Chevy Truck Throttle Pad, Rubber
    (Part #491XBAG6085)
    x
                
    • Mounts onto factory arm and spring
    • Quick and Easy Installation
    • Available in black finish
  • Lokar BAG-6085 73-98 Chevy Truck Billet Aluminum Throttle Pad w/Rubber
    Lokar BAG-6085 73-98 Chevy Truck Billet Aluminum Throttle Pad w/Rubber
    (Part #4916085)
    x
                

    These direct replacement throttle pads for 1973 - 1998 Chevy Truck feature rubber inserts and measure 2"x5".  These billet aluminum pads are available in a brushed finish.

    • Mounts onto factory arm and spring
    • Quick and Easy Installation
    • Available in brushed finish

    Throttle Pedal Pad Installation Instructions (PDF)

  • Lokar FMG-6098 Eliminator Floor Mount Throttle Pedal, Billet Alum
    Lokar FMG-6098 Eliminator Floor Mount Throttle Pedal, Billet Alum
    (Part #4916098)
    x
                

    Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect.  Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket.  Mounts in multiple positions for floor and toe board angles.  Designed with built-in pedal travel stops.   Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Order 48" cable for LS1, Ramjet and Vortec applications.

    • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
    • Mounts in multiple positions for floor and toe board angles
    • Designed with built-in pedal travel stops
    • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
    • Pedal pad is 2” by 6-3/4”
    • Pad is parallelogram in shape and NOT rectangle
    • Brushed billet aluminum finish

    Eliminator Throttle Pedal Installation Instructions (PDF)

     

  • Barefoot Gas Pedal Cover
    $10.99
    Product Rating: 4.20 Stars
    Barefoot Gas Pedal Cover
    (Part #7208520)
    x
                A footprint gas pedal chrome detail for your project. Mounts over your original pedal using included bracket.
            
  • Lokar XDBW-6016 Midnight Series Drive-by-Wire XL Steel Throttle Pedal
    Lokar XDBW-6016 Midnight Series Drive-by-Wire XL Steel Throttle Pedal
    (Part #491XDBW6016)
    x
                Lokar has partnered with Williams Controls the world leader in heavy duty electronic throttle pedals.
    Features:
    • The first programmable electronic throttle pedal (Drive- By- Wire) for the automotive aftermarket
    • Programmable Non-Contact (Solid State) hall effect sensor for most GM, Ford & Mopar applications
    • Splined pedal arm for versatile mounting
    • All metal construction; Aluminum and Stainless Steel
    • 3 times better performance over standard OEM pedals
    • Over 90 years of combined throttle pedal experience
    • Sensor programmed on pedal to optimize electrical output for quick throttle response (No pedal lag)
    • Brushed or black finish
  • Lokar XDBW-6103 Midnight Series Drive-by-Wire Mini Oval Throttle Pedal
    Lokar XDBW-6103 Midnight Series Drive-by-Wire Mini Oval Throttle Pedal
    (Part #491XDBW6103)
    x
                Lokar has partnered with Williams Controls the world leader in heavy duty electronic throttle pedals.
    Features:
    • The first programmable electronic throttle pedal (Drive- By- Wire) for the automotive aftermarket
    • Programmable Non-Contact (Solid State) hall effect sensor for most GM, Ford & Mopar applications
    • Splined pedal arm for versatile mounting
    • All metal construction; Aluminum and Stainless Steel
    • 3 times better performance over standard OEM pedals
    • Over 90 years of combined throttle pedal experience
    • Sensor programmed on pedal to optimize electrical output for quick throttle response (No pedal lag)
    • Brushed or black finish
  • Lokar XDBW-6104 Midnight Series Drive-by-Wire Oval Throttle Pedal, Rub
    Lokar XDBW-6104 Midnight Series Drive-by-Wire Oval Throttle Pedal, Rub
    (Part #491XDBW6104)
    x
                Lokar has partnered with Williams Controls the world leader in heavy duty electronic throttle pedals.
    Features:
    • The first programmable electronic throttle pedal (Drive- By- Wire) for the automotive aftermarket
    • Programmable Non-Contact (Solid State) hall effect sensor for most GM, Ford & Mopar applications
    • Splined pedal arm for versatile mounting
    • All metal construction; Aluminum and Stainless Steel
    • 3 times better performance over standard OEM pedals
    • Over 90 years of combined throttle pedal experience
    • Sensor programmed on pedal to optimize electrical output for quick throttle response (No pedal lag)
    • Brushed or black finish
  • Lokar XBAG-6182 Midnight Series 66-77 Bronco Throttle Pedal Pad w/Rub
    Lokar XBAG-6182 Midnight Series 66-77 Bronco Throttle Pedal Pad w/Rub
    (Part #491XBAG6182)
    x
                For a compact and clean look. Add style and function to your classic car. Designed with hidden screws. Curved to match and bolt directly to the factory pedal. Brushed billet aluminum with rubber inserts. Made in the U.S.A. Lifetime warranty.
    • For A Compact And Clean Look
    • Add Style And Function To Your Classic Car
    • Designed With Hidden Screws
    • Curved To Match And Bolt Directly To Factory Pedal
    • Black Anodized Aluminum w/Rubber Inserts
    • Lifetime Warranty
  • Lokar BAG-6105 XL Oval Billet Aluminum Throttle Pedal, Brushed
    Lokar BAG-6105 XL Oval Billet Aluminum Throttle Pedal, Brushed
    (Part #491BAG6105)
    x
                
    • XL series ball milled billet aluminum throttle pedals are designed just like our standard throttle assemblies, but it is extra large for those seeking more comfort and safety. Throttle pedal pad is spring-loaded like the OEM design. The removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.
    • Rubber Inserts Provide Foot Traction For Safety
    • Brushed Billet Aluminum
    • Made In The U.S.A.
    • Lifetime Warranty
  • Lokar DBW-6001 Drive-by-Wire Billet Alum. Spring-Loaded Throttle Pedal
    Lokar DBW-6001 Drive-by-Wire Billet Alum. Spring-Loaded Throttle Pedal
    (Part #491DBW6001)
    x
                

    Lokar has partnered with Williams Controls the world leader in heavy duty electronic throttle pedals.
    Features:

    The first programmable electronic throttle pedal (Drive- By- Wire) for the automotive aftermarket

    • Programmable Non-Contact (Solid State) hall effect sensor for most GM, Ford & Mopar applications
    • Splined pedal arm for versatile mounting
    • All metal construction; Aluminum and Stainless Steel
    • 3 times better performance over standard OEM pedals
    • Over 90 years of combined throttle pedal experience
    • Sensor programmed on pedal to optimize electrical output for quick throttle response (No pedal lag)
    • Brushed or black finish
  • Lokar BAG-6182 1966-77 Ford Bronco Billet Alum Throttle Pedal w/Rubber
    Lokar BAG-6182 1966-77 Ford Bronco Billet Alum Throttle Pedal w/Rubber
    (Part #491BAG6182)
    x
                For a compact and clean look. Add style and function to your classic car. Designed with hidden screws. Curved to match and bolt directly to the factory pedal. Brushed billet aluminum with rubber inserts. Made in the U.S.A. Lifetime warranty.
    • For A Compact And Clean Look
    • Add Style And Function To Your Classic Car
    • Designed With Hidden Screws
    • Curved To Match And Bolt Directly To Factory Pedal
    • Black Anodized Aluminum w/Rubber Inserts
    • Lifetime Warranty
  • Lokar XDBW-6007 Midnight Series Drive-by-Wire Steel Throttle Pedal
    Lokar XDBW-6007 Midnight Series Drive-by-Wire Steel Throttle Pedal
    (Part #491XDBW6007)
    x
                Lokar has partnered with Williams Controls the world leader in heavy duty electronic throttle pedals.
    Features:
    • The first programmable electronic throttle pedal (Drive- By- Wire) for the automotive aftermarket
    • Programmable Non-Contact (Solid State) hall effect sensor for most GM, Ford & Mopar applications
    • Splined pedal arm for versatile mounting
    • All metal construction; Aluminum and Stainless Steel
    • 3 times better performance over standard OEM pedals
    • Over 90 years of combined throttle pedal experience
    • Sensor programmed on pedal to optimize electrical output for quick throttle response (No pedal lag)
    • Brushed or black finish
  • Carburetor Throttle Rod Linkage Connector, 1/4 Inch
    Carburetor Throttle Rod Linkage Connector, 1/4 Inch
    (Part #5601008)
    x
                

    Throttle rod sleeves can be attached to the ends of throttle rods to complete. Attaches to 1/4" diameter rods.

    For use with 9 Super 7, Stromberg 97, and Demon 98 carbs.

  • Demon 4 Barrel Carburetor Throttle Stop
    Demon 4 Barrel Carburetor Throttle Stop
    (Part #91011552)
    x
                Think of how many times you cycle the throttle pedal in the course of a year and how hard you mash it. Putting a stop in front of the throttle arm keeps the arm from over traveling which bends the arm, butterflies and shaft, plus it helps reduce wear on the base plate. 
    • Will not fit vacuum secondary Demon Carbs
    • Fits Barry Grant Demon 4 bbl carburetors
    • Prevents broken trhottle arms
    • Aluminum contruction
  • Lokar BAG-6149 Billet Alum Competitor Throttle Pedal, Rubber, Offset
    Lokar BAG-6149 Billet Alum Competitor Throttle Pedal, Rubber, Offset
    (Part #491BAG6149)
    x
                
    • Designed With A Unique Internal Spanner Nut
    • Ensuring Perfect Pedal Tension
    • Incredibly Sturdy Mounting Base
    • Mounting Base Is Mounted To A Thick Steel Plate
    • Use Factory Mounting Locations w/o Modification
    • Billet Aluminum w/Rubber Insert
    • Most Versatile Throttle Pedal Available
    • Eliminate The Possibility Of Excess Slop
  • Lokar FMG-6097 Eliminator Floor Mount Throttle Pedal, Billet Alum
    Lokar FMG-6097 Eliminator Floor Mount Throttle Pedal, Billet Alum
    (Part #4916097)
    x
                

    Recipient of NSRA best new product, Lokar's Eliminator Throttle Floor Mount Pedal is designed with the signature Lokar quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops.

    • Recipient of NSRA best new product
    • Eliminates routing cables through firewall
    • Billet aluminum splined adjustable shaft
    • Stainless steel "under-the-floor" cable mounting bracket
    • Mounts in multiple positions
    • Built-in pedal travel stops

    Note: These throttle pedals require 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications. Order 48" cable for LS1 Ramjet and Vortec applications.

  • Lokar XBAG-6165 Midnight Series 71-72 Chevy/GMC C-10 Throttle Pedal
    Lokar XBAG-6165 Midnight Series 71-72 Chevy/GMC C-10 Throttle Pedal
    (Part #491XBAG6165)
    x
                Available for 1967-1970* and 1971-1972
    Throttle Pedals Feature:
    • Direct replacement (mounts into the factory location)
    • Billet aluminum construction
    • Adjustable upper and lower arms
    • 48 tooth fine spline
    • Delrin bushings for smooth operation
    • Compatible with Lokar cables
    • Brushed or black finish
        * Replaces factory rod linkage with cable linkage
    Curved Pedal Pads Feature:
    • Direct replacement
    • Curved to match and bolt directly onto factory steel
    • brake/clutch pedal arms
    • Billet aluminum construction
    • Hidden screws
    • Rubber inserts for added traction
    • Brushed or black finish
  • Lokar XSPO-6070 Steel Spoon Throttle Pedal Assembly, Black
    Lokar XSPO-6070 Steel Spoon Throttle Pedal Assembly, Black
    (Part #49116070)
    x
                

    Nostalgic hot rod style is exhibited with Lokar's Spoon Throttle Pedal. The pedal is designed with the same quality as demonstrated in other Lokar Throttle assemblies. The removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.

    • Nostalgic hot rod style
    • Quality steel construction
    • Splined lower arm can be mounted on either side of bracket
    • Black finish

    Throttle Pedal Assembly Installation Instructions (PDF)

  • Lokar DBW-6004 Drive-by-Wire Billet Aluminum Throttle Pedal w/Rubber
    Lokar DBW-6004 Drive-by-Wire Billet Aluminum Throttle Pedal w/Rubber
    (Part #491DBW6004)
    x
                

    Lokar has partnered with Williams Controls the world leader in heavy duty electronic throttle pedals.
    Features:

    The first programmable electronic throttle pedal (Drive- By- Wire) for the automotive aftermarket

    • Programmable Non-Contact (Solid State) hall effect sensor for most GM, Ford & Mopar applications
    • Splined pedal arm for versatile mounting
    • All metal construction; Aluminum and Stainless Steel
    • 3 times better performance over standard OEM pedals
    • Over 90 years of combined throttle pedal experience
    • Sensor programmed on pedal to optimize electrical output for quick throttle response (No pedal lag)
    • Brushed or black finish
Goto Previous PagePrevious Page
1 2 3 4 5 6